Current status of ceramic coatings for dental implants

3D printed zirconia dental implants with integrated directional surface pores combine mechanical strength with favorable osteoblast response

Dental implants need to combine mechanical strength with promoted osseointegration. Currently used subtractive manufacturing techniques require a multi-step process to obtain a rough surface topography that stimulates osseointegration. Advantageously, additive manufacturing (AM) enables direct implant shaping with unique geometries and surface topographies. In this study, zirconia implants with integrated lamellar surface topography were additively manufactured by nano-particle ink-jetting. The ISO-14801 fracture load of as-sintered implants (516±39 N) resisted fatigue in 5-55°C water thermo-cycling (631±134 N). Remarkably, simultaneous mechanical fatigue and hydrothermal aging at 90°C significantly increased the implant strength to 909±280 N due to compressive stress generated at the seamless transition of the 30-40 µm thick, rough and porous surface layer to the dense implant core. This unique surface structure induced an elongated osteoblast morphology with uniform cell orientation and allowed for osteoblast proliferation, long-term attachment and matrix mineralization. In conclusion, the developed AM zirconia implants not only provided high long-term mechanical resistance thanks to the dense core along with compressive stress induced at the transition zone, but also generated a favorable osteoblast response owing to the integrated directional surface pores. STATEMENT OF SIGNIFICANCE: : Zirconia ceramics are becoming the material of choice for metal-free dental implants, however significant efforts are required to obtain a rough/porous surface for enhanced osseointegration, along with the risk of surface delamination and/or microstructure variation. In this study, we addressed the challenge by additively manufacturing implants that seamlessly combine dense core with a porous surface layer. For the first time, a unique surface with a directional lamellar pore morphology was additively obtained. This AM implant also provided strength as strong as conventionally manufactured zirconia implants before and after long-term fatigue. Favorable osteoblast response was proved by in-vitro cell investigation. This work demonstrated the opportunity to AM fabricate novel ceramic implants that can simultaneously meet the mechanical and biological functionality requirements.

Surface functionalized bioceramics coated on metallic implants for biomedical and anticorrosion performance - a review

In modern days, the usage of trauma fixation devices has significantly increased due to sports injury, age-related issues, accidents, and revision surgery purposes. Numerous materials such as stainless steel, titanium, Co-Cr alloy, polymers, and ceramics have been used to replace the missing or defective parts of the human body. After implantation, body fluids (Na⁺, K⁺, and Cl^-), protein, and blood cells interact with the surface of metallic implants, which favours the release of ions from the metallic surface to surrounding body tissues, leading to a hypersensitive reaction. Body pH, temperature, and interaction of immune cells also cause metal ion leaching and lose host cell interaction and effective mineralization for better durability. Moreover, microbial invasion is another important crisis, which produces extracellular compounds onto the biomaterial surface through which it escapes from the antimicrobial agents. To enhance the performance of materials by improving mechanical, corrosion resistance, antimicrobial, and biocompatibility properties, surface modification is a prerequisite method in which chemical vapour deposition (CVD), physical vapour deposition (PVD), sol-gel method, and electrochemical deposition are generally involved. The properties of bioceramics such as chemical inertness, bioactivity, biocompatibility, and corrosion protection make them most suitable for the surface functionalization of metallic implants. To the best of our knowledge, very limited literature is available to discuss the interaction of body proteins, pH, and temperature onto bioceramic coatings. Hence, the present review focuses on the corrosion behaviour of different ceramic composite coating materials with different conditions. This review initially briefs the properties and surface chemistry of metal implants and the need for surface modifications by different deposition techniques. Further, mechanical, cytotoxicity, antimicrobial property, and electrochemical behaviour of ceramics and metal nitride coatings are discussed. Finally, future perspectives of coatings are outlined for biomedical applications.

A systematic review on the effect of inorganic surface coatings in large animal models and meta-analysis on tricalcium phosphate and hydroxyapatite on periimplant bone formation

The aim of the present systematic review was to analyse studies using inorganic implant coatings and, in a meta‐analysis, the effect of specifically tricalcium phosphate (TCP) and hydroxyapatite (HA) implant surface coatings on bone formation according to the PRISMA criteria. Inclusion criteria were the comparison to rough surfaced titanium implants in large animal studies at different time points of healing. Forty studies met the inclusion criteria for the systematic review. Fifteen of these analyzed the bone‐to‐implant contact (BIC) around the most investigated inorganic titanium implant coatings, namely TCP and HA, and were included in the meta‐analysis. The results of the TCP group show after 14 days a BIC being 3.48% points lower compared with the reference surface. This difference in BIC decreases to 0.85% points after 21–28 days. After 42–84 days, the difference in BIC of 13.79% points is in favor of the TCP‐coatings. However, the results are not statistically significant, in part due to the fact that the variability between the studies increased over time. The results of the HA group show a significant difference in mean BIC of 6.94% points after 14 days in favor of the reference surface. After 21–28 days and 42–84 days the difference in BIC is slightly in favor of the test group with 1.53% points and 1.57% points, respectively, lacking significance. In large animals, there does not seem to be much effect of TCP‐coated or HA‐coated implants over uncoated rough titanium implants in the short term.

Systematic Review and Meta-Analysis of the Effectiveness of Calcium-Phosphate Coating on the Osseointegration of Titanium Implants

Ca-P coatings on Ti implants have demonstrated good osseointegration capability due to their similarity to bone mineral matter. Three databases (PubMed, Embase, and Web of Science) were searched electronically in February 2021 for preclinical studies in unmodified experimental animals, with at least four weeks of follow-up, measuring bone-to-implant contact (BIC). Although 107 studies were found in the initial search, only eight experimental preclinical studies were included. Adverse events were selected by two independent investigators. The risk of bias assessment of the selected studies was evaluated using the Cochrane Collaboration Tool. Finally, a meta-analysis of the results found no statistical significance between implants coated with Ca-P and implants with etched conventional surfaces (difference of means, random effects: 5.40; 99% CI: -5.85, 16.65). With the limitations of the present review, Ca-P-coated Ti surfaces have similar osseointegration performance to conventional etched surfaces. Future well-designed studies with large samples are required to confirm our findings.

Local tissue effects and peri-implant bone healing induced by implant surface treatment: an in vivo study in the sheep

OBJECTIVE

The aim of this study was to assess, through biological analysis, the local effects and osseointegration of dental implants incorporating surface micro/nanofeatures compared with implants of identical design without surface treatment.

BACKGROUND

Known to impact bone cell behavior, surface chemical and topography modifications target improved osseointegration and long-term success of dental implants. Very few studies assess the performance of implants presenting both micro- and nanofeatures in vivo on the animal models used in preclinical studies for medical device certification.

METHODS

Implant surfaces were characterized in terms of topography and surface chemical composition. After 4 weeks and 13 weeks of implantation in sheep femoral condyles, forty implants were evaluated through micro-computed tomography, histopathologic, and histomorphometric analyses.

RESULTS

No local adverse effects were observed around implants. Histomorphometric analyses showed significantly higher bone-to-implant contact in the coronal region of the surface-treated implant at week 4 and week 13, respectively, was 79.3 ± 11.2% and 86.4 ± 6.7%, compared with the untreated implants (68.3 ± 8.8% and 74.8 ± 13%). Micro-computed tomography analyses revealed that healing patterns differed between coronal and apical regions, with higher coronal bone-to-implant contact at week 13. Histopathologic results showed, at week 13, bone healing around the surface-treated implant with undistinguishable defect margins, while the untreated implant still presented bone condensation and traces of the initial drill defect.

CONCLUSION

Our results suggest that the surface-treated implant not only shows no deleterious effects on local tissues but also promotes faster bone healing around the implant.

Enhanced osteogenesis properties of titanium implant materials by highly uniform mesoporous thin films of hydroxyapatite and titania intermediate layer

Titanium (Ti) has been widely used for medical and dental applications; however, bare Ti cannot be properly connected to a living bone, and hence some modifications are needed for this purpose. The present study describes the synthesis of mesoporous hydroxyapatite thin films (MHF) on titanium implant materials for speeding up and shortening the processes of osteointegration. The uniform MHF was coated on a Ti substrate following the insertion of intermediate titania (TiO₂) film via the sol-gel dip-coating method. The intermediate titania layer improved the bonding strength between the MHF and Ti substrate. MHFs were synthesized using a precursor solution containing phosphoric acid, calcium nitrate tetrahydrate, and a nonionic surfactant (C₁₂E₁₀) as the phosphate source, calcium source, and structure-directing agent, respectively. The effect of calcination temperature on phase composition, morphology, microstructure, roughness, and wettability of the MHFs was investigated using XRD, FE-SEM, COM, AFM, and contact angle measurement. The XRD results revealed the crystalline hydroxyapatite phase, which was improved with an increase in the calcination temperature. Moreover, the FE-SEM images showed the crack-free MHFs, uniform thickness of the layer, and mesoporous surface morphology. In addition, it was found that the roughness and wettability of the samples change upon the alteration of calcination temperature. The biological studies demonstrated that MHFs support the adhesion and proliferation of the mesenchymal stem cells (MSCs) and guid them toward osteogenic differentiation. Therefore, the MHFs prepared in this study may be useful in a wide range of applications, particularly in bone regeneration medicine.

A review of nanostructured surfaces and materials for dental implants: surface coating, patterning and functionalization for improved performance

The emerging field of nanostructured implants has enormous scope in the areas of medical science and dental implants. Surface nanofeatures provide significant potential solutions to medical problems by the introduction of better biomaterials, improved implant design, and surface engineering techniques such as coating, patterning, functionalization and molecular grafting at the nanoscale. This review is of an interdisciplinary nature, addressing the history and development of dental implants and the emerging area of nanotechnology in dental implants. After a brief introduction to nanotechnology in dental implants and the main classes of dental implants, an overview of different types of nanomaterials (i.e. metals, metal oxides, ceramics, polymers and hydrides) used in dental implant together with their unique properties, the influence of elemental compositions, and surface morphologies and possible applications are presented from a chemical point of view. In the core of this review, the dental implant materials, physical and chemical fabrication techniques and the role of nanotechnology in achieving ideal dental implants have been discussed. Finally, the critical parameters in dental implant design and available data on the current dental implant surfaces that use nanotopography in clinical dentistry have been discussed.

Effects of Surface Treatment Modification and Implant Design in Implants Placed Crestal and Subcrestally Applying Delayed Loading Protocol

OBJECTIVES

The aim of this study is to evaluate the effect of the surface modification and cervical implant design on the bone remodeling in implants installed at the crestal and subcrestal bone level.

METHODS

Ten American Fox Hound of approximately 1 year of age, each weighing approximately 14 to 15 kg, were used for this study. Two different dental implant macrodesign were used: cylindric-conical with 3.5 mm of diameter and 9 in length (implant A) and conical with 2.9 mm of diameter and 9 mm in length (implant B). Two surfaces were used: sandblasting and acid etching (surface 1) and sandblasting and acid etching, then maintained in an isotonic solution of 0.9% sodium chloride (surface 2). Four groups were performed (n = 20 implants): Group A1 (implant A with the surface 1), Group A2 (implant A with surface 2), Group B1 (implant B with surface 1), and Group B2 (implant B with surface 2). The mandibular premolars and molars (P1, P2, P3, M1) were removed and, after 2 months of healing, implants were inserted at the crestal and 2 mm subcrestal position related to the buccal bone level. Analysis was performed at 4 and 8 weeks. Histomorphometry with longitudinal measurements and bone implant contact, bone remodeling and implant stability quotient analysis were realized.

RESULTS

The surface 2 showed to get more close contact between implant and new bone formed after implant placement and more stability surrounding platform both at 4 and 8 weeks. Surface 2 groups and subrestally placed showed to have better results in terms of linear measurements, with less bone loss and soft tissue distance to the IS. The data showed significant differences among the groups (P < 0.001).

CONCLUSIONS

Surface modification (surface 2) has shown to be an effective alternative to conventional surface with better results in situations placed subcrestally and combined with implant design.

Comparison of Removal Torques for Implants With Hydroxyapatite-Blasted and Sandblasted and Acid-Etched Surfaces

PURPOSE

Sandblasted and acid-etched (SLA) implants are widely known and used by many practitioners. A resorbable blasting media (RBM) surface is produced by blasting with bioceramic particles. We studied the correlation between the particle sizes of the media and the biomechanical force, evaluating the removal torque of hydroxyapatite-blasted implants.

MATERIALS AND METHODS

Commercial SLA implants comprised the control group, and RBM surface-treated implants of the same size and design comprised the experimental group. These implants were installed on both sides of rabbits' tibiae. Four weeks after the implants were installed, the implant removal torque was measured using a digital torque device. The roughness of the implant surface was analyzed using field-emission scanning electron microscopy and confocal laser scanning microscopy.

RESULTS

Both groups of surface textures exhibited a regular porosity. The 2 groups exhibited different surface roughness. No significant differences in removal torques were observed between the control and experimental groups.

CONCLUSION

There were no significant differences in our measures of osseointegration between hydroxyapatite-blasted and SLA implants.

Optimizing Connective Tissue Integration on Laser-Ablated Implant Abutments

Focused Clinical Question: The integration of connective tissue (CT) to a laser-ablated abutment with a microgrooved surface at the apical millimeter (LL) has been documented in both animal and human studies. How should the healing be influenced to optimize the CT integration on abutment surfaces? Summary: When smooth machined titanium (ST) abutments were placed, epithelial attachment was found on abutments, but no CT integration was noted. On LL abutments, a zone of epithelial attachment and CT integration was noted. When an ST abutment was switched for an LL abutment, the soft tissue was inconsistent; however, when an LL abutment was placed after the removal of a prior LL abutment, CT integration was observed. Conclusions: Consistent CT integration was observed on LL abutment surfaces after implant placement. Switching LL abutments with new LL abutments consistently led to CT integration. This was not consistent when an ST abutment was switched for an LL abutment. Plaque and gingival indices were comparable between teeth and abutments. Probing depth (PD) was lower around teeth. There was no difference in PD between abutments. CT integration on LL abutments was optimized by initial healing occurring on an LL abutment or by creation of a CT wound before insertion of the abutment.

A Critical Review of Dental Implant Materials with an Emphasis on Titanium versus Zirconia

The goal of the current publication is to provide a comprehensive literature review on the topic of dental implant materials. The following paper focuses on conventional titanium implants and more recently introduced and increasingly popular zirconia implants. Major subtopics include the material science and the clinical considerations involving both implant materials and the influence of their physical properties on the treatment outcome. Titanium remains the gold standard for the fabrication of oral implants, even though sensitivity does occur, though its clinical relevance is not yet clear. Zirconia implants may prove to be promising in the future; however, further in vitro and well-designed in vivo clinical studies are needed before such a recommendation can be made. Special considerations and technical experience are needed when dealing with zirconia implants to minimize the incidence of mechanical failure.

Nanometer-scale features on micrometer-scale surface texturing: a bone histological, gene expression, and nanomechanical study

Micro- and nanoscale surface modifications have been the focus of multiple studies in the pursuit of accelerating bone apposition or osseointegration at the implant surface. Here, we evaluated histological and nanomechanical properties, and gene expression, for a microblasted surface presenting nanometer-scale texture within a micrometer-scale texture (MB) (Ossean Surface, Intra-Lock International, Boca Raton, FL) versus a dual-acid etched surface presenting texture at the micrometer-scale only (AA), in a rodent femur model for 1, 2, 4, and 8weeks in vivo. Following animal sacrifice, samples were evaluated in terms of histomorphometry, biomechanical properties through nanoindentation, and gene expression by real-time quantitative reverse transcription polymerase chain reaction analysis. Although the histomorphometric, and gene expression analysis results were not significantly different between MB and AA at 4 and 8 weeks, significant differences were seen at 1 and 2 weeks. The expression of the genes encoding collagen type I (COL-1), and osteopontin (OPN) was significantly higher for MB than for AA at 1 week, indicating up-regulated osteoprogenitor and osteoblast differentiation. At 2 weeks, significantly up-regulated expression of the genes for COL-1, runt-related transcription factor 2 (RUNX-2), osterix, and osteocalcin (OCN) indicated progressive mineralization in newly formed bone. The nanomechanical properties tested by the nanoindentation presented significantly higher-rank hardness and elastic modulus for the MB compared to AA at all time points tested. In conclusion, the nanotopographical featured surfaces presented an overall higher host-to-implant response compared to the microtextured only surfaces. The statistical differences observed in some of the osteogenic gene expression between the two groups may shed some insight into the role of surface texture and its extent in the observed bone healing mechanisms.

Evolving marine biomimetics for regenerative dentistry

New products that help make human tissue and organ regeneration more effective are in high demand and include materials, structures and substrates that drive cell-to-tissue transformations, orchestrate anatomical assembly and tissue integration with biology. Marine organisms are exemplary bioresources that have extensive possibilities in supporting and facilitating development of human tissue substitutes. Such organisms represent a deep and diverse reserve of materials, substrates and structures that can facilitate tissue reconstruction within lab-based cultures. The reason is that they possess sophisticated structures, architectures and biomaterial designs that are still difficult to replicate using synthetic processes, so far. These products offer tantalizing pre-made options that are versatile, adaptable and have many functions for current tissue engineers seeking fresh solutions to the deficiencies in existing dental biomaterials, which lack the intrinsic elements of biofunctioning, structural and mechanical design to regenerate anatomically correct dental tissues both in the culture dish and in vivo.

The in vivo effect of P-15 coating on early osseointegration

The aim of this study was to evaluate mechanically and morphologically the effect of a specific peptide sequence P-15, when incorporated into implant surfaces. Three types of implants were used for the study: Group A: commercially pure titanium implant (blasted and acid etched) + electrochemical thin calcium phosphate deposition, Group B: commercially pure titanium implant (blasted and acid etched) + electrochemical thin calcium phosphate deposition + P-15 incorporation, and as control, Group C: commercially pure titanium implant (blasted and acid etched). After a topographical characterization, transcortical osteotomies were made, and all implant groups (102 implants per group) were randomly placed bilaterally in the tibiae of adult beagle dogs (n = 24). At, 1, 2, and 4 weeks post-surgery, the animals were sacrificed and the samples were retrieved for removal torque tests, for nano indentation, and for histomorphometrical analysis. The results (mean ± 95% CI) showed that Group B (34.4 ± 8.7%) presented statistically higher bone-to-implant contact than the other groups (A = 23.9 ± 7.8%; C = 21.7 ± 8.3%) at 1 week, indicating an enhanced osteogenesis due to the peptide incorporation. The results suggested that the incorporation of P-15 to implant surfaces increased its bioactivity and the effects were notable especially in the early stages of the healing process.

Histologic and Biomechanical Evaluation of 2 Resorbable-Blasting Media Implant Surfaces at Early Implantation Times

This study evaluated 3 implant surfaces in a dog model: (1) resorbable-blasting media + acid-etched (RBMa), alumina-blasting + acid-etching (AB/AE), and AB/AE + RBMa (hybrid). All of the surfaces were minimally rough, and Ca and P were present for the RBMa and hybrid surfaces. Following 2 weeks in vivo, no significant differences were observed for torque, bone-to-implant contact, and bone-area fraction occupied measurements. Newly formed woven bone was observed in proximity with all surfaces.

Antimicrobial surfaces for craniofacial implants: state of the art

In an attempt to regain function and aesthetics in the craniofacial region, different biomaterials, including titanium, hydroxyapatite, biodegradable polymers and composites, have been widely used as a result of the loss of craniofacial bone. Although these materials presented favorable success rates, osseointegration and antibacterial properties are often hard to achieve. Although bone-implant interactions are highly dependent on the implant's surface characteristics, infections following traumatic craniofacial injuries are common. As such, poor osseointegration and infections are two of the many causes of implant failure. Further, as increasingly complex dental repairs are attempted, the likelihood of infection in these implants has also been on the rise. For these reasons, the treatment of craniofacial bone defects and dental repairs for long-term success remains a challenge. Various approaches to reduce the rate of infection and improve osseointegration have been investigated. Furthermore, recent and planned tissue engineering developments are aimed at improving the implants' physical and biological properties by improving their surfaces in order to develop craniofacial bone substitutes that will restore, maintain and improve tissue function. In this review, the commonly used biomaterials for craniofacial bone restoration and dental repair, as well as surface modification techniques, antibacterial surfaces and coatings are discussed.

Implants in bone: part I. A current overview about tissue response, surface modifications and future perspectives

PURPOSE

The aim of study paper is to present an overview of osseointegration of dental implants, focusing on tissue response, surface modifications and future perspective.

DISCUSSION

Great progress has been made over the decades in the understanding of osseous peri-implant healing of dental implants, leading to the development of new implant materials and surfaces. However, failures and losses of implants are an indicator that there is room for improvement. Of particular importance is the understanding of the biological interaction between the implant and its surrounding bone.

CONCLUSION

The survival rates of dental implants in bone of over 90 % after 10 years show that they are an effective and well-established therapy option. However, new implant materials and surface modifications may be able to improve osseointegration of medical implants especially when the wound healing is compromised. Advanced techniques of evaluation are necessary to understand and validate osseointegration in these cases. An overview regarding the current state of the art in experimental evaluation of osseointegration of implants and implant material modifications will be given in Part II.

Physicochemical Characterization and In Vivo Evaluation of Amorphous and Partially Crystalline Calcium Phosphate Coatings Fabricated on Ti-6Al-4V Implants by the Plasma Spray Method

Objective. To characterize the topographic and chemical properties of 2 bioceramic coated plateau root form implant surfaces and evaluate their histomorphometric differences at 6 and 12 weeks in vivo. Methods. Plasma sprayed hydroxyapatite (PSHA) and amorphous calcium phosphate (ACP) surfaces were characterized by scanning electron microscopy (SEM), interferometry (IFM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). Implants were placed in the radius epiphysis, and the right limb of dogs provided implants that remained for 6 weeks, and the left limb provided implants that remained 12 weeks in vivo. Thin sections were prepared for bone-to-implant contact (BIC) and bone-area-fraction occupancy (BAFO) measurements (evaluated by Friedman analysis P < 0.05). Results. Significantly, higher S_a (P < 0.03) and S_q (P < 0.02) were observed for ACP relative to PSHA. Chemical analysis revealed significantly higher HA, calcium phosphate, and calcium pyrophosphate for the PSHA surface. BIC and BAFO measurements showed no differences between surfaces. Lamellar bone formation in close contact with implant surfaces and within the healing chambers was observed for both groups. Conclusion. Given topographical and chemical differences between PSHA and ACP surfaces, bone morphology and histomorphometric evaluated parameters showed that both surfaces were osseoconductive in plateau root form implants.

Nanodiagnostics in Microbiology and Dentistry

This chapter presents a general overview of nanodiagnostics in microbiology and dentistry. Nanodiagnostics uses biosensor technology which is one of the most promising, compact systems consisting of a composite analysis of biological recognition element. Detecting an analyte (glucose, antibiotics, etc.) using a transducer element or detector element to quantify the amount of analyte is the working principle of biosensors. The transducer or the detector element transforms the signal resulting from the interaction of the analyte with the biological element into another signal that can be more easily measured and quantified. Nanobiotechnology scientists have also successfully produced microchips that are coated with biological molecules. The chip is designed to emit an electrical impulse signal when the molecules detect signs of a disease. Special sensor nanobots can be inserted into the blood under the skin where they can check blood contents and warn of any possible diseases. They can also be used to monitor the sugar level in the blood. Advantages of using such nanobots are that they are very cheap to produce and are easily portable.

The effect of alterations on resorbable blasting media processed implant surfaces on early bone healing: a study in rabbits

OBJECTIVES

Etching resorbable blasting media (RM) processed implants is a common engineering procedure, but the interplay between the resulting physicochemical properties and its effects on early bone healing have not been thoroughly addressed.

METHODS

Screw-root form implant surfaces were treated with 1 of 3 methods: grit (alumina) blasted/acid etching, RM, and RM + acid etching (RMAA). Surface topography (n = 3 each) was characterized by scanning electron microscopy and atomic force microscopy and chemical characterization by x-ray photoelectron spectroscopy analysis. The implants were placed at the distal femur of 16 rabbits, where 3 implants, 1 from each surface, were placed bilaterally remaining 4 and 8 weeks in vivo. After euthanization, one half of the specimens were torqued to interface failure at a rate of ∼0.196 radians/min and the other half were nondecalcified processed for histomorphology and bone-to-implant contact evaluation.

RESULTS

Physicochemical characterization showed that the grit (alumina) blasted/acid-etched surface was rougher than RM and RMAA. Higher levels of calcium and phosphorous were observed for the RM surface compared with the RMAA surface. No significant differences were observed in torque and bone-to-implant contact between surfaces at 4 or 8 weeks. Histomorphologic evaluation showed woven bone formation around all surfaces at 4 weeks, and its initial replacement by lamellar bone at 8 weeks.

CONCLUSIONS

Despite differences in texture/chemistry, all implant surfaces were biocompatible and osseoconductive, and led to comparable in vivo bone fixation and measurable histomorphometric parameters.

Nonfusion stabilization of the degenerative lumbar spine

Object

The goal of this study was to assess whether a stable but nonrigid nonfusion implant can stabilize the spine in degenerative diseases and also prevent instability following decompression. Instrumented spondylodesis is a recognized surgical treatment in degenerative disease of the lumbar spine. However, pain can develop at the bone graft donor site and the operative trauma can be very stressful in elderly patients, and it is suspected that there may be increased degenerative changes in the adjacent segments. In 2002, a nonrigid but rotationally stable pedicle screw and rod system was introduced, which could be used without additional fusion (referred to hereafter as the Cosmic system).

Methods

A total of 139 patients with degenerative disease of the lumbar spine underwent spinal stabilization with the Cosmic system without additional spondylodesis. Seventy patients had an additional decompression. The minimum follow-up was 2 years. The perioperative course, the clinical results, and the erect anteroposterior and lateral radiographs were recorded and compared with the preoperative data. The data were obtained from 6 different spine centers in Europe and documented on an Internet platform.

Results

The Oswestry Disability Index score improved from 48.9% to 22.5%, and the visual analog scale score decreased from 7.3 to 2.5. Lumbar lordosis did not change, nor did the adjacent disc height. Eleven patients underwent revision, 4 of them for implant failure. Of the 139 patients, 110 assessed the result as excellent, very good, or good; 24 as fair; and 5 as poor. A total of 122 patients would undergo surgery again. There were no significant differences between patients with or without an additional decompression.

Conclusions

The Cosmic system is a stable but nonrigid posterior nonfusion system. Implant complications are low and the clinical outcome is good. Longer follow-up is necessary to confirm the 2-year results.

Biomechanical and histologic evaluation of non-washed resorbable blasting media and alumina-blasted/acid-etched surfaces

OBJECTIVES

To compare the biomechanical fixation and histomorphometric parameters between two implant surfaces: non-washed resorbable blasting media (NWRBM) and alumina-blasted/acid-etched (AB/AE), in a dog model.

MATERIAL AND METHODS

The surface topography was assessed by scanning electron microscopy, optical interferometry and chemistry by X-ray photoelectron spectroscopy (XPS). Six beagle dogs of ∼1.5 years of age were utilized and each animal received one implant of each surface per limb (distal radii sites). After a healing period of 3 weeks, the animals were euthanized and half of the implants were biomechanically tested (removal torque) and the other half was referred to nondecalcified histology processing. Histomorphometric analysis considered bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO). Following data normality check with the Kolmogorov-Smirnov test, statistical analysis was performed by paired t-tests at 95% level of significance.

RESULTS

Surface roughness parameters S(a) (average surface roughness) and S(q) (mean root square of the surface) were significantly lower for the NWRBM compared with AB/AE. The XPS spectra revealed the presence of Ca and P in the NWRBM. While no significant differences were observed for both BIC and BAFO parameters (P>0.35 and P>0.11, respectively), a significantly higher level of torque was observed for the NWRBM group (P=0.01). Bone morphology was similar between groups, which presented newly formed woven bone in proximity with the implant surfaces.

CONCLUSION

A significant increase in early biomechanical fixation was observed for implants presenting the NWRBM surface.

Histologic and biomechanical evaluation of alumina-blasted/acid-etched and resorbable blasting media surfaces

This study evaluated the early biomechanical fixation and bone-to-implant contact (BIC) of an alumina-blasted/acid-etched (AB/AE) compared with an experimental resorbable blasting media (RBM) surface in a canine model. Higher texturization was observed for the RBM than for the AB/AE surface, and the presence of calcium and phosphorus was only observed for the RBM surface. Time in vivo and implant surface did not influence torque. For both surfaces, BIC significantly increased from 2 to 4 weeks.

The effect of a nanothickness coating on rough titanium substrate in the osteogenic properties of human bone cells

This study evaluated the effect of a bioactive ceramic coating, in the nanothickness range, onto a moderately rough surface on the osteogenic behavior of human bone cells. The cells were harvested from the mandibular mental region and were cultured over Ti-6Al-4V disks of different surfaces: as-machined (M), alumina-blasted/acid etched (AB/AE), and alumina-blasted/acid-etched + 300-500 nm thickness amorphous Ca- and P-based coating obtained by ion beam-assisted deposition (Nano). The culture was then evaluated regarding cell viability, adhesion, morphology, immunolocalization of osteopontin (OPN) and alkaline phosphatase (ALP). The results showed that the surface treatment did not interfere with cell viability. At 1 day, AB/AE and Nano showed higher adhesion than the M surface (p < 0.001). Higher adhesion was observed for the M than the Nano surface at 7 days (p < 0.005). The percentage of cells showing intracellular labeling for OPN at day 1 was significantly higher for the Nano compared to M surface (p < 0.03). The percentage of ALP intracellular labeling at 7 days was significantly higher for the AB/AE compared to the M surface (p < 0.0065); no differences were detected at 14 days. Our results suggest that the presence of a thin bioactive ceramic coating on a rough substrate did not favor the events related to in vitro osteogenesis. (c) 2010 Wiley Periodicals, Inc. J Biomed Mater Res, 2010.

Pedicle screw-based dynamic stabilization of the thoracolumbar spine with the Cosmic-system: a prospective observation

OBJECT

The objective of the study was to generate prospective data to assess the clinical results after dynamic stabilization with the Cosmic system (Ulrich Medical).

PATIENTS AND METHODS

Between April 2006 and December 2007, 103 consecutive patients were treated with Cosmic for painful degenerative segmental instability +/- spinal stenosis. The preoperative workup included radiological (MRI and myelography/CT) and clinical parameters (general/neurological examination, visual analogue scale (VAS), Oswestry disability index (ODI), SF-36, Karnofsky (KPS)). At pre-defined intervals (at discharge, 6 weeks, 3 months, 6 months, 12 months, and yearly) the patients were reevaluated (X-ray/flexion/extension, neurological status, VAS, ODI, SF-36, KPS, and patient satisfaction). Data were collected in a prospective observational design.

RESULTS

Data collection was completed in 100 of 103 operated patients (mean follow-up, 15 +/- 0.6 months). Dynamic stabilization was performed as first-tier surgery in 43 cases and as second-tier therapy in 60 cases. Additional decompression was performed in 83 cases. Dynamic stabilization led to significant reduction of back pain-related disability (ODI pre-op, 51 +/- 1%; post-op, 21 +/- 1%) and improvement of pain (VAS pre-op, 65 +/- 1; post-op, 21 +/- 2), mental/physical health (norm-based SF-36: mental pre-op, 44; post-op, 48; physical pre-op, 41; post-op, 46), and mobility (KPS pre-op, 70 +/- 1; post-op, 82 +/- 31). Early reoperation was necessary in 12 patients (n = 3 symptomatic misplaced screws, n = 8 CSF pseudocele, rebleeding, or impaired wound healing, n = 1 misjudged instability/stenosis in adjacent segment). Reoperations within the follow-up period were necessary in another 10 patients due to secondary screw loosening (n = 2), persistent stenosis/disk protrusion in an instrumented segment (n = 3), symptomatic degeneration of an adjacent segment (n = 6), or osteoporotic fracture of an adjacent vertebra (n = 1), respectively. Patient satisfaction rate was 91%.

CONCLUSIONS

Dynamic stabilization with Cosmic achieved significant improvement of pain, related disability, mental/physical health, and mobility, respectively, and a high rate of satisfied patients. A reoperation rate of 10% during follow-up seems relatively high at first glance. Comparable data, however, are scarce, and a prospective randomized trial (spondylodesis vs. dynamic stabilization) is warranted based on these results.

Nanotechnology in Dental Sciences: Moving towards a Finer Way of Doing Dentistry

Nanotechnologies are predicted to revolutionize: (a) the control over materials properties at ultrafine scales; and (b) the sensitivity of tools and devices applied in various scientific and technological fields. In this short review, we argue that dentistry will be no exception to this trend. Here, we present a dynamic view of dental tissues, an adoption of which may lead to finer, more effective and minimally invasive reparation approaches. By doing so, we aim at providing insights into some of the breakthroughs relevant to understanding the genesis of dental tissues at the nanostructural level or generating dental materials with nanoscale critical boundaries. The lineage of the progress of dental science, including the projected path along the presumed nanotechnological direction of research and clinical application is mentioned too. We conclude by claiming that dentistry should follow the trend of probing matter at nanoscale that currently dominates both materials and biological sciences in order to improve on the research strategies and clinical techniques that have traditionally rested on mechanistic assumptions.

In vitro cellular response and in vivo primary osteointegration of electrochemically modified titanium

Anodic spark deposition (ASD) is an attractive technique for improving the implant-bone interface that can be applied to titanium and titanium alloys. This technique produces a surface with microporous morphology and an oxide layer enriched with calcium and phosphorus. The aim of the present study was to investigate the biological response in vitro using primary human osteoblasts as a cellular model and the osteogenic primary response in vivo within a short experimental time frame (2 and 4 weeks) in an animal model (rabbit). Responses were assessed by comparing the new electrochemical biomimetic treatments to an acid-etching treatment as control. The in vitro biological response was characterized by cell morphology, adhesion, proliferation activity and cell metabolic activity. A complete assessment of osteogenic activity in vivo was achieved by estimating static and dynamic histomorphometric parameters at several time points within the considered time frame. The in vitro study showed enhanced osteoblast adhesion and higher metabolic activity for the ASD-treated surfaces during the first days after seeding compared to the control titanium. For the ASD surfaces, the histomorphometry indicated a higher mineral apposition rate within 2 weeks and a more extended bone activation within the first week after surgery, leading to more extensive bone-implant contact after 2 weeks. In conclusion, the ASD surface treatments enhanced the biological response in vitro, promoting an early osteoblast adhesion, and the osteointegrative properties in vivo, accelerating the primary osteogenic response.

Structural, microstructural, and residual stress investigations of plasma-sprayed hydroxyapatite on Ti-6Al-4 V

Plasma-spray (PS) is a classical technique usually employed to cover orthopaedic titanium implant surfaces with hydroxyapatite (HA - Ca(10)(PO(4))(6)(OH)(2)). The objective of the current study is to investigate the structure and microstructure of HA plasma-spray 50 mum thick coating on titanium alloy (Ti-6Al-4 V) and residual stress due to processing in the substrate and in HA coating. The structure of the coatings was determined by high-energy synchrotron X-ray diffraction in energy dispersive (HESXRD), selected area electron diffraction (saed), Scanning Electron Microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). No impurity phases in the HA were identified by HESXRD to keep away from the decomposition of HA at high temperature. hcp phase of HA substrate was detected with slight amorphous background. FTIR spectrum of a HA powder shows a typical spectrum for HA material with the characteristic phosphate peaks for HA at wavenumbers of 1090, 1052, 963, 602, and 573 cm(-1) are present. The morphology of HA powder observed by SEM exhibits grains of ca. 0.1 mum well-adapted for cell proliferation. HA/Ti-6Al-4 V interface observed by cross-section scanning and transmission electron microscopy (TEM) presents microcracks. Residual stresses were analyzed by sin(2) Psi X-ray diffraction method on titanium substrates and HA coating. Although the Ti substrates are in a slightly tensile residual state, the coated ones show a compressive state.

Effects of implant surface coatings and composition on bone integration: a systematic review

OBJECTIVE

The aim of the present review was to evaluate the bone integration efficacy of recently developed and marketed oral implants as well as experimental surface alterations.

MATERIALS AND METHODS

A PubMed search was performed for animal studies, human reports and studies presenting bone-to-implant contact percentage or data regarding mechanical testing.

RESULTS

For recently developed and marketed oral implants, 29 publications and for experimental surface alterations 51 publications fulfilled the inclusion criteria for this review.

CONCLUSIONS

As demonstrated in the available literature dealing with recently developed and marketed oral implants, surface-roughening procedures also affect the surface chemical composition of oral implants. There is sufficient proof that surface roughening induces a safe and predictable implant-to-bone response, but it is not clear whether this effect is due to the surface roughness or to the related change in the surface composition. The review of the experimental surface alterations revealed that thin calcium phosphate (CaP) coating technology can solve the problems associated with thick CaP coatings, while they still improve implant bone integration compared with non-coated titanium implants. Nevertheless, there is a lack of human studies in which the success rate of thin CaP-coated oral implants is compared with just roughened oral implants. No unequivocal evidence is available that suggests a positive effect on the implant bone integration of peptide sequences or growth factors coated on titanium oral implants. In contrast, the available literature suggests that bone morphogenetic protein-2 coatings might even impede the magnitude of implant-to-bone response.

Physico/chemical characterization and in vivo evaluation of nanothickness bioceramic depositions on alumina-blasted/acid-etched Ti-6Al-4V implant surfaces

The objective of this study was to physico/chemically characterize and evaluate the in vivo performance of two nanothickness ion beam assisted depositions (IBAD) of bioceramic coatings on implants in a beagle model. Alumina-blasted/acid-etched (AB/AE) Ti-6Al-4V implants were subjected to two different IBAD depositions (IBAD I and IBAD II), which were physico/chemically characterized by SEM, EDS, XPS, XPS + ion-beam milling (depth profiling), XRD, AFM, and ToF-SIMS. A beagle dog tibia model was utilized for histomorphometric and biomechanical (torque) comparison between AB/AE, IBAD I, IBAD II, and plasma-sprayed hydroxyapatite (PSHA) coated implants that remained in vivo for 3 and 5 weeks. The coatings were characterized as amorphous Ca-P with high Ca/P stoichiometries with thicknesses of an order of magnitude difference (IBAD I = 30-50 nm and IBAD II = 300-500 nm). The histomorphometric and biomechanical testing results showed that the 300-500 nm thickness deposition (IBAD II) and PSHA positively modulated bone healing at early implantation times.

Bone cell responses of titanium blasted with bioactive glass particles

Surface modification of Ti-based metals is an important issue in improving the bone cell responses and bone-implant integration. Blasting Ti with granules (mostly alumina) is commonly used to prepare a clean surface and provide a level of roughness. In this study, glass granules with a bioactive composition were used as the blasting source to improve the surface bioactivity and biocompatibility of a Ti substrate. Bioactive glass particles with a composition of 70SiO(2) * 25CaO * 5P(2)O(5) were prepared using a sol-gel method. A Ti disc was blasted with glass particles using a dental blasting unit (BG-Ti). A Ti disc blasted with commercial spherical-shaped glass (G-Ti) and a disc without blasting (Ti) were also prepared for comparison. The blasted Ti contained a large number of glass particles after the blasting process. The surface roughness of the samples in ascending order was G-Ti>BG-Ti>Ti. Murine-derived preosteoblasts (MC3T3-E1) were seeded on the samples, and the cell growth, differentiation, and mineralization behaviors were observed. The osteoblastic cells attached well and spread actively over all the sample groups with extensive cytoskeletal processes. The level of cell growth on the BG-Ti showed a continual increase with culturing up to 7 days, showing good cell viability. However, there was no significant difference (ANOVA, p<0.05) with respect to the G-Ti and Ti groups. In particular, the alkaline phosphatase (AP) activity of the cells was significantly higher on the BG-Ti than on the other groups after culturing for 14 days. Moreover, the mineralization behavior of the cells, as assessed by Alizarin S Red, was superior on the BG-Ti to that observed on the other groups after culturing for 14 and 28 days. Overall, the blasting of Ti with a bioactive glass composition is considered beneficial for producing substrates with enhanced osteogenic potential.

Basic research methods and current trends of dental implant surfaces

Among dental implant design alterations, surface modifications have been by far the most investigated topic. Regarding implant surface research, the lack of hierarchical approaches relating in vitro, in vivo, clinical trials, and ex vivo analyses has hindered biomaterials scientists with clear informed rationale guidelines for implant surface design. This manuscript provides a critical hierarchical overview of the in vitro, laboratory in vivo, clinical, and ex vivo methodologies used to investigate the performance of novel biomaterials aiming to allow dental professionals to better evaluate the past, present, and future dental implant surface research. This manuscript also contains an overview of the commercially available surface texture and chemistry modifications including novel nanotechnology-based fabrication processes. Over the last decade, surface texturing has been the most utilized parameter for increasing the host-to-implant response. Recently, dental implant surfaces utilizing reduced length scale physico/chemical features (atomic and nanometric) have shown the potential to synergistically use both texture and the inclusion of bioactive ceramic components on the surface. Although surface modifications have been shown to enhance osseointegration at early implantation times, information concerning its long-term benefit to peri-implant tissues is lacking due to the reduced number of controlled clinical trials. Given the various implants/surfaces under study, the clinician should ask, founded on the basic hierarchical approach described for the in vitro, laboratory in vivo data, as well as the results of clinical studies to effectiveness before use of any dental implant.

Corrosion resistance evaluation of a Ca- and P-based bioceramic thin coating in Ti-6Al-4V

The objective of this study was to physico/chemically characterize and determine the corrosion resistance of a Calcium-Phosphate (Ca-P) based bioceramic thin coating processed by a sputtering process on titanium alloy (Ti-6Al-4V). The samples utilized in this study were uncoated and coated disks of 10 mm diameter by 3 mm thickness. The coating was characterized by SEM, XPS + ion beam milling (IBM), thin-film mode XRD, and atomic force microscope (AFM) (n = 3). Coated and uncoated Ti-6Al-4V disk surfaces were tested in Phosphate Buffered Saline (PBS) at 25 degrees C through an area of 0.79 cm(2). A three-electrode cell set-up was used with a saturated calomel electrode (SCE) and a platinum wire as reference and counter electrodes. After 3, 17, and 25 days of immersion, electrochemical impedance spectroscopy (EIS) experiments were performed (n = 3). The EIS tests were carried out in potentiostatic mode at the open circuit potential (OCP). The frequency range considered was from 100 kHz to 10 mHz, using 10 mV root mean square as the amplitude of the perturbation signal. A potentiodynamic polarization scan using a frequency response analyzer potentiostat, was acquired following 3 days of immersion in PBS. The potentiodynamic polarization scans (n = 3) were carried out with a scan rate of 1 mV/s ranging from -0.8V(SCE) to 3.0V(SCE).

RESULTS

The physico/chemical characterization showed an amorphous Ca- and P-based coating of approximately 400-700 nm thickness with Ca-P nanometer size particles embedded in a Ca-P matrix. The Bode phase angle diagrams showed highly capacitive results at low and medium frequencies for both surfaces tested. The polarization curves showed low current densities at the corrosion potential (E (corr)), in the order of 10(-8)A/cm(2), typical of passive materials with protective surface films. Coated sample current densities were comparable to the uncoated samples.

CONCLUSION

Coated and uncoated samples were stable in the test solution with a protective film maintained throughout the 25 day immersion test period.