Quantitative 4D X-ray microtomography under extreme conditions: a case study on magma migration

Deformation of two-phase aggregates with in situ X-ray tomography in rotating Paris-Edinburgh cell at GPa pressures and high temperature

High-pressure (>1 GPa) torsion apparatus can be coupled with in situ X-ray tomography (XRT) to study microstructures in materials associated with large shear strains. Here, deformation experiments were carried out on multi-phase aggregates at ∼3-5 GPa and ∼300-500°C, using a rotational tomography Paris-Edinburgh press (RoToPEc) with in situ absorption contrast XRT on the PSICHE beamline at Synchrotron SOLEIL. The actual shear strain reached in the samples was quantified with respect to the anvil twisting angles, which is γ ≤ 1 at 90° anvil twist and reaches γ ≃ 5 at 225° anvil twist. 2D and 3D quantifications based on XRT that can be used to study in situ the deformation microfabrics of two-phase aggregates at high shear strain are explored. The current limitations for investigation in real time of deformation microstructures using coupled synchrotron XRT with the RoToPEc are outlined.

Recent Developments of High-Pressure Spark Plasma Sintering: An Overview of Current Applications, Challenges and Future Directions

Spark plasma sintering (SPS), also called pulsed electric current sintering (PECS) or field-assisted sintering technique (FAST) is a technique for sintering powder under moderate uniaxial pressure (max. 0.15 GPa) and high temperature (up to 2500 °C). It has been widely used over the last few years as it can achieve full densification of ceramic or metal powders with lower sintering temperature and shorter processing time compared to conventional processes, opening up new possibilities for nanomaterials densification. More recently, new frontiers of opportunities are emerging by coupling SPS with high pressure (up to ~10 GPa). A vast exciting field of academic research is now using high-pressure SPS (HP-SPS) in order to play with various parameters of sintering, like grain growth, structural stability and chemical reactivity, allowing the full densification of metastable or hard-to-sinter materials. This review summarizes the various benefits of HP-SPS for the sintering of many classes of advanced functional materials. It presents the latest research findings on various HP-SPS technologies with particular emphasis on their associated metrologies and their main outstanding results obtained. Finally, in the last section, this review lists some perspectives regarding the current challenges and future directions in which the HP-SPS field may have great breakthroughs in the coming years.

In situ characterization of liquids at high pressure combining X-ray tomography, X-ray diffraction and X-ray absorption using the white beam station at PSICHÉ

A novel experimental setup dedicated to the study of liquid and amorphous materials, on the white beam station of the PSICHÉ beamline at SOLEIL, is described. The Beer-Lambert absorption method has been developed using a broad-spectrum (white) incident beam for in situ density measurements at extreme conditions of pressure and temperature. This technique has been combined with other existing X-ray techniques (radiographic imaging, tomography and combined angle energy dispersive X-ray diffraction). Such a multi-technical approach offers new possibilities for the characterization of liquid and amorphous materials at high pressure and high temperature. The strength of this approach is illustrated by density measurements of liquid gallium at pressures up to 4 GPa, combining the three independent X-ray techniques (the Beer-Lambert absorption method, tomography and X-ray diffraction).