Silk-Elastin-like Polymers for Acute Intraparenchymal Treatment of the Traumatically Injured Spinal Cord: A First Systematic Experimental Approach

Despite the promising potential of hydrogel-based therapeutic approaches for spinal cord injury (SCI), the need for new biomaterials to design effective strategies for SCI treatment and the outstanding properties of silk-elastin-like polymers (SELP), the potential use of SELPs in SCI is currently unknown. In this context, we assessed the effects elicited by the in vivo acute intraparenchymal injection of an SELP named (EIS)₂-RGD6 in a clinically relevant model of SCI. After optimization of the injection system, the distribution, structure, biodegradability, and cell infiltration capacity of (EIS)₂-RGD6 were assessed. Finally, the effects exerted by the (EIS)₂-RGD6 injection-in terms of motor function, myelin preservation, astroglial and microglia/macrophage reactivity, and fibrosis-were evaluated. We found that (EIS)₂-RGD6 can be acutely injected in the lesioned spinal cord without inducing further damage, showing a widespread distribution covering all lesioned areas with a single injection and facilitating the formation of a slow-degrading porous scaffold at the lesion site that allows for the infiltration and/or proliferation of endogenous cells with no signs of collapse and without inducing further microglial and astroglial reactivity, as well as even reducing SCI-associated fibrosis. Altogether, these observations suggest that (EIS)₂-RGD6-and, by extension, SELPs-could be promising polymers for the design of therapeutic strategies for SCI treatment.

Sonochemically-fabricated Ga@C-dots@Ga nanoparticle-aided neural growth

In this paper, we report the fabrication of an antibacterial material, Ga-doped C-dots on Ga nanoparticles (Ga@C-dots@Ga NPs), which is deposited on a glass substrate for neural growth. A one-step sonochemical process is applied for the simultaneous fabrication and coating of Ga@C-dots@Ga NPs using PEG 400 and molten gallium. The physical and chemical characteristics of the synthesized materials were studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), fluorescence analysis, dynamic light scattering (DLS) and other techniques. SH-SY5Y cells were plated on the substrates. The effect of the Ga@C-dots@Ga NPs on the development of neurites during the initiation and elongation growth phases was studied and compared with C-dots, Ga@C-dots and Ga NPs. Our research focuses on the influence of the physical and chemical properties of composites on neurite growth. We observed that cells grown on a Ga@C-dots@Ga-coated substrate exhibit a 97% increase in the number of branches originating from the soma. We found that surface modification and particle morphology play a significant role in the neural growth.

Silicon: the evolution of its use in biomaterials

In the 1970s, several studies revealed the requirement for silicon in bone development, while bioactive silicate glasses simultaneously pioneered the current era of bioactive materials. Considerable research has subsequently focused on the chemistry and biological function of silicon in bone, demonstrating that the element has at least two separate effects in the extracellular matrix: (i) interacting with glycosaminoglycans and proteoglycans during their synthesis, and (ii) forming ionic substitutions in the crystal lattice structure of hydroxyapatite. In addition, the dissolution products of bioactive glass (predominantly silicic acids) have significant effects on the molecular biology of osteoblasts in vitro, regulating the expression of several genes including key osteoblastic markers, cell cycle regulators and extracellular matrix proteins. Researchers have sought to capitalize on these effects and have generated a diverse array of biomaterials, which include bioactive glasses, silicon-substituted hydroxyapatites and pure, porosified silicon, but all these materials share similarities in the mechanisms that result in their bioactivity. This review discusses the current data obtained from original research in biochemistry and biomaterials science supporting the role of silicon in bone, comparing both the biological function of the element and analysing the evolution of silicon-containing biomaterials.

Substrates coated with silver nanoparticles as a neuronal regenerative material

Much effort has been devoted to the design of effective biomaterials for nerve regeneration. Here, we report the novel use of silver nanoparticles (AgNPs) as regenerative agents to promote neuronal growth. We grew neuroblastoma cells on surfaces coated with AgNPs and studied the effect on the development of the neurites during the initiation and the elongation growth phases. We find that the AgNPs function as favorable anchoring sites, and the growth on the AgNP-coated substrates leads to a significantly enhanced neurite outgrowth. Cells grown on substrates coated with AgNPs have initiated three times more neurites than cells grown on uncoated substrates, and two times more than cells grown on substrates sputtered with a plain homogenous layer of silver. The growth of neurites on AgNPs in the elongation phase was enhanced as well. A comparison with substrates coated with gold nanoparticles (AuNPs) and zinc oxide nanoparticles (ZnONPs) demonstrated a clear silver material-driven promoting effect, in addition to the nanotopography. The growth on substrates coated with AgNPs has led to a significantly higher number of initiating neurites when compared to substrates coated with AuNPs or ZnONPs. All nanoparticle-coated substrates affected and promoted the elongation of neurites, with a significant positive maximal effect for the AgNPs. Our results, combined with the well-known antibacterial effect of AgNPs, suggest the use of AgNPs as an attractive nanomaterial – with dual activity – for neuronal repair studies.

Porous silicon confers bioactivity to polycaprolactone composites in vitro

Silicon is an essential element for healthy bone development and supplementation with its bioavailable form (silicic acid) leads to enhancement of osteogenesis both in vivo and in vitro. Porous silicon (pSi) is a novel material with emerging applications in opto-electronics and drug delivery which dissolves to yield silicic acid as the sole degradation product, allowing the specific importance of soluble silicates for biomaterials to be investigated in isolation without the elution of other ionic species. Using polycaprolactone as a bioresorbable carrier for porous silicon microparticles, we found that composites containing pSi yielded more than twice the amount of bioavailable silicic acid than composites containing the same mass of 45S5 Bioglass. When incubated in a simulated body fluid, the addition of pSi to polycaprolactone significantly increased the deposition of calcium phosphate. Interestingly, the apatites formed had a Ca:P ratio directly proportional to the silicic acid concentration, indicating that silicon-substituted hydroxyapatites were being spontaneously formed as a first order reaction. Primary human osteoblasts cultured on the surface of the composite exhibited peak alkaline phosphatase activity at day 14, with a proportional relationship between pSi content and both osteoblast proliferation and collagen production over 4 weeks. Culturing the composite with J744A.1 murine macrophages demonstrated that porous silicon does not elicit an immune response and may even inhibit it. Porous silicon may therefore be an important next generation biomaterial with unique properties for applications in orthopaedic tissue engineering.

Substrate porosity induces phenotypic alterations in retinal cells cultured on silicon nanowires

Limitations of silicon nanowire arrays produced using chemical etching for drug delivery.

Neurons on nanometric topographies: insights into neuronal behaviors in vitro

Topography, the physical characteristics of an environment, is one of the most prominent stimuli neurons can encounter in the body. Many aspects of neurons and neuronal behavior are affected by the size, shape, and pattern of the physical features of the environment. A recent increase in the use of nanometric topographies, due to improved fabrication techniques, has resulted in new findings on neuronal behavior and development. Factors such as neuron adhesion, neurite alignment, and even the rate of neurite formation have all been highlighted through nanotopographies as complex phenomena that are driven by intricate intracellular mechanisms. Nanotopographies are suitable platforms, not only for fundamental studies on neuronal development, but also in practical applications, including multielectrode array devices and neuro-regenerative medicine. We reviewed recent publications that address the effects of nanotopography on neurons and categorized the observed behaviors as adherence, directional guidance, or accelerated outgrowth. We also discussed possible biological mechanisms of the molecular and cellular responses to topography, and suggested future perspectives for this field.

Microscale electrode implantation during nerve repair: effects on nerve morphology, electromyography, and recovery of muscle contractile function

BACKGROUND

The authors' goal is to develop a peripheral nerve electrode with long-term stability and fidelity for use in nerve/machine interfaces. Microelectromechanical systems use silicon probes that contain multichannel actuators, sensors, and electronics. The authors tested the null hypothesis that implantation of microelectromechanical systems probes does not have a detrimental effect on peripheral nerve function or regeneration.

METHODS

A rat hind-limb, peroneal nerve model was used in all experimental groups: intact nerve (control group, n=10); nerve division and repair (repair group, n=9); and nerve division, insertion of microelectromechanical systems probe, and repair (repair plus probe group, n=9). Nerve morphology, nerve to compound muscle action potential studies, walking tracks, and extensor digitorum longus muscle function tests were evaluated following an 80-day recovery.

RESULTS

Repair and repair plus probe showed no differences in axon count, axon size, percentage nonneural area, compound muscle action potential amplitude, latency, muscle mass, muscle force, or walking track scores. Although there was some local fibrosis around each microelectromechanical systems probe, this did not lead to measurable detrimental effects in any anatomical or functional outcome measurements.

CONCLUSION

The absence of a significant difference between the repair and the repair plus probe groups regarding histology, compound muscle action potential, walking tracks, and muscle force suggests that microelectromechanical systems electrodes are compatible with regenerating axons and show promise for establishing chemical and electrical interfaces with peripheral nerves.

Porous silicon as a potential electrode material in a nerve repair setting: Tissue reactions

We compared porous silicon (pSi) with smooth Si as chip-implant surfaces in a nerve regeneration setting. Silicon chips can be used for recording neural activity and are potential nerve interface devices. A silicon chip with one smooth and one porous side inserted into a tube was used to bridge a 5 mm defect in rat sciatic nerve. Six or 12 weeks later, new nerve structures surrounded by a perineurium-like capsule had formed on each side of the chip. The number of regenerated nerve fibers did not differ on either side of the chip as shown by immunostaining for neurofilaments. However, the capsule that had formed in contact with the chip was significantly thinner on the porous side than on the smooth side. Cellular protrusions had formed on the pSi side and the regenerated nerve tissue was found to attach firmly to this surface, while the tissue was hardly attached to the smooth silicon surface. We conclude that a pSi surface, due to its large surface area, diminished inflammatory response and firm adhesion to the tissue, should be a good material for the development of new implantable electronic nerve devices.