Substrate Roughness Speeds Up Segmental Dynamics of Thin Polymer Films

Size-dependent vitrification in metallic glasses

Reducing the sample size can profoundly impact properties of bulk metallic glasses. Here, we systematically reduce the length scale of Au and Pt-based metallic glasses and study their vitrification behavior and atomic mobility. For this purpose, we exploit fast scanning calorimetry (FSC) allowing to study glassy dynamics in an exceptionally wide range of cooling rates and frequencies. We show that the main α relaxation process remains size independent and bulk-like. In contrast, we observe pronounced size dependent vitrification kinetics in micrometer-sized glasses, which is more evident for the smallest samples and at low cooling rates, resulting in more than 40 K decrease in fictive temperature, Tf, with respect to the bulk. We discuss the deep implications on how this outcome can be used to convey glasses to low energy states.

Physical Aging of Polystyrene Confined in Anodic Aluminum Oxide Nanopores

We investigated the glassy dynamics of polystyrene (PS) confined in anodic aluminum oxide (AAO) nanopores by differential scanning calorimetry. Based on the outcome of our experiments, we show that the cooling rate applied to process the 2D confined PS melt has a significant impact on both the glass transition and the structural relaxation in the glassy state. A single glass transition temperature (T_g) is observed in quenched samples, while slow-cooled PS chains show two T_gs corresponding to a core-shell structure. The former phenomenon resembles what is observed in freestanding structures, while the latter is imputed to the adsorption of PS onto AAO walls. A more complex picture was drawn for physical aging. In the case of quenched samples, we observed a non-monotonic trend of the apparent aging rate that in 400 nm pores, reaches a value almost twice as larger than what is measured in bulk and decreases upon further confinement in smaller nanopores. For slow-cooled samples, by adequately varying the aging conditions, we were able to control the equilibration kinetics and either separate the two aging processes or induce an intermediate aging regime. We propose a possible explanation of these findings in terms of distribution in free volume and the presence of different aging mechanisms.

New Insights from Nonequilibrium Kinetics Studies on Highly Polar S-Methoxy-PC Infiltrated into Pores

Herein, the annealing of highly polar (S)-(-)-4-methoxymethyl-1,3-dioxolan-2-one (S-methoxy-PC) within alumina and silica porous membranes characterized by different pore diameters was studied by means of dielectric spectroscopy. We found a significant slowing down of the structural dynamics of confined S-methoxy-PC with annealing time below and, surprisingly, also above the glass transition temperatures of the interfacial layer, T_{g,interfacial}. Furthermore, unexpectedly, a change in the slope of temperature dependencies of the characteristic time scale of this process τ_anneal, at T_{g,interfacial} for all confined samples, was reported. By modeling τ_anneal(T), we noted that the observed enormous variation of τ_anneal results from a decrease of the pore radius due to the vitrification of the interfacial molecules. This indicates that the enhanced dynamics of confined materials upon cooling is mainly controlled by the interfacial molecules.

Influence of Surface Roughness on the Dynamics and Crystallization of Vapor-Deposited Thin Films

The substrate roughness is a very important parameter that can influence the properties of supported thin films. In this work, we investigate the effect of surface roughness on the properties of a vapor-deposited glass (celecoxib, CXB) both in its bulk and in confined states. Using dielectric spectroscopy, we provide experimental evidence depicting a profound influence of surface roughness on the α-relaxation dynamics and the isothermal crystallization of this vapor-deposited glass. Besides, we have verified the influence of film confinement on varying values of surface roughnesses as well. At a fixed surface roughness value, the confinement could alter both the dynamics and crystallization of vapor-deposited CXB.

Polymer Nanocomposite Dielectrics: Understanding the Matrix/Particle Interface

Polymer nanocomposite dielectrics possess exceptional electric properties that are absent in the pristine dielectric polymers. The matrix/particle interface in polymer nanocomposite dielectrics is suggested to play decisive roles on the bulk material performance. Herein, we present a critical overview of recent research advances and important insights in understanding the matrix/particle interfacial characteristics in polymer nanocomposite dielectrics. The primary experimental strategies and state-of-the-art characterization techniques for resolving the local property-structure correlation of the matrix/particle interface are dissected in depth, with a focus on the characterization capabilities of each strategy or technique that other approaches cannot compete with. Limitations to each of the experimental strategy are evaluated as well. In the last section of this Review, we summarize and compare the three experimental strategies from multiple aspects and point out their advantages and disadvantages, critical issues, and possible experimental schemes to be established. Finally, the authors' personal viewpoints regarding the challenges of the existing experimental strategies are presented, and potential directions for the interface study are proposed for future research.

Dynamics of Polymer Chains in Poly(ethylene oxide)/Silica Nanocomposites via a Combined Computational and Experimental Approach

The dynamics of polymer chains in poly(ethylene oxide)/silica (PEO/SiO₂) nanoparticle nanohybrids have been investigated via a combined computational and experimental approach involving atomistic molecular dynamics simulations and dielectric relaxation spectroscopy (DRS) measurements. The complementarity of the approaches allows us to study systems with different polymer molecular weights, nanoparticle radii, and compositions across a broad range of temperatures. We study the effects of spatial confinement, which is induced by the nanoparticles, and chain adsorption on the polymer's structure and dynamics. The investigation of the static properties of the nanocomposites via detailed atomistic simulations revealed a heterogeneous polymer density layer at the vicinity of the PEO/SiO₂ interface that exhibited an intense maximum close to the inorganic surface, whereas the bulk density was reached for distances ∼1-1.2 nm away from the nanoparticle. For small volume fractions of nanoparticles, the polymer dynamics, probed by the atomistic simulations of low-molecular-weight chains at high temperatures, are consistent with the presence of a thin adsorbed layer that exhibits slow dynamics, with the dynamics far away from the nanoparticle being similar to those in the bulk. However, for high volume fractions of nanoparticles (strong confinement), the dynamics of all polymer chains were predicted slower than that in the bulk. On the other hand, similar dynamics were found experimentally for both the local β-process and the segmental dynamics for high-molecular-weight systems measured at temperatures below the melting temperature of the polymer, which were probed by DRS. These differences can be attributed to various parameters, including systems of different molecular weights and nanoparticle states of dispersion, the different temperature range studied by the different methods, the potential presence of a reduced-mobility PEO/SiO₂ interfacial layer that does not contribute to the dielectric spectrum, and the presence of amorphous-crystalline interfaces in the experimental samples that may lead to a different dynamical behaviors of the PEO chains.

Fast equilibration mechanisms in disordered materials mediated by slow liquid dynamics

The rate at which a nonequilibrium system decreases its free energy is commonly ascribed to molecular relaxation processes, arising from spontaneous rearrangements at the microscopic scale. While equilibration of liquids usually requires density fluctuations at time scales quickly diverging upon cooling, growing experimental evidence indicates the presence of a different, alternative pathway of weaker temperature dependence. Such equilibration processes exhibit a temperature-invariant activation energy, on the order of 100 kJ mol^-1. Here, we identify the underlying molecular process responsible for this class of Arrhenius equilibration mechanisms with a slow mode (SAP), universally observed in the liquid dynamics of thin films. The SAP, which we show is intimately connected to high-temperature flow, can efficiently drive melts and glasses toward more stable, less energetic states. Our results show that measurements of liquid dynamics can be used to predict the equilibration rate in the glassy state.

Experimental and Modeling Comparison of the Dynamics of Capped and Freestanding Poly(2-chlorostyrene) Films

Proximity to a nonrepulsive wall is commonly considered to cause slower dynamics, which should lead to greater relaxation times for capped thin polymer films than for bulk melts. To the contrary, here we demonstrate that Al-capped films of poly(2-chlorostyrene) exhibit enhanced dynamics with respect to the bulk, similar to analogous freestanding films. To quantitatively resolve the impact of interfaces on whole film dynamics, we analyzed the experimental data via the Cooperative Free Volume rate model. We found that the interfacial region adjacent to a cap contains an excess of free volume (relative to the bulk) about half of that proximate to a free surface. Employing a useful analogy between confinement and pressure effects, we estimated that the effect of capping an 18 nm freestanding film would be equivalent to applying a pressure increase of 19 MPa.

Heterogeneous Dynamics of Polymer Melts Exerted by Chain Loops Anchored on the Substrate: Insights from Molecular Dynamics Simulation

Understanding polymer-substrate interfacial dynamics at the molecular level is crucial for tailoring the properties of polymer ultrathin films (PUFs). Herein, through coarse-grained molecular dynamics simulation, the effect of length (N_loop) and rigidity (K_loop) of loop chains on the dynamics of linear chains is systematically explored, in which the loop chains are adsorbed on a solid substrate and the linear chains are covered on the loop chains. It is found that there is an optimal K_loop, which strongly confines the motion of the linear chains. Meanwhile, compared to increasing the rigidity of the loop chains, increasing the length of the loop chains can more effectively confine the motion of the linear chains. More interestingly, we observe that the mismatch of the length (ΔN) and rigidity (ΔK) between the loop and linear chains leads to dynamic asymmetry (ΔD_c). The relationship between the ΔN, ΔK, and ΔD_c are found to follow the mathematical expression of ΔD_c ∼ (ΔN)^α(ΔK)^β, in which the values of α and β are around 4.58 and 0.83, separately. Remarkably, using the Gaussian process regression model, we construct a master curve of diffusion coefficient on the segmental and chain length scales of the linear chains as a function of N_loop and K_loop, which is further validated by our simulated prediction. In general, this work provides a fundamental understanding of polymer interfacial dynamics at the molecular level, enlightening some rational principles for manipulating the physical properties of PUFs.

Coupling between Polymer Conformations and Dynamics Near Amorphous Silica Surfaces: A Direct Insight from Atomistic Simulations

The dynamics of polymer chains in the polymer/solid interphase region have been a point of debate in recent years. Its understanding is the first step towards the description and the prediction of the properties of a wide family of commercially used polymeric-based nanostructured materials. Here, we present a detailed investigation of the conformational and dynamical features of unentangled and mildly entangled cis-1,4-polybutadiene melts in the vicinity of amorphous silica surface via atomistic simulations. Accounting for the roughness of the surface, we analyze the properties of the polymer chains as a function of their distance from the silica slab, their conformations and the chain molecular weight. Unlike the case of perfectly flat and homogeneous surfaces, the monomeric translational motion parallel to the surface was affected by the presence of the silica slab up to distances comparable with the extension of the density fluctuations. In addition, the intramolecular dynamical heterogeneities in adsorbed chains were revealed by linking the conformations and the structure of the adsorbed chains with their dynamical properties. Strong dynamical heterogeneities within the adsorbed layer are found, with the chains possessing longer sequences of adsorbed segments ("trains") exhibiting slower dynamics than the adsorbed chains with short ones. Our results suggest that, apart from the density-dynamics correlation, the configurational entropy plays an important role in the dynamical response of the polymers confined between the silica slabs.

Polymers under nanoconfinement: where are we now in understanding local property changes?

Polymers are increasingly being used in applications with nanostructured morphologies where almost all polymer molecules are within a few tens to hundreds of nanometers from some interface. From nearly three decades of study on polymers in simplified nanoconfined systems such as thin films, we have come to understand property changes in these systems as arising from interfacial effects where local dynamical perturbations are propagated deeper into the material. This review provides a summary of local glass transition temperature T_g changes near interfaces, comparing across different types of interfaces: free surface, substrate, liquid, and polymer-polymer. Local versus film-average properties in thin films are discussed, making connections to other related property changes, while highlighting several historically important studies. By experimental necessity, most studies are on high enough molecule weight chains to be well entangled, although aspects that connect to lower molecule weight materials are described. Emphasis is made to identify observations and open questions that have yet to be fully understood such as the evidence of long-ranged interfacial effects, finite domain size, interfacial breadth, and chain connectivity.

1D-Confinement Inhibits the Anomaly in Secondary Relaxation of a Fluorinated Polymer

We present an experimental study of the dynamics of a well-pronounced secondary relaxation observed in bulk and ultrathin films of the fluorinated copolymer poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP). In proximity to the glass transition, an anomalous phenomenon is observed: the β-relaxation slows down upon heating. Measurements as a function of the film thickness show that this exceptional behavior gradually vanishes upon confinement at the nanoscale level. Regardless of sample size, the relaxation dynamics could be described in terms of the Minimal Model via an asymmetric double well potential. Supported by a structural investigation of surfaces and interfaces, our results reveal that the presence of adsorbing walls induces an increase in glass transition temperature, which counterbalances the asymmetry in the double well potential responsible for molecular motion.

Local structure and molecular dynamics of highly polar propylene carbonate derivative infiltrated within alumina and silica porous templates

Herein, we examined the effect of finite size and wettability on the structural dynamics and the molecular arrangement of the propylene carbonate derivative, (S)-(-)-4-methoxymethyl-1,3-dioxolan-2-one (assigned as s-methoxy-PC), incorporated into alumina and silica porous templates of pore diameters d = 4 nm-10 nm using Raman and broadband dielectric spectroscopy, differential scanning calorimetry, and x-ray diffraction. It was demonstrated that only subtle changes in the molecular organization and short-range order of confined s-methoxy-PC molecules were detected. Yet, a significant deviation of the structural dynamics and depression of the glass transition temperatures, T_g, was found for all confined samples with respect to the bulk material. Interestingly, these changes correlate with neither the finite size effects nor the interfacial energy but seem to vary with wettability, generally. Nevertheless, for s-methoxy-PC infiltrated into native (more hydrophilic) and modified (more hydrophobic) silica templates of the same nanochannel size (d = 4 nm), a change in the dynamics and T_g was negligible despite a significant variation in wettability. These results indicated that although wettability might be a suitable variable to predict alteration of the structural dynamics and depression of the glass transition temperature, other factors, i.e., surface roughness and the density packing, might also have a strong contribution to the observed confinement effects.

Unique Behavior of Poly(propylene glycols) Confined within Alumina Templates Having a Nanostructured Interface

Herein we show that the nanostructured interface obtained via modulation of the pore size has a strong impact on the segmental and chain dynamics of two poly(propylene glycol) (PPG) derivatives with various molecular weights (Mn = 4000 g/mol and Mn = 2000 g/mol). In fact, a significant acceleration of the dynamics was observed for PPG infiltrated into ordinary alumina templates (Dp = 36 nm), while bulklike behavior was found for samples incorporated into membranes of modulated diameter (19 nm < Dp < 28 nm). We demostrated that the modulation-induced roughness reduces surface interactions of polymer chains near the interface with respect to the ones adsorbed to the ordinary nanochannels. Interestingly, this effect is noted despite the enhanced wettability of PPG in the latter system. Consequently, as a result of weaker H-bonding surface interactions, the conformation of segments seems to locally mimic the bulk arrangement, leading to bulklike dynamics, highlighting the crucial impact of the interface on the overall behavior of confined materials.

To Understand Film Dynamics Look to the Bulk

We show that shifts in dynamics of confined systems relative to that of the bulk material originate in the properties of bulk alone, and exhibit the same form of behavior as when different bulk isobars are compared. For bulk material, pressure-dependent structural relaxation times follow τ(T,V)∝exp[f(T)×g(V)]. When two states (isobars) of the material, "1" and "2", are compared at the same temperature this leads to a form τ_{2}∝τ_{1}^{c}, where c=g[V_{2}(T)]/g[V_{1}(T)]. Using equation of state analysis and two models for P-dependent dynamics, we show that c is approximately T independent, and that it can be very simply expressed in terms of either the (free) volume above the close packed state (V_{free}) or the activation energy for cooperative motion. The effect of changing state through a shift in pressure (P_{1} to P_{2}) is thus mechanistically traceable to cooperativity changing with density, through V_{free}. The connection with confined dynamics follows when 1 and 2 are taken as bulk and film at ambient P, differing in density only due to the film surface. The general form for τ(T,V) also illuminates why samples in different states (film vs bulk, high P vs low) trend toward the same relaxation behavior at high T.

Irreversible adsorption of polymer melts and nanoconfinement effects

For almost a decade, growing experimental evidence has revealed a strong correlation between the properties of nanoconfined polymers and the number of chains irreversibly adsorbed onto nonrepulsive interfaces, e.g. the supporting substrate of thin polymer coatings, or nanofillers dispersed in polymer melts. Based on such a correlation, it has already been possible to tailor structural and dynamics properties - such as the glass transition temperature, the crystallization rate, the thermal expansion coefficients, the viscosity and the wettability - of nanomaterials by controlling the adsorption kinetics. This evidence indicates that irreversible adsorption affects nanoconfinement effects. More recently, also the opposite phenomenon was experimentally observed: nanoconfinement alters interfacial interactions and, consequently, also the number of chains adsorbed in equilibrium conditions. In this review we discuss this intriguing interplay between irreversible adsorption and nanoconfinement effects in ultrathin polymer films. After introducing the methods currently used to prepare adsorbed layers and to measure the number of irreversibly adsorbed chains, we analyze the models employed to describe the kinetics of adsorption in polymer melts. We then discuss the structure of adsorbed polymer layers, focusing on the complex macromolecular architecture of interfacial chains and on their thermal expansion; we examine the way in which the structure of the adsorbed layer affects the thermal glass transition temperature, vitrification, and crystallization. By analyzing segmental dynamics of 1D confined systems, we describe experiments to track the changes in density during adsorption. We conclude this review with an analysis of the impact of nanoconfinement on adsorption, and a perspective on future work where we also address the key ideas of irreversibility, equilibration and long-range interactions.

High-pressure experiments as a novel perspective to study the molecular dynamics of glass-forming materials confined at the nanoscale

Herein, we report the pioneering high-pressure dielectric studies on the dynamics of a model van der Waals glass-forming liquid bisphenol-A diglycidyl ether (DGEBA) infiltrated into anodic aluminum oxide (AAO) templates of the mean pore sizes, d = 150 and d = 18 nm. It was found that although the shape of the structural relaxation process varies with the confinement, it remains constant under varying thermodynamic conditions for a given pore diameter. Consequently, the time-temperature-pressure (TTP) rule satisfied for the majority of bulk substances is also obeyed for the spatially restricted liquid. We have also shown for the first time that there is a decoupling between the core and interfacial mobility at elevated pressure. Moreover, it was noted that the structural dynamics of the former fraction of molecules becomes systematically shorter with respect to the bulk DGEBA during the compression. The enhanced structural dynamics of the core material, as well as the varying pressure coefficients of the glass transition temperature of the interfacial and core molecules, have been discussed in the context of a distinct evolution in their free volume/density packing with respect to the bulk DGEBA, and a change in the interfacial tension, which may lead to the enhanced wettability of the liquid adsorbed onto the pore walls under different thermodynamic conditions. The performed high-pressure measurements offer novel perspectives to explore the combination of two different effects, compression and confinement, which might be a breakthrough in the study of the glass transition phenomenon and the behavior of soft materials confined at the nanoscale.