Metal clusters and nanoparticles

Controllable deposition of dispersed Pd nanoparticles on ZnO for Suzuki-Miyaura cross-coupling reactions

Palladium nanoparticles find extensive applications in catalysis in both homogeneously and heterogeneously catalyzed processes. Supporting metal nanoparticles enhances their stability as compared to their unsupported counterparts. The role of catalytic support is increasingly recognized as crucial in determining the behaviour of these materials. However, controlling the deposition and anchoring of palladium nanoparticles remains a significant challenge. This contribution discusses the preparation of straight lines of palladium particles on zinc oxide by wet impregnation. This phenomenon is attributed to the highly stepped morphology of the employed ZnO that created steric anchoring sites to stabilize the metal particles. Palladium-based catalysts were evaluated for the valuable Suzuki-Miyaura cross-coupling reaction. The dispersed Pd/ZnO catalyst achieved a conversion rate of 86% with 100% selectivity, remarkably superior to that of the Pd/Al2O3 and Pd/TiO2 counterparts.

Theoretical insights on the development of a 55-77 graphene sheet by embedding Agn=1-4 and Pdn=1-4 metal nanoclusters for efficient CO2 capture

Recent advancements in two-dimensional (2D) allotropes of carbon materials and their usage as superior CO2 adsorbents can decrease the detrimental impact of CO2 on climate change. With the use of quantum chemical calculations, the effect of metal clusters (Agn = 1-4 and Pdn = 1-4) on the structural and electrical characteristics of 55-77 2D graphene sheet is examined in the current work with an aim towards enhancing CO2 capture capacity. The findings revealed that the binding energy (Eb) of the 55-77 sheet decoration with Pdn = 1-4 metal clusters are greater owing to chemisorption by 1.17 eV, 1.69 eV, 0.27 eV, and 1.58 eV than the decoration with Agn = 1-4 clusters. Moreover, CO2 molecules adsorb on the Pdn = 1-4 cluster decorated systems having -0.35 eV, 0.83 eV, 1.53 eV, and -0.98 eV greater adsorption energies than on the Agn = 1-4 decorated 55-77 sheet due to a stronger charge transfer. Further, the findings of an atoms in molecules (AIM) study show that the interaction between CO2 and Pdn = 1-4 decorated 55-77 sheet is partially covalent and non-covalent, confirming the greater charge transfer between the CO2 molecule and Pdn = 1-4 decorated 55-77 systems. Moreover, the CO2 adsorption on Pdn = 1-4 decorated 55-77 systems is clearly demonstrated by non-covalent interaction (NCI) analysis to be a strong electrostatic interaction at sign(λ2)ρ = -0.05 a.u, and this is further supported by an electron localization function (ELF) map. The highest CO2 adsorption capacity is obtained for 55-77/Pd1+CO2 with the value of 6.27 wt % which concludes 55-77 sheet with Pdn decoration is a more suitable structure for CO2 adsorption than the Agn decorated system.

Functional-Group Effect of Ligand Molecules on the Aggregation of Gold Nanoparticles: A Molecular Dynamics Simulation Study

In this paper, atomistic molecular dynamics simulations are performed for the systems consisting of functionalized gold nanoparticles (NPs) in a toluene medium. Gold NPs are coated with ligand molecules that have different terminal groups, that is, polar carboxyl (COOH), hydroxyl (OH), amine (NH₂), and nonpolar methyl (CH₃). These functional groups are selected to understand the relation between the aggregation behavior of functionalized gold NPs in toluene and the polarity of terminal groups of ligand molecules. The center-of-mass distances between NP pairs, the radial distribution functions, the mean square displacements, the radius of gyration, and the number of hydrogen bonds (H-bond) between ligand molecules are computed. Our simulation results indicate that functionalized gold NPs exhibit different aggregation/dispersion behaviors depending upon the terminal group of ligands.

Metal carbonyl clusters of groups 8-10: synthesis and catalysis

In this review article, we discuss advances in the chemistry of metal carbonyl clusters (MCCs) spanning the last three decades, with an emphasis on the more recent reports and those involving groups 8-10 elements. Synthetic methods have advanced and been refined, leading to higher-nuclearity clusters and a wider array of structures and nuclearities. Our understanding of the electronic structure in MCCs has advanced to a point where molecular chemistry tools and other advanced tools can probe their properties at a level of detail that surpasses that possible with other nanomaterials and solid-state materials. MCCs therefore advance our understanding of structure-property-reactivity correlations in other higher-nuclearity materials. With respect to catalysis, this article focuses only on homogeneous applications, but it includes both thermally and electrochemically driven catalysis. Applications in thermally driven catalysis have found success where the reaction conditions stabilise the compounds toward loss of CO. In more recent years, MCCs, which exhibit delocalised bonding and possess many electron-withdrawing CO ligands, have emerged as very stable and effective for reductive electrocatalysis reactions since reduction often strengthens M-C(O) bonds and since room-temperature reaction conditions are sufficient for driving the electrocatalysis.

Metal Doped PVA Films for Opto-Electronics-Optical and Electronic Properties, an Overview

Polyvinyl alcohol is unique among polymers. Apart from its preparation, it is not built up in polymerization reactions from monomers, unlike most vinyl-polymers, and it is biodegradable in the presence of suitably acclimated microorganisms. It is an environmentally friendly material for a wide range of applications, from medical ones, based on its biocompatibility, to integrated optics. This paper reviews, in addition to the preparation and optimization of films of polyvinyl alcohol doped with different metal species, the role of dopants and doping technologies in the involved electronic mechanism. The optical properties were studied by UV-VIS-IR, Mössbauer spectroscopy, and other measurement techniques, with applications such as real-time holography, microlasers, optical sensors or nanophotonics in mind.

Stimuli-Responsive Materials for Tissue Engineering and Drug Delivery

Smart or stimuli-responsive materials are an emerging class of materials used for tissue engineering and drug delivery. A variety of stimuli (including temperature, pH, redox-state, light, and magnet fields) are being investigated for their potential to change a material's properties, interactions, structure, and/or dimensions. The specificity of stimuli response, and ability to respond to endogenous cues inherently present in living systems provide possibilities to develop novel tissue engineering and drug delivery strategies (for example materials composed of stimuli responsive polymers that self-assemble or undergo phase transitions or morphology transformations). Herein, smart materials as controlled drug release vehicles for tissue engineering are described, highlighting their potential for the delivery of precise quantities of drugs at specific locations and times promoting the controlled repair or remodeling of tissues.

Clustering and self-organization in small-scale natural and artificial systems

Physical properties of clusters, i.e. systems composed of a 'small' number of particles, are qualitatively different from those of infinite systems. The general approach to the problem of clustering is suggested. Clusters, as they are seen in the graphs theory, are discussed. Various physical mechanisms of clustering are reviewed. Dimensional properties of clusters are addressed. The dimensionality of clusters governs to a great extent their properties. Weakly and strongly coupled clusters are discussed. Hydrodynamic and capillary interactions giving rise to clusters formation are surveyed. Levitating droplet clusters, turbulent clusters and droplet clusters responsible for the breath-figures self-assembly are considered. Entropy factors influencing clustering are considered. Clustering in biological systems results in non-equilibrium multi-scale assembly, where at each scale, self-driven components come together by consuming energy in order to form the hierarchical structure. This article is part of the theme issue 'Bioinspired materials and surfaces for green science and technology (part 3)'.

From oxide to a new type of molecular tungsten compound: formation of bitetrahedral cluster complexes [{W6(μ4-O)2(μ3-CCN)4}(CN)16]10- and [{W6(μ4-O)2(μ3-As)4}(CN)16]10

Tungsten trioxide has been found to be a convenient precursor for the synthesis of metal cluster compounds with new types of cluster cores. The reaction between WO3 and KCN led to the formation of the cluster complex [{W6(μ4-O)2(μ3-CCN)4}(CN)16]10-. Unexpectedly, it includes the fully deprotonated form of acetonitrile, the CCN3- anion, as a μ3-bridging ligand coordinated to the trigonal faces of the bitetrahedral W6 metallocluster. A similar complex [{W6(μ4-O)2(μ3-As)4}(CN)16]10- containing μ3-As3- ligands instead of μ3-CCN3- ones has been synthesized by the reaction between WO3, As and KCN.

Role of Endocrine-Disrupting Engineered Nanomaterials in the Pathogenesis of Type 2 Diabetes Mellitus

Nanotechnology has enabled the development of innovative technologies and products for several industrial sectors. Their unique physicochemical and size-dependent properties make the engineered nanomaterials (ENMs) superior for devising solutions for various research and development sectors, which are otherwise unachievable by their bulk forms. However, the remarkable advantages mediated by ENMs and their applications have also raised concerns regarding their possible toxicological impacts on human health. The actual issue stems from the absence of systematic data on ENM exposure-mediated health hazards. In this direction, a comprehensive exploration on the health-related consequences, especially with respect to endocrine disruption-related metabolic disorders, is largely lacking. The reasons for the rapid increase in diabetes and obesity in the modern world remain largely unclear, and epidemiological studies indicate that the increased presence of endocrine disrupting chemicals (EDCs) in the environment may influence the incidence of metabolic diseases. Functional similarities, such as mimicking natural hormonal actions, have been observed between the endocrine-disrupting chemicals (EDCs) and ENMs, which supports the view that different types of NMs may be capable of altering the physiological activity of the endocrine system. Disruption of the endocrine system leads to hormonal imbalance, which may influence the development and pathogenesis of metabolic disorders, particularly type 2 diabetes mellitus (T2DM). Evidence from many in vitro, in vivo and epidemiological studies, suggests that ENMs generally exert deleterious effects on the molecular/hormonal pathways and the organ systems involved in the pathogenesis of T2DM. However, the available data from several such studies are not congruent, especially because of discrepancies in study design, and therefore need to be carefully examined before drawing meaningful inferences. In this review, we discuss the outcomes of ENM exposure in correlation with the development of T2DM. In particular, the review focuses on the following sub-topics: (1) an overview of the sources of human exposure to NMs, (2) systems involved in the uptake of ENMs into human body, (3) endocrine disrupting engineered nanomaterials (EDENMs) and mechanisms underlying the pathogenesis of T2DM, (4) evidence of the role of EDENMs in the pathogenesis of T2DM from in vitro, in vivo and epidemiological studies, and (5) conclusions and perspectives.

Molecular Nickel Phosphide Carbonyl Nanoclusters: Synthesis, Structure, and Electrochemistry of [Ni11P(CO)18]3- and [H6-nNi31P4(CO)39]n- (n = 4 and 5)

The reaction of [NEt₄]₂[Ni₆(CO)₁₂] in thf with 0.5 equiv of PCl₃ affords the monophosphide [Ni₁₁P(CO)₁₈]^3- that in turn further reacts with PCl₃ resulting in the tetra-phosphide carbonyl cluster [HNi₃₁P₄(CO)₃₉]^5-. Alternatively, the latter can be obtained from the reaction of [NEt₄]₂[Ni₆(CO)₁₂] in thf with 0.8-0.9 equiv of PCl₃. The [HNi₃₁P₄(CO)₃₉]^5- penta-anion is reversibly protonated by strong acids leading to the [H₂Ni₃₁P₄(CO)₃₉]^4- tetra-anion, whereas deprotonation affords the [Ni₃₁P₄(CO)₃₉]^6- hexa-anion. The latter is reduced with Na/naphthalene yielding the [Ni₃₁P₄(CO)₃₉]^7- hepta-anion. In order to shed light on the polyhydride nature and redox behavior of these clusters, electrochemical and spectroelectrochemical studies were carried out on [Ni₁₁P(CO)₁₈]^3-, [HNi₃₁P₄(CO)₃₉]^5-, and [H₂Ni₃₁P₄(CO)₃₉]^4-. The reversible formation of the stable [Ni₁₁P(CO)₁₈]^4- tetra-anion is demonstrated through the spectroelectrochemical investigation of [Ni₁₁P(CO)₁₈]^3-. The redox changes of [HNi₃₁P₄(CO)₃₉]^5- show features of chemical reversibility and the vibrational spectra in the ν_CO region of the nine redox states of the cluster [HNi₃₁P₄(CO)₃₉]^n- (n = 3-11) are reported. The spectroelectrochemical investigation of [H₂Ni₃₁P₄(CO)₃₉]^4- revealed the presence of three chemically reversible reduction processes, and the IR spectra of [H₂Ni₃₁P₄(CO)₃₉]^n- (n = 4-7) have been recorded. The different spectroelectrochemical behavior of [HNi₃₁P₄(CO)₃₉]^5- and [H₂Ni₃₁P₄(CO)₃₉]^4- support their formulations as polyhydrides. Unfortunately, all the attempts to directly confirm their poly hydrido nature by ¹H NMR spectroscopy failed, as previously found for related large metal carbonyl clusters. Thus, the presence and number of hydride ligands have been based on the observed protonation/deprotonation reactions and the spectroelectrochemical experiments. The molecular structures of the new clusters have been determined by single-crystal X-ray analysis. These represent the first examples of structurally characterized molecular nickel carbonyl nanoclusters containing interstitial phosphide atoms.

Palladium(0) Nanoparticle Formation, Stabilization, and Mechanistic Studies: Pd(acac)₂ as a Preferred Precursor, [Bu₄N]₂HPO₄ Stabilizer, plus the Stoichiometry, Kinetics, and Minimal, Four-Step Mechanism of the Palladium Nanoparticle Formation and Subsequent Agglomeration Reactions

Palladium(0) nanoparticles continue to be important in the field of catalysis. However, and despite the many prior reports of Pd(0)n nanoparticles, missing is a study that reports the kinetically controlled formation of Pd(0)n nanoparticles with the simple stabilizer [Bu4N]2HPO4 in an established, balanced formation reaction where the kinetics and mechanism of the nanoparticle-formation reaction are also provided. It is just such studies that are the focus of the present work. Specifically, the present studies reveal that Pd(acac)2, in the presence of 1 equiv of [Bu4N]2HPO4 as stabilizer in propylene carbonate, serves as a preferred precatalyst for the kinetically controlled nucleation following reduction under 40 ± 1 psig initial H2 pressure at 22.0 ± 0.1 °C to yield 7 ± 2 nm palladium(0) nanoparticles. Studies of the balanced stoichiometry of the Pd(0)n nanoparticle-formation reaction shows that 1.0 Pd(acac)2 consumes 1.0 equiv of H2 and produces 1.0 equiv of Pd(0)n while also releasing 2.0 ± 0.2 equiv of acetylacetone. The inexpensive, readily available HPO4(2-) also proved to be as effective a Pd(0)n nanoparticle stabilizer as the more anionic, sterically larger, "Gold Standard" stabilizer P2W15Nb3O62(9-). The kinetics and associated minimal mechanism of formation of the [Bu4N]2HPO4-stabilized Pd(0)n nanoparticles are also provided, arguably the most novel part of the present studies, specifically the four-step mechanism of nucleation (A → B, rate constant k1), autocatalytic surface growth (A + B → 2B, rate constant k2), bimolecular agglomeration (B + B → C, rate constant k3), and secondary autocatalytic surface growth (A + C → 1.5C, rate constant k4), where A is Pd(acac)2, B represents the growing, smaller Pd(0)n nanoparticles, and C represents the larger, most catalytically active Pd(0)n nanoparticles. Additional details on the mechanism and catalytic properties of the resultant Pd(0)n·HPO4(2-) nanoparticles are provided in this work.

Structural, optical and photoconductivity characteristics of pristine FeO·Fe2O3 and NTPI–FeO·Fe2O3 nanocomposite: aggregation induced emission enhancement of fluorescent organic nanoprobe of thiophene appended phenanthrimidazole derivative

In this manuscript we report the successful synthesis of pristine FeO·Fe₂O₃, 1-(naphthalen-1-yl)-2-(thiophen-2-yl)-1H-phenanthro[9,10-d]imidazole (NTPI), fluorescent organic nanoparticles (FONs) of NTPI and NTPI–FeO·Fe₂O₃ nanocomposite.

DNA assembled metal nanoclusters: synthesis to novel applications

In this review, we have discussed the emergence of promising environmental-benign DNA assembled fluorescent metal nanoclusters and their unique electronic structures, unusual physical and chemical properties.

Cluster-size dynamics: A phenomenological model for the interaction between coagulation and fragmentation processes

We present a novel phenomenological modeling approach to describe the growth of clusters as the result of the interaction between cluster coagulation and fragmentation. The cluster-size growth (CSG) model tracks the evolution of cluster-sizes rather than the concentrations of clusters with different sizes as in the Smoluchowski and Becker-Döring coagulation-fragmentation equations. Our modeling perspective allows for a description of cluster growth in realistic systems by using a significantly smaller number of differential equations to describe their dynamics. We used dynamical system tools (phase-plane analysis) and numerical simulations to investigate the CSG model dynamics and to understand how the model parameters describing the coagulation and fragmentation processes determine balances between these two processes that create non-zero stationary cluster size distributions.

Engineering noble metal nanomaterials for environmental applications

Besides being valuable assets in our daily lives, noble metals (namely, gold, silver, and platinum) also feature many intriguing physical and chemical properties when their sizes are reduced to the nano- or even subnano-scale; such assets may significantly increase the values of the noble metals as functional materials for tackling important societal issues related to human health and the environment. Among which, designing/engineering of noble metal nanomaterials (NMNs) to address challenging issues in the environment has attracted recent interest in the community. In general, the use of NMNs for environmental applications is highly dependent on the physical and chemical properties of NMNs. Such properties can be readily controlled by tailoring the attributes of NMNs, including their size, shape, composition, and surface. In this feature article, we discuss recent progress in the rational design and engineering of NMNs with particular focus on their applications in the field of environmental sensing and catalysis. The development of functional NMNs for environmental applications is highly interdisciplinary, which requires concerted efforts from the communities of materials science, chemistry, engineering, and environmental science.

Anson C, Mondal A, Powell AK, Baruah JB. Structural and magnetic properties of oxyquinolinate clusters of cobalt(ii) and manganese(ii) and serendipitous intake of carbonate during synthesis

During transformation of a Co₄ oxiquinolinate cluster to a Co₁₀ cluster, serendipitous intake of a carbonate ion was observed.

Structural rearrangements induced by acid-base reactions in metal carbonyl clusters: the case of [H(3-n)Co15Pd9C3(CO)38]n- (n = 0-3)

The new bimetallic [HCo15Pd9C3(CO)38](2-) tri-carbide carbonyl cluster has been obtained from the reaction of [H2Co20Pd16C4(CO)48](4-) with an excess of acid in CH2Cl2 solution. The mono-hydride di-anion can be reversibly protonated and deprotonated by means of acid-base reactions leading to closely related [H(3-n)Co15Pd9C3(CO)38](n-) (n = 0-3) clusters. The crystal structures of the three anionic and the neutral clusters have been determined as their H3Co15Pd9C3(CO)38·2thf, [NEt4][H2Co15Pd9C3(CO)38]·0.5C6H14, [NMe3(CH2Ph)]2[HCo15Pd9C3(CO)38]·C6H14 and [NEt4]3[Co15Pd9C3(CO)38]·thf salts. They are composed of a Pd9(μ3-CO)2 core stabilised by three Co5C(CO)12 organometallic fragments. The poly-hydride nature of these clusters has been indirectly inferred via chemical, electrochemical and magnetic measurements. Besides, cyclic voltammetry shows that the [H(3-n)Co15Pd9C3(CO)38](n-) (n = 1-3) anions are multivalent, since they undergo two or three reversible oxidations. SQUID measurements of [HCo15Pd9C3(CO)38](2-) indicate that this even electron cluster is paramagnetic with two unpaired electrons, giving further support to its hydride nature. Finally, structural studies show that the Pd9 core of [H(3-n)Co15Pd9C3(CO)38](n-) (n = 0,1) is a tri-capped octahedron, which becomes a tri-capped trigonal prism in the more charged [H(3-n)Co15Pd9C3(CO)38](n-) (n = 2,3) anions. Such a significant structural rearrangement of the metal core of a large carbonyl cluster upon protonation-deprotonation reactions is unprecedented in cluster chemistry, and suggests that interstitial hydrides may have relevant stereochemical effects even in large carbonyl clusters.

Fabrication of Meso-Porous Sintered Metal Thin Films by Selective Etching of Silica Based Sacrificial Template

Meso-porous metal materials have enhanced surface energies offering unique surface properties with potential applications in chemical catalysis, molecular sensing and selective separation. In this paper, commercial 20 nm diameter metal nano-particles, including silver and copper were blended with 7 nm silica nano-particles by shear mixing. The resulted powders were cold-sintered to form dense, hybrid thin films. The sacrificial silica template was then removed by selective etching in 12 wt% hydrofluoric acid solutions for 15 min to reveal a purely metallic meso-porous thin film material. The impact of the initial silica nano-particle diameter (7–20 nm) as well as the sintering pressure (5–20 ton·m⁻²) and etching conditions on the morphology and properties of the final nano-porous thin films were investigated by porometry, pyknometery, gas and liquid permeation and electron microscopy. Furthermore, the morphology of the pores and particle aggregation during shear mixing were assessed through cross-sectioning by focus ion beam milling. It is demonstrated that meso-pores ranging between 50 and 320 nm in average diameter and porosities up to 47% can be successfully formed for the range of materials tested.

Surface decorated platinum carbonyl clusters

Four molecular Pt-carbonyl clusters decorated by Cd-Br fragments, i.e., [Pt(13)(CO)(12){Cd(5)(μ-Br)(5)Br(2)(dmf)(3)}(2)](2-) (1), [Pt(19)(CO)(17){Cd(5)(μ-Br)(5)Br(3)(Me(2)CO)(2)}{Cd(5)(μ-Br)(5)Br(Me(2)CO)(4)}](2-) (2), [H(2)Pt(26)(CO)(20)(CdBr)(12)](8-) (3) and [H(4)Pt(26)(CO)(20)(CdBr)(12)(PtBr)(x)](6-) (4) (x = 0-2), have been obtained from the reactions between [Pt(3n)(CO)(6n)](2-) (n = 2-6) and CdBr(2)·H(2)O in dmf at 120 °C. The structures of these molecular clusters with diameters of 1.5-2 nm have been determined by X-ray crystallography. Both 1 and 2 are composed of icosahedral or bis-icosahedral Pt-CO cores decorated on the surface by Cd-Br motifs, whereas 3 and 4 display a cubic close packed Pt(26)Cd(12) metal frame decorated by CO and Br ligands. An oversimplified and unifying approach to interpret the electron count of these surface decorated platinum carbonyl clusters is suggested, and extended to other low-valent organometallic clusters and Au-thiolate nanoclusters.

Size-dependent multispectral photoacoustic response of solid and hollow gold nanoparticles

Photoacoustic (PA) imaging attracts a great deal of attention as an innovative modality for longitudinal, non-invasive, functional and molecular imaging in oncology. Gold nanoparticles (AuNPs) are identified as superior, NIR-absorbing PA contrast agents for biomedical applications. Until now, no systematic comparison of the optical extinction and PA efficiency of water-soluble AuNPs of various geometries and small sizes has been performed. Here spherical AuNPs with core diameters of 1.0, 1.4 and 11.2 nm, nanorods with longitudinal/transversal elongation of 38/9 and 44/12 nm and hollow nanospheres with outer/inner diameters of 33/19, 57/30, 68/45 and 85/56 nm were synthesized. The diode laser set-up with excitations at 650, 808, 850 and 905 nm allowed us to correlate the molar PA signal intensity with the molar extinction of the respective AuNPs. Deviations were explained by differences in heat transfer from the particle to the medium and, for larger particles, by the scattering of light. The molar PA intensity of 1.0 nm AuNPs was comparable to the commonly used organic dye methylene blue, and rapidly increased with the lateral size of AuNPs.

Depth profiling (ICP-MS) study of trace metal 'grains' in solid asphaltenes

Knowledge of trace metal 'grains' in asphaltenes could play a significant role in enhancing refining and processing of crudes and also in providing useful information on mechanistic and migratory features linked to asphaltenes. These metals originate directly from interaction of oils with source-rock, mineral matter, and formation water and their accumulation in asphaltene matrices could vary from oil well to oil well. Suitable asphaltene samples were subjected to high-performance ICP-MS laser depth profiling (213 nm) to depths of 50 μm at 5 μm intervals. The study was conducted in the absence of standardization and characteristic intensities originating from the metals of interest were measured. Ten metal profiles were investigated (Na, Mg, Al, Mn, Fe, Zn, Sr, Pb, V, and Ni). The experimental results showed non-uniform distribution of trace metals and identified areas where such metals agglomerate. The data suggested that certain chemical and physical conditions within the structure of asphaltenes are favorable for metal 'grain' formation at specific points. The exact mechanism for this behavior is not clear at this stage, and has considerable scope for future studies, including mathematical modeling simulations of asphaltenes. We also found that solid asphaltenes could be a useful forerunner of scale formation.

In situ formed "weakly ligated/labile ligand" iridium(0) nanoparticles and aggregates as catalysts for the complete hydrogenation of neat benzene at room temperature and mild pressures

"Weakly ligated/labile ligand" nanoparticles, that is nanoparticles where only weakly coordinated ligands plus the desired catalytic reactants are present, are of fundamental interest. Described herein is a catalyst system for benzene hydrogenation to cyclohexane consisting of "weakly ligated/labile ligand" Ir(0) nanoparticles and aggregates plus dry-HCl formed in situ from commercially available [(1,5-COD)IrCl](2) plus 40 +/- 1 psig (approximately 2.7 atm) H(2) at 22 +/- 0.1 degrees C. Multiple control and other experiments reveal the following points: (i) that this catalyst system is quite active with a TOF (turnover frequency) of 25 h(-1) and TTO (total turnovers) of 5250; (ii) that the BF(4)(-) and PF(6)(-) iridium salt precursors, [(1,5-COD)Ir(CH(3)CN)(2)]BF(4) and [(1,5-COD)Ir(CH(3)CN)(2)]PF(6), yield inferior catalysts; (iii) that iridium black with or without added, preformed HCl cannot achieve the TOF of 25 h(-1) of the in situ formed Ir(0)/dry-HCl catalyst. However and importantly, CS(2) poisoning experiments yield the same activity per active iridium atom for both the Ir(0)/dry-HCl and Ir black/no-HCl catalysts (12.5 h(-1) Ir(1-)), but reveal that the Ir(0)/dry-HCl system is 10-fold more dispersed compared to the Ir(0) black catalyst. The simple but important and key result is that "weakly ligated/labile ligand" Ir(0) nanoparticles and aggregates have been made in situ as demonstrated by the fact that they have identical, per exposed Ir(0) activity within experimental error to Ir(0) black and that they have no possible ligands other than those desired for the catalysis (benzene and H(2)) plus the at best poor ligand HCl. As expected, the in situ catalyst is poorly stabilized, exhibiting only 60% of its initial activity in a second run of benzene hydrogenation and resulting in bulk metal precipitation. However, stabilization of the Ir(0) nanoparticles with a ca. 2-fold higher catalytic activity and somewhat longer lifetime for the complete hydrogenation of benzene was accomplished by supporting the Ir(0) nanoparticles onto zeolite-Y (TOF of 47 h(-1) and 8600 TTO under otherwise identical conditions). Also reported is the interesting result that Cl(-) (present as Proton Sponge x H(+)Cl(-)) completely poisons benzene hydrogenation catalysis, but not the easier cyclohexene hydrogenation catalysis under otherwise the same conditions, results that suggest different active sites for these ostensibly related hydrogenation reaction. The results suggest that synthetic routes to "weakly ligated/labile ligand" nanoparticles exhibiting improved catalytic performance is an important goal worthy of additional effort.