Kinetics of thermal-assisted delayed fluorescence in blue organic emitters with large singlet-triplet energy gap

Pursuing the holy grail of thermally activated delayed fluorescence emitters: a molecular strategy for reducing the energy gap and enhancing spin-orbit coupling

The beauty and complexity of organic materials stem from the intricate interplay of their structural effects, where the same substituent can prove highly beneficial in one position yet entirely redundant in another. In this study, we demonstrate how a single halogen atom, strategically positioned, can significantly enhance the emissive properties of thermally activated delayed fluorescence (TADF) emitters. To address the inherent "low singlet-triplet energy gap (ΔE ST) equals low spin-orbit coupling (SOC)" tradeoff in donor-acceptor (DA) emitters, we propose leveraging heavy-atom substitution to achieve two simultaneous effects: (1) reducing rotational heterogeneity and thereby lowering ΔE ST at the macroscopic level due to the substituent's steric bulk, and (2) increasing SOC through the substituent's high atomic number (Z). In pursuit of efficient blue emitters, our investigation focused on DMAC-DPS derivatives with halogens positioned in the linker fragment at the ortho position to the donor. Fluorine substitution stabilized the charge-transfer state in polar media, resulting in a remarkably low activation energy of 20 meV. Bromine substitution enhanced SOC by over 20-fold in a nonpolar medium, while chlorine, striking a balance between the two, emerged as a "golden mean," offering both low activation energy and sufficiently high SOC. Molecular dynamics analysis revealed that molecular vibrations which disrupt the linker benzene ring symmetry promote excited-state mixing. The resulting hybrid nature of the T1 state, involving electron density on the halogen, is particularly important for SOC enhancement in the chlorine derivative. These findings highlight that combining a mild heavy-atom effect (HAE) with the control of selective molecular vibrations offers a promising strategy for the design of efficient blue TADF emitters. Our results provide valuable insights for advancing the development of high-performance organic light-emitting materials.

Modulation of delayed fluorescence pathways via rational molecular engineering

One of the key challenges in developing efficient organic light-emitting diodes (OLEDs) is overcoming the loss channel of triplet excitons. A common approach to mitigate these losses to enhance the external quantum efficiency of OLEDs is employing emitter molecules optimized for thermally activated delayed fluorescence (TADF) or triplet-triplet annihilation (TTA). However, achieving both in the solid state from the same organic chromophore poses a formidable challenge due to energetic and structural requirements needing to be met simultaneously. Here, we demonstrate TADF and TTA in donor-acceptor phthalimide derivatives by employing triphenylamine (TPA) or phenyl carbazole (PhCz) as a donor. Thin films of the TPA-substituted phthalimides doped in the poly(methyl methacrylate) matrix exhibit TADF emission from the singlet charge-transfer (CT) state. On the contrary, PhCz-substituted emitters display dominant TTA-induced delayed fluorescence in the neat film due to long-range molecular ordering that facilitates efficient triplet diffusion. The present study provides insight into how dual TADF-TTA delayed fluorescence can be realized in thin films of molecular semiconductors via rational molecular design.

Two-Coordinate Thermally Activated Delayed Fluorescence Coinage Metal Complexes: Molecular Design, Photophysical Characters, and Device Application

Since the emergence of the first green light emission from a fluorescent thin-film organic light emitting diode (OLED) in the mid-1980s, a global consumer market for OLED displays has flourished over the past few decades. This growth can primarily be attributed to the development of noble metal phosphorescent emitters that facilitated remarkable gains in electrical conversion efficiency, a broadened color gamut, and vibrant image quality for OLED displays. Despite these achievements, the limited abundance of noble metals in the Earth's crust has spurred ongoing efforts to discover cost-effective electroluminescent materials. One particularly promising avenue is the exploration of thermally activated delayed fluorescence (TADF), a mechanism with the potential to fully harness excitons in OLEDs. Recently, investigations have unveiled TADF in a series of two-coordinate coinage metal (Cu, Ag, and Au) complexes. These organometallic TADF materials exhibit distinctive behavior in comparison to their organic counterparts. They offer benefits such as tunable emissive colors, short TADF emission lifetimes, high luminescent quantum yields, and reasonable stability. Impressively, both vacuum-deposited and solution-processed OLEDs incorporating these materials have achieved outstanding performance. This review encompasses various facets on two-coordinate TADF coinage metal complexes, including molecular design, photophysical characterizations, elucidation of structure-property relationships, and OLED applications.

Conformational Effect of Catechol-Terephthalonitrile Emitters Leading to Ambient Violet Phosphorescence

Organic ambient violet phosphorescent (AVP) materials are of great interest due to their involvement of high energy and longer-lived triplet excitons. Here, we show three fused ring functionalized donor-acceptor-donor (D-A-D/D-A-D') emitters (BPT1-BPT3), in which two catechol-based donors (3,4-dihydroxybenzophenone, catechol, or 3,5-ditert-butylcatechol) are covalently fused to the terephthalonitrile acceptor via four O-C single bonds. Spectroscopic analysis revealed that all the molecules show AVP (∼390-394 nm, τAVP = 73-101 μs) with phosphorescence quantum yields (ϕP) of 1.8-27.4% due to low singlet-triplet gaps (0.036-0.046 eV) and conformational effects. BPT3 with bulky tert-butyl groups increases AVP (ϕP = 27.4%). Quantum chemistry calculations reveal flat (F1) and twisted (F2) conformers (ground state) with a low energy difference (∼4-5 kcal/mol) for all molecules; the F1 conformer is responsible for efficient AVP, while weak blue thermally activated delayed fluorescence with longer-lived delayed components is realized from the F2 conformer. This approach may provide important clues for the design of high-energy organic phosphorescent materials.

Observation of aligned dipoles and angular chromism of exciplexes in organic molecular heterostructures

The dipole characteristics of Frenkel excitons and charge-transfer excitons between donor and acceptor molecules in organic heterostructures such as exciplexes are important in organic photonics and optoelectronics. For the bilayer of the organic donor 4,4',4''-tris[(3-methylphenyl)phenylamino]triphenylamine and acceptor 2,4,6-tris(biphenyl-3-yl)-1,3,5-triazine molecules, the exciplexes form aligned dipoles perpendicular to the Frenkel excitons, as observed in back focal plane photoluminescence images. The angular chromism of exciplexes observed in the 100 meV range indicates possible delocalization and angle-sensing photonic applications. The blue shift of the peak position and increase in the linewidth of photoluminescene spectra with increasing excitation power are caused by the repulsive aligned exciplex dipole moments with a long lifetime (4.65 μs). Electroluminescence spectra of the exciplex from organic light-emitting diodes using the bilayer are blue-shifted with increasing bias, suggesting unidirectional alignment of the exciplex dipole moments. The observation of exciplex dipole moment alignments across molecular interfaces can facilitate the controlled coupling of exciton species and increase efficiency of organic light-emitting diodes.

Asymmetrical-Dendronized TADF Emitters for Efficient Non-doped Solution-Processed OLEDs by Eliminating Degenerate Excited States and Creating Solely Thermal Equilibrium Routes

The mechanism of thermally activated delayed fluorescence (TADF) in dendrimers is not clear. We report that fully-conjugated or fully-nonconjugated structures cause unwanted degenerate excited states due to multiple identical dendrons, which limit their TADF efficiency. We have synthesized asymmetrical "half-dendronized" and "half-dendronized-half-encapsulated" emitters. By eliminating degenerate excited states, the triplet locally excited state is ≥0.3 eV above the lowest triplet charge-transfer state, assuring a solely thermal equilibrium route for an effective spin-flip process. The isolated encapsulating tricarbazole unit can protect the TADF unit, reducing nonradiative decay and enhancing TADF performance. Non-doped solution-processed devices reach a high external quantum efficiency (EQEmax ) of 24.0 % (65.9 cd A-1 , 59.2 lm W-1 ) with CIE coordinates of (0.24, 0.45) with a low efficiency roll-off and EQEs of 23.6 % and 21.3 % at 100 and 500 cd m-2 .

Donor modification of thermally activated delayed fluorescence photosensitizers for organocatalyzed atom transfer radical polymerization

TADF donor-acceptor conjugates were applied as photosensitizers for organocatalyzed organic atom transfer radical polymerization. A donor-modification strategy was found to dramatically improve the control over the polymerization.

Thermally Activated Delayed Fluorescence Material: An Emerging Class of Metal-Free Luminophores for Biomedical Applications

The development of simple, efficient, and biocompatible organic luminescent molecules is of great significance to the clinical transformation of biomaterials. In recent years, purely organic thermally activated delayed fluorescence (TADF) materials with an extremely small single-triplet energy gap (ΔEST ) have been considered as the most promising new-generation electroluminescence emitters, which is an enormous breakthrough in organic optoelectronics. By merits of the unique photophysical properties, high structure flexibility, and reduced health risks, such metal-free TADF luminophores have attracted tremendous attention in biomedical fields, including conventional fluorescence imaging, time-resolved imaging and sensing, and photodynamic therapy. However, there is currently no systematic summary of the TADF materials for biomedical applications, which is presented in this review. Besides a brief introduction of the major developments of TADF material, the typical TADF mechanisms and fundamental principles on design strategies of TADF molecules and nanomaterials are subsequently described. Importantly, a specific emphasis is placed on the discussion of TADF materials for various biomedical applications. Finally, the authors make a forecast of the remaining challenges and future developments. This review provides insightful perspectives and clear prospects towards the rapid development of TADF materials in biomedicine, which will be highly valuable to exploit new luminescent materials.

Substituent Modulation for Highly Bright 9-Borafluorene Derivatives with Carbazole Pendant

A series of 3,6-di-tert-butyl carbazole-functionalized 9-borafluorene derivatives have been prepared with outstandingly strong photoluminescence with quantum yields up to ca. 100 and 94% for Mes*BF-pCz in solution and film, respectively. 1,3,5-Tris(trifluoromethyl)benzene (^FMes)-substituted compounds exhibit enhanced Lewis acidity with coordination to weak nucleophiles like tetrahydrofuran, resulting in a long afterglow at low temperature. The large two-photon absorption cross-section of ca. 1103 GM for Mes*BF-pCz at 800 nm in CH₂Cl₂ indicated its potential application in bioimaging.

Acridones: Strongly Emissive HIGHrISC Fluorophores

An acridone derivative (N-methyl-difluoro-acridone, NMA-dF) is characterized with respect to its utility as an emitter in organic light emitting diodes (OLEDs). Using steady-state and time-resolved spectroscopy as well as quantum chemistry, its ability to convert singlet and triplet excitons into light was scrutinized. NMA-dF emits in the deep blue range of the visible spectrum. Its fluorescence emission occurs with quantum yields close to 1 and a radiative rate constant of ≈5 × 10⁸ s^-1. So, it processes singlet excitons very efficiently. Using 1,4-dichlorobenzene as a sensitizer, it is shown that NMA-dF also converts triplet excitons into light. With the aid of quantum chemistry, this is related to a reverse intersystem crossing starting from a higher triplet state (HIGHrISC).

Conjugation-Induced Thermally Activated Delayed Fluorescence: Photophysics of a Carbazole-Benzophenone Monomer-to-Tetramer Molecular Series

Materials exhibiting thermally activated delayed fluorescence (TADF) have been extensively explored in the last decade. These emitters have great potential of being used in organic light-emitting diodes because they allow for high quantum efficiencies by utilizing triplet states via reverse intersystem crossing. In small molecules, this is done by spatially separating the highest occupied molecular orbital from the lowest unoccupied molecular orbital, forming an intramolecular charge-transfer (iCT) state and leading to a small energy difference between lowest excited singlet and triplet states (ΔE_ST). However, in polymer emitters, this is harder to achieve, and typical strategies usually include adding known TADF units as sidechains onto a polymer backbone. In a previous work, we proposed an alternative way to achieve a TADF polymer by repeating a non-TADF unit, polymerizing it via electron-donating carbazole moieties. The extended conjugation on the backbone reduced the ΔE_ST and allowed for an efficient TADF polymer. In this work, we present a more in-depth study of the shift from a non-TADF monomer to TADF oligomers. The monomer shows non-TADF emission, and we find the delayed emission to be of triplet-triplet annihilation origin. An iCT state is formed already in the dimer, leading to a much more efficient TADF emission. This is confirmed by an almost two-fold increase of photoluminescence quantum yield, a decrease in the delayed luminescence lifetime, and the respective spectral lineshapes of the molecules.

Reversibly Switchable Phase-Dependent Emission of Quinoline and Phenothiazine Derivatives towards Applications in Optical Sensing and Information Multicoding

Three new quinoline and di-tert-butyl phenothiazine isomeric derivatives were synthesized and characterized towards applications for oxygen sensing and optical information multicoding. The compounds with phenylene linker showed outstanding phase-dependent reversibility between ON/OFF states (low and high emission intensity, drastic shifting of emission colors, short- and long-lived fluorescence) in systematic grinding/fuming cycles, as required for multichannel memory devices based on optical information multicoding. The conformational diversity of the phenothiazine unit resulted in dual emission of the doped films implemented by the different luminescence mechanisms with peaks located at 414/530, 416/540, and 440/582 nm. The presence of a phenylene linker and thus two rotational degrees of freedom resulted in quenching of the delayed fluorescence of quasi-equatorial conformers in the solid state. The compound containing no phenylene bridge was characterized by two different driving photoluminescence mechanisms of the doped films: short fluorescence of the quasi-axial conformer and thermally activated delayed fluorescence of the quasi-equatorial form. This compound showed oxygen sensitivity with a Stern-Volmer constant of 7.5×10^-4  ppm^-1 .

Dissociative nature of C(sp2)-N(sp3) bonds of carbazole based materials via conical intersection: simple method to predict the exciton stability of host materials for blue OLEDs: a computational study

In this work, the origin of the singlet and triplet exciton-induced degradation of host materials with C(sp2)-N(sp3) bonds around nitrogen (carbazoles, acridines, etc.), connecting donor and acceptor units, was unravelled using DFT and CASSCF methods. The results reveal that molecules (employed in OLEDs) with basic units containing C(sp2)-N(sp3) bonds (nitrogen connected to carbon in a triangular fashion) have a natural tendency to fragment at the C-N bond through an S1/S0 conical intersection (CI). The calculation of barrier heights, to reach a dissociation point, indicates that degradation via triplet states is kinetically less feasible (ΔGT1-TS* > 25 kcal mol-1) compared to that via the first singlet excited state (ΔGS1-TS* ∼7-30 kcal mol-1). However, the long lifetime of triplets (as compared to singlets) aids in the reverse intersystem crossing from triplet to singlet state for subsequent degradation. From the results and inference, ΔGS1-TS* and ΔES1-T1 are proposed to be the controlling factors for exciton-induced degradation of host materials with C(sp2)-N(sp3) bonds. Furthermore, multiple functionalization of carbazole moieties reveals that polycyclic aromatic systems employed as acceptor units of host materials are best suited for PhOLEDs as they will increase their lifetime due to the larger ΔGS1-TS* and ΔES1-T1. For TADF-based devices, materials with fused ring systems (with N(sp3) at the centre) in the donor unit are the most recommended ones based on the findings of this work, as they avoid the dissociative channel altogether. A negative linear correlation between ΔGS1-TS* and HOMO-LUMO gap is observed, which provides an indirect way to predict the kinetic stability of these materials in excitonic states. These initial results are promising for the future development of the QSAR-type approach for the smart design of host materials for long-life blue OLEDs.

Stimuli-Responsive Thermally Activated Delayed Fluorescence in Polymer Nanoparticles and Thin Films: Applications in Chemical Sensing and Imaging

Though molecules exhibiting thermally activated delayed fluorescence (TADF) have seen extensive development in organic light-emitting diodes, their incorporation into polymer nanomaterials and thin films has led to a range of applications in sensing and imaging probes. Triplet quenching can be used to probe oxygen concentration, and the reverse intersystem crossing mechanism which gives rise to TADF can also be used to measure temperature. Moreover, the long emission lifetimes of TADF materials allows for noise reduction in time-gated microscopy, making these compounds ideal for time-resolved fluorescence imaging (TRFI). A polymer matrix enables control over energy transfer between molecules, and can be used to modulate TADF behavior, solubility, biocompatibility, or desirable mechanical properties. Additionally, a polymer's oxygen permeability can be tuned to suit imaging applications in a range of media. Here we review the applications of polymer nanoparticles and films exhibiting TADF in sensing and imaging, demonstrating that this class of materials has great potential beyond electroluminescent devices still waiting to be explored.

Understanding and Designing Thermally Activated Delayed Fluorescence Emitters: Beyond the Energy Gap Approximation

In this article recent progress in the development of molecules exhibiting Thermally Activated Delayed Fluorescence (TADF) is discussed with a particular focus upon their application as emitters in highly efficient organic light emitting diodes (OLEDs). The key aspects controlling the desirable functional properties, e. g. fast intersystem crossing, high radiative rate and unity quantum yield, are introduced with a particular focus upon the competition between the key requirements needed to achieve high performance OLEDs. The design rules required for organic and metal organic materials are discussed, and the correlation between them outlined. Recent progress towards understanding the influence of the interaction between a molecule and its environment are explained as is the role of the mechanism for excited state formation in OLEDs. Finally, all of these aspects are combined to discuss the ability to implement high level design rules for achieving higher quality materials for commercial applications. This article highlights the significant progress that has been made in recent years, but also outlines the significant challenges which persist to achieve a full understanding of the TADF mechanism and improve the stability and performance of these materials.

Blue TADF Emitters Based on Indenocarbazole Derivatives with High Photoluminescence and Electroluminescence Efficiencies

A series of blue thermally activated delayed fluorescence (TADF) emitters were designed and synthesized using 2,4,6-triphenyl-1,3,5-triazine as the acceptor unit and indenocarbazole derivatives as the electron-donating moiety. In contrast with other six-membered heterocycles, like phenothiazine, phenoxazine, and dihydroacridine, where the TADF efficiency is affected by the presence of different conformers, indenocarbazole derivatives do not show this effect. Therefore, InCz23FlTz, InCz23DPhTz, InCz23DMeTz, and InCz34DPhTz allow the investigation of the effect of different substituents and substitution positions on TADF properties, without the influence of different conformations. We have demonstrated that the substituted position on the carbazole and different substituents in the same position have clear influence on the donor character of indenocarbazole derivatives. Also, the color purity of blue emission and excited states could be adjusted by substituents and substituted position, and thus excellent blue emitters can be obtained. Besides, the four compounds show relatively small TADF contribution under optical excitation; however, excellent performances are obtained in the electroluminescent devices, especially with InCz34DPhTz, which shows a maximum external quantum efficiency of around 26%. In the end, we find an effective way to design high-efficiency blue TADF materials and deeply study the relation between the structure and property in indenocarbazole derivatives.

Triazatruxene: A Rigid Central Donor Unit for a D-A3 Thermally Activated Delayed Fluorescence Material Exhibiting Sub-Microsecond Reverse Intersystem Crossing and Unity Quantum Yield via Multiple Singlet-Triplet State Pairs

By inverting the common structural motif of thermally activated delayed fluorescence materials to a rigid donor core and multiple peripheral acceptors, reverse intersystem crossing (rISC) rates are demonstrated in an organic material that enables utilization of triplet excited states at faster rates than Ir-based phosphorescent materials. A combination of the inverted structure and multiple donor-acceptor interactions yields up to 30 vibronically coupled singlet and triplet states within 0.2 eV that are involved in rISC. This gives a significant enhancement to the rISC rate, leading to delayed fluorescence decay times as low as 103.9 ns. This new material also has an emission quantum yield ≈1 and a very small singlet-triplet gap. This work shows that it is possible to achieve both high photoluminescence quantum yield and fast rISC in the same molecule. Green organic light-emitting diode devices with external quantum efficiency >30% are demonstrated at 76 cd m-2.

The theory of thermally activated delayed fluorescence for organic light emitting diodes

The recent progress in the theory of organic molecules exhibiting thermally activated delayed fluorescence (TADF) is discussed with a particular focus upon their application in highly efficient purely organic light emitting diodes (OLEDs).

Thermally Activated Delayed Fluorescence in CuI Complexes Originating from Restricted Molecular Vibrations

The mechanism of thermally activated delayed fluorescence (TADF) in molecules in aggregated or condensed solid states has been rarely studied and is not well understood. Nevertheless, many applications of TADF emitters are strongly affected by their luminescence properties in the aggregated state. In this study, two new isomeric tetradentate Cu^I complexes which simultaneously show aggregation induced emission (AIE) and TADF characteristics are reported for the first time. We provide direct evidence that effectively restricting the vibrations of individual molecules is a key requisite for TADF in these two Cu^I complexes through in‐depth photophysical measurements combined with kinetic methods, single crystal analysis and theoretical calculations. These findings should stimulate new molecular engineering endeavours in the design of AIE–TADF active materials with highly emissive aggregated states.

Using Guest-Host Interactions To Optimize the Efficiency of TADF OLEDs

We show that the emitter and host combination must be optimized to minimize the reverse intersystem crossing (rISC) barrier and maximize thermally activated delayed fluorescence (TADF). The blue TADF emitter, 2,7-bis(9,9-dimethyl-acridin-10-yl)-9,9-dimethylthioxanthene-S,S-dioxide (DDMA-TXO2), has strong TADF character due to efficient charge transfer (CT) state formation. By combining DDMA-TXO2 with a host of correct polarity (DPEPO) that relaxes the CT manifolds' energy to become resonant with the lowest-energy local triplet state of DDMA-TXO2, the emitter and host combination produce a minimum rISC barrier (ΔEST), which maximizes TADF efficiency. We show that the sensitivity of these splittings is highly dependent on emitter environment and must be carefully tuned to optimize device performance. Devices utilizing DDMA-TXO2 in the DPEPO host show blue electroluminescence (EL), with commission internationale de l'éclairage (CIE) chromaticity coordinates of CIE (0.16, 0.24), with a maximum external quantum efficiency of 22.4%. This high device performance is a direct consequence of optimizing the TADF efficiency by this "host tuning".

The Importance of Vibronic Coupling for Efficient Reverse Intersystem Crossing in Thermally Activated Delayed Fluorescence Molecules

Factors influencing the rate of reverse intersystem crossing (k_rISC ) in thermally activated delayed fluorescence (TADF) emitters are critical for improving the efficiency and performance of third-generation heavy-metal-free organic light-emitting diodes (OLEDs). However, present understanding of the TADF mechanism does not extend far beyond a thermal equilibrium between the lowest singlet and triplet states and consequently research has focused almost exclusively on the energy gap between these two states. Herein, we use a model spin-vibronic Hamiltonian to reveal the crucial role of non-Born-Oppenheimer effects in determining k_rISC . We demonstrate that vibronic (nonadiabatic) coupling between the lowest local excitation triplet (³ LE) and lowest charge transfer triplet (³ CT) opens the possibility for significant second-order coupling effects and increases k_rISC by about four orders of magnitude. Crucially, these simulations reveal the dynamical mechanism for highly efficient TADF and opens design routes that go beyond the Born-Oppenheimer approximation for the future development of high-performing systems.