Tetrahedral colloidal clusters from random parking of bidisperse spheres

Anomalous Restabilization of Colloid-Polymer Mixture with Increasing Colloid Concentration

Polymers are often used to modulate interactions and, consequently, the stability of colloids, which depends on a range of parameters such as concentration, the nature of the polymer (adsorbing/nonadsorbing, molecular weight, charged/neutral, etc.), temperature, and so on, as has been well studied before. However, the effect of colloid concentration on the stability of colloid-polymer mixtures at high polymer concentrations has been little addressed. In this work, we studied the stability of colloidal silica (CS)-poly(vinyl alcohol) (PVA) mixtures as a function of CS concentration. It was found that in PVA dilute solutions, CS was well dispersed, and the system remained stable. However, above the PVA critical concentration (c > c*), flocculation or precipitation took place at lower CS concentrations. Counterintuitively, restabilization was achieved upon increasing CS concentration. The balance between steric repulsion from adsorbed PVA and depletion attraction from free PVA was identified as the key factor, which is determined by the PVA-CS interactions. This anomalous restabilization at high colloid concentrations may facilitate the preparation of high-filling polymer composites.

The emergence of bulk structure in clusters via isotropic multi-well pair potentials

The mechanical, optical, and chemical properties of a wide variety of soft materials are enabled and constrained by their bulk structure. How this structure emerges at small system sizes during self-assembly has been the subject of decades of research, with the aim of designing and controlling material functionality. Despite these efforts, it is still not fundamentally understood how nontrivial interparticle interactions in a finite N-body system influence resultant structure, and how that structure depends on N. In this study, we investigate the emergence of non-close packings using multi-well isotropic pair potentials to simulate finite cluster formation of four distinct two-dimensional crystal structures. These pair potentials encode multiple preferred length scales into the system, allowing us to understand how anisotropic structural motifs-as opposed to close-packing-emerge as cluster size N increases. We find a tendency toward close-packing at small system sizes irrespective of the bulk structure; however, the system size at which bulk structure emerges is influenced by the coordination number of the bulk and the shape of the pair potential. Anisotropic structure emerges through the formation of bonds at a secondary bonding length at larger system sizes, and it is also dependent upon the shape of the pair potential. Our findings demonstrate that tuning particle-particle interactions can enable the engineering of nano- or mesoscale soft matter clusters, in applications as diverse as drug delivery and hierarchical materials design.

Modulating the Short-Range Correlation through the Assembly of Anisotropic Colloidal Clusters

Disordered structures with short-range correlation exhibit unique photonic or thermal properties, often arising from the self-assembly of monodisperse microspheres. Colloidal clusters, aggregates of a defined number of microspheres, have anisotropic shapes and offer a unique approach to tailor the short-range correlation compared to traditional isotropic microspheres. However, this potential remains largely unexplored. To this end, we have prepared triangular and tetrahedral colloidal clusters and coassemble them with polystyrene microspheres into both monolayers and thick films (∼10 μm) over 5 mm × 5 mm areas. Through combining scanning electron microscopy images and laser scattering measurements, we show that increasing cluster concentration from 0% to 40% increases disorder in both thin and thick films. Beyond 40%, the short-range order in thin films plateaus, while it increases with triangular clusters but decreases with tetrahedral clusters in thick films. The distinct roles of triangular and tetrahedral clusters offer new insights into design of correlated disordered materials for novel applications.

Tuning Colloidal Reactions

The precise control of complex reactions is critical for biological processes, yet our inability to design for specific outcomes limits the development of synthetic analogs. Here, we leverage differentiable simulators to design nontrivial reaction pathways in colloidal assemblies. By optimizing over external structures, we achieve controlled disassembly and particle release from colloidal shells. Lastly, we characterize the role of configurational entropy in the structure via both forward calculations and optimization, inspiring new parameterizations of designed colloidal reactions.

The Valence-Dependent Activity of Colloidal Molecules as Ice Recrystallization Inhibitors

Inspired by advances in cryopreservation techniques, which are essential for modern biomedical applications, there is a special interest in the ice recrystallization inhibition (IRI) of the antifreeze protein (AFPs) mimics. There are in-depth studies on synthetic materials mimicking AFPs, from simple molecular structure levels to complex self-assemblies. Herein, we report the valence-dependent IRI activity of colloidal organic molecules (CMs). The CMs were prepared through polymerization-induced particle-assembly (PIPA) of the ABC-type triblock terpolymer of poly(acryloxyethyl trimethylammonium chloride)-b-poly(benzyl acrylate)-b-poly(diacetone acrylamide) (PATAC-b-PBzA-b-PDAAM) at high monomer conversions. Stabilized by the cationic block of PATAC, the strong intermolecular H-bonding and incompatibility of the PDAAM block with PBzA contributed to the in situ formation of Janus particles (AX1) beyond the initial spherical seed particles (AX0), as well as the high valency clusters of linear AX2 and trigonal AX3. Their distribution was controlled mainly by the polymerization degrees (DPs) of PATAC and PDAAM blocks. IRI activity results of the CMs suggest that the higher fraction of AX1 results in the better IRI activity. Increasing the fraction of AX1 from 27% to 65% led to a decrease of the mean grain size from 39.8% to 10.9% and a depressed growth rate of ice crystals by 58%. Moreover, by replacing the PDAAM block with the temperature-responsive one of poly(N-isopropylacrylamide) (PNIPAM), temperature-adjustable IRI activity was observed, which is well related to the reversible transition of AX0 to AX1, providing a new idea for the molecular design of amphiphilic polymer nanoparticle-based IRI activity materials.

Spearheading a new era in complex colloid synthesis with TPM and other silanes

Colloid science has recently grown substantially owing to the innovative use of silane coupling agents (SCAs), especially 3-trimethoxysilylpropyl methacrylate (TPM). SCAs were previously used mainly as modifying agents, but their ability to form droplets and condense onto pre-existing structures has enabled their use as a versatile and powerful tool to create novel anisotropic colloids with increasing complexity. In this Review, we highlight the advances in complex colloid synthesis facilitated by the use of TPM and show how this has driven remarkable new applications. The focus is on TPM as the current state-of-the-art in colloid science, but we also discuss other silanes and their potential to make an impact. We outline the remarkable properties of TPM colloids and their synthesis strategies, and discuss areas of soft matter science that have benefited from TPM and other SCAs.

Formation of two-dimensional diamond-like colloidal crystals using layer-by-layer electrostatic self-assembly

We report here that a two-dimensional (2D) diamond-like structure of micron-sized colloidal particles can be obtained by layer-by-layer self-assembly. Positively and negatively charged silica particles, 1 μm in diameter, were used in the experiments. On a positively charged, flat glass substrate, the first layer of negatively charged particles was prepared to form a non-close-packed 2D crystal. Then the second and third layers were fabricated using electrostatic adsorption. The positions of adsorbed particles were controllable by tuning the zeta-potential of the particles and the salt concentration of the medium. The FDTD calculations show that the 2D diamond structures of particles with higher refractive index (titania) have an absorption band in the wavelength range corresponding to the photonic band gap of the 3D bulk crystal. We expect these findings to be useful for the fabrication of novel photonic materials.

Flexible Colloidal Molecules with Directional Bonds and Controlled Flexibility

Colloidal molecules are ideal model systems for mimicking real molecules and can serve as versatile building blocks for the bottom-up self-assembly of flexible and smart materials. While most colloidal molecules are rigid objects, the development of colloidal joints has made it possible to endow them with conformational flexibility. However, their unrestricted range of motion does not capture the limited movement and bond directionality that is instead typical of real molecules. In this work, we create flexible colloidal molecules with an in situ controllable motion range and bond directionality by assembling spherical particles onto cubes functionalized with complementary surface-mobile DNA. By varying the sphere-to-cube size ratio, we obtain colloidal molecules with different coordination numbers and find that they feature a constrained range of motion above a critical size ratio. Using theory and simulations, we show that the particle shape together with the multivalent bonds creates an effective free-energy landscape for the motion of the sphere on the surface of the cube. We quantify the confinement of the spheres on the surface of the cube and the probability to change facet. We find that temperature can be used as an extra control parameter to switch in situ between full and constrained flexibility. These flexible colloidal molecules with a temperature switching motion range can be used to investigate the effect of directional yet flexible bonds in determining their self-assembly and phase behavior, and may be employed as constructional units in microrobotics and smart materials.

Molecular Engineering of Colloidal Atoms

Creation of architectures with exquisite hierarchies actuates the germination of revolutionized functions and applications across a wide range of fields. Hierarchical self-assembly of colloidal particles holds the promise for materialized realization of structural programing and customizing. This review outlines the general approaches to organize atom-like micro- and nanoparticles into prescribed colloidal analogs of molecules by exploiting diverse interparticle driving motifs involving confining templates, interactive surface ligands, and flexible shape/surface anisotropy. Furthermore, the self-regulated/adaptive co-assembly of simple unvarnished building blocks is discussed to inspire new designs of colloidal assembly strategies.

Clustering of charged colloidal particles in the microgravity environment of space

We conducted a charge-charge clustering experiment of positively and negatively charged colloidal particles in aqueous media under a microgravity environment at the International Space Station. A special setup was used to mix the colloid particles in microgravity and then these structures were immobilized in gel cured using ultraviolet (UV) light. The samples returned to the ground were observed by optical microscopy. The space sample of polystyrene particles with a specific gravity ρ (=1.05) close to the medium had an average association number of ~50% larger than the ground control and better structural symmetry. The effect of electrostatic interactions on the clustering was also confirmed for titania particles (ρ ~ 3), whose association structures were only possible in the microgravity environment without any sedimentation they generally suffer on the ground. This study suggests that even slight sedimentation and convection on the ground significantly affect the structure formation of colloids. Knowledge from this study will help us to develop a model which will be used to design photonic materials and better drugs.

Electrostatic Heteroaggregation: Fundamentals and Applications in Interfacial Engineering

The aggregation of oppositely charged soft materials (particles, surfactants, polyelectrolytes, etc.) that differ in one or more physical or chemical attributes, broadly referred to as electrostatic heteroaggregation, has been an active area of research for several decades now. While electrostatic heteroaggregation (EHA) is relevant to diverse fields such as environmental engineering, food technology, and pharmaceutical formulations, more recently there has been a resurgence to explore various aspects of this phenomenon in the context of interface stabilization and the development of functional materials. In this Feature Article, we provide an overview of the recent contributions of our group to this exciting field with particular emphasis on fundamental studies of electrostatic heteroaggregation between oppositely charged systems in the bulk, at interfaces, and across the bulk/interface. The influence of the size and shape of particles and the surface charge of heteroaggregates on the formation of Pickering emulsions and their utilization in the development of porous ceramics is discussed.

Transfer of multi-DNA patches by colloidal stamping

Patchy particles have received great attention due to their ability to develop directional and selective interactions and serve as building units for the self-assembly of innovative colloidal molecules and crystalline structures. Although synthesizing particles with multiple dissimilar patches is still highly challenging and lacks efficient methods, these building blocks would open paths towards a broader range of ordered materials with inherent properties. Herein, we describe a new approach to pattern functional DNA patches at the surface of particles, by the use of colloidal stamps. DNA inks are transferred only at the contact zones between the target particles and the stamps thanks to selective strand-displacement reactions. The produced DNA-patchy particles are ideal candidates to act as advanced precision/designer building blocks to self-assemble the next generation of colloidal materials.

Advances in Colloidal Building Blocks: Toward Patchy Colloidal Clusters

The scalable synthetic route to colloidal atoms has significantly advanced over the past two decades. Recently, colloidal clusters with DNA-coated cores called "patchy colloidal clusters" have been developed, providing a directional bonding with specific angle of rotation due to the shape complementarity between colloidal clusters. Through a DNA-mediated interlocking process, they are directly assembled into low-coordination colloidal structures, such as cubic diamond lattices. Herein, the significant progress in recent years in the synthesis of patchy colloidal clusters and their assembly in experiments and simulations is reviewed. Furthermore, an outlook is given on the emerging approaches to the patchy colloidal clusters and their potential applications in photonic crystals, metamaterials, topological photonic insulators, and separation membranes.

Self-Assembly Dynamics of Reconfigurable Colloidal Molecules

Colloidal molecules are designed to mimic their molecular analogues through their anisotropic shape and interactions. However, current experimental realizations are missing the structural flexibility present in real molecules thereby restricting their use as model systems. We overcome this limitation by assembling reconfigurable colloidal molecules from silica particles functionalized with mobile DNA linkers in high yields. We achieve this by steering the self-assembly pathway toward the formation of finite-sized clusters by employing high number ratios of particles functionalized with complementary DNA strands. The size ratio of the two species of particles provides control over the overall cluster size, i.e., the number of bound particles N, as well as the degree of reconfigurability. The bond flexibility provided by the mobile linkers allows the successful assembly of colloidal clusters with the geometrically expected maximum number of bound particles and shape. We quantitatively examine the self-assembly dynamics of these flexible colloidal molecules by a combination of experiments, agent-based simulations, and an analytical model. Our "flexible colloidal molecules" are exciting building blocks for investigating and exploiting the self-assembly of complex hierarchical structures, photonic crystals, and colloidal metamaterials.

Customizable nano-sized colloidal tetrahedrons by polymerization-induced particle self-assembly (PIPA)

Colloidal molecules (CMs) are colloidal clusters with molecule-like symmetry and architecture, generated from the self-assembly of nanoparticles with attractive patches. However, large-scale preparation of patchy nanoparticles remains challenging. Here, we...

Self-regulated co-assembly of soft and hard nanoparticles

Controlled self-assembly of colloidal particles into predetermined organization facilitates the bottom-up manufacture of artificial materials with designated hierarchies and synergistically integrated functionalities. However, it remains a major challenge to assemble individual nanoparticles with minimal building instructions in a programmable fashion due to the lack of directional interactions. Here, we develop a general paradigm for controlled co-assembly of soft block copolymer micelles and simple unvarnished hard nanoparticles through variable noncovalent interactions, including hydrogen bonding and coordination interactions. Upon association, the hairy micelle corona binds with the hard nanoparticles with a specific valence depending exactly on their relative size and feeding ratio. This permits the integration of block copolymer micelles with a diverse array of hard nanoparticles with tunable chemistry into multidimensional colloidal molecules and polymers. Secondary co-assembly of the resulting colloidal molecules further leads to the formation of more complex hierarchical colloidal superstructures. Notably, such colloidal assembly is processible on surface either through initiating the alternating co-assembly from a micelle immobilized on a substrate or directly grafting a colloidal oligomer onto the micellar anchor.

Colloidal self-assembly enables bottom-up manufacture of materials with designed hierarchies and functions. Here the authors develop a facile method to construct multidimensional colloidal architectures via the association of soft block copolymer micelles with simple unvarnished hard nanoparticles.

Patchy Colloidal Clusters with Broken Symmetry

Colloidal clusters are prepared by assembling positively charged cross-linked polystyrene (PS) particles onto negatively charged liquid cores of swollen polymer particles. PS particles at the interface of the liquid core are closely packed around the core due to interfacial wetting. Then, by evaporating solvent in the liquid cores, polymers in the cores are solidified and the clusters are cemented. As the swelling ratio of PS cores increases, cores at the center of colloidal clusters are exposed, forming patchy colloidal clusters. Finally, by density gradient centrifugation, high-purity symmetric colloidal clusters are obtained. When silica-PS core-shell particles are swollen and serve as the liquid cores, hybrid colloidal clusters are obtained in which each silica nanoparticle is relocated to the liquid core interface during the swelling-deswelling process breaking symmetry in colloidal clusters as the silica nanoparticle in the core is comparable in size with the PS particle in the shell. The configuration of colloidal clusters is determined once the number of particles around the liquid core is given, which depends on the size ratio of the liquid core and shell particle. Since hybrid clusters are heavier than PS particles, they can be purified using centrifugation.

Colloidal Particles with Triangular Patches

Self-assembling colloidal particles into clathrate hydrates requires the particles to have tetrahedral bonds in the eclipsed conformation. It has been suggested that colloidal particles with eclipsed triangular-shaped patches can form clusters in the eclipsed conformation that leads to colloidal clathrate hydrates. However, in experiments, patches have been limited to circular shapes due to surface energy minimization. Here, we extend the particle synthesis strategy and show that colloidal particles with triangular patches can be readily fabricated by controlling the viscosity of the liquid oil droplets during a colloidal fusion process. The position, orientation, curvature, shape, and size of the patches are all exclusively determined by the intrinsic symmetry of the colloidal clusters, resulting in dipatch particles with eclipsed patches and tetrahedral patchy particles with patch vertices pointing toward each other. Patch curvature can be controlled by tuning the viscosity of the oil droplets and using different surfactants. Using strain-promoted azide-alkyne cycloaddition, single-stranded DNA can be selectively functionalized on the patches. However, after annealing these particles, dipatch particles form chains because the patches are too small to form clathrate hydrates. Under certain conditions, tetrahedral triangular patchy particles should prefer the eclipsed conformation, as it maximizes DNA hybridization. However, we observe random aggregates, which result from having triangular patches that are too big. We estimate that tetrahedral patchy particles that can crystallize need to be less than 1 μm in diameter.

Polyhedral plasmonic nanoclusters through multi-step colloidal chemistry

We describe a new approach to making plasmonic metamolecules with well-controlled resonances at optical wavelengths. Metamolecules are highly symmetric, subwavelength-scale clusters of metal and dielectric. They are of interest for metafluids, isotropic optical materials with applications in imaging and optical communications. For such applications, the morphology must be precisely controlled: the optical response is sensitive to nanometer-scale variations in the thickness of metal coatings and the distances between metal surfaces. To achieve this precision, we use a multi-step colloidal synthesis approach. Starting from highly monodisperse silica seeds, we grow octahedral clusters of polystyrene spheres using seeded-growth emulsion polymerization. We then overgrow the silica and remove the polystyrene to create a dimpled template. Finally, we attach six silica satellites to the template and coat them with gold. Using single-cluster spectroscopy, we show that the plasmonic resonances are reproducible from cluster to cluster. By comparing the spectra to theory, we show that the multi-step synthesis approach can control the distances between metallic surfaces to nanometer-scale precision. More broadly, our approach shows how metamolecules can be produced in bulk by combining different, high-yield colloidal synthesis steps, analogous to how small molecules are produced by multi-step chemical reactions.

Colloidal assembly in droplets: structures and optical properties

Colloidal assembly in emulsion drops provides fundamental tools for studying optimum particle arrangement under spherical confinement and practical means for producing photonic microparticles. Recent progress has revealed that energetically favored cluster configurations are different from conventional supraballs, which could enhance optical performance. This paper reviews state-of-the-art emulsion-templated colloidal clusters, and particularly focuses on recently reported novel structures such as icosahedral, decahedral, and single-crystalline face-centered cubic (fcc) clusters. We classify the clusters according to the number of component particles as small (N < O(10²)), medium (O(10²) ≤N≤O(10⁴)), and large (N≥O(10⁵)). For each size of clusters, we discuss the detailed structures, mechanisms of cluster formation, and optical properties and potential applications. Finally, we outline current challenges and questions that require further investigation.

Colloidal diamond

Self-assembling colloidal particles in the cubic diamond crystal structure could potentially be used to make materials with a photonic bandgap^1-3. Such materials are beneficial because they suppress spontaneous emission of light¹ and are valued for their applications as optical waveguides, filters and laser resonators⁴, for improving light-harvesting technologies^{5-7 and for other applications4,8}. Cubic diamond is preferred for these applications over more easily self-assembled structures, such as face-centred-cubic structures^9,10, because diamond has a much wider bandgap and is less sensitive to imperfections^11,12. In addition, the bandgap in diamond crystals appears at a refractive index contrast of about 2, which means that a photonic bandgap could be achieved using known materials at optical frequencies; this does not seem to be possible for face-centred-cubic crystals^3,13. However, self-assembly of colloidal diamond is challenging. Because particles in a diamond lattice are tetrahedrally coordinated, one approach has been to self-assemble spherical particles with tetrahedral sticky patches^14-16. But this approach lacks a mechanism to ensure that the patchy spheres select the staggered orientation of tetrahedral bonds on nearest-neighbour particles, which is required for cubic diamond^15,17. Here we show that by using partially compressed tetrahedral clusters with retracted sticky patches, colloidal cubic diamond can be self-assembled using patch-patch adhesion in combination with a steric interlock mechanism that selects the required staggered bond orientation. Photonic bandstructure calculations reveal that the resulting lattices (direct and inverse) have promising optical properties, including a wide and complete photonic bandgap. The colloidal particles in the self-assembled cubic diamond structure are highly constrained and mechanically stable, which makes it possible to dry the suspension and retain the diamond structure. This makes these structures suitable templates for forming high-dielectric-contrast photonic crystals with cubic diamond symmetry.

How size ratio and segregation affect the packing of binary granular mixtures

For reaching high packing fractions, grains of various sizes are often mixed together allowing the small grains to fill the voids created by the large ones. However, in most cases, granular segregation occurs leading to lower packing fractions. We performed a wide set of experiments with different binary granular systems, proving that two main parameters are respectively the volume fraction f of small beads and the grain size ratio α. In addition, we show how granular segregation affects the global packing fraction. We propose a model with a strong dependency on α that takes into account possible granular segregation. Our model is in good agreement with both earlier experimental and simulation data.

Self-Assembly of Colloidal Molecules Based on Host-Guest Chemistry and Geometric Constraints

The preparation of colloidal molecules (CMs), that is, clusters of colloids with a defined aggregation number and configuration, is of continued and significant interest in colloid chemistry and materials science and numerous interactions have been utilized to drive their (self-)assembly. However, only very few reports are available on the assembly of CMs based on host-guest chemistry. In this paper, we investigate the assembly of like-charged silica particles into well-defined, core-satellite AB_n-type CMs in water, mediated by host-guest interactions and geometric constraints. Exploiting the inherent dynamics of noncovalent attraction and making use of a soft polymer shell to enhance multivalent host-guest interactions, we successfully synthesized AB₃, AB₄, and AB₆ CMs by selecting the appropriate size ratio of satellite to core particles.

Probing particle heteroaggregation using analytical centrifugation

The controlled aggregation of colloidal particles is not only a widespread natural phenomenon but also serves as a tool to design complex building blocks with tailored shape and functionalities. However, the quantitative characterization of such heteroaggregation processes remains challenging. Here, we demonstrate the use of analytical centrifugation to characterize the heteroaggregation of silica particles and soft microgels bearing similar surface charges. We investigate the attachment as well as the stability of the formed heteroaggregates as a function of particle to microgel surface ratio, microgel size and the influence of temperature. The attachment of microgels onto the colloidal particles induces a change in the sedimentation coefficient, which is used to quantitatively identify the number of attached microgels. We corroborate the shift in sedimentation coefficient by computer simulations of the frictional properties of heteroaggregates via a modified Brownian dynamic algorithm. The comparison between theoretical investigations and experiments suggest that the microgels deform and flatten upon attachment.

A microgel-Pickering emulsion route to colloidal molecules with temperature-tunable interaction sites

A simple Pickering emulsion route has been developed for the assembly of temperature-responsive poly(N-isopropylacrylamide) (PNIPAM) microgel particles into colloidal molecules comprising a small number of discrete microgel interaction sites on a central oil emulsion droplet. Here, the surface activity of the microgels serves to drive their assembly through adsorption to growing polydimethylsiloxane (PDMS) emulsion oil droplets of high monodispersity, prepared in situ via ammonia-catalysed hydrolysis and condensation of dimethyldiethoxysilane (DMDES). A dialysis step is employed in order to limit further growth once the target assembly size has been reached, thus yielding narrowly size-distributed, colloidal molecule-like microgel-Pickering emulsion oil droplets with well-defined microgel interaction sites. The temperature-responsiveness of the PNIPAM interaction sites will allow for the directional interactions to be tuned in a facile manner with temperature, all the way from soft repulsive to short-range attractive as the their volume phase transition temperature (VPTT) is crossed. Finally, the microgel-Pickering emulsion approach is extended to a mixture of PNIPAM and poly(N-isopropylmethacrylamide) (PNIPMAM) microgels that differ with respect to their VPTT, this in order to prepare patchy colloidal molecules where the directional interactions will be more readily resolved.

Synthesis of AB n -type colloidal molecules by polymerization-induced particle-assembly (PIPA)

Conventional synthesis of colloidal molecules (CMs) mainly depends on particle-based self-assembly of patchy building blocks. However, direct access to CMs by the self-assembly of isotropic colloidal subunits remains challenging. Here, we report the mass production of AB n -type CMs by polymerization-induced particle-assembly (PIPA), using a linear ABC triblock terpolymer system. Starting from diblock copolymer spheres, the association of spheres takes place in situ during the polymerization of the third block. The third blocks aggregate into attractive domains, which connect spheres into CMs. The stability of CMs is ensured, as long as the conversions are limited to ca. 50%, and the pH is low. The valence of AB n -type CMs (n = 2-6) is determined by the volume ratio of the polymer blocks. By tuning the volume ratio, 78.5% linear AB2-type CMs are yielded. We demonstrate that polymerization-induced particle-assembly is successful for the scalable fabrication of AB n -type CMs (50 g L-1), and can be easily extended to vastly different triblock terpolymers, for a wide range of applications.

Colloidal molecules and patchy particles: complementary concepts, synthesis and self-assembly

About the latest developments regarding self-assembly of textured colloids and its prospects.

Preparation of colloidal molecules with temperature-tunable interactions from oppositely charged microgel spheres

The self-assembly of small colloidal clusters, so-called colloidal molecules, into crystalline materials has proven extremely challenging, the outcome often being glassy, amorphous states where positions and orientations are locked. In this paper, a new type of colloidal molecule is therefore prepared, assembled from poly(N-isopropylacrylamide) (PNIPAM)-based microgels that due to their well documented softness and temperature-response allow for greater defect tolerance compared to hard spheres and for convenient in situ tuning of size, volume fraction and inter-particle interactions with temperature. The microgels (B) are assembled by electrostatic adsorption onto oppositely charged, smaller-sized microgels (A), where the relative size of the two determines the valency (n) of the resulting core-satellite ABn-type colloidal molecules. Following assembly, a microfluidic deterministic lateral displacement (DLD) device is used to effectively isolate AB4-type colloidal molecules of tetrahedral geometry that possess a repulsive-to-attractive transition on crossing the microgels' volume phase transition temperature (VPTT). These soft, temperature-responsive colloidal molecules constitute highly promising building blocks for the preparation of new materials with emergent properties, and their optical wavelength-size makes them especially interesting for optical applications.

A Droplet-Based Microfluidics Route to Temperature-Responsive Colloidal Molecules

Small clusters of spherical colloids that mimic real molecules, so-called colloidal molecules, hold great promise as building blocks in bottom-up routes to new materials. However, their typical hard sphere nature has hampered their assembly into ordered structures, largely due to a lack of control in the interparticle interactions. To provide easy external control of the interactions, the present work focuses on the preparation of colloidal molecules from temperature-responsive microgel particles that undergo a transition from a soft repulsive to a short-range attractive state as their characteristic volume phase transition temperature (VPTT) is crossed. Preparation of the colloidal molecules starts with the use of a droplet-based microfluidics device to form highly uniform water-in-oil (W/O) emulsion droplets containing, on average and with a narrow distribution, four microgels per droplet. Evaporation of the water then leads to the formation of colloidal molecule-like clusters, which can be harvested following cross-linking and phase transfer. We use a mixture of two types of microgels, one based on poly(N-isopropylacrylamide) (PNIPAM) and the other on poly(N-isopropylmethacrylamide) (PNIPMAM), to prepare bicomponent colloidal molecules, and show that the difference in VPTT between the two allows for induction of attractive interparticle interactions between the PNIPAM interaction sites at temperatures in between the two VPTTs, analogous to the interactions among patchy biomacromolecules such as many proteins.

Colloid supported lipid bilayers for self-assembly

The use of colloid supported lipid bilayers (CSLBs) has recently been extended to create colloidal joints, that enable the assembly of structures with internal degrees of flexibility, and to study lipid membranes on curved and closed geometries. These novel applications of CSLBs rely on previously unappreciated properties: the simultaneous fluidity of the bilayer, lateral mobility of inserted (linker) molecules and colloidal stability. Here we characterize every step in the manufacturing of CSLBs in view of these requirements using confocal microscopy and fluorescence recovery after photobleaching (FRAP). Specifically, we have studied the influence of different particle properties (roughness, surface charge, chemical composition, polymer coating) on the quality and mobility of the supported bilayer. We find that the insertion of lipopolymers in the bilayer can affect its homogeneity and fluidity. We improve the colloidal stability by inserting lipopolymers or double-stranded inert DNA into the bilayer. We include surface-mobile DNA linkers and use FRAP to characterize their lateral mobility both in their freely diffusive and bonded state. Finally, we demonstrate the self-assembly of flexibly linked structures from the CSLBs modified with surface-mobile DNA linkers. Our work offers a collection of experimental tools for working with CSLBs in applications ranging from controlled bottom-up self-assembly to model membrane studies.

Self-assembled microrings of Au nanoparticle and Au nanorod clusters formed at the equators of Janus particles

A method for fabricating polymer Janus particles with microring structures at their equators has been developed. This method allows gold nanoparticles and nanorods to be aligned and densely packed along the microrings.

A method for fabricating polymer Janus particles with metal nanoparticle microring structures at their equators has been developed.

Hierarchical Crystals Formed from DNA-Functionalized Janus Nanoparticles

Harnessing anisotropic interactions in a DNA-mediated nanoparticle assembly holds great promise as a rational strategy to advance this important area. Here, using molecular dynamics simulations, we report the formation of novel hierarchical crystalline assemblies of Janus nanoparticles functionalized with two types of DNA chains (DNA-JNPs). We find that in addition to the primary nanoparticle crystallization into face-centered cubic (FCC) structure, sequence-specific DNA hybridization events further direct the rotational orientation of the DNA-JNPs to diverse secondary crystalline phases including simple cubic (SC), tetragonally ordered cylinder (P4), and lamella (L) structures, which are mapped in the phase diagrams relating to various asymmetric parameters. The crystallization dynamics of such hierarchical crystals is featured by two consequent processes: entropy-dominated translational order for the primary crystalline structure and enthalpy-dominated rotational order for the secondary crystalline structure. For DNA-JNPs with high asymmetry in DNA sequence length, tetrahedral nanoclusters tend to be favored, which is revealed to be governed by the conformational entropy penalty caused by bounded DNA chains. This work might bear important consequences for constructing new classes of nanoparticle crystals with designed structures and properties at multiple levels and in a predictable manner.

Opto-Thermophoretic Manipulation and Construction of Colloidal Superstructures in Photocurable Hydrogels

Light-based manipulation of colloidal particles holds great promise in fabrication of functional devices. Construction of complex colloidal superstructures using traditional optical tweezers is limited by high operation power and strong heating effect. Herein, we demonstrate low-power opto-thermophoretic manipulation and construction of colloidal superstructures in photocurable hydrogels. By introducing cationic surfactants into a hydrogel solution under a light-directed temperature field, we create both thermoelectric fields and depletion attraction forces to control the suspended colloidal particles. The particles of various sizes and compositions are thus trapped and organized into various superstructures. Furthermore, the colloidal superstructures are immobilized and patterned onto solid-state substrates through UV-induced photopolymerization of the hydrogel. Our opto-thermophoretic technique will open up avenues for bottom-up assembly of colloidal materials and devices.

Mix-and-Melt Colloidal Engineering

Increasing significance is being placed on the synthesis of smart colloidal particles, since the route to various meta-materials has been outlined through their bottom-up self-assembly. Unfortunately, making particles with well-defined shape and surface chemistry often requires considerable effort and time, and as such, they are available only in restrictive yields. Here we report a synthetic methodology, which we refer to as mix-and-melt reactions (MMR), that allows for rapid prototyping and mass production of anisotropic core-shell colloids. MMR take advantage of the synergistic properties between common colloidal suspensions by aggregating then reconfiguring polystyrene shell particles onto core particle substrates. By systematically exchanging cores and shells, the resultant core-shell particle's properties are manipulated in a modular fashion. The influence of the constituent particles' size ratio is extensively explored, which is shown to tune shell thickness, change the aspect ratio of shells on anisotropic cores, and access specific shapes such as tetrahedra. Beyond particle shape, mixed shell systems are utilized to create regular surface patches. Surface Evolver simulations are used to demonstrate how randomly packed clusters melt into regular shapes via a shell compartmentalization mechanism.

Micrometer-sized TPM emulsion droplets with surface-mobile binding groups

Colloids coated with lipid membranes have been widely employed for fundamental studies of lipid membrane processes, biotechnological applications such as drug delivery and biosensing, and more recently, for self-assembly. The latter has been made possible by inserting DNA oligomers with covalently linked hydrophobic anchors into the membrane. The lateral mobility of the DNA linkers on micrometer-sized droplets and solid particles has opened the door to creating structures with unprecedented structural flexibility. Here, we investigate micro-emulsions of TPM (3-(trimethoxysilyl)propyl methacrylate) as a platform for lipid monolayers and further functionalization with proteins and DNA oligonucleotides. TPM droplets can be produced with a narrow size distribution and are polymerizable, thus providing supports for model lipid membranes with controlled size and curvature. With fluorescence recovery after photobleaching, we observed that droplet-attached lipids, NeutrAvidin proteins, as well as DNA oligonucleotides all show mobility on the surface. We explored the assembly of micron-sized particles on TPM-droplets by exploiting either avidin-biotin interactions or double-stranded DNA with complementary single-stranded end groups. While the single molecules are mobile, the particles that are attached to them are not. We propose that this is caused by the heterogeneous nature of emulsified TPM, which forms an oligomer network that limits the collective motion of linkers, but allows the surface mobility of individual molecules.

Molecular Recognition in the Colloidal World

Colloidal self-assembly is a bottom-up technique to fabricate functional nanomaterials, with paramount interest stemming from programmable assembly of smaller building blocks into dynamic crystalline domains and photonic materials. Multiple established colloidal platforms feature diverse shapes and bonding interactions, while achieving specific orientations along with short- and long-range order. A major impediment to their universal use as building blocks for predesigned architectures is the inability to precisely dictate and control particle functionalization and concomitant reversible self-assembly. Progress in colloidal self-assembly necessitates the development of strategies that endow bonding specificity and directionality within assemblies. Methodologies that emulate molecular and polymeric three-dimensional (3D) architectures feature elements of covalent bonding, while high-fidelity molecular recognition events have been installed to realize responsive reconfigurable assemblies. The emergence of anisotropic 'colloidal molecules', coupled with the ability to site-specifically decorate particle surfaces with supramolecular recognition motifs, has facilitated the formation of superstructures via directional interactions and shape recognition. In this Account, we describe supramolecular assembly routes to drive colloidal particles into precisely assembled architectures or crystalline lattices via directional noncovalent molecular interactions. The design principles are based upon the fabrication of colloidal particles bearing surface-exposed functional groups that can undergo programmable conjugation to install recognition motifs with high fidelity. Modular and versatile by design, our strategy allows for the introduction and integration of molecular recognition principles into the colloidal world. We define noncovalent molecular interactions as site-specific forces that are predictable (i.e., feature selective and controllable complementary bonding partners) and can engage in tunable high-fidelity interactions. Examples include metal coordination and host-guest interactions as well as hydrogen bonding and DNA hybridization. On the colloidal scale, these interactions can be used to drive the reversible formation of open structures. Key to the design is the ability to covalently conjugate supramolecular motifs onto the particle surface and/or noncovalently associate with small molecules that can mediate and direct assembly. Efforts exploiting the binding strength inherent to DNA hybridization for the preparation of reversible open-packed structures are then detailed. We describe strategies that led to the introduction of dual-responsive DNA-mediated orthogonal assembly as well as colloidal clusters that afford distinct DNA-ligated close-packed lattices. Further focus is placed on two essential and related efforts: the engineering of complex superstructures that undergo phase transitions and colloidal crystals featuring a high density of functional anchors that aid in crystallization. The design principles discussed in this Account highlight the synergy stemming from coupling well-established noncovalent interactions common on the molecular and polymeric length scales with colloidal platforms to engineer reconfigurable functional architectures by design. Directional strategies and methods such as those illustrated herein feature molecular control and dynamic assembly that afford both open-packed 1D and 2D lattices and are amenable to 3D colloidal frameworks. Multiple methods to direct colloidal assembly have been reported, yet few are capable of crystallizing 2D and 3D architectures of interest for optical data storage, electronics, and photonics. Indeed, early implications are that [supra]molecular control over colloidal assembly can fabricate rationally structured designer materials from simple fundamental building blocks.

Multistep Heterogeneous Nucleation in Binary Mixtures of Charged Colloidal Spheres

Nucleation plays a decisive role in determining the crystal structure and size distribution; however, understanding of the fundamentals of nucleation is quite limited. In particular, it is unclear whether a nucleus forms spontaneously from solution via a single- or multiple-step process. Here we show how a binary mixture of charged colloidal spheres nucleates heterogeneously on a flat substrate by means of Bragg microscopy, laser diffraction, and laser microscopy. In contrast with the conventional one-step and two-step nucleation mechanisms, a novel pathway of multistep heterogeneous nucleation under certain experimental conditions is highlighted by four steps: initial homogeneous fluid → prenucleation clusters → preordered prenucleation clusters → intermediate ordered phase → final crystal. It is expected that the obtained results would be helpful in rationalizing the rich phase behavior exhibited by the binary mixture systems and in developing better and broadly applicable nucleation models as well as in designing defect-free single-crystal alloys.

Assembly of "3D" plasmonic clusters by "2D" AFM nanomanipulation of highly uniform and smooth gold nanospheres

Atomic force microscopy (AFM) nanomanipulation has been viewed as a deterministic method for the assembly of plasmonic metamolecules because it enables unprecedented engineering of clusters with exquisite control over particle number and geometry. Nevertheless, the dimensionality of plasmonic metamolecules via AFM nanomanipulation is limited to 2D, so as to restrict the design space of available artificial electromagnetisms. Here, we show that “2D” nanomanipulation of the AFM tip can be used to assemble “3D” plasmonic metamolecules in a versatile and deterministic way by dribbling highly spherical and smooth gold nanospheres (NSs) on a nanohole template rather than on a flat surface. Various 3D plasmonic clusters with controlled symmetry were successfully assembled with nanometer precision; the relevant 3D plasmonic modes (i.e., artificial magnetism and magnetic-based Fano resonance) were fully rationalized by both numerical calculation and dark-field spectroscopy. This templating strategy for advancing AFM nanomanipulation can be generalized to exploit the fundamental understanding of various electromagnetic 3D couplings and can serve as the basis for the design of metamolecules, metafluids, and metamaterials.

Dimpled Polyhedral Colloids Formed by Colloidal Crystal Templating

Many approaches to the self-assembly of interesting microstructures rely on particles with engineered shapes. We create dimpled solid particles by molding oil droplets in the interstices of a close-packed colloidal crystal and polymerizing them in situ, resulting in particles containing multiple spherical dimples arranged with various polyhedral symmetries. Monodisperse micrometer-sized droplets of 3-methacryloxypropyltrimethoxysilane (TPM) are mixed with an excess of polystyrene (PS) microspheres (2.58 μm) and allowed to sediment, forming colloidal crystals with TPM droplets inside their interstitial sites. When these crystals are compressed by partial drying, the trapped droplets wet the multiple microspheres surrounding them, forming a three-dimensional capillary bridge with the symmetry of the interstitial spaces, and then mild heating triggers polymerization in situ. Depending on the initial particle volume fraction and extent of drying, a high yield of dimpled particles having different symmetries including tetrahedra and cubes is obtained. The fractional yield of different shapes varies with the size ratio of the TPM droplets and the PS microspheres forming the template lattice. Sedimentation velocity fractionation methods are effective for enrichment of specific symmetries but not complete purification. Our approach for forming polyhedral particles should be readily scalable to larger samples and smaller sized particles if desired.