Rapid identification of pathogens using molecular techniques

Rapid Nucleic Acid Extraction for Aquatic Animal DNA Virus Determination Using Chelex 100 Resin via Conventional PCR and Digital Droplet PCR Detection

Simple Summary

Convenient, fast, and high-quality nucleic acid extraction methods are urgently needed in molecular diagnostic testing for viral pathogens in aquaculture. We developed a viral DNA extraction method from diseased tissues and cells using the Chelex 100 resin solution workflow. The only extraction reagents required are the Chelex 100 resin and phosphate-buffered saline. The whole extraction process only takes about 15 min from the tissue homogenate to obtain the DNA. The concentration of extracted DNA is at least 100 ng/µL. This methodology has clear benefits in terms of cost and time saving compared to the commercial kit extraction for aquatic animal DNA virus determination by PCR in the laboratory. In addition, the simplified method using Chelex 100 resin with a pH value of 10–11 presented excellent results in PCR application and could be a standard for the DNA extraction for DNA virus testing in the future.

Abstract

Molecular diagnostic testing for viral pathogens is crucial in aquaculture. The efficient and convenient preparation of pathogenic microbial nucleic acids is the basis of molecular diagnosis. Here, we developed a simplified deoxyribonucleic acid (DNA) extraction method from aquatic animal DNA viruses using the Chelex 100 resin. The nucleic acid was extracted from infected tissues and cell culture for the detection of three common aquatic viral pathogens (CEV, CyHV-2, and GSIV). We compared the extraction effects of a current commercial kit extraction method and the Chelex 100 resin extraction method according to nucleic acid concentration, conventional polymerase chain reaction (PCR), and digital droplet PCR (ddPCR). The results indicated that both extraction procedures could obtain high-quality nucleotide samples. Extracting DNA using the Chelex 100 resin led to better detective efficiency for ddPCR molecular diagnostic testing. The whole process took less than 20 min, and only Chelex 100 resin solution was added to the tissues or cells without multiple tubes being transferred several times. The extracted DNA concentration and the detection sensitivity were high. These results indicated that the Chelex 100 resin solution has the advantages of speed, efficiency, and economy compared to the commercial kit. In addition, the higher pH value (10–11) of the Chelex 100 resin solution markedly improved the detection sensitivity compared to a lower pH value (9–10). In conclusion, the comparison of the Chelex 100 Resin and commercial viral DNA extraction kits revealed the good performance of the Chelex 100 resin solution at pH 10–11 in DNA extraction for PCR amplification from aquatic animal viral samples of tissues and cells in molecular diagnostic testing. It is both rapid and cost-effective.

Host-Pathogen Adhesion as the Basis of Innovative Diagnostics for Emerging Pathogens

Infectious diseases are an existential health threat, potentiated by emerging and re-emerging viruses and increasing bacterial antibiotic resistance. Targeted treatment of infectious diseases requires precision diagnostics, especially in cases where broad-range therapeutics such as antibiotics fail. There is thus an increasing need for new approaches to develop sensitive and specific in vitro diagnostic (IVD) tests. Basic science and translational research are needed to identify key microbial molecules as diagnostic targets, to identify relevant host counterparts, and to use this knowledge in developing or improving IVD. In this regard, an overlooked feature is the capacity of pathogens to adhere specifically to host cells and tissues. The molecular entities relevant for pathogen–surface interaction are the so-called adhesins. Adhesins vary from protein compounds to (poly-)saccharides or lipid structures that interact with eukaryotic host cell matrix molecules and receptors. Such interactions co-define the specificity and sensitivity of a diagnostic test. Currently, adhesin-receptor binding is typically used in the pre-analytical phase of IVD tests, focusing on pathogen enrichment. Further exploration of adhesin–ligand interaction, supported by present high-throughput “omics” technologies, might stimulate a new generation of broadly applicable pathogen detection and characterization tools. This review describes recent results of novel structure-defining technologies allowing for detailed molecular analysis of adhesins, their receptors and complexes. Since the host ligands evolve slowly, the corresponding adhesin interaction is under selective pressure to maintain a constant receptor binding domain. IVD should exploit such conserved binding sites and, in particular, use the human ligand to enrich the pathogen. We provide an inventory of methods based on adhesion factors and pathogen attachment mechanisms, which can also be of relevance to currently emerging pathogens, including SARS-CoV-2, the causative agent of COVID-19.

Improved molecular laboratory productivity by consolidation of testing on the new random-access analyzer Alinity m

Objectives

Automated molecular analyzers have accelerated diagnosis, allowing earlier intervention and better patient follow-up. A recently developed completely automated molecular analyzer, Alinity™ m (Abbott), offers consolidated, continuous, and random-access testing that may improve molecular laboratory workflow.

Methods

An international, multicenter study compared laboratory workflow metrics across various routine analyzers and Alinity m utilizing assays for human immunodeficiency virus type 1 (HIV-1), hepatitis C virus (HCV), hepatitis B virus (HBV), high-risk human papillomavirus (HR HPV), and sexually transmitted infection (STI) (Chlamydia trachomatis [CT]/Neisseria gonorrhoeae [NG]/Trichomonas vaginalis [TV]/Mycoplasma genitalium [MG]). Three turnaround times (TATs) were assessed: total TAT (sample arrival to result), sample onboard TAT (sample loading and test starting to result), and processing TAT (sample aspiration to result).

Results

Total TAT was reduced from days with routine analyzers to hours with Alinity m, independent of requested assays. Sample onboard TATs for standard workflow using routine analyzers ranged from 7 to 32.5 h compared to 2.75–6 h for Alinity m. The mean sample onboard TAT for STAT samples on Alinity m was 2.36 h (±0.19 h). Processing TATs for Alinity m were independent of the combination of assays, with 100% of results reported within 117 min.

Conclusions

The consolidated, continuous, random-access workflow of Alinity m reduces TATs across various assays and is expected to improve both laboratory operational efficiency and patient care.

Preliminary Evidence of a Molecular Detection Method to Analyze Bacterial DNA as a Quality Indicator in Cosmetics

Cosmetics are a category of widely consumed and distributed products, and their manufacture is always subject to specific guidelines. Quality Control (QC) tests provide information supporting the absence of injurious organisms and regarding the microbiological stability of cosmetics. The microbiological risk analysis is typically performed using the plate count method, which is a time-consuming and operator-dependent approach. Molecular technologies allow a deeper and more sensitive testing than traditional cultures. The demand for rapid and sensitive methods is recently increasing. The aim of our study was to compare different DNA extraction methods in order to detect and quantify bacterial load in cosmetics using a qPCR system. Known numbers of microorganisms were spiked into six different cosmetics to simulate contaminated samples. DNA was extracted with seven extraction kits and then quantified by real-time qPCR. Results revealed differences in terms of cell recovery, DNA yield, and quality. The bead-beating approaches were the most suitable in our molecular workflow and lead to good quality DNA for analysis by qPCR within four hours. Combined with mechanical extraction, qPCR may represent an efficient and easy method for microorganism identification in cosmetics, and can be automated. This approach also is also applicable for the detection of probiotics used as beneficial biological components in cosmetic products. The results of our molecular method provided preliminary evidences for the rapid identification of cells (10–100) and nucleic acids in complex preparations employed for human health, in compliance with regulatory limits. The suggested methodology is easy, fast, and sensitive. Its scalability allows serial microbiological evaluation at every manufacturing step.

Food Forensics: Using Mass Spectrometry To Detect Foodborne Protein Contaminants, as Exemplified by Shiga Toxin Variants and Prion Strains

Food forensicists need a variety of tools to detect the many possible food contaminants. As a result of its analytical flexibility, mass spectrometry is one of those tools. Use of the multiple reaction monitoring (MRM) method expands its use to quantitation as well as detection of infectious proteins (prions) and protein toxins, such as Shiga toxins. The sample processing steps inactivate prions and Shiga toxins; the proteins are digested with proteases to yield peptides suitable for MRM-based analysis. Prions are detected by their distinct physicochemical properties and differential covalent modification. Shiga toxin analysis is based on detecting peptides derived from the five identical binding B subunits comprising the toxin. ¹⁵N-labeled internal standards are prepared from cloned proteins. These examples illustrate the power of MRM, in that the same instrument can be used to safely detect and quantitate protein toxins, prions, and small molecules that might contaminate our food.

Comparison among the Quantification of Bacterial Pathogens by qPCR, dPCR, and Cultural Methods

The demand for rapid methods for the quantification of pathogens is increasing. Among these methods, those based on nucleic acids amplification (quantitative PCRs) are the most widespread worldwide. Together with the qPCR, a new approach named digital PCR (dPCR), has rapidly gained importance. The aim of our study was to compare the results obtained using two different dPCR systems and one qPCR in the quantification of three different bacterial pathogens: Listeria monocytogenes, Francisella tularensis, and Mycobacterium avium subsp. paratuberculosis. For this purpose, three pre-existing qPCRs were used, while the same primers and probes, as well as PCR conditions, were transferred to two different dPCR systems: the QX200 (Bio-Rad) and the Quant Studio 3D (Applied Biosystems). The limits of detection and limits of quantification for all pathogens, and all PCR approaches applied, were determined using genomic pure DNAs. The quantification of unknown decimal suspensions of the three bacteria obtained by the three different PCR approaches was compared through the Linear Regression and Bland and Altman analyses. Our results suggest that, both dPCRs are able to quantify the same amount of bacteria, while the comparison among dPCRs and qPCRs, showed both over and under-estimation of the bacteria present in the unknown suspensions. Our results showed qPCR over-estimated the amount of M. avium subsp. paratuberculosis and F. tularensis cells. On the contrary, qPCR, compared to QX200 dPCR, under-estimated the amount of L. monocytogenes cells. However, the maximum difference among PCRs approaches was <0.5 Log₁₀, while cultural methods underestimated the number of bacteria by one to two Log₁₀ for Francisella tularensis and Mycobacterium avium subsp. paratuberculosis. On the other hand, cultural and PCRs methods quantified the same amount of bacteria for L. monocytogenes, suggesting for this last pathogen, PCRs approaches can be considered as a valid alternative to the cultural ones.

Continuous and Prolonged Intravenous β-Lactam Dosing: Implications for the Clinical Laboratory

Beta-lactam antibiotics serve as a cornerstone in the management of bacterial infections because of their wide spectrum of activity and low toxicity. Since resistance rates among bacteria are continuously on the rise and the pipeline for new antibiotics does not meet this trend, an optimization of current beta-lactam treatment is needed. This review provides an overview of optimization through use of prolonged- and continuous-infusion dosing strategies compared with more traditional intermittent infusions. Included is an overview of the scientific basis for using these nontraditional prolonged- and continuous-infusion-based regimens, with a focus on major areas in which the clinical laboratory can support the clinical use of these regimens.

Genomic Signatures of Emerging Viruses: A New Era of Systems Epidemiology

Compared to classical epidemiologic methods, genomics can be used to precisely monitor virus evolution and transmission in real time across large, diverse populations. Integration of pathogen genomics with data about host genetics and global transcriptional responses to infection allows for comprehensive studies of population-level responses to infection and provides novel methods for predicting clinical outcomes. As genomic technologies become more accessible, these methods will redefine how emerging viruses are studied and outbreaks are contained. Here we review the existing and emerging genomic technologies that are enabling systems epidemiology and systems virology and making it possible to respond rapidly to emerging viruses such as Zika.

How recent advances in molecular tests could impact the diagnosis of pneumonia

Molecular diagnostic tests have been the single major development in pneumonia diagnostics over recent years. Nucleic acid detection tests (NATs) have greatly improved the ability to detect respiratory viruses and bacterial pathogens that do not normally colonize the respiratory tract. In contrast, NATs do not yet have an established role for diagnosing pneumonia caused by bacteria that commonly colonize the nasopharynx due to difficulties discriminating between pathogens and coincidental carriage strains. New approaches are needed to distinguish infection from colonization, such as through use of quantitative methods and identification of discriminating cut-off levels. The recent realization that the lung microbiome exists has provided new insights into the pathogenesis of pneumonia involving the interaction between multiple microorganisms. New developments in molecular diagnostics must account for this new paradigm.

DNA Sequence Signatures for Rapid Detection of Six Target Bacterial Pathogens Using PCR Assays

Using Streptococcus pyogenes as a model, we previously established a stepwise computational workflow to effectively identify species-specific DNA signatures that could be used as PCR primer sets to detect target bacteria with high specificity and sensitivity. In this study, we extended the workflow for the rapid development of PCR assays targeting Enterococcus faecalis, Enterococcus faecium, Clostridium perfringens, Clostridium difficile, Clostridium tetani, and Staphylococcus aureus, which are of safety concern for human tissue intended for transplantation. Twenty-one primer sets that had sensitivity of detecting 5-50 fg DNA from target bacteria with high specificity were selected. These selected primer sets can be used in a PCR array for detecting target bacteria with high sensitivity and specificity. The workflow could be widely applicable for the rapid development of PCR-based assays for a wide range of target bacteria, including those of biothreat agents.