Biocompatible Multilayered Encapsulation for Organic Light-Emitting Diodes

Organic light-emitting diodes (OLEDs) have tremendous potential in biotechnology, but their vulnerability to oxygen and moisture presents a significant challenge in encapsulation. In this study, we developed a multilayer thin-film encapsulation consisting of dual inorganic layers and Parylene-C, offering excellent protection and biocompatibility. This encapsulation enhances the suitability of OLEDs for flexible substrates and biological applications. The multilayer structure, composed of Al2O3/SiOxNy/Parylene-C, was fabricated entirely below 100 °C to ensure compatibility with temperature-sensitive OLEDs. The encapsulation also exhibited high transparency in the visible spectrum, making it ideal for top-emission OLEDs. We confirmed the stability of the OLED by immersing it in a biologically relevant environment, specifically 37 °C PBS solution, and demonstrated its excellent durability. Through direct cell growth experiments and MTT assay tests, the multilayer encapsulated OLEDs demonstrated high biocompatibility. To advance this work toward optogenetic applications, we fabricated flexible OLED-sensing electrode integrated devices on a polyimide substrate, incorporating 13 sensing electrodes and 12 OLEDs. The Al2O3/SiOxNy/Parylene-C encapsulation provided sufficient stability during the selective etching of the sensing electrode region while maintaining OLED protection. The device demonstrated stable operation after immersion in PBS at 37 °C and supported direct cell growth on its surface. Additionally, the OLED arrays remained well functional even when the polyimide substrate was bent. These results highlight the potential of our flexible OLED-sensing electrode integrated device as a promising platform for future optogenetic applications.

Advancing Cancer Treatment and Diagnosis: A Review on Photodynamic Therapy Using OLED Technology

Photodynamic therapy (PDT) is an innovative and non-invasive approach to treating apparent tumours with minimal toxicity. PDT has a long-standing application in antitumor treatment utilizing various photosensitizers (PSs) for different tumours. Historically, light has served as a therapeutic tool in many diseases. PDT involves a dual treatment process in which light energy and PSs are combined to ablate tumour cells following light activation. In general, PDT exhibits reduced side effects and toxicity compared to chemotherapy and radiotherapy, as it spares the extracellular matrix, facilitating excellent tissue healing and minimizing scarring. In addition, PSs can serve in diagnostic roles in tumour identification, termed photodynamic diagnosis (PDD). Advancements in flexible light sources that produce uniform illumination could significantly enhance the consistency of light delivery. This review outlines the clinical applications of OLEDs in PDT for cancer, addressing both diagnostic and therapeutic methods. Furthermore, we will explore various tumour cases using PDT with OLEDs. In particular, antimicrobial PDT targets antibiotic-resistant strains in diabetic foot ulcers, while metronomic PDT promotes cancer cell apoptosis through prolonged, low-intensity light exposure. Our emphasis is on PDT employing organic light-emitting diodes (OLEDs). Furthermore, the combination of PDT with NIR-OLEDs is examined for its potential to enhance tumour-targeting effectiveness, possibly exceeding the results of standalone treatments.

Analysis of polaron pair lifetime dynamics and secondary processes in exciplex driven TADF OLEDs using organic magnetic field effects

Magnetic field effects (MFEs) in thermally activated delayed fluorescence (TADF) materials have been shown to influence the reverse intersystem crossing (RISC) and to impact on electroluminescence (EL) and conductivity. Here, we present a novel model combining Cole-Cole and Lorentzian functions to describe low and high magnetic field effects originating from hyperfine coupling, the Δg mechanism, and triplet processes. We applied this approach to organic light-emitting devices of third generation based on tris(4-carbazoyl-9-ylphenyl)amine (TCTA) and 2,2',2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi), exhibiting blue emission, to unravel their loss mechanisms. The quality of the regression function was evaluated using k-fold cross-validation. The scoring was compared to various alternative fitting functions, which were previously proposed in literature. Density functional theory calculations, photoluminescence, and electroluminescence studies validated the formation of a TADF exciplex system. Furthermore, we propose successful encapsulation using a semi-permeable polymer, showing promising results for magnetic field sensing applications on arbitrary geometry. This study provides insights into the origin of magnetic field effects in exciplex-TADF materials, with potential applications in optoelectronic devices and sensing technologies.

Flexible and Disposable Hafnium Nitride Extended Gates Fabricated by Low-Temperature High-Power Impulse Magnetron Sputtering

To obtain a high-performance extended gate field-effect transistor for pH detection, hafnium nitride (HfN) was first fabricated on an indium tin oxide on polyethylene terephthalate (ITO/PET) substrate using a high-power impulse magnetron sputter system (HiPIMS) in this study. It can be easily applied in biomedical diagnostic and environmental monitoring applications with the advantages of flexible, disposable, cost-effective, and reliable components. Various duty cycle conditions in HiPIMSs were designed to investigate the corresponding sensing performance and material properties including surface morphology and composition. As the duty cycle increased, the grain size of HfN increased. Additionally, X-ray photoelectron spectroscopy (XPS) analysis illustrated the presence of HfOxNy on the deposited HfN surface. Both behaviors could result in a better pH sensing performance based on the theory of the site-binding model. Subsequently, HfN with a 15% duty cycle exhibited excellent pH sensitivity and linearity, with values of 59.3 mV/pH and 99.8%, respectively; its hysteresis width and drift coefficient were -1 mV and 0.5 mV/h, respectively. Furthermore, this pH-sensing performance remained stable even after 2000 repeated bending cycles. These results indicate the potential and feasibility of this HiPIMS-deposited HfN for future wearable chemical applications.

A metal-free and transparent light-emitting device by sequential spray-coating fabrication of all layers including PEDOT:PSS for both electrodes

The concept of a metal-free and all-organic electroluminescent device is appealing from both sustainability and cost perspectives. Herein, we report the design and fabrication of such a light-emitting electrochemical cell (LEC), comprising a blend of an emissive semiconducting polymer and an ionic liquid as the active material sandwiched between two poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate) (PEDOT:PSS) conducting-polymer electrodes. In the off-state, this all-organic LEC is highly transparent, and in the on-state, it delivers uniform and fast to turn-on bright surface emission. It is notable that all three device layers were fabricated by material- and cost-efficient spray-coating under ambient air. For the electrodes, we systematically investigated and developed a large number of PEDOT:PSS formulations. We call particular attention to one such p-type doped PEDOT:PSS formulation that was demonstrated to function as the negative cathode, as well as future attempts towards all-organic LECs to carefully consider the effects of electrochemical doping of the electrode in order to achieve optimum device performance.

Embedded Reverse-Offset Printing of Silver Nanowires and Its Application to Double-Stacked Transparent Electrodes with Microscale Patterns

We propose an embedded reverse-offset printing (EROP) method, which generates silver nanowire (AgNW) transparent electrodes for display applications. The proposed EROP method can solve the two critical issues of microscale pattern formation and surface planarization. The AgNW electrode had a transmittance of 82% at 550 nm, a sheet resistance of 12.2 Ω/sq, and a 3.27 nm smooth surface. We realized the roll-based pattern formation of AgNW on a plastic substrate as small as 10 μm with negligible step differences to facilitate the proposed method. The proposed EROP method also produced a double-stacked AgNW electrode, enabling the simultaneous operation of separately micropatterned devices. To verify the usefulness of EROP, we fabricated an organic light-emitting diode (OLED) device to demonstrate leakage current reduction and efficiency improvement compared with a conventional indium tin oxide (ITO)-based OLED device. The EROP-based OLED showed 38 and 25% higher current efficiencies than an insulator-patterned AgNW OLED and a conventional ITO-based OLED, respectively.

Transparent and Water-Resistant Composites Prepared from Acrylic Resins ABPE-10 and Acetylated Nanofibrillated Cellulose as Flexible Organic Light-Emitting Device Substrate

Acetylated nanofibrillated cellulose (ANFC)/acrylic resin ABPE-10 composite film was prepared by impregnating ABPE-10 into ANFC films under negative pressure, which can enhance properties of ANFC films by forming an interpenetrating polymer network structure between ABPE-10 and the ANFC film. The ANFC/ABPE-10 composite film met the high performance flexible organic light-emitting diode substrate requirement, even when the ANFC dosage was as high as approximately 70%. The transparency of films with different ANFC dosages significantly increased from 67% (42 µm) to 88% (45 µm), as determined by ultraviolet-visible analysis. The composite film inherited the properties of AFNC, with a low coefficient of thermal expansion and a ductile compact structure. The contact angles of ANFC films increased from 49.2° to 102.9° after dipping in ABPE-10. Additionally, the composite films had good surface smoothness and mechanical properties.

A compact, low-cost, quantitative and multiplexed fluorescence detection platform for point-of-care applications

An effective method of combating infectious diseases is the deployment of hand-held devices at the point-of-care (POC) for screening or self-monitoring applications. There is a need for very sensitive, low-cost and quantitative diagnostic devices. In this study, we present a low-cost, multiplexed fluorescence detection platform that has a high sensitivity and wide dynamic range. Our system features inexpensive 3 × 3 mm interference filters with a high stopband rejection, sharp transition edges, and greater than 90% transmission in the passband. In addition to the filters, we improve signal-to-noise ratio by leveraging time for accuracy using a charge-integration-based readout. The fluorescence sensing platform provides a sensitivity to photon flux of ∼1×10⁴photons/mm²sec and has the potential for 2-3 orders of magnitude improvement in sensitivity over standard colorimetric detection that uses colored latex microspheres. We also detail the design, development, and characterization of our low-cost fluorescence detection platform and demonstrate 100% and 97.96% reduction in crosstalk probability and filter cost, respectively. This is achieved by reducing filter dimensions and ensuring appropriate channel isolation in a 2 × 2 array configuration. Practical considerations with low-cost interference filter system design, analysis, and system performance are also discussed. The performance of our platform is compared to that of a standard laboratory array scanner. We also demonstrate the detection of antibodies to human papillomavirus (HPV16) E7 protein, as a potential biomarker for early cervical cancer detection in human plasma.

Wavy Architecture Thin-Film Transistor for Ultrahigh Resolution Flexible Displays

A novel wavy-shaped thin-film-transistor (TFT) architecture, capable of achieving 70% higher drive current per unit chip area when compared with planar conventional TFT architectures, is reported for flexible display application. The transistor, due to its atypical architecture, does not alter the turn-on voltage or the OFF current values, leading to higher performance without compromising static power consumption. The concept behind this architecture is expanding the transistor's width vertically through grooved trenches in a structural layer deposited on a flexible substrate. Operation of zinc oxide (ZnO)-based TFTs is shown down to a bending radius of 5 mm with no degradation in the electrical performance or cracks in the gate stack. Finally, flexible low-power LEDs driven by the respective currents of the novel wavy, and conventional coplanar architectures are demonstrated, where the novel architecture is able to drive the LED at 2 × the output power, 3 versus 1.5 mW, which demonstrates the potential use for ultrahigh resolution displays in an area efficient manner.

Achieving a high-efficiency dual-core chromophore for emission of blue light by testing different side groups and substitution positions

The optical and electronic properties of hetero dual core derivatives can be controlled by simply substituting an electron-donating side group.

Plant-derived cis-β-ocimene as a precursor for biocompatible, transparent, thermally-stable dielectric and encapsulating layers for organic electronics

This article presents low-temperature, one-step dry synthesis of optically transparent thermally-stable, biocompatible cis-β-ocimene-based thin films for applications as interlayer dielectric and encapsulating layer for flexible electronic devices, e.g. OLEDs. Morphological analysis of thin films shows uniform, very smooth (R_q < 1 nm) and defect-free moderately hydrophilic surfaces. The films are optically transparent, with a refractive index of ~1.58 at 600 nm, an optical band gap of ~2.85 eV, and dielectric constant of 3.5-3.6 at 1 kHz. Upon heating, thin films are chemically and optically stable up to at least 200 °C, where thermal stability increases for films manufactured at higher RF power as well as for films deposited away from the plasma glow. Heating of the sample increases the dielectric constant, from 3.7 (25 °C) to 4.7 (120 °C) at 1 kHz for polymer fabricated at 25 W. Polymers are biocompatible with non-adherent THP-1 cells and adherent mouse macrophage cells, including LPS-stimulated macrophages, and maintain their material properties after 48 h of immersion into simulated body fluid. The versatile nature of the films fabricated in this study may be exploited in next-generation consumer electronics and energy technologies.

Substrate and Passivation Techniques for Flexible Amorphous Silicon-Based X-ray Detectors

Flexible active matrix display technology has been adapted to create new flexible photo-sensing electronic devices, including flexible X-ray detectors. Monolithic integration of amorphous silicon (a-Si) PIN photodiodes on a flexible substrate poses significant challenges associated with the intrinsic film stress of amorphous silicon. This paper examines how altering device structuring and diode passivation layers can greatly improve the electrical performance and the mechanical reliability of the device, thereby eliminating one of the major weaknesses of a-Si PIN diodes in comparison to alternative photodetector technology, such as organic bulk heterojunction photodiodes and amorphous selenium. A dark current of 0.5 pA/mm² and photodiode quantum efficiency of 74% are possible with a pixelated diode structure with a silicon nitride/SU-8 bilayer passivation structure on a 20 µm-thick polyimide substrate.

Application of flat panel OLED display technology for the point-of-care detection of circulating cancer biomarkers

Point-of-care molecular diagnostics can provide efficient and cost-effective medical care, and they have the potential to fundamentally change our approach to global health. However, most existing approaches are not scalable to include multiple biomarkers. As a solution, we have combined commercial flat panel OLED display technology with protein microarray technology to enable high-density fluorescent, programmable, multiplexed biorecognition in a compact and disposable configuration with clinical-level sensitivity. Our approach leverages advances in commercial display technology to reduce pre-functionalized biosensor substrate costs to pennies per cm². Here, we demonstrate quantitative detection of IgG antibodies to multiple viral antigens in patient serum samples with detection limits for human IgG in the 10 pg/mL range. We also demonstrate multiplexed detection of antibodies to the HPV16 proteins E2, E6, and E7, which are circulating biomarkers for cervical as well as head and neck cancers.