Structural transformations and anomalous viscosity in the B2O3 melt under high pressure

Metainterface Heterostructure Enhances Sonodynamic Therapy for Disrupting Secondary Biofilms

Implant-related secondary infections are a challenging clinical problem. Sonodynamic therapy (SDT) strategies are promising for secondary biofilm infections by nonsurgical therapy. However, the inefficiency of SDT in existing acoustic sensitization systems limits its application. Therefore, we take inspiration from popular metamaterials and propose the design idea of a metainterface heterostructure to improve SDT efficiency. The metainterfacial heterostructure is defined as a periodic arrangement of heterointerface monoclonal cells that amplify the intrinsic properties of the heterointerface. Herein, we develop a TiO2/Ti2O3/vertical graphene metainterface heterostructure film on titanium implants. This metainterface heterostructure exhibits extraordinary sonodynamic and acoustic-to-thermal conversion effects under low-intensity ultrasound. The modulation mechanisms of the metainterface for electron accumulation and separation are revealed. The synergistic sonodynamic/mild sonothermal therapy disrupts biofilm infections (antibacterial rates: 99.99% for Staphylococcus aureus, 99.54% for Escherichia coli), and the osseointegration ability of implants is significantly improved in in vivo tests. Such a metainterface heterostructure film lays the foundation for the metainterface of manipulating electron transport to enhance the catalytic performance and holding promise for addressing secondary biofilm infections.

In situ characterization of liquids at high pressure combining X-ray tomography, X-ray diffraction and X-ray absorption using the white beam station at PSICHÉ

A novel experimental setup dedicated to the study of liquid and amorphous materials, on the white beam station of the PSICHÉ beamline at SOLEIL, is described. The Beer-Lambert absorption method has been developed using a broad-spectrum (white) incident beam for in situ density measurements at extreme conditions of pressure and temperature. This technique has been combined with other existing X-ray techniques (radiographic imaging, tomography and combined angle energy dispersive X-ray diffraction). Such a multi-technical approach offers new possibilities for the characterization of liquid and amorphous materials at high pressure and high temperature. The strength of this approach is illustrated by density measurements of liquid gallium at pressures up to 4 GPa, combining the three independent X-ray techniques (the Beer-Lambert absorption method, tomography and X-ray diffraction).

Mechanisms of Pressure-Induced Structural Transformation in Confined Sodium Borate Glasses

In this paper, density functional theory simulations were conducted to investigate the structural adaptation of sodium borates xNa₂O·(100-x)B₂O₃ (x = 25, 33, 50, and 60 mol %) during the compression/decompression between 0 and 10 GPa. The sodium borates are confined between two Fe₂O₃ substrates and undergo the compression by reducing the gap between the two surfaces. The results reveal the borate response to the load through a two-stage transformation: rearrangement at low pressure and polymerization at high pressure. The pressure required to initiate the polymerization depends directly on the portion of fourfold-coordinated (^[4]B) boron in the sodium borates. We found that the polymerization occurs through three different mechanisms to form BO₄ tetrahedra with surface oxygen and nonbridging and bridging oxygen. The electronic structure was analyzed to understand the nature of these mechanisms. The conversions from BO₃ to BO₄ are mostly irreversible as a large number of newly formed BO₄ remain unchanged under the decompression. In addition, the formation of a sodium-rich layer can be observed when the systems were compressed to high pressure. Our simulation provides insight into sodium borate glass responses to extreme condition and the underlying electronic mechanisms that can account for these behaviors.

Many-body effects at the origin of structural transitions in B2O3

The structural properties of glassy diboron trioxide, g-B₂O₃, are investigated from ambient to high pressure conditions using two types of atomic force-field models that account for many-body effects. These models are parameterized by a dipole- and force-fitting procedure of reference datasets created via first-principles calculations on a series of configurations. The predictions of the models are tested against experimental data, where particular attention is paid to the structural transitions in g-B₂O₃ that involve changes to both the short- and medium-range order. The models outperform those previously devised, where improvement originates from the incorporation of two key physical ingredients, namely, (i) the polarizability of the oxide ion and (ii) the ability of an oxide ion to change both size and shape in response to its coordination environment. The results highlight the importance of many-body effects for accurately modeling this challenging system.

Response of complex networks to compression: Ca, La, and Y aluminoborosilicate glasses formed from liquids at 1 to 3 GPa pressures

Aluminoborosilicate glasses containing relatively high field strength modifiers (Ca, La, and Y) have been compressed at pressures up to 3 GPa and near the glass transition temperature (Tg) and quenched to room temperature at high pressure followed by decompression. Structural changes were quantified with high-resolution (27)Al and (11)B MAS nuclear magnetic resonance at 14.1-18.8 T. The changes with pressure in Al and B coordinations in the recovered samples are quite large with more than 50% decreases in tetrahedral aluminum ((IV)Al) and 200%-300% increases in tetrahedral boron ((IV)B). Glasses with higher field strength modifiers (La and Y) contain more high coordinated aluminum ((V,V I)Al) at all pressures studied. More high coordinated boron also correlates with higher field strength modifier if all three compositions are compared on an isothermal basis. Although lowering fictive temperature and increasing pressure both increase Al and B coordinations, our study shows that the actual mechanisms for structural changes are most probably different for temperature and pressure effects. Using a rough thermodynamic model to extrapolate to higher pressures, it appears that a simple non-bridging oxygen (NBO) consumption mechanism is not sufficient to convert all the aluminum to octahedral and boron to tetrahedral coordination, suggesting other mechanisms for structural changes could occur at high pressure as NBO becomes depleted.

Volume and structural relaxation in compressed sodium borate glass

Packing of structural units rather than conversions between them is the main mechanism for pressure-induced densification in sodium borate glass.

Collective modes and thermodynamics of the liquid state

Strongly interacting, dynamically disordered and with no small parameter, liquids took a theoretical status between gases and solids with the historical tradition of hydrodynamic description as the starting point. We review different approaches to liquids as well as recent experimental and theoretical work, and propose that liquids do not need classifying in terms of their proximity to gases and solids or any categorizing for that matter. Instead, they are a unique system in their own class with a notably mixed dynamical state in contrast to pure dynamical states of solids and gases. We start with explaining how the first-principles approach to liquids is an intractable, exponentially complex problem of coupled non-linear oscillators with bifurcations. This is followed by a reduction of the problem based on liquid relaxation time τ representing non-perturbative treatment of strong interactions. On the basis of τ, solid-like high-frequency modes are predicted and we review related recent experiments. We demonstrate how the propagation of these modes can be derived by generalizing either hydrodynamic or elasticity equations. We comment on the historical trend to approach liquids using hydrodynamics and compare it to an alternative solid-like approach. We subsequently discuss how collective modes evolve with temperature and how this evolution affects liquid energy and heat capacity as well as other properties such as fast sound. Here, our emphasis is on understanding experimental data in real, rather than model, liquids. Highlighting the dominant role of solid-like high-frequency modes for liquid energy and heat capacity, we review a wide range of liquids: subcritical low-viscous liquids, supercritical state with two different dynamical and thermodynamic regimes separated by the Frenkel line, highly-viscous liquids in the glass transformation range and liquid-glass transition. We subsequently discuss the fairly recent area of liquid-liquid phase transitions, the area where the solid-like properties of liquids have become further apparent. We then discuss gas-like and solid-like approaches to quantum liquids and theoretical issues that are similar to the classical case. Finally, we summarize the emergent view of liquids as a unique system with a mixed dynamical state, and list several areas where interesting insights may appear and continue the extraordinary liquid story.

Networks under pressure: the development of in situ high-pressure neutron diffraction for glassy and liquid materials

The pressure-driven collapse in the structure of network-forming materials will be considered in the gigapascal (GPa) regime, where the development of in situ high-pressure neutron diffraction has enabled this technique to obtain new structural information. The improvements to the neutron diffraction methodology are discussed, and the complementary nature of the results is illustrated by considering the pressure-driven structural transformations for several key network-forming materials that have also been investigated by using other experimental techniques such as x-ray diffraction, inelastic x-ray scattering, x-ray absorption spectroscopy and Raman spectroscopy. A starting point is provided by the pressure-driven network collapse of the prototypical network-forming oxide glasses B2O3, SiO2 and GeO2. Here, the combined results help to show that the coordination number of network-forming structural motifs in a wide range of glassy and liquid oxide materials can be rationalised in terms of the oxygen-packing fraction over an extensive pressure and temperature range. The pressure-driven network collapse of the prototypical chalcogenide glass GeSe2 is also considered where, as for the case of glassy GeO2, site-specific structural information is now available from the method of in situ high-pressure neutron diffraction with isotope substitution. The application of in situ high-pressure neutron diffraction to other structurally disordered network-forming materials is also summarised. In all of this work a key theme concerns the rich diversity in the mechanisms of network collapse, which drive the changes in physico-chemical properties of these materials. A more complete picture of the mechanisms is provided by molecular dynamics simulations using theoretical schemes that give a good account of the experimental results.

Temperature-dependent densification of sodium borosilicate glass

We provide a comprehensive understanding of the temperature-dependent changes in the network topology, structure, and properties of densified borosilicate glass.

Ultralow viscosity of carbonate melts at high pressures

Knowledge of the occurrence and mobility of carbonate-rich melts in the Earth's mantle is important for understanding the deep carbon cycle and related geochemical and geophysical processes. However, our understanding of the mobility of carbonate-rich melts remains poor. Here we report viscosities of carbonate melts up to 6.2 GPa using a newly developed technique of ultrafast synchrotron X-ray imaging. These carbonate melts display ultralow viscosities, much lower than previously thought, in the range of 0.006-0.010 Pa s, which are ~2 to 3 orders of magnitude lower than those of basaltic melts in the upper mantle. As a result, the mobility of carbonate melts (defined as the ratio of melt-solid density contrast to melt viscosity) is ~2 to 3 orders of magnitude higher than that of basaltic melts. Such high mobility has significant influence on several magmatic processes, such as fast melt migration and effective melt extraction beneath mid-ocean ridges.

Irreversibility of pressure induced boron speciation change in glass

It is known that the coordination number (CN) of atoms or ions in many materials increases through application of sufficiently high pressure. This also applies to glassy materials. In boron-containing glasses, trigonal BO3 units can be transformed into tetrahedral BO4 under pressure. However, one of the key questions is whether the pressure-quenched CN change in glass is reversible upon annealing below the ambient glass transition temperature (Tg). Here we address this issue by performing (11)B NMR measurements on a soda lime borate glass that has been pressure-quenched at ~0.6 GPa near Tg. The results show a remarkable phenomenon, i.e., upon annealing at 0.9Tg the pressure-induced change in CN remains unchanged, while the pressurised values of macroscopic properties such as density, refractive index, and hardness are relaxing. This suggests that the pressure-induced changes in macroscopic properties of soda lime borate glasses compressed up to ~0.6 GPa are not attributed to changes in the short-range order in the glass, but rather to changes in overall atomic packing density and medium-range structures.

Influence of packing on low energy vibrations of densified glasses

A comparative study of Raman scattering and low temperature specific heat capacity has been performed on samples of B2O3, which have been high-pressure quenched to go through different glassy phases having growing density to the crystalline state. It has revealed that the excess volume characterizing the glassy networks favors the formation of specific glassy structural units, the boroxol rings, which produce the boson peak, a broad band of low energy vibrational states. The decrease of boroxol rings with increasing pressure of synthesis is associated with the progressive depression of the excess low energy vibrations until their full disappearance in the crystalline phase, where the rings are missing. These observations prove that the additional soft vibrations in glasses arise from specific units whose formation is made possible by the poor atomic packing of the network.

First-order liquid-liquid phase transition in cerium

We report the first experimental observation of a liquid-liquid phase transition in the monatomic liquid metal cerium, by means of in situ high-pressure high-temperature x-ray diffraction experiments. At 13 GPa, upon increasing temperature from 1550 to 1900 K high-density liquid transforms to a low-density liquid, with a density difference of 14%. Theoretic models based on ab initio calculations are built to investigate the observed phase behavior of the liquids at various pressures. The results suggest that the transition primarily originates from the delocalization of f electrons and is deemed to be of the first order that terminates at a critical point.

Development of a method for measuring the density of liquid sulfur at high pressures using the falling-sphere technique

We describe a new method for the in situ measurement of the density of a liquid at high pressure and high temperature using the falling-sphere technique. Combining synchrotron radiation X-ray radiography with a large-volume press, the newly developed falling-sphere method enables the determination of the density of a liquid at high pressure and high temperature based on Stokes' flow law. We applied this method to liquid sulfur and successfully obtained the density at pressures up to 9 GPa. Our method could be used for the determination of the densities of other liquid materials at higher static pressures than are currently possible.

Effect of pressure on structure of oxide glasses at high pressure: Insights from solid-state NMR of quadrupolar nuclides

Revealing the structure of oxide glasses at high pressure remains a fundamental yet difficult problem in modern physical and chemical sciences. The recent advances in solid-state NMR techniques used for quadrupolar nuclides offer a considerably improved resolution of atomic sites, unveiling previously unknown structural details of oxides glasses at high pressure. Here, we present an overview of the recent progress and insights by high-resolution multi-nuclear triple quantum magic angle spinning (3QMAS) NMR into pressure-induced changes in coordination number, connectivity, and topological disorder in oxide glasses quenched from melts at high pressure. (11)B and (27)Al 3QMAS NMR studies of oxide glasses show that the formation of highly coordinated Al (([5,6])Al) and four coordinated ([4])B are prevalent at high pressure up to 8 GPa. The formation of oxygen clusters linking these highly coordinated framework units and Si (e.g., ([5,6])Al-O-([4])Si, ([5,6])Si-O-([4])Si, and Na-O-([5,6])Si) is observed in the (17)O NMR spectra at higher pressure, leading to an overall increase in the degree of polymerization with pressure. (23)Na MAS NMR spectra of diverse oxide glasses at high pressure and high magnetic field also indicate that the Na-O bond distance may decrease with pressure. Pressure-induced changes in structurally relevant NMR parameters such as the (17)O quadrupolar coupling product (P(q)) for the Si-O-Si cluster and (27)Al P(q) for Al sites in oxide glasses indicate the occurrence of pressure-induced reductions in the Si-O-Si angle and an increase in the Al-O bond length distribution with pressure, indicating an increase in the overall topological disorder in oxide glasses with pressure. All the pressure-induced changes in structure and topology are characterized by strong composition dependence. These experimental results highlight a new opportunity to investigate the molecular structures of silicate melts at high pressure and reveal connections between the microscopic signatures of anomalous and non-linear changes in the macroscopic properties of the corresponding liquids. While many challenges still remain in the synthesis of oxide glasses with wider range of melt composition at higher pressure above 12 GPa, recent progress in enhancement of sensitivity and resolution in the solid state NMR hold strong promise for study exploring additional details of connectivity among quadrupolar nuclides and medium-range order of the more complex, multi-components glasses at high pressure.