Entanglement effects in capillary waves on liquid polymer films

Viscosity and fragility of confined polymer nanocomposites: a tale of two interfaces

Viscosity and fragility are key parameters determining the processability and thermo-mechanical stability of glassy polymers and polymer nanocomposites (PNCs). In confined polymers, these parameters are largely dominated by the long relaxation times of the polymers adsorbed at the substrate-polymer interface. On the other hand, for polymer nanocomposites, the interface layer (IL) between the nanoparticles and the surrounding matrix chains often control not only the morphology and dispersion but also various parameters like viscosity and glass transition temperature. Confined PNCs, hence, present a unique opportunity to study the interplay of these two independent interfacial effects. Here, we report the results of X-ray scattering based dynamics measurements of PNC thin films, with a two IL width, unraveling the subtle interplay of these two interfaces on the measured viscosity and fragility. Coupled with coarse-grained molecular dynamics (MD) simulations, our experimental results demonstrate that the viscosity of the PNC films increases with both the IL width and the thickness of the polymer layer adsorbed at the substrate interface. However, while both pristine PS and PNCs with a higher IL width become stronger glasses, as estimated by their fragility, the PNC with a lower IL width shows an increase in fragility with increasing confinement. Our results suggest a novel method to control thermo-mechanical properties and stability of PNC coatings by independently controlling the two interfacial effects in athermal glassy PNCs.

Free Surface Relaxations of Star-Shaped Polymer Films

The surface relaxation dynamics of supported star-shaped polymer thin films are shown to be slower than the bulk, persisting up to temperatures at least 50 K above the bulk glass transition temperature T_{g}^{bulk}. This behavior, exhibited by star-shaped polystyrenes with functionality f=8 arms and molecular weights per arm M_{arm} Collapse

Key Words Collapse

MESH Headings Collapse

Grants

• 9999-NIST Intramural NIST DOC

Collapse

Affiliation(s)

Emmanouil Glynos Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas, P.O. Box 1385, 711 10 Heraklion, Crete, Greece
Kyle J. Johnson Department of Material Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109, USA Biointeraces Institute, University of Michigan, Ann Arbor, Michigan 48109, USA
Bradley Frieberg Biointeraces Institute, University of Michigan, Ann Arbor, Michigan 48109, USA Macromolecular Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109, USA
Alexandros Chremos Materials Science and Engineering Division, National Institute of Standards and Technology, Gaithersburg, MD, 20899, USA
Suresh Narayanan Department of Chemistry, National and Kapodistrian University of Athens, Panepistimiopolis, Zografou, 15771, Athens Greece
Georgios Sakellariou National Renewable Energy Laboratory (NREL), Golden, Colorado 80401, USA
Peter F. Green Department of Material Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109, USA Biointeraces Institute, University of Michigan, Ann Arbor, Michigan 48109, USA Macromolecular Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109, USA National Renewable Energy Laboratory (NREL), Golden, Colorado 80401, USA

Collapse

Altering surface fluctuations by blending tethered and untethered chains

"Partially tethering" a thin film of a polymer melt by covalently attaching to the substrate a fraction of the chains in an unentangled melt dramatically increases the relaxation time of the surface height fluctuations. This phenomenon is observed even when the film thickness, h, is 20 times the unperturbed chain radius, R_g,tethered, of the tethered chains, indicating that partial tethering is more influential than any physical attraction with the substrate. Furthermore, a partially tethered layer of a low average molecular weight of 5k showed much slower surface fluctuations than did a reference layer of pure untethered chains of much greater molecular weight (48k), so the partial tethering effect is stronger than the effects of entanglement and increase in glass transition temperature, T_g, with molecular weight. Partial tethering offers a means of tailoring these fluctuations which influence wetting, adhesion, and tribology of the surface.

Modifying Surface Fluctuations of Polymer Melt Films with Substrate Modification

Deposition of a plasma polymerized film on a silicon substrate substantially changes the fluctuations on the surface of a sufficiently thin melt polystyrene (PS) film atop the substrate. Surface fluctuation relaxation times measured with X-ray photon correlation spectroscopy (XPCS) for ca. 4R_g thick melt films of 131 kg/mol linear PS on hydrogen-passivated silicon (H-Si) and on a plasma polymer modified silicon wafer can both be described using a hydrodynamic continuum theory (HCT) that assumes the film is characterized throughout its depth by the bulk viscosity. However, when the film thickness is reduced to ∼3R_g, confinement effects are evident. The surface fluctuations are slower than predicted using the HCT, and the confinement effect for the PS on H-Si is larger than that for the PS on the plasma polymerized film. This deviation is due to a difference in the thicknesses of the strongly adsorbed layers at the substrate which are impacted by the substrate surface energy.

Confinement Effects with Molten Thin Cyclic Polystyrene Films

The surface fluctuations of a melt film of a low molecular weight cyclic polystyrene (CPS) manifest confinement effects for a film thickness (14R_g) much larger than that for which a melt film of the linear chain analog manifests confinement. This is true both in terms of absolute thickness and thickness relative to chain size, R_g. In fact, the linear analog polymer does not manifest confinement effects even at a thickness of 7R_g. Both types of films have a strongly adsorbed layer at the substrate that plays a role in slowing the surface fluctuations for the thinnest films. This layer is 70% thicker for the cyclic chains than for the linear chains. At the interface with the substrate the packing of the cyclic chains is perturbed much more strongly than is the packing of the linear chains.

Effect of tethering on the surface dynamics of a thin polymer melt layer

The surface height fluctuations of a layer of low molecular weight (2.2k) untethered perdeuterated polystyrene (dPS) chains adjacent to a densely grafted polystyrene brush are slowed dramatically. Due to the interpenetration of the brush with the layer of "untethered chains" a hydrodynamic continuum theory can only describe the fluctuations when the effective thickness of the film is taken to be that which remains above the swollen brush. The portion of the film of initially untethered chains that interpenetrates with the brush becomes so viscous as to effectively play the role of a rigid substrate. Since these hybrid samples containing a covalently tethered layer at the bottom do not readily dewet, and are more robust than thin layers of untethered short chains on rigid substrates, they provide a route for tailoring polymer layer surface properties such as wetting, adhesion and friction.

X-ray photon correlation spectroscopy studies of surfaces and thin films

The technique of X-ray Photon Correlation Spectroscopy (XPCS) is reviewed as a method for studying the relatively slow dynamics of materials on time scales ranging from microseconds to thousands of seconds and length scales ranging from microns down to nanometers. We focus on the application of this technique to study dynamical fluctuations of surfaces, interfaces and thin films. We first discuss instrumental issues such as the effects of partial coherence (or alternatively finite instrumental resolution) and optimization of signal-to-noise ratios in the experiments. We then review what has been learned from recent XPCS studies of capillary wave fluctuations on liquid surfaces and polymer films, of nanoparticles used as probes to study the interior dynamics of polymer films, of liquid crystals and multilamellar surfactant films, and of metal surfaces, and magnetic domain wall fluctuations in antiferromagnets. We then discuss studies of non-equilibrium dynamics described by 2-time correlation functions. Finally, we briefly speculate on possible future XPCS experiments at new synchrotron sources currently under development including studies of dynamics on time scales down to femtoseconds.

Demonstration of feasibility of X-ray free electron laser studies of dynamics of nanoparticles in entangled polymer melts

The recent advent of hard x-ray free electron lasers (XFELs) opens new areas of science due to their exceptional brightness, coherence, and time structure. In principle, such sources enable studies of dynamics of condensed matter systems over times ranging from femtoseconds to seconds. However, the studies of "slow" dynamics in polymeric materials still remain in question due to the characteristics of the XFEL beam and concerns about sample damage. Here we demonstrate the feasibility of measuring the relaxation dynamics of gold nanoparticles suspended in polymer melts using X-ray photon correlation spectroscopy (XPCS), while also monitoring eventual X-ray induced damage. In spite of inherently large pulse-to-pulse intensity and position variations of the XFEL beam, measurements can be realized at slow time scales. The X-ray induced damage and heating are less than initially expected for soft matter materials.

Structure and dynamics studies of concentrated micrometer-sized colloidal suspensions

We present an experimental study of the structural and dynamical properties of concentrated suspensions of different sized polystyrene microspheres dispersed in glycerol for volume fraction concentrations between 10% and 20%. The static structure, probed with ultrasmall-angle X-ray scattering, shows a behavior very similar to that of hard spheres. The equilibrium dynamics is probed with ultrasmall-angle X-ray scattering-X-ray photon correlation spectroscopy, a new technique that overcomes the limits of visible light-scattering techniques imposed by multiple scattering and is suitable for studies of optically opaque materials containing micrometer-sized structures. We found that the intensity autocorrelation functions are better described by a stretched exponential function and microspheres in a concentrated suspension move collectively. We also found that the inverse of the effective diffusion coefficients displays a peak with respect to the scattering vector that resembles the peaks in the static structure factors, which indicates that a long-lived, low free-energy state exists. The relaxation time is approximately inversely related to scattering vector, a behavior consistent with models that describe the dynamics in terms of random, local structural arrangements in disordered media.

Modulus, confinement, and temperature effects on surface capillary wave dynamics in bilayer polymer films near the glass transition

We report relaxation times (τ) for surface capillary waves on 27-127 nm polystyrene (PS) top layers in bilayer films using x-ray photon correlation spectroscopy. At ∼10 °C above the PS glass transition temperature (T(g)), τ tracks with underlayer modulus, being significantly smaller on softer substrates at low in-plane scattering wave vector. Relative to capillary wave theory, we also report stiffening behavior upon nanoconfinement of the PS layers. At PS T(g)+40 °C, both effects become negligible. We demonstrate how neighboring polymer domains impact dynamics over substantial length scales.