Energy Harvesting through Floor Tiles

Response Surface Methodology Analysis of Energy Harvesting System over Pathway Tiles

This paper presents an experimental analysis of the optimization of PZT-based tiles for energy harvesting. The hardware (actual experiment), PZT-based tiles, were developed using 6 × 6 piezoelectric (PZT-lead zirconate titanate) sensors of 40 mm in diameter on a hard cardboard sheet (300 × 300 mm²). Our experimental analysis of the designed tiles obtained an optimized power of 3.626 mW (85 kg or 0.83 kN using 36 sensors) for one footstep and 0.9 mW for 30 footsteps at high tapping frequency. Theoretical analysis was conducted with software (Design-Expert) using the response surface methodology (RSM) for optimized PZT tiles, obtaining a power of 6784.155 mW at 150 kg or 1.47 kN weight using 34 sensors. This software helped to formulate the mathematical equation for the most suitable PZT tile model for power optimization. It used the quadratic model to provide adjusted and predicted R2 values of 0.9916 and 0.9650, respectively. The values were less than 0.2 apart, which indicates a high correlation between the actual and predicted values. The outcome of the various experiments can help with the selection of input factors for optimized power during pavement design.

A Systematic Review of Piezoelectric Materials and Energy Harvesters for Industrial Applications

In the last three decades, smart materials have become popular. The piezoelectric materials have shown key characteristics for engineering applications, such as in sensors and actuators for industrial use. Because of their excellent mechanical-to-electrical and vice versa energy conversion properties, piezoelectric materials with high piezoelectric charge and voltage coefficient have been tested in renewable energy applications. The fundamental component of the energy harvester is the piezoelectric material, which, when subjected to mechanical vibrations or applied stress, induces the displaced ions in the material and results in a net electric charge due to the dipole moment of the unit cell. This phenomenon builds an electric potential across the material. In this review article, a detailed study focused on the piezoelectric energy harvesters (PEH’s) is reported. In addition, the fundamental idea about piezoelectric materials, along with their modeling for various applications, are detailed systematically. Then a summary of previous studies based on PEH’s other applications is listed, considering the technical aspects and methodologies. A discussion has been provided as a critical review of current challenges in this field. As a result, this review can provide a guideline for the scholars who want to use PEH’s for their research.