Detection of Zeptojoule Microwave Pulses Using Electrothermal Feedback in Proximity-Induced Josephson Junctions

Correlation measurement of propagating microwave photons at millikelvin

Microwave photons are essential carriers of quantum information in several promising platforms for quantum computing. However, measurement of the quantum statistical properties of microwave photons is demanding owing to their low energy relative to thermal fluctuations of any room-temperature detector, and phase-insensitive voltage amplification necessarily adds noise. Here, we overcome this trade-off with a nanobolometer that directly measures the photon statistics at millikelvin. Using a cryogenic temperature-controlled blackbody radiator, we demonstrate the detection of the mean photon number ⟨ n ̂ ⟩ and reveal the expected photon number variance( Δ n ) 2 = ⟨ n ̂ ⟩ ⟨ n ̂ ⟩ + 1 , following the Bose-Einstein distribution. By engineering the coherent and incoherent proportions of the input field, we observe a transition between super-Poissonian and Poissonian statistics from the bolometric second-order correlation measurements. This technique is poised to serve in fundamental tests of quantum mechanics and function as a scalable readout solution for a quantum information processor.

Detection of single-mode thermal microwave photons using an underdamped Josephson junction

When measuring electromagnetic radiation of frequency f, the most sensitive detector counts single quanta of energy hf. Single photon detectors have been demonstrated from γ-rays to infrared wavelengths, with ongoing efforts to extend their range to microwaves. Here we show that an underdamped Josephson junction can detect 14 GHz thermal photons, with energy 10 yJ or 50 μeV, stochastically emitted by a microwave copper cavity at millikelvin temperatures. After characterizing the source and the detector, we vary the cavity temperature and measure the photon rate. The device achieves 45% efficiency and a dark count rate of 0.1 Hz over several GHz. Demonstrated super-Poissonian photon statistics is a signature of thermal light and a hallmark of quantum chaos. We discuss applications in dark matter axion searches and note its relevance to quantum information and fundamental physics.

Ga and In-based hybrid halide perovskites as an alternative to Pb: a first principles study

Lead-free hybrid halide perovskites have gained much attention in the field of photovoltaics due to their non-toxicity, stability and unique photo-physical properties. Sn and Ge-based ABX3 perovskites have been widely studied due to their similar electronic properties to Pb-based materials. However, the unstable oxidation state of Sn is a major challenge for the commercialization of this class of materials. To overcome this problem, here, we have designed a series of novel Ga and In-based A3B2X9-type perovskite materials incorporating the methylammonium (MA) organic cation in the A site and I- as the halide ion in the X site. In this regard, we have investigated different structural, electronic, optical and photovoltaic properties by employing the density functional theory formalism. The formation of a stable three dimensional perovskite structure is determined by the observed values of tolerance factor (TF) and octahedral factor (μ). The observed negative values of formation enthalpy manifest that our studied materials are also thermodynamically stable. The obtained band gap values reveal that our designed perovskite materials can act as semiconducting materials for application in photovoltaics. We have also investigated the optical properties of our studied materials and the observed values of dielectric function and absorption coefficient in the visible range of the electromagnetic spectrum indicate their excellent photo absorption. The observed theoretical power conversion efficiency (PCE) values reveal that (MA)3In2I9 (13.82%) and (MA)3 (Ga.50In.50)2I9 (12.8%) can be chosen as potential candidates for application in perovskite-based photovoltaics. This research provides a pathway for the development of less toxic and efficient semiconducting materials, offering exciting prospects for their utilization in optoelectronics and contributing to the ongoing efforts to advance sustainable energy technologies.

Quantum Computing in the Next-Generation Computational Biology Landscape: From Protein Folding to Molecular Dynamics

Modern biological science is trying to solve the fundamental complex problems of molecular biology, which include protein folding, drug discovery, simulation of macromolecular structure, genome assembly, and many more. Currently, quantum computing (QC), a rapidly emerging technology exploiting quantum mechanical phenomena, has developed to address current significant physical, chemical, biological issues, and complex questions. The present review discusses quantum computing technology and its status in solving molecular biology problems, especially in the next-generation computational biology scenario. First, the article explained the basic concept of quantum computing, the functioning of quantum systems where information is stored as qubits, and data storage capacity using quantum gates. Second, the review discussed quantum computing components, such as quantum hardware, quantum processors, and quantum annealing. At the same time, article also discussed quantum algorithms, such as the grover search algorithm and discrete and factorization algorithms. Furthermore, the article discussed the different applications of quantum computing to understand the next-generation biological problems, such as simulation and modeling of biological macromolecules, computational biology problems, data analysis in bioinformatics, protein folding, molecular biology problems, modeling of gene regulatory networks, drug discovery and development, mechano-biology, and RNA folding. Finally, the article represented different probable prospects of quantum computing in molecular biology.

Designing a Graphene Metasurface Organic Material Sensor for Detection of Organic Compounds in Wastewater

In many fields, such as environmental monitoring, food safety, and medical diagnostics, the identification of organic compounds is essential. It is crucial to create exceptionally sensitive and selective sensors for the detection of organic compounds in order to safeguard the environment and human health. Due to its outstanding electrical, mechanical, and chemical characteristics, the two-dimensional carbon substance graphene has recently attracted much attention for use in sensing applications. The purpose of this research is to create an organic material sensor made from graphene for the detection of organic substances like phenol, ethanol, methanol, chloroform, etc. Due to its high surface-to-volume ratio and potent interactions with organic molecules, graphene improves the sensor's performance while the metasurface structure enables the design of highly sensitive and selective sensing elements. The suggested sensor is highly sensitive and accurate at detecting a broad spectrum of organic molecules, making it appropriate for a number of applications. The creation of this sensor has the potential to have a substantial impact on the field of organic sensing and increase the safety of food, medicine, and the environment. The graphene metasurface organic material sensor (GMOMS) was categorized into three types denoted as GMOMS1, GMOMS2, and GMOMS3 based on the specific application of the graphene chemical potential (GCP). In GMOMS1, GCP was applied on both the CSRR and CS surfaces. In GMOMS2, GCP was applied to the CS surface and the surrounding outer region of the CSRR. In GMOMS3, GCP was applied to the CSRR and the surrounding outer region of the CSRR surface. The results show that all three designs exhibit high relative sensitivity, with the maximum values ranging from 227 GHz/RIU achieved by GMOMS1 to 4318 GHz/RIU achieved by GMOMS3. The FOM values achieved for all the designs range from 2.038 RIU-1 achieved by GMOMS2 to 31.52 RIU-1 achieved by GMOMS3, which is considered ideal in this paper.

Graphene-based Josephson junction microwave bolometer

Sensitive microwave detectors are essential in radioastronomy¹, dark-matter axion searches² and superconducting quantum information science^3,4. The conventional strategy to obtain higher-sensitivity bolometry is the nanofabrication of ever smaller devices to augment the thermal response^5-7. However, it is difficult to obtain efficient photon coupling and to maintain the material properties in a device with a large surface-to-volume ratio owing to surface contamination. Here we present an ultimately thin bolometric sensor based on monolayer graphene. To utilize the minute electronic specific heat and thermal conductivity of graphene, we develop a superconductor-graphene-superconductor Josephson junction^8-13 bolometer embedded in a microwave resonator with a resonance frequency of 7.9 gigahertz and over 99 per cent coupling efficiency. The dependence of the Josephson switching current on the operating temperature, charge density, input power and frequency shows a noise-equivalent power of 7 × 10^-19 watts per square-root hertz, which corresponds to an energy resolution of a single 32-gigahertz photon¹⁴, reaching the fundamental limit imposed by intrinsic thermal fluctuations at 0.19 kelvin. Our results establish that two-dimensional materials could enable the development of bolometers with the highest sensitivity allowed by the laws of thermodynamics.

Bolometer operating at the threshold for circuit quantum electrodynamics

Radiation sensors based on the heating effect of absorbed radiation are typically simple to operate and flexible in terms of input frequency, so they are widely used in gas detection¹, security², terahertz imaging³, astrophysical observations⁴ and medical applications⁵. Several important applications are currently emerging from quantum technology and especially from electrical circuits that behave quantum mechanically, that is, circuit quantum electrodynamics⁶. This field has given rise to single-photon microwave detectors^7-9 and a quantum computer that is superior to classical supercomputers for certain tasks¹⁰. Thermal sensors hold potential for enhancing such devices because they do not add quantum noise and they are smaller, simpler and consume about six orders of magnitude less power than the frequently used travelling-wave parametric amplifiers¹¹. However, despite great progress in the speed¹² and noise levels¹³ of thermal sensors, no bolometer has previously met the threshold for circuit quantum electrodynamics, which lies at a time constant of a few hundred nanoseconds and a simultaneous energy resolution of the order of 10h gigahertz (where h is the Planck constant). Here we experimentally demonstrate a bolometer that operates at this threshold, with a noise-equivalent power of 30 zeptowatts per square-root hertz, comparable to the lowest value reported so far¹³, at a thermal time constant two orders of magnitude shorter, at 500 nanoseconds. Both of these values are measured directly on the same device, giving an accurate estimation of 30h gigahertz for the calorimetric energy resolution. These improvements stem from the use of a graphene monolayer with extremely low specific heat¹⁴ as the active material. The minimum observed time constant of 200 nanoseconds is well below the dephasing times of roughly 100 microseconds reported for superconducting qubits¹⁵ and matches the timescales of currently used readout schemes^16,17, thus enabling circuit quantum electrodynamics applications for bolometers.

Axion Search with a Quantum-Limited Ferromagnetic Haloscope

A ferromagnetic axion haloscope searches for dark matter in the form of axions by exploiting their interaction with electronic spins. It is composed of an axion-to-electromagnetic field transducer coupled to a sensitive rf detector. The former is a photon-magnon hybrid system, and the latter is based on a quantum-limited Josephson parametric amplifier. The hybrid system consists of ten 2.1 mm diameter yttrium iron garnet spheres coupled to a single microwave cavity mode by means of a static magnetic field. Our setup is the most sensitive rf spin magnetometer ever realized. The minimum detectable field is 5.5×10^{-19}  T with 9 h integration time, corresponding to a limit on the axion-electron coupling constant g_{aee}≤1.7×10^{-11} at 95% C.L. The scientific run of our haloscope resulted in the best limit on dark matter axions to electron coupling constant in a frequency span of about 120 MHz, corresponding to the axion-mass range 42.4-43.1  μeV. This is also the first apparatus to perform a wide axion-mass scanning by only changing the static magnetic field.

Thermionic junction devices utilizing phonon blocking

Electrothermal elements are used in various energy harvesters, coolers, and radiation detectors. The optimal operation of these elements relies on mastering two competing boundary conditions: the maximization of the electrothermal response and the blockade of lattice (phonon) thermal conduction. In this work, we propose and demonstrate that efficient electrothermal operation and phonon blocking can be achieved in solid-state thermionic junctions, paving the way for new phonon-engineered high-efficiency refrigerators and sensors. Our experimental demonstration uses semiconductor-superconductor (Sm-S) junctions where the electrothermal response arises from the superconducting energy gap and the phonon blocking results from the acoustic transmission bottleneck at the junction. We demonstrate a cooling platform where a silicon chip, suspended only from the Sm-S junctions, is cooled by ~40% from the bath temperature. We also show how the observed effect can be used in radiation detectors and multistage electronic refrigerators suitable for cooling of quantum technology devices.

Reaching the ultimate energy resolution of a quantum detector

Quantum calorimetry, the thermal measurement of quanta, is a method of choice for ultrasensitive radiation detection ranging from microwaves to gamma rays. The fundamental temperature fluctuations of the calorimeter, dictated by the coupling of it to the heat bath, set the ultimate lower bound of its energy resolution. Here we reach this limit of fundamental equilibrium fluctuations of temperature in a nanoscale electron calorimeter, exchanging energy with the phonon bath at very low temperatures. The approach allows noninvasive measurement of energy transport in superconducting quantum circuits in the microwave regime with high efficiency, opening the way, for instance, to observe quantum jumps, detecting their energy to tackle central questions in quantum thermodynamics.

Thermodynamics of a Phase-Driven Proximity Josephson Junction

We study the thermodynamic properties of a superconductor/normal metal/superconductor Josephson junction in the short limit. Owing to the proximity effect, such a junction constitutes a thermodynamic system where phase difference, supercurrent, temperature and entropy are thermodynamical variables connected by equations of state. These allow conceiving quasi-static processes that we characterize in terms of heat and work exchanged. Finally, we combine such processes to construct a Josephson-based Otto and Stirling cycles. We study the related performance in both engine and refrigerator operating mode.

Heat capacities of thermally manipulated mechanical oscillator at strong coupling

Coherent quantum oscillators are basic physical systems both in quantum statistical physics and quantum thermodynamics. Their realizations in lab often involve solid-state devices sensitive to changes in ambient temperature. We represent states of the solid-state optomechanical oscillator with temperature-dependent frequency by equivalent states of the mechanical oscillator with temperature-dependent energy levels. We interpret the temperature dependence as a consequence of strong coupling between the oscillator and the heat bath. We explore parameter regimes corresponding to anomalous behavior of mechanical and thermodynamic characteristics as a consequence of the strong coupling: (i) The localization and the purification induced by heating, and (ii) the negativity of two generalized heat capacities. The capacities can be used to witness non-linearity in the temperature dependency of the energy levels. Our phenomenological experimentally-oriented approach can stimulate development of new optomechanical and thermomechanical experiments exploring basic concepts of strong coupling thermodynamics.

Thermodynamic cycles in Josephson junctions

A superconductor/normal metal/superconductor Josephson junction is a coherent electron system where the thermodynamic entropy depends on temperature and difference of phase across the weak-link. Here, exploiting the phase-temperature thermodynamic diagram of a thermally isolated system, we argue that a cooling effect can be achieved when the phase drop across the junction is brought from 0 to π in a iso-entropic process. We show that iso-entropic cooling can be enhanced with proper choice of geometrical and electrical parameters of the junction, i.e. by increasing the ratio between supercurrent and total junction volume. We present extensive numerical calculations using quasi-classical Green function methods for a short junction and we compare them with analytical results. Interestingly, we demonstrate that phase-coherent thermodynamic cycles can be implemented by combining iso-entropic and iso-phasic processes acting on the weak-link, thereby engineering the coherent version of thermal machines such as engines and cooling systems. We therefore evaluate their performances and the minimum temperature achievable in a cooling cycle.

Nanobolometer with ultralow noise equivalent power

Since the introduction of bolometers more than a century ago, they have been used in various applications ranging from chemical sensors, consumer electronics, and security to particle physics and astronomy. However, faster bolometers with lower noise are of great interest from the fundamental point of view and to find new use-cases for this versatile concept. We demonstrate a nanobolometer that exhibits roughly an order of magnitude lower noise equivalent power, 20 zW / Hz , than previously reported for any bolometer. Importantly, it is more than an order of magnitude faster than other low-noise bolometers, with a time constant of 30 μs at 60 zW / Hz . These results suggest a calorimetric energy resolution of 0.3 zJ = h × 0.4 THz with a time constant of 30 μs. Further development of this nanobolometer may render it a promising candidate for future applications requiring extremely low noise and high speed such as those in quantum technology and terahertz photon counting.

Flux-tunable heat sink for quantum electric circuits

Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our device consists of two coupled resonators. The first resonator has a high quality factor and a fixed frequency whereas the second resonator is designed to have a low quality factor and a tunable resonance frequency. We engineer the low quality factor using an on-chip resistor and the frequency tunability using a superconducting quantum interference device. When the two resonators are in resonance, the photons in the high-quality resonator can be efficiently dissipated. We show that the corresponding loaded quality factor can be tuned from above 10⁵ down to a few thousand at 10 GHz in good quantitative agreement with our theoretical model.

Observation of microwave absorption and emission from incoherent electron tunneling through a normal-metal-insulator-superconductor junction

We experimentally study nanoscale normal-metal–insulator–superconductor junctions coupled to a superconducting microwave resonator. We observe that bias-voltage-controllable single-electron tunneling through the junctions gives rise to a direct conversion between the electrostatic energy and that of microwave photons. The measured power spectral density of the microwave radiation emitted by the resonator exceeds at high bias voltages that of an equivalent single-mode radiation source at 2.5 K although the phonon and electron reservoirs are at subkelvin temperatures. Measurements of the generated power quantitatively agree with a theoretical model in a wide range of bias voltages. Thus, we have developed a microwave source which is compatible with low-temperature electronics and offers convenient in-situ electrical control of the incoherent photon emission rate with a predetermined frequency, without relying on intrinsic voltage fluctuations of heated normal-metal components or suffering from unwanted losses in room temperature cables. Importantly, our observation of negative generated power at relatively low bias voltages provides a novel type of verification of the working principles of the recently discovered quantum-circuit refrigerator.

Flux-tunable phase shifter for microwaves

We introduce a magnetic-flux-tunable phase shifter for propagating microwave photons, based on three equidistant superconducting quantum interference devices (SQUIDs) on a transmission line. We experimentally implement the phase shifter and demonstrate that it produces a broad range of phase shifts and full transmission within the experimental uncertainty. Together with previously demonstrated beam splitters, this phase shifter can be utilized to implement arbitrary single-qubit gates for qubits based on propagating microwave photons. These results complement previous demonstrations of on-demand single-photon sources and detectors, and hence assist in the pursuit of an all-microwave quantum computer based on propagating photons.

Towards phase-coherent caloritronics in superconducting circuits

The emerging field of phase-coherent caloritronics (from the Latin word calor, heat) is based on the possibility of controlling heat currents by using the phase difference of the superconducting order parameter. The goal is to design and implement thermal devices that can control energy transfer with a degree of accuracy approaching that reached for charge transport by contemporary electronic components. This can be done by making use of the macroscopic quantum coherence intrinsic to superconducting condensates, which manifests itself through the Josephson effect and the proximity effect. Here, we review recent experimental results obtained in the realization of heat interferometers and thermal rectifiers, and discuss a few proposals for exotic nonlinear phase-coherent caloritronic devices, such as thermal transistors, solid-state memories, phase-coherent heat splitters, microwave refrigerators, thermal engines and heat valves. Besides being attractive from the fundamental physics point of view, these systems are expected to have a vast impact on many cryogenic microcircuits requiring energy management, and possibly lay the first stone for the foundation of electronic thermal logic.

High operating temperature in V-based superconducting quantum interference proximity transistors

Here we report the fabrication and characterization of fully superconducting quantum interference proximity transistors (SQUIPTs) based on the implementation of vanadium (V) in the superconducting loop. At low temperature, the devices show high flux-to-voltage (up to 0.52 mV/Φ₀) and flux-to-current (above 12 nA/Φ₀) transfer functions, with the best estimated flux sensitivity ~ 2.6 μΦ₀/(Hz)^1/2 reached under fixed voltage bias, where Φ₀ is the flux quantum. The interferometers operate up to T_bath  \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\simeq $$\end{document}≃ 2 K, with an improvement of 70% of the maximal operating temperature with respect to early SQUIPTs design. The main features of the V-based SQUIPT are described within a simplified theoretical model. Our results open the way to the realization of SQUIPTs that take advantage of the use of higher-gap superconductors for ultra-sensitive nanoscale applications that operate at temperatures well above 1 K.

Continuous-Wave Single-Photon Transistor Based on a Superconducting Circuit

We propose a microwave frequency single-photon transistor which can operate under continuous wave probing and represents an efficient single microwave photon detector. It can be realized using an impedance matched system of a three level artificial ladder-type atom coupled to two microwave cavities connected to input-output waveguides. Using a classical drive on the upper transition, we find parameter space where a single photon control pulse incident on one of the cavities can be fully absorbed into hybridized excited states. This subsequently leads to series of quantum jumps in the upper manifold and the appearance of a photon flux leaving the second cavity through a separate input-output port. The proposal does not require time variation of the probe signals, thus corresponding to a passive version of a single-photon transistor. The resulting device is robust to qubit dephasing processes, possesses low dark count rate for large anharmonicity, and can be readily implemented using current technology.