Comparative outcomes of two nasoalveolar molding techniques for unilateral cleft nose deformity

A survey on nasoalveolar moulding treatment practices at cleft centres across India

Background

The purpose of this study is to assess the current protocols followed in the practice of NAM treatment for patients with cleft lip and palate across different comprehensive centres in India.

Design

Cross sectional questionnaire based study.

Method

Comprehensive cleft teams across India were invited to participate in this survey. The questionnaire was developed over four stages, with a panel of eight members. The developed questionnaire consisted of 29 questions that included demographic details, decision-making process, treatment protocols, experiences with treating patients, difficulties and complications encountered during treatment. The results were reported descriptively in percentages.

Results

Of the 46 teams, 39 teams (85%) reported offering NAM before lip surgery, while 15% (n = 7) teams did not offer NAM. Of these 39 teams, almost half (49%, n = 19) of the teams were providing NAM to less than 20% of their patients, 28% (n = 11) of the teams were providing treatment to more than 50%, and the remaining respondents reported (23%, n = 9) providing NAM to 21%-50% of their patients. There is a consensus that NAM is beneficial for both unilateral and bilateral clefts, with the Grayson's method as the most commonly used technique. While there is general agreement on their effectiveness, 15% of participants were unsure. The most frequently reported side effects were cheek and mucosal irritation. Despite these issues, all respondents would recommend NAM treatment.

Conclusion

The survey demonstrated a strong consensus among centers regarding most aspects of NAM treatment. Notably, all respondents expressed their willingness to recommend NAM to their friends and family.

Nasoalveolar Molding in Lately Presented Moderate to Severe Unilateral Cleft Lip and Palate Infants: Does it Add?

Alignment of the alveolar segments with early nasal cartilage tackling is the foundation upon which excellent surgical results are dependent. The purpose is to evaluate the short-term effect of triple combination of passive alveolar molding with early nasal molding augmented by controlled corrective power of lip tapping in lately presented moderate to severe unilateral complete cleft lip and palate infants. A prospective case series study was conducted in Plastic and Maxillofacial Surgery Department, Ain Shams University in collaboration with Orthodontics Department, from January 2021 till June 2023, 15 infants elder than 2 months till 6 months were enrolled in the study. Eight nasal anthropometric measurements ratios through 2-dimension assessment and 4 maxillary arch measurements ratios through 3-dimension assessment were recorded. Extraoral results revealed clinically and statistically decrease of nasal width, alar base width, alar base height ratios, and columellar angle, while increase of nasal height, nasal dome height, columellar length, and alar projection length ratios. Intraoral results revealed clinically and statistically decrease in cleft width with maintained posterior arch width and intercanine width. In conclusion, this triple combination helped in presurgical lessening the alveolar and nasal deformity of such elder infants in a shorter time in comparison with other conventional methods with lesser number of appointments decreasing burden of care to their families improving their compliance.

Effects of nasoalveolar molding on nasolabial aesthetics in patients with cleft lip and palate during pre-adolescence: A systematic review and meta-analysis of retrospective studies

This study aims to analyze long-term effects of nasoalveolar molding (NAM) as a part of cleft primary management protocols on nasolabial aesthetics for patients with non-syndromic cleft lip and palate by conducting a systematic review and meta-analysis. Six electronic databases and two journals were searched up to July 2023. Studies comparing nasolabial outcomes between NAM and non-NAM protocols were selected for further analysis. Nasolabial aesthetics were the outcome of interest. Data extraction, methodological quality assessment, risk of bias assessment, meta-analysis and subgroup analysis were performed. Seven retrospective cohort studies were selected for a qualitative review and four for a quantitative analysis. The risk of bias assessment was moderate for most studies. Only studies utilizing the Asher-McDade rating (AMR) were included for meta-analyses. The protocols with NAM exhibited a significantly lower AMR score for vermillion border than other protocols. AMR scores for nasal form and nasal symmetry from protocols with NAM were significantly lower than protocols without any pre-surgical infant orthopaedics (PSIO) but not significantly different from protocols with other PSIO techniques. The AMR score for nasolabial profile from protocols with NAM was not significantly different from other protocols. However, subgroup analysis demonstrated that protocol combining NAM and primary rhinoplasty significantly lowered AMR scores for nasal form, nasal symmetry and nasolabial profile. For patients with unilateral cleft lip with or without palate (UCLP), this study found that a protocol combining NAM and primary rhinoplasty improved nasolabial outcomes while a protocol with NAM alone offered only limited benefits. For patients with BCLP, the available evidence remains inconclusive. Performing NAM in combination with primary rhinoplasty improves nasolabial aesthetics in patients with UCLP. PROSPERO (CRD4202128384).

Systematic Review and Critical Appraisal of the Evidence Base for Nasoalveolar Molding (NAM)

OBJECTIVE

To critically appraise the body of scientific literature supporting the risks and efficacy of nasoalveolar molding (NAM), specifically in contrast to alternative methods of presurgical infant orthopedics (PSIO) or to treatment without PSIO.

MAIN OUTCOME MEASURES

Five outcome domains were considered: nasolabial aesthetics; dentoalveolar relationship; midfacial growth; cost and burden of care; and number of anesthetic events.

DESIGN

MEDLINE, Embase, and Scopus were queried for articles from the first description of the Grayson-Santiago NAM technique (1993) through December 13, 2021. After the application of inclusionary and exclusionary criteria, selected articles were critically appraised using a systematic framework that included risk of bias assessment using the Cochrane RoB 2.0 and ROBINS-I tools.

RESULTS

A total of 88 studies were included. Level-I and -II evidence showed on par or better approximation and alveolar alignment achieved by NAM compared to other PSIO. Level-II and -III evidence showed improved nasolabial aesthetics compared to other PSIOs. Level-II and -III evidence supported no harm to maxillofacial skeletal growth through age 12. Sparse level-III evidence supported a reduced number of labial or nasal revisions following NAM. Level-II and -III evidence showed NAM requiring upfront cost and frequent appointments but reducing caregiver psychosocial burden and reducing long-term costs compared to select alternatives. Many studies carried a high risk of bias.

CONCLUSIONS

Current evidence supports the overall efficacy of NAM regarding short/mid-term outcomes, with a low risk of negative effects on midfacial growth or dental development. The high risk of bias discovered in many papers underscores the need for robust study design in future research.

Comparison of Facial Growth between Two Nasoalveolar Molding Techniques in Patients with Unilateral Complete Cleft Lip

BACKGROUND

Nasoalveolar molding (NAM) has become standard treatment in the authors' craniofacial center. There are two types of presurgical NAM: the Grayson and Figueroa techniques. The Grayson method involves active alveolar molding, and the Figueroa method involves passive alveolar molding. The authors previously found no differences in number of clinic visits, costs, or 6-month postoperative outcome between the two techniques. The authors extended the previous study to evaluate facial growth between these two groups.

METHODS

In this randomized single-blind study, conducted between May of 2010 and March of 2013, the authors recruited 30 patients with unilateral complete cleft lip and palate and randomized them for Grayson or Figueroa presurgical NAM. Standard lateral cephalometric measurements at 5 years were used to determine facial growth.

RESULTS

Twenty-nine patients completed 5 years of follow-up. There were no statistically significant differences in facial cephalometric measurements between the two groups.

CONCLUSION

Presurgical NAM using either a passive or active NAM technique produced similar facial growth patterns after unilateral cleft lip and palate repair.

CLINICAL QUESTION/LEVEL OF EVIDENCE

Therapeutic, II.

Long-Term Outcome of Primary Rhinoplasty with Overcorrection in Patients with Unilateral Cleft Lip: Avoiding Intermediate Rhinoplasty

BACKGROUND

No consensus exists regarding the timing or technique of rhinoplasty for correction of the unilateral cleft lip nose deformity, with few studies examining the long-term effects of a single technique. This study appraised the long-term outcomes of primary rhinoplasty using the Tajima technique for overcorrection in a cohort of patients with unilateral cleft lip nose deformity after attaining skeletal maturity.

METHODS

Consecutive nonsyndromic patients with unilateral cleft lip nose deformity ( n = 103) who underwent primary rhinoplasty with overcorrection by a single surgeon between 2000 and 2005 were reviewed. Patients with unilateral cleft lip and nasal deformity who underwent primary rhinoplasty (but with no overcorrection) ( n = 30) and noncleft individuals ( n = 27) were recruited for comparison. Outcomes were assessed through FACE-Q scales evaluating satisfaction with appearance of nose and nostrils (two scales) and computer-based objective photogrammetric analysis of nasal symmetry (nostril height, nostril width, nostril area, alar height, and alar width parameters).

RESULTS

Significant differences (all P < 0.001) were observed between the Tajima and non-Tajima groups for all but one photogrammetric nasal parameter (nostril area), with the Tajima group demonstrating closer mean values to the noncleft group. The Tajima and noncleft groups demonstrated no significant difference (all P > 0.05) for scores of FACE-Q nose and nostrils scales.

CONCLUSION

This study indicated that the patients who underwent primary rhinoplasty with overcorrection had improved results with no necessity for intermediate rhinoplasty, emphasizing that the procedure is an effective approach to correct the unilateral cleft nose deformity.

CLINICAL QUESTION/LEVEL OF EVIDENCE

Therapeutic, III.

Three-dimensional Changes of Maxillary Alveolar Morphology After Using Modified Nasoalveolar Molding in Patients with Complete Unilateral Cleft lip and Palate

OBJECTIVE

This study aimed to evaluate the three-dimensional changes in maxillary alveolar morphology after using modified NAM in patients with complete unilateral cleft lip and palate.

DESIGN

This is a retrospective study.

SETTING

The study was carried out in the dental hospital, Faculty of Dentistry of Naresuan University, Phitsanulok, which serves as a tertiary care center.

PATIENTS

The population sample consisted of 19 patients with nonsyndromic complete unilateral cleft lip and palate.

INTERVENTION

All patients received the modified NAM treatment based on the treatment protocol of the Naresuan University Cleft and Craniofacial Center, Thailand.

MAIN OUTCOME MEASURE

Dental models obtained at pre-treatment (T0) and post-treatment (T1) were scanned to construct the digital models. The maxillary digital models that showed dimensional changes between T0 and T1 were measured using a computer graphic software.

RESULTS

The modified NAM resulted in a significant decrease in the anterior cleft width, posterior cleft width, and anterior arch width. Conversely, it caused a significant increase in the length of the lesser cleft segment and the greater segment rotation. However, the change in the height of both segments and posterior arch width was not found to be significant.

CONCLUSIONS

The modified NAM was an effective device for reducing the alveolar cleft width while improving the alignment of alveolar cleft segments.

Effects of Positioning Errors Onto the Ratio and Angle Measurements in Photographs of Patients With Unilateral Cleft Lip and Palate

BACKGROUND

Nasolabial esthetics is 1 of the most important issues in the evaluation of treatment outcomes in patients with unilateral cleft lip and palate (CLP). Frontal and basal view photographs are commonly used to evaluate nasolabial esthetics in patients with unilateral CLP. High-quality photography plays an important role in evaluating the treatment outcomes and poor quality photographs can result in errors, whereas evaluating the treatment results. Facial proportions and angles are important in the esthetic perception of the face. Hence, this study aimed to determine the effects of positioning errors on the ratio and angle measurements in photographs of patients with unilateral CLP.

METHODS

In the clinical and computer environment, a mechanism was set up to take photos at standard and at different angles. A real-size unilateral CLP silicone doll was constructed for the photographs to be taken in the clinical setting. A test-retest was performed to determine the reliability of the measured values.

RESULTS

The correlation coefficients for the first measurement and remeasurement values were statistically significant; positive and strong correlations were obtained.

CONCLUSIONS

Based on the data obtained from our study, the angle and ratio measurements obtained from the two-dimensional photographs provided reliable results.

Complications During Grayson Presurgical Nasoalveolar Molding Method in Nonsyndromic Infants With Complete Unilateral Cleft Lip and Palate

INTRODUCTION

Within the treatment protocols of patients with cleft lip and palate, the nasoalveolar molding (NAM) acquire more followers every day.Their benefits have been well documented, but not equally their complications. The purpose of this study was to describe the complications produced during treatment with Grayson presurgical NAM in nonsyndromic infants with complete unilateral cleft lip and palate.

METHODS

Bibliographic review on 8 databases using search algorithms. By applying the exclusion and inclusion criteria, 21 articles were detected, which were analyzed in full text. Complication, cause, and solution data were presented in supplemental tables.

RESULTS

Complications are related to soft tissues, hard tissues, and those derived from care.

SOFT TISSUES

irritation, ulceration, gingival, facial, or nasal bleeding. Candidiasis. An overexpanded nostril creation to improper placement or modifications of the nasal stent at home.The most frequent were lip and cheeks skin irritation by taping, and gingival ulceration due to excessive pressure.

HARD TISSUES

misalignment of alveolar segments and the premature eruption of teeth.

DERIVED FROM CARE

inadequate device retention, adherence problems to treatment, poor/excessive care of the caregiver, intolerance to the device, eating problems, breathing, and socioeconomic issues.

CONCLUSIONS

The main complications occur in soft tissues, related to the retention mechanisms and an inadequate adjustment of the device.The benefits of NAM exceed the complications. It is necessary to know them to avoid any harmful results since they could prolong or stop the treatment, compromising the result. The active collaboration of the family in the insertion and maintenance of the device is crucial for success.

Comparative evaluation of nasal and alveolar changes in complete unilateral cleft lip and palate patients using intraoral and extraoral nasoalveolar molding techniques: randomized controlled trial

Objectives

Cleft lip and palate is a common congenital anomaly that impairs the aesthetics, speech, hearing, and psychological and social life of an individual. To achieve good aesthetic outcomes, presurgical nasoalveolar molding (NAM) has become important. Currently, the intraoral NAM technique is widely practiced. Numerous modifications have been made to intraoral NAM techniques, but the original problem of compliance leading to discontinuation of treatment remains unsolved. Therefore, the present study compared an extraoral NAM technique with the intraoral NAM technique.

Materials and Methods

Twenty infants with complete unilateral cleft lip and palate were included and divided into two equal groups. Group A received the intraoral NAM technique, and Group B received the extraoral NAM technique. Pre- and postoperative extraoral and intraoral measurements were recorded.

Results

Groups A and B did not differ significantly in any extraoral or intraoral parameter.

Conclusion

The extraoral NAM technique is as effective as the intraoral NAM technique in achieving significant nasal and alveolar changes in com-plete unilateral cleft lip and palate patients. Additionally, it reduces the need for frequent hospital visits for activation and the stress associated with the insertion and removal of the intraoral NAM plate, thereby improving compliance.

Effect of Cleft Width on the Outcome of Presurgical Nasoalveolar Molding in Patients With Unilateral Cleft Lip and Palate

ABSTRACT

The purpose of this study was to investigate the short-term effects of presurgical nasoalveolar molding (PNAM) according to cleft width (CW) in patients with unilateral cleft lip and palate (UCLP). In this retrospective study, 32 newborns with nonsyndromic UCLP treated with PNAM were allocated to 2 groups based on CW (group A, CW ≤5 mm; and group B, CW >5 mm). The following measurements were carried out using standardized photographs taken before and after PNAM therapy (before primary lip surgery): nostril axis inclination of healthy (NAI-NC) and cleft sides (NAI-C), columellar angle (CA), nasal base inclination (NBI), nasal floor width ratio (NFWR), alar base height ratio (ABHR), and columellar length ratio. Before PNAM therapy, there were significant differences between the 2 groups with respect to NAI-C, NBI, NFWR, and ABHR, indicating greater deformation of the nose in group B. After PNAM therapy, CA, NAI-C, NAI-NC, NFWR, and columellar length ratio were significantly improved in both the groups, whereas NBI and ABHR significantly worsened in group B. The improvement in CA, NAI-C, and NFWR was significantly greater in group B. Although a larger CW had some negative effects on the outcome of PNAM, it was found to be advantageous for nasal symmetry, if initiated as early as possible. Nevertheless, it is important to consider those aspects of the nasolabial area that are involved in the perception of symmetry when evaluating the effect of CW on PNAM outcomes in UCLP.

Patient satisfaction and quality of life after orthodontic treatment for cleft lip and palate deformity

OBJECTIVES

Patients with cleft lip-cleft palate (CLP) often require orthodontic treatment, with or without orthognathic surgery. Patient satisfaction is the most important outcome parameter in orthodontic treatment. This study aimed to (1) determine patient satisfaction and quality of life (QoL) after orthodontic treatment and (2) identify associated factors.

MATERIAL AND METHODS

This prospective cross-sectional study recruited patients with CLP who had completed orthodontic treatment at a craniofacial center in Taiwan. Participants (N=213) had received treatment for unilateral CLP (n=99), bilateral CLP (n=50), cleft lip and alveolus (n=39), and isolated cleft palate (n=25). Self-report questionnaires evaluated satisfaction with appearance and QoL; multiple regression analysis examined associated factors. Participants' expectations of treatment results were also reported.

RESULTS

Participants reported moderate satisfaction with facial appearance and QoL. Satisfaction with treatment was lower or much lower than expected for 13% of participants. Treatment for bilateral CLP was associated with the lowest satisfaction with overall appearance (r = -8.123, P < 0.05); participants who had received orthognathic surgery had the highest satisfaction (r = 5.534, P < 0.05). Treatment for unilateral and bilateral CLP was associated with low QoL for smile (both P < 0.05).

CONCLUSIONS

Orthodontic treatment had a positive effect on facial appearance and quality of life in patients with CLP. Type of cleft and orthognathic surgery significantly influenced satisfaction with facial appearance.

CLINICAL RELEVANCE

Efforts must be taken to modify treatment strategies for patients with bilateral CLP in order to improve satisfaction with appearance following treatment.

Comparative Photographic, Retrospective Analysis of Nonsyndromic Cleft Noses Treated with or without NAM

Supplemental Digital Content is available in the text.

Background:

Long-term results and efficacy of nasoalveolar molding (NAM) on the perinasal region are reported controversially in the literature. With this study, we demonstrate our experiences, contribute to the ongoing discussion, and describe our decision-making when NAM is indicated or not.

Methods:

Conventional pre- and postinterventional photographs of patients with nonsyndromic unilateral and bilateral cleft lip and palate (UCLP and BCLP) were analyzed. The 2 independent raters were blinded to therapy (NAM versus non-NAM), and 7 parameters were measured. Intraclass correlation coefficient for intra- and interrater reliability was calculated. The Mann–Whitney U test was performed to compare therapy- and appearance-matched pairs. Finally, 30 specialists in cranio-maxillofacial surgery performed a subjective, blinded rating of matched NAM and non-NAM cases.

Results:

Thirty-six patients, 16 UCLP and 20 BCLP, were enrolled. The intraclass correlation coefficients for intra- and interrater reliability were excellent for all measurements, except for nasal sill (0.77 intrarater and 0.80 interrater). Height-to-width ratio (P = 0.012) was significantly different in the comparison of non-NAM and NAM-treated severe cases with UCLP. Thirty blinded raters evaluated NAM-treated cases with severe UCLP better than matched non-NAM cases. Non-NAM-treated cases with moderate UCLP and BCLP were rated better than matched NAM cases.

Conclusions:

Children with severe UCLP may benefit from NAM therapy in the sense of better symmetry and a more homogenous appearance. Patients with moderate UCLP and BCLP did not benefit, and the risk of the burden of care increased.

Short-Term Efficacy of Presurgical Vacuum Formed Nasoalveolar Molding Aligners on Nose, Lip, and Maxillary Arch Morphology in Infants With Unilateral Cleft Lip and Palate: A Prospective Clinical Trial

OBJECTIVES

The purpose of this study was to evaluate the short-term effect of series of preadjusted vacuum formed nasoalveolar molding VF NAM aligners on the morphology of nose, lip, and maxillary arch in infants with unilateral cleft lip and palate (UCLP).

DESIGN

Prospective clinical trial.

SETTING

Unilateral cleft lip and palate patients referred to outpatients' clinic.

PATIENTS

Sixteen nonsyndromic infants with UCLP, less than 2 months of age were included from April 2017 to April 2018.

INTERVENTIONS

All infants received VF NAM therapy. Standardized digital frontal and basilar photographs and 3D digital models were taken before initiation of VF NAM therapy (T1) and after completion of VF NAM therapy (T2).

MAIN OUTCOME MEASURE(S)

Changes in morphology of the nose, lip, and maxillary arch.

RESULTS

Statistical analysis comparing T1 and T2 measurements was performed. Frontal and basilar photographic analysis showed a statistically significant reduction of columella displacement, interlabial gap distance, and nostril width at cleft side (CS), while the nasal height, nostril height at CS, nostril width at noncleft side (NCS), columella deviation angle, nasal tip protrusion, and nostril area at both CS and NCS increased significantly with VF NAM therapy. The nasal width, nostril height at NCS showed no significant change after presurgical VF NAM aligners therapy. The analysis of digital models demonstrated a statistically significant reduction of alveolar cleft width, anterior arch width, arch length, midline deviation, and palatal cleft width, while the posterior arch width and arch perimeter increased significantly with VF NAM therapy.

CONCLUSION

Vacuum formed NAM therapy was effective in reducing the nasoalveolar deformities associated with infants with UCLP and improved the alveolar morphology and nasal symmetry.

A Surgical and Educational Video of the Inferior Turbinate Mucosal Flap for the Nasal Floor and Intraoral Reconstruction in Unilateral Complete Cleft Lip Repair

Since the original description of Millard rotation advancement principle for cleft lip repair, many important contributions have subsequently been described by other surgeons worldwide. However, the reconstruction of the nasal floor and intraoral lining has received less attention over time. This article demonstrates a modified unilateral complete cleft lip repair using the rotation advancement principle plus multipurpose inferior turbinate mucosal flap. The accompanying videos display the 10 key steps for rationale, design, and proper execution of the inferior turbinate mucosal flap for the nasal floor and intraoral reconstruction.

What Is the Burden of Care of Nasoalveolar Molding?

OBJECTIVE

This systematic review aims to evaluate nasoalveolar molding (NAM) in the context of burden of care defined as physical, psychosocial, or financial burden on caregivers.

SEARCH METHODS

Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, 5 databases were searched from inception through December 24, 2019, for keywords and subject headings pertaining to cleft lip and/or palate and NAM.

ELIGIBILITY CRITERIA

Clinical studies on NAM with reference to physical (access to care, number of visits, distance traveled), psychosocial (caregiver perceptions, family interactions, breast milk feeding), and financial (direct and indirect costs) burden were included.

DATA COLLECTION AND ANALYSIS

Study selection was performed by 2 independent reviewers.

RESULTS

The search identified 1107 articles and 114 articles remained for qualitative synthesis. Burden of care domains were discussed but not measured in 43% of articles and only 25% assessed burden of care through a primary outcome. Of these, 20 articles reported on physical, 8 articles on psychosocial, and 12 articles on financial burden. Quality of evidence is limited by study design and risk of bias.

CONCLUSION

Nasoalveolar molding has been indiscriminately associated with burden of care in the literature. Although NAM may not be the ideal treatment option for all patients and families, the physical considerations are limited when accounting for the observed psychosocial advantages. Financial burden appears to be offset, but further research is required. Teams should directly assess the impact of this early intervention on the well-being of caregivers and advance strategies that improve access to care.

Primary Repair in Patients With Unilateral Complete Cleft of Lip and Primary Palate: Assessment of Outcomes

OBJECTIVE

Asymmetry of median facial structures is a major concern for patients with unilateral cleft lip and palate, and the principal goal of its treatment is to restore symmetry. Unilateral complete cleft of lip and primary palate (UCCLPP) is an uncommon subgroup and rarely reported. Patients with UCCLPP have protruding and deviating premaxilla, rendering a primary repair difficult. This study evaluated consecutive patients with UCCLPP and presented their treatment outcome.

METHODS

We assessed 36 patients with UCCLPP and collected clinical information. Surgical repair was performed at 3 months of age by using a modified rotation-advancement method and primary nasal reconstruction. A single surgeon performed all surgical procedures. A postoperative nasal stent was used for 6 months. Follow-up standardized photographs were collected. Landmarks were identified, and nose and lip dimensions measured. The ratios of the corresponding parameters (cleft vs noncleft side) were obtained for evaluating nose and lip symmetry.

RESULTS

No surgical complication was noted in any patient. The overall lip and nose outcome after the primary repair were adequate, and all ratios were close to 1. The nostril width was slightly wider on the cleft side, but the alar width and height were acceptable. The lip heights were balanced between the 2 sides. Patients who received presurgical nasoalveolar molding did not show more favorable lip and nose dimensions, except for the medial philtral height.

CONCLUSION

Even in the presence of protruding and deviating premaxilla, our patients with UCCLPP obtained adequate lip and nose outcome after undergoing primary lip repair and nasal reconstruction.

Comparative Analysis of Three-Dimensional Nasal Shape of Casts from Patients With Unilateral Cleft Lip and Palate Treated at Two Institutions Following Rotation Advancement Only (Iowa) or Nasoalveolar Molding and Rotation Advancement in Conjunction With Primary Rhinoplasty (New York)

OBJECTIVES

To compare 3-dimensional nasal symmetry in patients with UCLP who had either rotation advancement alone or nasoalveolar molding (NAM) followed by rotation advancement in conjunction with primary nasal repair.

DESIGN

Pilot retrospective cohort study.

MATERIALS AND METHODS

Nasal casts of 23 patients with UCLP from 2 institutions were analyzed; 12 in the rotation advancement only group (Iowa) and 11 in the NAM, rotation advancement with primary nasal repair group (New York). Casts from patients aged 6 to 18 years were scanned using the 3Shape scanner and 3-dimensional analysis of nasal symmetry performed using 3dMD Vultus software, Version 2507, 3dMD, Atlanta, GA. Cleft and noncleft side columellar height, nasal dome height, alar base width, and nasal projection were linearly measured. Inter- and intragroup analyses were performed using t tests and paired t tests as appropriate.

RESULTS

A statistically significant difference in mean-scaled 3-dimensional asymmetry index was found between groups with group 1 having a larger measure of asymmetry (4.69 cm³) than group 2 (2.56 cm³; P = .02). Intergroup analysis performed on the most sensitive linear measure, alar base width, revealed significantly less asymmetry on average in group 2 than in group 1 ( P = .013).

CONCLUSION

This study suggests the NAM followed by rotation advancement in conjunction with primary nasal repair approach may result in less nasal asymmetry compared to rotation advancement alone.

Initial experiences with NAM-assisted primary repair of the BCLP deformity

BACKGROUND

Primary surgical repair of the bilateral cleft lip and palate (BCLP) deformity is challenging. Infant Orthopedic (IO) procedures are often used to assist surgical reconstruction of normal anatomy. Nasoalveolar molding (NAM) is a presurgical infant orthopedic procedure that attempts to reduce the cleft nasal deformity, in addition to the lip and alveolus, leading to an esthetic primary surgical repair.

OBJECTIVE

NAM provides the surgical team with a better foundation for an easier and more esthetic single stage repair at the level of nose in addition to the lip and alveolus.

METHOD

Infant nasal cartilages are amenable to correction with NAM in the first few weeks of infancy when they retain their plasticity. NAM-assisted surgical repair of a complete BCLP infant is discussed. Postoperatively nasal stents were used to retain results and minimize relapse.

RESULTS

NAM helped correct premaxillary deviation and protrusion, reduce alveolar cleft width and improve the nasal morphology prior to surgery in the BCLP infant.

CONCLUSIONS

NAM helped reduce the severity of the cleft deformity in the BCLP infant and facilitated an easier and esthetic single stage primary surgical repair.

The role of Nasoalveolar molding: A 3D Prospective analysis

Nasoalveolar molding (NAM) is commonly employed to reduce the alveolar segments into proper alignment and to improve nasal symmetry in patients with cleft lip and palate. This study examines the periodical progression of NAM treatment over time. 20 patients with complete unilateral cleft lip and palate were prospectively recruited. A 2 stage NAM treatment protocol was applied. Stage 1 involved adjustment of the alveolar segments (mean age 15.6 days), while Stage 2 added nasal stents and started average 43 days after stage 1. 3D images (n = 241) were obtained prior to NAM initiation and weekly until the end of treatment. The cleft lip area, bilateral nostril areas, and the nostril height and width were measured. Treatment was assessed in the Cleft (C) side and the Non-cleft (N). There was significant difference in the C/N ratio of the nostril area, width, and height at pre-treatment (0.9 ± 0.3, 4.1 ± 1.1, and 0.5 ± 0.2), at the end of stage 1 (1.1 ± 0.3, 2.2 ± 0.6, and 0.8 ± 0.2), and at the end of stage 2 treatment (1.8 ± 0.3, 1.8 ± 0.4, and 1.2 ± 0.1); p < 0.05. Comparative 3D analysis with dense sampling offers a precise methodology for showing effects of NAM treatment. The morphological changes achieved with NAM therapy occur in early treatment phase.

Correlation between Nasoalveolar Molding and Surgical, Aesthetic, Functional and Socioeconomic Outcomes Following Primary Repair Surgery: a Systematic Review

OBJECTIVES

The authors performed a systematic review to evaluate the potential beneficial effects of the nasoalveolar molding appliance on nonsyndromic unilateral clefts of the lip and/or palate prior to primary lip repair.

MATERIAL AND METHODS

A literature search was performed using three electronic databases (PubMed, Embase, Web of Science) and three journals ("Cleft Palate-Craniofacial Journal", "Plastic and Reconstructive Surgery Journal" and "American Journal of Orthodontics and Dentofacial Orthopaedic") from January 1980 to April 2017. Data extraction was performed with tables treating different subjects: surgical, aesthetical, functional, socio-economical effects of nasoalveolar molding (NAM) appliances and the evolution of NAM appliances, especially three-dimensional technology.

RESULTS

Of the 145 articles retrieved in the literature surveys, 28 were qualified for the final analysis and 20 studies were excluded because of their small sample size (less than 10 patients) and/or too long follow-up (exceeded 18 months). Four randomized controlled trials were available. Although literature allowed discussing the short-term benefits of NAM appliance and the three-dimensional technology, scientific evidence is lacking.

CONCLUSIONS

Based on the results, nasoalveolar molding appliances have positive surgical, aesthetical, functional and socio-economical effects on unilateral clefts of the lip and/or palate treatment before the primary repair surgeries. Three-dimensional technology results in a more efficient and predictable nasoalveolar molding appliance treatment. However, nasoalveolar molding appliance effect in a short term remains unclear with the available literature. Further studies that integrate three-dimensional technology in a large scale are still needed.

Presurgical Nasoalveolar Molding Therapy Using Figueroa's NAM Technique in Unilateral Cleft Lip and Palate Patients: A Preliminary Study

OBJECTIVE

The objective of the study was to evaluate the results of nasoalveolar molding (NAM) in the treatment of patients with unilateral cleft lip and palate using a modified technique in a South Indian population.

STUDY DESIGN

The design was a prospective study with blinded measurements. The sample constituted 10 complete unilateral cleft lip and palate (UCLP) patients who underwent NAM therapy by the same operator. Direct extra and intra oral anthropometric measurements were done using a digital vernier caliper before and after NAM therapy. A photographic evaluation was also done to rate the nasal deformity post NAM therapy. The differences between measurements were statistically analyzed using paired t tests.

RESULTS

The extra oral measurements revealed a statistically significant increase in bi-alar width, columellar length and width. The intraoral measurements demonstrated a statistically significant reduction in anterior alveolar cleft width. There was also a significant increase in arch width and greater and lesser segments length. All cases were rated as improved by the surgeons in photographic analysis.

CONCLUSION

The study has quantitatively shown that the modified NAM therapy improved nasal asymmetry by columellar lengthening and effectively molded the maxillary alveolar arch.

Pitfalls and solutions in virtual design of nasoalveolar molding plates by using CAD/CAM technology--A preliminary clinical study

PURPOSE

Computer-assisted design and computer-aided manufacturing (CAD/CAM) technology in nasoalveolar molding (NAM) should save time and manpower and reduce family input in cases of cleft lip and palate.

MATERIAL AND METHODS

Intraoral casts from 12 infants with complete unilateral cleft lip and palate were taken immediately after birth (T1) and after (T2) NAM treatment, digitalized, and transformed into STL data. The infants were randomized into Group 1 (n = 6) receiving conventional NAM treatment or Group 2 receiving CAD/CAM NAM (n = 6). We analyzed the following variables by using Geomagic software: intersegmental alveolar distance (ISAD); intersegmental lip distance (ISLD); nostril height cleft/noncleft (NHc/nc); nasal width cleft/noncleft (NWn/nc); and columella deviation angle (CDA).

RESULTS

In both groups, all variables except NHnc and NWnc were changed significantly between T1 and T2. The analysis of the mean differences of the variables in Group 1 and 2 showed no significant differences, with a comparable incidence of clinical alterations such as skin or mucosal irritations.

CONCLUSION

NAM plates can be produced virtually by using CAD/CAM technology. The CAD/CAM NAM results show no significant differences from the conventional technique. We present our clinically usable virtual CAD/CAM workflow for producing a basic NAM plate.

Analysis of alar balance in secondary cleft lip with Z-plasty technique of nasal cartilage

The cleft nasal deformity is a prevailing problem of complex challenge for plastic surgery, especially in the secondary correction. We mainly chose 40 patients with unilateral secondary cleft lip nasal deformity with alar collapse. Based on biomechanics and anatomy of nasal cartilage, we adapt a Z-plasty with cartilage mucosa using the deformed lateral crus of the upper lateral cartilage to support the collapse of lower lateral cartilage. All of our patients were satisfied with the aesthetic morphology after surgery, so we are confident that this method should be considered as an auxiliary treatment to rhinoplasty.

A modified nasoalveolar molding technique for correction of unilateral cleft nose deformity

INTRODUCTION

Traditional Figueroa nasoalveolar molding (NAM) requires weekly or biweekly adjustments to remove acrylic from the palatal plate to narrow the alveolar gap. These frequent adjustments create a burden for patients living far from a hospital. To minimize this burden, we developed a modified NAM technique using simplified lip taping and a passive palatal plate. Herein we present our clinical experience and outcomes using the traditional and modified methods.

MATERIAL AND METHODS

In this blinded, retrospective study of 66 patients with complete unilateral cleft lip and palate, 33 received the traditional NAM and 33 received the modified NAM. Pretreatment and posttreatment facial photographs and clinical charts were used to compare efficacy (nostril height ratio, nostril width ratio, columellar angle, nasal base angle), efficiency (molding frequency), incidence of complications (facial irritation, mucosal ulceration), and medical cost.

RESULTS

Traditional and modified NAM did not differ in treatment efficacy for nostril height ratio (0.88 ± 0.14 vs. 0.90 ± 0.12), nostril width ratio (2.22 ± 0.39 vs. 2.38 ± 0.50), columellar angle (73.5 ± 9.1 degrees vs. 71.3 ± 11.8 degrees), nasal base angle (5.1 ± 2.4 degrees vs. 5.9 ± 2.7 degrees), or alveolar gap width (2.0 ± 2.0 mm vs. 2.0 ± 1.7 mm) (all p > 0.05). Traditional NAM was less efficient, i.e., required more adjustments (8.6 ± 2.0 vs. 6.7 ± 1.1), and cost more (22016.4 ± 2012.7 New Taiwan dollars vs. 20137.6 ± 1173.4 New Taiwan dollars) (both p < 0.001).

CONCLUSIONS

Both NAM techniques similarly improved nasal deformities and reduced alveolar gaps, but the modified technique was more efficient and cost less in terms of insurance reimbursement and supplies (labial tapes).

Presurgical nasoalveolar molding therapy in cleft lip and palate individuals: Case series and review

The nasoalveolar molding (NAM) therapy is advocated to reduce the severity of alveolar cleft and nasal deformity. NAM therapy has demonstrated to be an effective method for reducing cleft and improve nose anatomy. This paper presents a case report of three cleft lip and palate individuals treated with NAM therapy. Furthermore, the paper highlights the advantages of NAM therapy along with an enumeration of literature suggesting in favor of NAM therapy and otherwise. Regardless of controversies and divergent views involved with NAM therapy, the immediate success of NAM therapy facilitating primary lip repair surgery cannot be under-emphasized.

Nasoalveolar molding in cleft care--experience in 40 patients from a single centre in Germany

Nasoalveolar molding (NAM) has gained wide acceptance and evidence in cleft therapy. However, standardized treatment protocols and experiences recorded from European centres are lacking. The results of 40 infants with cleft lip and palate treated with presurgical NAM according to the Grayson technique were analyzed. Standardized parameters of cleft width and nasal symmetry were measured in pre- and posttreatment plaster casts and in digitalized 3-dimensional STL models. Statistical analyses were performed by using Student´s t-test in a per-protocol manner. 27 out of 40 infants completed NAM and were analyzed. In 13 patients NAM was either temporarily interrupted or terminated prematurely due to skin irritations or lack of parental support. These cases were excluded from statistical analysis, resulting in a drop-out rate of 32.5%. Intersegmental alveolar distance (ISAD), intersegmental lip distance (ISLD), nostril height (NH), nostril width (NW) and columella deviation angle (CDA) were significantly changed in unilateral cleft lip and palate (UCLP) (n = 8). In unilateral cleft lip (UCL) (n = 9), only ISLD, NH and CDA were significantly changed. ISAD of the right and left side, ISLD of the right and left side, premaxilla deviation angle, nostril height and columella length were changed significantly in bilateral cleft lip and palate (BCLP) cases (n = 10). NAM is a suitable presurgical treatment modality. A positive effect has been seen in UCLP and BCLP infants, as compared with their birth status.

Clinical Management of BCLP With a Severe Hypoplastic and Retruded Premaxilla

Bilateral cleft lip and palate with a severe hypoplastic and backward rotated premaxilla and lack of soft tissues is a rare congenital facial deformity. No treatment protocol for this type of cleft is widely accepted. In patient with bilateral cleft lip and palate, the premaxilla was protracted by nasoalveolar molding before lip surgery. The nasal tip was elevated and the columella lengthened by nasal components incorporated into the palatal guidance plate. After 4 months of nasoalveolar molding, surgery could be performed without complications. Postoperative use of a guidance plate prevented relapse of the premaxillary segment, the nasal conformers maintained the nostril form.

Comparative outcomes of two nasoalveolar molding techniques for bilateral cleft nose deformity

BACKGROUND

Bilateral cleft nose deformity is increasingly being treated before primary repair with nasoalveolar molding. With the Grayson technique, nasal molding is started when the alveolar gap is reduced to 5 mm, whereas with the Figueroa technique, nasal molding and alveolar molding are performed at the same time. Both techniques significantly lengthen the columella, but their comparative efficacy, efficiency, and incidence of complications have not been investigated.

METHODS

In this blinded, retrospective study of 58 patients with complete bilateral cleft lip-cleft palate, 27 underwent Grayson nasoalveolar molding and 31 underwent Figueroa nasoalveolar molding. Outcomes were compared by analyzing pretreatment and posttreatment facial photographs and clinical charts for efficacy (i.e., columella length ratio, alar width ratio, alar base width ratio, nostril shape, nasal tip angle, nasolabial angle, and nasal base angle), efficiency (i.e., molding frequency), and incidence of complications (e.g., facial irritation and oral mucosal ulceration).

RESULTS

Grayson and Figueroa nasoalveolar molding did not differ in treatment efficacy for columellar length ratio, alar width ratio, alar base width ratio, nostril shape, nasal tip angle, nasolabial angle, or nasal base angle (all p > 0.05). Grayson nasoalveolar molding was less efficient (i.e., required more adjustments) (10.8 ± 4.1 versus 7.6 ± 1.5; p = 0.001) and had a higher incidence of oral mucosal ulceration (26 percent versus 3 percent; p < 0.05).

CONCLUSIONS

Both Grayson and Figueroa nasoalveolar molding similarly improve nasal deformities and reduce alveolar gaps; however, the Figueroa technique is associated with fewer oral mucosal complications and more efficiency.