Helfrich repulsion and dynamical phase separation of multicomponent lipid bilayers

Advanced quantification for single-cell adhesion by variable-angle TIRF nanoscopy

Over the last decades, several techniques have been developed to study cell adhesion; however, they present significant shortcomings. Such techniques mostly focus on strong adhesion related to specific protein-protein associations, such as ligand-receptor binding in focal adhesions. Therefore, weak adhesion, related to less specific or nonspecific cell-substrate interactions, are rarely addressed. Hence, we propose in this work a complete investigation of cell adhesion, from highly specific to nonspecific adhesiveness, using variable-angle total internal reflection fluorescence (vaTIRF) nanoscopy. This technique allows us to map in real time cell topography with a nanometric axial resolution, along with cell cortex refractive index. These two key parameters allow us to distinguish high and low adhesive cell-substrate contacts. Furthermore, vaTIRF provides cell-substrate binding energy, thus revealing a correlation between cell contractility and cell-substrate binding energy. Here, we highlight the quantitative measurements achieved by vaTIRF on U87MG glioma cells expressing different amounts of α ₅ integrins and distinct motility on fibronectin. Regarding integrin expression level, data extracted from vaTIRF measurements, such as the number and size of high adhesive contacts per cell, corroborate the adhesiveness of U87MG cells as intended. Interestingly enough, we found that cells overexpressing α ₅ integrins present a higher contractility and lower adhesion energy.

Integrin-Functionalised Giant Unilamellar Vesicles via Gel-Assisted Formation: Good Practices and Pitfalls

Giant unilamellar vesicles (GUV) are powerful tools to explore physics and biochemistry of the cell membrane in controlled conditions. For example, GUVs were extensively used to probe cell adhesion, but often using non-physiological linkers, due to the difficulty of incorporating transmembrane adhesion proteins into model membranes. Here we describe a new protocol for making GUVs incorporating the transmembrane protein integrin using gel-assisted swelling. We report an optimised protocol, enumerating the pitfalls encountered and precautions to be taken to maintain the robustness of the protocol. We characterise intermediate steps of small proteoliposome formation and the final formed GUVs. We show that the integrin molecules are successfully incorporated and are functional.

On the control of dispersion interactions between biological membranes and protein coated biointerfaces

HYPOTHESIS

Interaction of cellular membranes with biointerfaces is of vital importance for a number of medical devices and implants. Adhesiveness of these surfaces and cells is often regulated by depositing a layer of bovine serum albumin (BSA) or other protein coatings. However, anomalously large separations between phospholipid membranes and the biointerfaces in various conditions and buffers have been observed, which could not be understood using available theoretical arguments.

METHODS

Using the Lifshitz theory, we here evaluate the distance-dependent Hamaker coefficient describing the dispersion interaction between a biointerface and a membrane to understand the relative positioning of two surfaces. Our theoretical modeling is supported by experiments where the biointerface is represented by a glass substrate with deposited BSA and protein layers. These biointerfaces are allowed to interact with giant unilamellar vesicles decorated with polyethylene glycol (PEG) using PEG lipids to mimic cellular membranes and their pericellular coat.

RESULTS

We demonstrate that careful treatment of the van der Waals interactions is critical for explaining the lack of adhesiveness of the membranes with protein-decorated biointerfaces. We show that BSA alone indeed passivates the glass, but depositing an additional protein layer on the surface BSA, or producing multiple layers of proteins and BSA results in repulsive dispersion forces responsible for 100 nm large equilibrium separations between the two surfaces.

Active tympanic tuning facilitates sound localization in animals with internally coupled ears

Earlier studies have reported that numerous vertebrate taxa have skeletal muscle(s) attaching directly, or indirectly, onto the tympanic membrane. The present study links these prior studies by quantitatively modeling the influence of skeletal muscle contraction on tympanic tension, tympanic dampening, and, ultimately, the fundamental frequency. In this way, the efficacy of these tympanic muscles to dynamically alter the sensory response of the vertebrate ear is quantified. Changing the tension modifies the eardrum's fundamental frequency, a key notion in understanding hearing through internally coupled ears (ICE) as used by the majority of terrestrial vertebrates. Tympanic tension can also be modulated by altering the pressure acting on the deep (medial) surface of the tympanum. Herein we use the monitor lizard Varanus as an example to demonstrate how active modulation of the pharyngeal volume permits tuning of an ICE auditory system. The present contribution offers a behaviorally and biologically realistic perspective on the ICE system, by demonstrating how an organism can dynamically alter its morphology to tune the auditory response. Through quantification of the relationships between tympanic surface tension, damping, membrane fundamental frequency, and auditory cavity volume, it can be shown that an ICE system affords a biologically relevant range of tuning.

Statistical Mechanics of an Elastically Pinned Membrane: Equilibrium Dynamics and Power Spectrum

In biological settings, membranes typically interact locally with other membranes: the extracellular matrix in the exterior or internal cellular structures such as the cytoskeleton, locally pinning the membrane. Characterizing the dynamical properties of such interactions presents a difficult task. Significant progress has been achieved through simulations and experiments, yet analytical progress in modeling pinned membranes has been impeded by the complexity of governing equations. Here, we circumvent these difficulties by calculating analytically the time-dependent Green's function of the operator governing the dynamics of an elastically pinned membrane in a hydrodynamic surrounding and subject to external forces. This enables us to calculate the equilibrium power spectral density for an overdamped membrane pinned by an elastic, permanently attached spring subject to thermal excitations. By considering the effects of the finite experimental resolution on the measured spectra, we show that the elasticity of the pinning can be extracted from the experimentally measured spectrum. Membrane fluctuations can thus be used as a tool to probe mechanical properties of the underlying structures. Such a tool may be particularly relevant in the context of cell mechanics, in which the elasticity of the membrane's attachment to the cytoskeleton could be measured.

Nanometric thermal fluctuations of weakly confined biomembranes measured with microsecond time-resolution

We probe the bending fluctuations of bio-membranes using highly deflated giant unilamellar vesicles (GUVs) bound to a substrate by a weak potential arising from generic interactions. The substrate is either homogeneous, with GUVs bound only by the weak potential, or is chemically functionalized with a micro-pattern of very strong specific binders. In both cases, the weakly adhered membrane is seen to be confined at a well-defined distance above the surface while it continues to fluctuate strongly. We quantify the fluctuations of the weakly confined membrane at the substrate proximal surface as well as of the free membrane at the distal surface of the same GUV. This strategy enables us to probe in detail the damping of fluctuations in the presence of the substrate, and to independently measure the membrane tension and the strength of the generic interaction potential. Measurements were done using two complementary techniques - dynamic optical displacement spectroscopy (DODS, resolution: 20 nm, 10 μs), and dual wavelength reflection interference contrast microscopy (DW-RICM, resolution: 4 nm, 50 ms). After accounting for the spatio-temporal resolution of the techniques, an excellent agreement between the two measurements was obtained. For both weakly confined systems we explore in detail the link between fluctuations on the one hand and membrane tension and the interaction potential on the other hand.

Nanoscale characterization of vesicle adhesion by normalized total internal reflection fluorescence microscopy

We recently proposed a straightforward fluorescence microscopy technique to study adhesion of Giant Unilamellar Vesicles. This technique is based on dual observations which combine epi-fluorescence microscopy and total internal reflection fluorescence (TIRF) microscopy: TIRF images are normalized by epi-fluorescence ones. By this way, it is possible to map the membrane/substrate separation distance with a nanometric resolution, typically ~20 nm, with a maximal working range of 300-400 nm. The purpose of this paper is to demonstrate that this technique is useful to quantify vesicle adhesion from ultra-weak to strong membrane-surface interactions. Thus, we have examined unspecific and specific adhesion conditions. Concerning unspecific adhesion, we have controlled the strength of electrostatic forces between negatively charged vesicles and various functionalized surfaces which exhibit a positive or a negative effective charge. Specific adhesion was highlighted with lock-and-key forces mediated by the well defined biotin/streptavidin recognition.

Generic Role of Polymer Supports in the Fine Adjustment of Interfacial Interactions between Solid Substrates and Model Cell Membranes

To understand the generic role of soft, hydrated biopolymers in adjusting interfacial interactions at biological interfaces, we designed a defined model of the cell-extracellular matrix contacts based on planar lipid membranes deposited on polymer supports (polymer-supported membranes). Highly uniform polymer supports made out of regenerated cellulose allow for the control of film thickness without changing the surface roughness and without osmotic dehydration. The complementary combination of specular neutron reflectivity and high-energy specular X-ray reflectivity yields the equilibrium membrane-substrate distances, which can quantitatively be modeled by computing the interplay of van der Waals interaction, hydration repulsion, and repulsion caused by the thermal undulation of membranes. The obtained results help to understand the role of a biopolymer in the interfacial interactions of cell membranes from a physical point of view and also open a large potential to generally bridge soft, biological matter and hard inorganic materials.

Physics of cell adhesion: some lessons from cell-mimetic systems

Cell adhesion is a paradigm of the ubiquitous interplay of cell signalling, modulation of material properties and biological functions of cells. It is controlled by competition of short range attractive forces, medium range repellant forces and the elastic stresses associated with local and global deformation of the composite cell envelopes. We review the basic physical rules governing the physics of cell adhesion learned by studying cell-mimetic systems and demonstrate the importance of these rules in the context of cellular systems. We review how adhesion induced micro-domains couple to the intracellular actin and microtubule networks allowing cells to generate strong forces with a minimum of attractive cell adhesion molecules (CAMs) and to manipulate other cells through filopodia over micrometer distances. The adhesion strength can be adapted to external force fluctuations within seconds by varying the density of attractive and repellant CAMs through exocytosis and endocytosis or protease-mediated dismantling of the CAM-cytoskeleton link. Adhesion domains form local end global biochemical reaction centres enabling the control of enzymes. Actin-microtubule crosstalk at adhesion foci facilitates the mechanical stabilization of polarized cell shapes. Axon growth in tissue is guided by attractive and repulsive clues controlled by antagonistic signalling pathways.

Early contacts between T lymphocytes and activating surfaces

Cells continually probe their environment to adapt their behaviour. A current challenge is to determine how they analyse nearby surfaces and how they process information to take decisions. We addressed this problem by monitoring human T lymphocyte attachment to surfaces coated with activating anti-CD3 or control anti-HLA antibodies. Interference reflection microscopy allowed us to monitor cell-to-surface apposition with a few nanometre vertical resolution during the first minutes following contact. We found that (i) when a cell fell on a surface, contact extension was preceded by a lag of several tens of seconds. (ii) During this lag, vertical membrane undulations seemed to generate transient contacts with underlying surfaces. (iii) After the lag period, the contact area started increasing linearly with a rate of about 1.5 µm(2) s(-1) on activating surfaces and about 0.2 µm(2) s(-1) on control surfaces. (iv) Concomitantly with lateral surface extension, the apparent distance between cell membranes and surfaces steadily decreased. These results are consistent with the hypothesis that the cell decision to spread rapidly on activating surfaces resulted from the integration of information yielded by transient contacts with these surfaces generated by membrane undulations during a period of about 1 min.

Quantitative reflection interference contrast microscopy (RICM) in soft matter and cell adhesion

Adhesion can be quantified by measuring the distance between the interacting surfaces. Reflection interference contrast microscopy (RICM), with its ability to measure inter-surface distances under water with nanometric precision and milliseconds time resolution, is ideally suited to studying the dynamics of adhesion in soft systems. Recent technical developments, which include innovative image analysis and the use of multi-coloured illumination, have led to renewed interest in this technique. Unambiguous quantitative measurements have been achieved for colloidal beads and model membranes, thus revealing new insights and applications. Quantification of data from cells shows exciting prospects. Herein, we review the basic principles and recent developments of RICM applied to studies of dynamical adhesion processes in soft matter and cell biology and provide practical hints to potential users.

New modeling of reflection interference contrast microscopy including polarization and numerical aperture effects: application to nanometric distance measurements and object profile reconstruction

We have developed a new and improved optical model of reflection interference contrast microscopy (RICM) to determine with a precision of a few nanometers the absolute thickness h of thin films on a flat surface in immersed conditions. The model takes into account multiple reflections between a planar surface and a multistratified object, finite aperture illumination (INA), and, for the first time, the polarization of light. RICM intensity I is typically oscillating with h. We introduce a new normalization procedure that uses the intensity extrema of the same oscillation order for both experimental and theoretical intensity values and permits us to avoid significant error in the absolute height determination, especially at high INA. We also show how the problem of solution degeneracy can be solved by taking pictures at two different INA values. The model is applied to filled polystyrene beads and giant unilamellar vesicles of radius 10-40 microm sitting on a glass substrate. The RICM profiles I(h) can be fitted for up to two to three oscillation orders, and extrema positions are correct for up to five to seven oscillation orders. The precision of the absolute distance and of the shape of objects near a substrate is about 5 nm in a range from 0 to 500 nm, even under large numerical aperture conditions. The method is especially valuable for dynamic RICM experiments and with living cells where large illumination apertures are required.

Progress in mimetic studies of cell adhesion and the mechanosensing

Vesicle-substrate adhesion has been studied for over two decades with the motivation to understand and mimic cell adhesion. In recent years, with progress in theoretical modelling, the development of experimental techniques, and improved data-analysis procedures, considerable advances have been made in the understanding of the adhesion process. It is this progress which constitutes the focus of this review.

How cells tiptoe on adhesive surfaces before sticking

Cell membranes are studded with protrusions that were thoroughly analyzed with electron microscopy. However, the nanometer-scale three-dimensional motions generated by cell membranes to fit the topography of foreign surfaces and initiate adhesion remain poorly understood. Here, we describe the dynamics of surface deformations displayed by monocytic cells bumping against fibronectin-coated surfaces. We observed membrane undulations with typically 5 nm amplitude and 5-10 s lifetime. Cell membranes behaved as independent units of micrometer size. Cells detected the presence of foreign surfaces at 50 nm separation, resulting in time-dependent amplification of membrane undulations. Molecular contact then ensued with apparent cell-membrane separation of 30-40 nm, and this distance steadily decreased during the following tens of seconds. Contact maturation was associated with in-plane egress of bulky molecules and robust membrane fluctuations. Thus, membrane undulations may be the major determinant of cell sensitivity to substrate topography, outcome of interaction, and initial kinetics of contact extension.

Vesicles as a model for controlled (de-)adhesion of cells: a thermodynamic approach

We review the specific adhesion between ligand-containing vesicles and receptor-functionalized substrates as an established model system used to study the cell recognition process and its control mechanisms. In order to provide better understanding of the underlying physics and to allow for quantitative exploitation of this system, we develop a simple theoretical framework that accounts for the equilibrium state of adhesion and successfully merges the macroscopic and microscopic aspects of the problem. Several mechanisms that are used to control adhesion or induce de-adhesion are studied on the same level of theory. Specifically, the repelling properties of adhesive molecules, the role of repelling molecules, the action of antagonists for a specific binder as well as the influence of an externally applied force are addressed independently within the same formalism.

Spreading of neutrophils: from activation to migration

Neutrophils rely on rapid changes in morphology to ward off invaders. Time-resolved dynamics of spreading human neutrophils after activation by the chemoattractant fMLF (formyl methionyl leucyl phenylalanine) was observed by RICM (reflection interference contrast microscopy). An image-processing algorithm was developed to identify the changes in the overall cell shape and the zones of close contact with the substrate. We show that in the case of neutrophils, cell spreading immediately after exposure of fMLF is anisotropic and directional. The dependence of spreading area, A, of the cell as a function of time, t, shows several distinct regimes, each of which can be fitted as power laws (A ~ t(b)). The different spreading regimes correspond to distinct values of the exponent b and are related to the adhesion state of the cell. Treatment with cytochalasin-B eliminated the anisotropy in the spreading.

Brownian motion of nucleated cell envelopes impedes adhesion

We demonstrate that composite envelopes of nucleated cells exhibit pronounced short wavelength (<or=0.5 microm) bending excitations of approximately 10 nm root mean square amplitudes at physiological temperatures, which impede strong adhesion due to entropic repulsion forces. Quantitative microinterferometric analysis of the dynamic cell surface roughness of macrophages in terms of the theory of statistical surfaces suggests that the membrane excitations are mainly thermally driven Brownian motions (although active driving forces may contribute substantially). We determine the effective bending modulus of the cell envelope (approximately 1000kBT), the cortical tension (approximately 10(-4) N m-1), and the work of adhesion (approximately 10(-5) J m-2).

Molecular Organization and Signal Transduction at Intermembrane Junctions

Surfaces create an environment in which multiple forces conspire together to yield a wealth of complex chemical processes. This is especially true of cell membranes, whose fluidity and flexibility enables responsive feedback with surface chemical interactions in ways not generally seen with inorganic materials. Spatial pattern formation of cell-surface proteins at intermembrane junctions provides many beautiful examples of these phenomena, and is also emerging as a functional aspect of intercellular signaling. Correspondingly, the study of interactions of cell-membrane surfaces is attracting significant attention from cell biologists and physical chemists alike. This convergence is fueled be recent, exquisite observations of protein pattern formation events within living immunological synapses along with parallel advances in membrane reconstitution, manipulation, and imaging technologies.

Absolute interfacial distance measurements by dual-wavelength reflection interference contrast microscopy

Dual-wavelength reflection interference contrast microscopy (DW-RICM) is established as a microinterferometric technique to measure absolute optical distances between transparent planar substrates and hard or soft surfaces such as colloidal beads or artificial and biological membranes, which hover over the substrate. In combination with a fast image processing algorithm the technique was applied to analyze the trajectories of colloidal beads sedimenting under gravity. As the beads approach the surface of the substrate, they slow down because of hydrodynamic coupling of the bead motion to the substrate. The effective surface friction coefficients were measured as a function of the absolute distance of the beads from the surface. The height dependence of the friction coefficient was found to be in quantitative agreement with previous theoretical predictions. Furthermore, we demonstrate that the DW-RICM technique allows the determination of the height of membranes above substrates and the amplitude and direction of height fluctuations. Without any further need to label the membrane the unambiguous reconstruction of the surface profile of soft surfaces is possible.

Effect of acyl chain mismatch on the contact mechanics of two-component phospholipid vesicle during main phase transition

It has been recently demonstrated that acyl chain mismatch of phospholipid bilayer composed of a binary lipid mixture induces component formation on the lateral plane of the bilayer [Biophys. J. 83 (2002) 1820-1883]. In this report, the contact mechanics of unilamellar vesicles composed of binary dimyristoyl-phosphatidylcholine (DMPC)/dipalmitoyl-phosphocholine (DPPC) mixtures on fused silica and amino-modified substrates is simultaneously probed by confocal-reflectance interference contrast microscopy (C-RICM) and cross-polarized light microscopy during gel to liquid crystalline transition of the lipid bilayer. C-RICM results indicate that the average degree of vesicle deformation for DMPC-rich and DPPC-rich vesicles adhering on fused silica substrate is increased by 30% and 14%, respectively, in comparison with that in pure DMPC and DPPC vesicles. Also, lateral heterogeneity induced by acyl chain mismatch increases the average magnitude of adhesion energy in DMPC-rich and DPPC-rich vesicles of all sizes by 6.4 times and 2.3 times, respectively. Similar modulation of adhesion mechanics induced by carbon chain difference is obtained on amino-modified substrate. Most importantly, the thermotropic transition of the mixed bilayer from gel (below T(m)) to fluid phase (above T(m)) further exemplifies the effect of acyl chain mismatch on the increases of degree of vesicle deformation and adhesion energy.

Interaction of liposome with immobilized chitosan during main phase transition

It has been recently demonstrated that chitosan in aqueous solution alters the phase behavior and structure of a phospholipid bilayer (Fang, N.; et al. Biomacromolecules 2001, 2, 1161-1168). Until now, the physical driving forces between chitosan and the phospholipid bilayer upon their initial encounter remains unknown. In this study, confocal reflectance interference contrast microscopy (C-RICM), phase contrast microscopy and bioadhesion modeling are concurrently applied to probe the interaction of phospholipid vesicle with immobilized chitosan at various temperatures, pH, and osmotic stress. First, the successful immobilization of chitosan on amino-silanized glass is indicated by the increases in both the degree of vesicle deformation and adhesion energy of vesicles adhering on chitosan modified substrate in comparison with those on amino-silanized glass. Second, the phase transition of a phospholipid bilayer does not modulate the adhesion strength at the chitosan-biomembrane interface at pH 7.4. With increase of the degree of protonation on the chitsoan backbone at pH 4, the adhesion energy is increased by 5-fold for vesicles of all sizes compared to that in pH 7.4. Furthermore, pH reduction amplifies the thermal-induced response of larger vesicles on the immobilized chitosan layer. Interestingly, a moderate increase of osmotic stress maximizes the degree of vesicle deformation and adhesion energy at 23 degrees C and dampens the effect of phase transition on vesicle adhesion. Overall, this study demonstrates the quantitation of chitosan-biomembrane interactions that will be critical for future applications of chitosan in biological systems.

Dynamic phase separation of fluid membranes with rigid inclusions

Membrane shape fluctuations induce attractive interactions between rigid inclusions. Previous analytical studies showed that the fluctuation-induced pair interactions are rather small compared to thermal energies, but also that multibody interactions cannot be neglected. In this paper, it is shown numerically that shape fluctuations indeed lead to the dynamic separation of the membrane into phases with different inclusion concentrations. The tendency of lateral phase separation strongly increases with the inclusion size. Large inclusions aggregate at very small inclusion concentrations and for relatively small values of the inclusions' elastic modulus.