Transparent functional nanocomposite films based on octahedral metal clusters: synthesis by electrophoretic deposition process and characterization

A review on functional nanoarchitectonics nanocomposites based on octahedral metal atom clusters (Nb6, Mo6, Ta6, W6, Re6): inorganic 0D and 2D powders and films

This review is dedicated to various functional nanoarchitectonic nanocomposites based on molecular octahedral metal atom clusters (Nb₆, Mo₆, Ta₆, W₆, Re₆). Powder and film nanocomposites with two-dimensional, one-dimensional and zero-dimensional morphologies are presented, as well as film matrices from organic polymers to inorganic layered oxides. The high potential and synergetic effects of these nanocomposites for biotechnology applications, photovoltaic, solar control, catalytic, photonic and sensor applications are demonstrated. This review also provides a basic level of understanding how nanocomposites are characterized and processed using different techniques and methods. The main objective of this review would be to provide guiding significance for the design of new high-performance nanocomposites based on transition metal atom clusters.

High performance {Nb5TaX12}@PVP (X = Cl, Br) cluster-based nanocomposites coatings for solar glazing applications

The development of highly ultraviolet (UV) and near-infrared (NIR) absorbent transparent coatings is an important enabling technology and area of research for environmental sustainability and energy conservation. Different amounts of K₄[{Nb₅TaXⁱ ₁₂}X^a ₆] cluster compounds (X = Cl, Br) dispersed into polyvinylpyrrolidone matrices were prepared by a simple, nontoxic and low-cost wet chemical method. The resulting solutions were used to fabricate visibly transparent, highly UV and NIR absorbent coatings by drop casting. The properties of the solution and films were investigated by complementary techniques (optical absorption, electrospray ionization mass spectrometry and Raman spectroscopy). The UV and NIR absorption of such samples strongly depended on the concentration, dispersion and oxidation state of the [{Nb₅TaXⁱ ₁₂}X^a ₆] nanocluster-based units. By varying and controlling these parameters, a remarkable improvement of the figures of merit T_L/T_E and S_NIR for solar-glazing applications was achieved compared to the previous results on nanocomposite coatings based on metal atom clusters.

Controlling the Deposition Process of Nanoarchitectonic Nanocomposites Based on {Nb6-xTaxXi12}n+ Octahedral Cluster-Based Building Blocks (Xi = Cl, Br; 0 ≤ x ≤ 6, n = 2, 3, 4) for UV-NIR Blockers Coating Applications

The antagonism between global energy needs and the obligation to slow global warming is a current challenge. In order to ensure sufficient thermal comfort, the automotive, housing and agricultural building sectors are major energy consumers. Solar control materials and more particularly, selective glazing are part of the solutions proposed to reduce global energy consumption and tackle global warming. In this context, these works are focused on developing new highly ultraviolet (UV) and near-infrared (NIR) absorbent nanocomposite coatings based on K₄[{Nb_6-xTa_xXⁱ₁₂}X^a₆]. (X = Cl, Br, 0 ≤ x ≤ 6) transition metal cluster compounds. These compounds contain cluster-based active species that are characterized by their strong absorption of UV and NIR radiations as well as their good transparency in the visible range, which makes them particularly attractive for window applications. Their integration, by solution processes, into a silica-polyethylene glycol or polyvinylpyrrolidone matrices is discussed. Of particular interest is the control and the tuning of their optical properties during the integration and shaping processes. The properties of the solutions and films were investigated by complementary techniques (UV-Vis-NIR spectrometry, ESI-MS, SEM, HRTEM, etc.). Results of these works have led to the development of versatile solar control coatings whose optical properties are competitive with commercialized material.

Nanoarchitectonics of Glass Coatings for Near-Infrared Shielding: From Solid-State Cluster-Based Niobium Chlorides to the Shaping of Nanocomposite Films

The high potential of [{Nb₆Clⁱ₁₂}L^a₆] cluster-based building blocks as near-infrared radiation blockers for energy saving applications is exposed in the present paper (i = inner edge-bridging ligand, a = apical ligand of the Nb₆; L = H₂O and/or Cl). To do so, a combined experimental and theoretical investigation of edge-bridged [{Nb₆Clⁱ₁₂}Cl^a_6-x(H₂O)_x]^m+/0/n- cluster unit series (x = 0, 4, 6; m = 2, 3, 4; n = 2, 3, 4) has been carried out. By using the K₄[{Nb₆Clⁱ₁₂}Cl^a₆] starting solid-state precursor, we explored the behavior of the [{Nb₆Clⁱ₁₂}Cl^a₆]^4- cluster unit during the different steps of its integration as a building block into a polyvinylpyrrolidone (PVP) matrix to form a glass coating composite denoted {Nb₆Clⁱ₁₂}^m+@PVP (m = 2 or 3). The optical, vibrational and redox properties [{Nb₆Clⁱ₁₂}Cl^a_6-x(H₂O)_x]^m+/0/n- building blocks have been interpreted with the support of electronic structure calculations and simulation of properties. The chemical modifications and oxidation properties have been identified and studied thanks to various techniques in solution. Combining Raman and ultraviolet-visible spectroscopies, electrochemistry, and quantum chemical simulations, we bring new knowledge to the understanding of the evolution of the properties of the [{Nb₆Clⁱ₁₂}Cl^a_6-x(H₂O)_x]^m+/0/n- cluster units as a function of the number of valence electron per cluster (VEC) and the nature of terminal ligands (x = 0, n = 4; x = 4, charge = 0; x = 6, m = 4). The fine understanding of the physical properties and vibrational fingerprints depending on the VEC and chemical modifications in solution are mandatory to master the processing of cluster-based building blocks for the controlled design and shaping of glass coating nanocomposites. On the basis of this acquired knowledge, [{Nb₆Clⁱ₁₂}Cl^a_6-x(H₂O)_x]^m+/0/n- building blocks were embedded in a PVP matrix. The resulting {Nb₆Clⁱ₁₂}²⁺@PVP nanocomposite film shows excellent ultraviolet (UV, 280-380 nm) and near-infrared (NIR, 780-1080 nm) blocking ability (>90%) and a highly visible light transmittance thanks to the controlled integration of the {Nb₆Clⁱ₁₂}²⁺ cluster core. The figures of merit (FOM) value of T_vis/T_sol (T_vis = visible transmittance and T_sol = solar transmittance) as well as the haze, clarity, and the NIR shielding values (S_NIR) were measured. After optimization of the integration process, a {Nb₆Clⁱ₁₂}²⁺@PVP nanocomposite on glass substrate has been obtained with a high FOM equal to 1.29. This high value places the transparent green olive {Nb₆Clⁱ₁₂}²⁺@PVP nanocomposites at the top system in the benchmark in the field of glass coating composites for energy-saving applications.

Revisiting properties of edge-bridged bromide tantalum clusters in the solid-state, in solution and vice versa: an intertwined experimental and modelling approach

Edge-bridged halide tantalum clusters based on the {Ta₆Br₁₂}⁴⁺ core have been the topic of many physicostructural investigations both in solution and in the solid-state. Despite a large number of studies, the fundamental correlations between compositions, local symmetry, electronic structures of [{Ta₆Brⁱ₁₂}L^a₆]^m+/n- cluster units (L = Br or H₂O, in solution and in the solid-state), redox states, and vibrational and absorption properties are still not well established. Using K₄[{Ta₆Brⁱ₁₂}Br^a₆] as a starting precursor (i: inner and a: apical), we have investigated the behavior of the [{Ta₆Brⁱ₁₂}Br^a₆]^4- cluster unit in terms of oxidation properties and chemical modifications both in solution (water and organic solvent) and after recrystallization. A wide range of experimental techniques in combination with quantum chemical simulations afford new data that allow the puzzling behavior of the cluster units in response to changes in their environment to be revealed. Apical ligands undergo changes like modifications of interatomic distances to complete substitutions in solution that modify noticeably the cluster physical properties. Changes in the oxidation state of the cluster units also occur, which modify significantly their physical properties, including optical properties, which can thus be used as fingerprints. A subtle balance exists between the number of substituted apical ligands and the cluster oxidation state. This study provides new information about the exact nature of the species formed during the transition from the solid-state to solutions and vice versa. This shows new perspectives on optimization protocols for the design of Ta₆ cluster-based materials.

Electrophoretically Deposited Layers of Octahedral Molybdenum Cluster Complexes: A Promising Coating for Mitigation of Pathogenic Bacterial Biofilms under Blue Light

The fight against infective microorganisms is becoming a worldwide priority due to serious concerns about the rising numbers of drug-resistant pathogenic bacteria. In this context, the inactivation of pathogens by singlet oxygen, O₂(¹Δ_g), produced by photosensitizers upon light irradiation has become an attractive strategy to combat drug-resistant microbes. To achieve this goal, we electrophoretically deposited O₂(¹Δ_g)-photosensitizing octahedral molybdenum cluster complexes on indium-tin oxide-coated glass plates. This procedure led to the first example of molecular photosensitizer layers able to photoinactivate bacterial biofilms. We delineated the morphology, composition, luminescence, and singlet oxygen formation of these layers and correlated these features with their antibacterial activity. Clearly, continuous 460 nm light irradiation imparted the layers with strong antibacterial properties, and the activity of these layers inhibited the biofilm formation and eradicated mature biofilms of Gram-positive Staphylococcus aureus and Enterococcus faecalis, as well as, Gram-negative Pseudomonas aeruginosa and Escherichia coli bacterial strains. Overall, the microstructure-related oxygen diffusivity of the layers and the water stability of the complexes were the most critical parameters for the efficient and durable use. These photoactive layers are attractive for the design of antibacterial surfaces activated by visible light and include additional functionalities such as the conversion of harmful UV/blue light to red light or oxygen sensing.

ITO@SiO2 and ITO@{M6Br12}@SiO2 (M = Nb, Ta) nanocomposite films for ultraviolet-near infrared shielding

Transparent optical thin films for energy saving applications have recently gained substantial prominence for functional window processes. In this study, highly visible transparent nanocomposite films with ultraviolet (UV) and near-infrared (NIR) blocking capabilities are reported. Such nanocomposite films, prepared by electrophoretic deposition on ITO-coated glass, are composed of indium tin oxide (ITO) nanocrystals (9 nm) and octahedral metal atom clusters (1 nm, Nb₆ or Ta₆) embedded into silica nanoparticles (∼80 nm). The functional silica nanoparticles were prepared by a reverse microemulsion process. The microstructural characterization proved that ITO nanocrystals are centered in the silica nanoparticles, whereas the metal atom clusters are homogeneously distributed in the silica matrix. The optical absorption spectra of these transparent nanocomposite films exhibit distinct and complementary contributions from their ITO nanoparticles and metal atom clusters (absorption in the UV range) and from the ITO layer on silica.