Osseous tissue engineering with gene therapy for facial bone reconstruction

Realizing the potential of gene-based molecular therapies in bone repair

A better understanding of osteogenesis at genetic and biochemical levels is yielding new molecular entities that can modulate bone regeneration and potentially act as novel therapies in a clinical setting. These new entities are motivating alternative approaches for bone repair by utilizing DNA-derived expression systems, as well as RNA-based regulatory molecules controlling the fate of cells involved in osteogenesis. These sophisticated mediators of osteogenesis, however, pose unique delivery challenges that are not obvious in deployment of conventional therapeutic agents. Viral and nonviral delivery systems are actively pursued in preclinical animal models to realize the potential of the gene-based medicines. This article will summarize promising bone-inducing molecular agents on the horizon as well as provide a critical review of delivery systems employed for their administration. Special attention was paid to synthetic (nonviral) delivery systems because they are more likely to be adopted for clinical testing because of safety considerations. We present a comparative analysis of dose-response relationships, as well as pharmacokinetic and pharmacodynamic features of various approaches, with the purpose of clearly defining the current frontier in the field. We conclude with the authors' perspective on the future of gene-based therapy of bone defects, articulating promising research avenues to advance the field of clinical bone repair.

Dermis isolated adult stem cells for cartilage tissue engineering

Adult stem cells from the dermal layer of skin are an attractive alternative to primary cells for meniscus engineering, as they may be easily obtained and used autologously. Recently, chondroinducible dermis cells from caprine skin have shown promising characteristics for cartilage tissue engineering. In this study, their multilineage differentiation capacity is determined, and methods of expanding and tissue engineering these cells are investigated. It was found that these cells could differentiate along adipogenic, osteogenic, and chondrogenic lineages, allowing them to be termed dermis isolated adult stem cells (DIAS cells). Focusing on cartilage tissue engineering, it was found that passaging these cells in chondrogenic medium and forming them into self-assembled tissue engineered constructs caused upregulation of collagen type II and COMP gene expression. Further investigation showed that applying transforming growth factor β1 (TGF-β1) or bone morphogenetic protein 2 (BMP-2) to DIAS constructs caused increased sulfated glycosaminoglycan content. Additionally, TGF-β1 treatment caused significant increases in compressive properties and construct contraction. In contrast, BMP-2 treatment resulted in the largest constructs, but did not increase compressive properties. These results show that DIAS cells can be easily manipulated for cartilage tissue engineering strategies, and may also be a useful cell source for other mesenchymal tissues.

Manipulation of miRNA activity accelerates osteogenic differentiation of hMSCs in engineered 3D scaffolds

Cell-based tissue engineering strategies have shown tremendous promise for the repair of bone mass deficiencies, but the efficient and appropriate induction of stem cells down osteogenic pathways remains a significant roadblock to the effective implementation of cell-based therapies. When grown in culture, human Mesenchymal Stromal/Stem Cells (hMSCs) remain multipotent, requiring specific exogenous signals to induce osteogenic differentiation. hMSCs used in transplantations, therefore, must be presented with local signals, often provided by the host's own tissues, to be directed down bone-related lineages. This process is relatively inefficient and remains difficult to control. In an effort to enhance osteogenesis, hMSCs were transfected with specific miRNA mimics and inhibitors that had originally identified for their ability to increase Alkaline Phosphatase (ALP) activity. Transfection with miRNA reagents had the effect of sensitizing hMSCs to soluble osteogenic factors, resulting in a rapid and robust induction of bone-related markers, including ALP activity and calcium deposition. Synthetic 3D tissue constructs prepared with miRNA-transfected hMSCs demonstrated similar responses to soluble osteogenic signals, suggesting that controlling miRNA activity in hMSCs can be an effective tool for enhancing the induction of osteogenesis for tissue engineering purposes. Copyright © 2011 John Wiley & Sons, Ltd.

A genome-wide linkage scan for quantitative trait loci influencing the craniofacial complex in humans (Homo sapiens sapiens)

The genetic architecture of the craniofacial complex has been the subject of intense scrutiny because of the high frequency of congenital malformations. Numerous animal models have been used to document the early development of the craniofacial complex, but few studies have focused directly on the genetic underpinnings of normal variation in the human craniofacial complex. This study examines 80 quantitative traits derived from lateral cephalographs of 981 participants in the Fels Longitudinal Study, Wright State University, Dayton, Ohio. Quantitative genetic analyses were conducted using the Sequential Oligogenic Linkage Analysis Routines analytic platform, a maximum-likelihood variance components method that incorporates all familial information for parameter estimation. Heritability estimates were significant and of moderate to high magnitude for all craniofacial traits. Additionally, significant quantitative trait loci (QTL) were identified for 10 traits from the three developmental components (basicranium, splanchnocranium, and neurocranium) of the craniofacial complex. These QTL were found on chromosomes 3, 6, 11, 12, and 14. This study of the genetic architecture of the craniofacial complex elucidates fundamental information of the genetic architecture of the craniofacial complex in humans.

Digoxigenin modification of adenovirus to spatially control gene delivery from chitosan surfaces

To spatially control the delivery of multiple viral vectors from biomaterial scaffolds, digoxigenin (DIG) was conjugated to adenoviral capsid proteins as an antigenic determinant for antibody immobilization. The infectivity, toxicity, specificity and immobilization stability of DIG-modified adenovirus were examined to investigate the feasibility and effectiveness of this viral surface modification. Anti-DIG antibody conjugated on chitosan surfaces was able to immobilize DIG-modified adenovirus and could be stably bound on the material for at least two weeks, yet the modification was mild enough that viral infectivity was maintained. To immobilize two different adenoviruses, wax masking was applied to conjugate anti-DIG and anti-adenovirus antibodies in two discrete regions of a chitosan film. The distribution of these two viral vectors expressing different reporter genes was examined after cell culture. Fluorescent protein expression from transduced cells illustrated that the infection distribution could be controlled: one gene was delivered to the entire region of the biomaterial, and another was only delivered to defined regions. Compared to three other cardiac glycosides, ATPase inhibition was undetectable when DIG was conjugated on the adenovirus, suggesting that the method may be safe for in vivo application. This dual viral vector delivery system should be capable of generating distinct interfaces between cell signaling viruses to control tissue regeneration from a range of different biomaterials.

Gene Therapy to Enhance Condylar Growth Using rAAV-VEGF

Objective: To test the hypothesis that the introduction of specific vascular growth inducting genes would favorably affect mandibular condylar growth in Sprague-Dawley (SD) rats over a limited experimental period. Therefore, the aim of this study is to examine the effect of gene therapy on condylar growth by means of a morphological assessment.

Materials and Methods: Ninety 35-day-old female SD rats were randomly divided into three groups, which received any of the injections of recombinant adeno-associated virus mediated vascular endothelial growth factor (rAAV-VEGF), rAAV mediated enhanced green fluorescence protein (rAAV-eGFP), or phosphate-buffered saline (PBS) into both mandibular condyles. Each group of rats was sacrificed on the following experimental days: 7, 14, 21, 30, and 60. Left halves of the mandibles were isolated and digital pictures were obtained in a standardized manner.

Results: The length of condylar process (B-F) as well as mandibular length (A-F) significantly increased on day 30 and continued to increase until the end of the experiment. Moreover, the width of condyle (Q-R) had increased significantly from day 30 and lasted to day 60. Condylar length (C-D) was found to be significantly longer on day 60.

Conclusions: Gene therapy with VEGF stimulates condylar growth at will. The rAAV-VEGF is an excellent candidate for future gene therapy to induce mandibular growth.

Gene therapy used for tissue engineering applications

This review highlights the advances at the interface between tissue engineering and gene therapy. There are a large number of reports on gene therapy in tissue engineering, and these cover a huge range of different engineered tissues, different vectors, scaffolds and methodology. The review considers separately in-vitro and in-vivo gene transfer methods. The in-vivo gene transfer method is described first, using either viral or non-viral vectors to repair various tissues with and without the use of scaffolds. The use of a scaffold can overcome some of the challenges associated with delivery by direct injection. The ex-vivo method is described in the second half of the review. Attempts have been made to use this therapy for bone, cartilage, wound, urothelial, nerve tissue regeneration and for treating diabetes using viral or non-viral vectors. Again porous polymers can be used as scaffolds for cell transplantation. There are as yet few comparisons between these many different variables to show which is the best for any particular application. With few exceptions, all of the results were positive in showing some gene expression and some consequent effect on tissue growth and remodelling. Some of the principal advantages and disadvantages of various methods are discussed.

Localized viral vector delivery to enhance in situ regenerative gene therapy

A lyophilization method was developed to locally release adenoviral vectors directly from biomaterials for in situ regenerative gene therapy. Adenovirus expressing a beta-galactosidase reporter gene (AdLacZ) was mixed with different excipient formulations and lyophilized on hydroxyapatite (HA) disks followed by fibroblasts culturing and 5-bromo-4-chloro-3-indolyl-beta-D-galactopyranoside (X-gal) staining, suggesting 1 M sucrose in phosphate-buffered saline had best viability. Adenovirus release studies showed that greater than 30% virus remained on the material surface up to 16 h. Lyophilized adenovirus could be precisely localized in defined patterns and the transduction efficiency was also improved. To determine if the lyophilization formulations could preserve viral bioactivity, the lyophilized AdLacZ was tested after being stored at varying temperatures. Bioactivity of adenovirus lyophilized on HA was maintained for greater than 6 months when stored at -80 degrees C. In vivo studies were performed using an adenovirus encoding BMP-2 (AdBMP-2). AdBMP-2 was lyophilized in gelatin sponges and placed into rat critical-size calvarial defects for 5 weeks. Micro-computed tomography (micro-CT) analysis demonstrated that free-form delivery of AdBMP-2 had only modest effects on bone formation. In contrast, AdBMP-2 lyophilized in gelatin sponges led to more than 80% regeneration of critical-size calvarial defects.

Virus-based gene therapy strategies for bone regeneration

Gene therapy has emerged as a promising strategy for the repair and regeneration of damaged musculoskeletal tissues. Application of this paradigm to bone healing has shown enhanced efficacy in preclinical animal studies compared to conventional bone grafting approaches. This review discusses current and emerging virus-based genetic engineering strategies for the delivery of therapeutic molecules which promote skeletal regeneration. Viral gene delivery vectors are discussed in the context of bone repair in order to illustrate the challenges and applications of these methods with tissue-specific examples. Moreover the concepts discussed can be broadly applied to promote healing in a wide range of tissues. We also present important considerations involved in the application of these gene therapy techniques to a variety of osteogenic (e.g. bone marrow-derived cells) and non-osteogenic (e.g. fibroblasts and skeletal myoblasts) cell types. Criteria for the selection of regenerative molecules with soluble versus intracellular modes of action and emerging combinatorial approaches are also discussed. Overall, gene transfer technologies have the potential to overcome limitations associated with existing bone grafting approaches and may enable investigators to design therapies which more closely mimic the complex spatial and temporal cascade of proteins involved in endogenous bone development and repair.

Growth factor delivery for oral and periodontal tissue engineering

The treatment of oral and periodontal diseases and associated anomalies accounts for a significant proportion of the healthcare burden, with the manifestations of these conditions being functionally and psychologically debilitating. Growth factors are critical to the development, maturation, maintenance and repair of craniofacial tissues, as they establish an extracellular environment that is conducive to cell and tissue growth. Tissue-engineering principles aim to exploit these properties in the development of biomimetic materials that can provide an appropriate microenvironment for tissue development. These materials have been constructed into devices that can be used as vehicles for delivery of cells, growth factors and DNA. In this review, different mechanisms of drug delivery are addressed in the context of novel approaches to reconstruct and engineer oral- and tooth-supporting structures, namely the periodontium and alveolar bone.

Growth factor delivery for bone tissue repair: an update

Growth factors (GFs) are endogenous proteins capable of acting on cell-surface receptors and directing cellular activities involved in the regeneration of new bone tissue. The specific actions and long-term effects of GFs on bone-forming cells have resulted in exploration of their potential for clinical bone repair. The concerted efforts have led to the recent approval of two GFs, bone morphogenetic protein-2 and osteogenic protein-1, for clinical bone repair, and human parathryroid hormone (1-34) for augmentation of systemic bone mass. This review provides a selective summary of recent (2001-2004) attempts for GF delivery in bone tissue regeneration. First, a summary of non-human primate studies involving local regeneration and repair is provided, with special emphasis on the range of biomaterials used for GF delivery. Next, efforts to administer GFs for systemic augmentation of bone tissue are summarised. Finally, an alternative means of GF delivery, namely the delivery of genes coding for osteogenic proteins, rather than the delivery of the proteins, is summarised from rodent models. To conclude, future avenues of research considered promising to enhance the clinical application of GFs are discussed.

Cytokine therapy for craniosynostosis

The birth prevalence of craniosynostosis (premature suture fusion) is 300-500 per 1,000,000 live births. Surgical management involves the release of the synostosed suture. In many cases, however, the suturectomy site rapidly reossifies, further restricts the growing brain and alters craniofacial growth. This resynostosis requires additional surgery, which increases patient morbidity and mortality. New findings in bone biology and molecular pathways involved with suture fusion, combined with novel tissue engineering techniques, may allow the design of targeted and complementary therapies to decrease complications inherent in high-risk surgical procedures. This paper selectively reviews recent advances in i) identifying genetic mutations and the aetiopathogenesis of a number of craniosynostotic conditions; ii) cranial suture biology and molecular biochemical pathways involved in suture fusion; and iii) the design, development and application of various vehicles and tissue engineered constructs to deliver cytokines and genes to cranial sutures. Such biologically based therapies may be used as surgical adjuncts to rescue fusing sutures or help manage postoperative resynostosis.

Evolving concepts in bone tissue engineering

The field of tissue engineering integrates the latest advances in molecular biology, biochemistry, engineering, material science, and medical transplantation. Researchers in the developing field of regenerative medicine have identified bone tissue engineering as an attractive translational target. Clinical problems requiring bone regeneration are diverse, and no single regeneration approach will likely resolve all defects. Recent advances in the field of tissue engineering have included the use of sophisticated biocompatible scaffolds, new postnatal multipotent cell populations, and the appropriate cellular stimulation. In particular, synthetic polymer scaffolds allow for fast and reproducible construction, while still retaining biocompatible characteristics. These criteria relate to the immediate goal of determining the ideal implant. The search is becoming a reality with widespread availability of biocompatible scaffolds; however, the desired parameters have not been clearly defined. Currently, most research focuses on the use of bone morphogenetic proteins (BMPs), specifically BMP-2 and BMP-7. These proteins induce osteogenic differentiation in vitro, as well as bone defect healing in vivo. Protein-scaffold interactions that enhance BMP binding are of the utmost importance, since prolonged BMP release creates the most osteogenic microenvironment. Transition into clinical studies has had only mild success and relies on large doses of BMPs for bone formation. Advances within the field of bone tissue engineering will likely overcome these challenges and lead to more clinically relevant therapies.

Hybrid Constructs for Craniofacial Reconstruction: Sustained Gene Delivery Using Demineralized Bone Matrix Putty

These experiments evaluate the efficacy of a demineralized bone matrix putty engineered as a hybrid construct for sustained, site-directed gene transfer using an adenoviral vector. In vitro experiments were performed to evaluate the optimal dosing for gene transfer to fetal calvarial osteoblasts and dural cells and for the sustainability of gene transfer from the hybrid constructs. In the dosing experiments, hybrid constructs were created by combining 0.5 mL of demineralized bone matrix putty (DBX; SYNTHES Maxillofacial, Monument, CO) with 1 x 10(8), 1 x 10(7), or 1 x 10(6) particle-forming units (PFU) of an adenoviral vector carrying the gene encoding green fluorescent protein (AdGFP). These constructs were then placed in direct contact, or in transwell coculture, with fetal murine calvarial osteoblasts or dural cells at a multiplicity of infection (MOI = viral particle/cell ratio) of 1000, 100, and 10. The sustainability of gene transfer was tested through transfer of the hybrid construct to wells containing untransfected cells every 24 hours for 30 days. In both experiments, gene transfer was determined through the visualization of GFP using fluorescence light microscopy 24 hours after the onset of transfection. Optimal dosing for gene transfer occurred at an MOI of 10 for calvarial osteoblasts and 100 for dural cells. At greater concentrations, toxicity was observed in the majority of samples. Gene transfer to fetal dural cells and calvarial osteoblasts was sustained throughout the 30-day period. These experiments suggest that adenoviral vectors could be successfully incorporated within demineralized bone matrix to provide effective, sustained, site-directed gene transfer.

Ex vivo gene therapy for skeletal regeneration in cranial defects compromised by postoperative radiotherapy

Because radiation remains a common postoperative treatment for head and neck cancers, it is critical to determine whether new bone-regenerative approaches are effective for healing craniofacial defects challenged by therapeutic doses of radiation. The objective of this study was to determine whether the deleterious effects of radiotherapy could be overcome by ex vivo gene therapy to heal craniofacial defects. Rat calvarial critical-sized defects were treated with either an inlay calvarial bone graft or syngeneic dermal fibroblasts transduced ex vivo with an adenovirus engineered to express bone morphogenetic protein 7 (BMP-7), a morphogen known to stimulate bone formation. Two weeks postoperatively, either no radiation or a single 12-Gy radiation dose was delivered to the operated area and the tissue was harvested 4 weeks later. None of the inlay bone grafts healed at the wound margins of either the radiated or nonradiated sites. In contrast, bone was successfully regenerated when using an ex vivo gene therapy approach. More bone formed in the nonradiated group as determined by the percentage of defect surface covered (87 +/- 4.1 versus 65 +/- 4.7%; p = 0.003) and percentage of defect area filled by new bone (60 +/- 5.9 versus 32 +/- 2.7%; p = 0.002). Although the effects of radiation on the wound were not completely overcome by the gene therapy approach, bone regeneration was still successful despite the radiation sensitivity of the fibroblasts. These results indicate that BMP-7 ex vivo gene therapy is capable of successfully regenerating bone in rat calvarial defects even after a therapeutic dose of radiation. This approach may represent a new strategy for regenerating skeletal elements lost due to head and neck cancer.

New strategies for craniofacial repair and replacement: a brief review

Craniofacial anomalies can severely affect the appearance, function, and psychosocial well being of patients; thus, tissue engineers are developing new techniques to functionally and aesthetically rebuild craniofacial structures. In the past decade, there have been tremendous advances in the field of tissue engineering that will substantially alter how surgeons approach craniofacial reconstruction. In this brief review, we highlight some of the preclinical recombinant protein, gene transfer, and cell-based strategies currently being developed to augment endogenous tissue repair or create structures for replacement. In addition, we discuss the importance of studying endogenous models of tissue induction and present some of the current in vitro and in vivo approaches to growing complex tissues/organs for craniofacial reconstruction.

Tools and techniques for craniofacial tissue engineering

Craniofacial surgery is an important conduit for tissue-engineering applications. As interdisciplinary collaborations improve, we can expect to see remarkable progress in de novo tissue synthesis, replacement, and repair. Ultimately, we may one day find that gene-modified cell-based tissue-engineering strategies will succeed today's reconstructive strategies. In this review, we highlight the major gene- and cell-based preclinical tools and techniques that are currently being developed to solve common craniofacial problems.