YTHDC2 inhibits rat bone mesenchymal stem cells osteogenic differentiation by accelerating RUNX2 mRNA degradation via m6A methylation

As the most abundant internal mRNA modification, N6-methyladenosine (m6A) RNA methylation has been found to influence many biological events including bone mesenchymal stem cells (BMSCs) osteogenic differentiation. YTH N6-methyladenosine RNA binding protein C2 （YTHDC2） is an m6A reading protein with the ability to mediate the decay of combined methylated mRNA, however its role in BMSCs osteogenic differentiation remains unknown. In this study, we first found an increase of RUNX family transcription factor 2 （RUNX2） expression and a decrease of YTHDC2 expression during the process of BMSCs osteogenic differentiation. Furthermore, we transfected BMSCs with YTHDC2 interference fragment, resulting in an increased content of RUNX2 mRNA and protein inside BMSCs. Finally, through RNA Immunoprecipitation experiments, we confirmed that YTHDC2 protein can bind to RUNX2 mRNA and accelerate its decomposition. Moreover, the immunofluorescence staining also showed a negative correlation between YTHDC2 and RUNX2. In conclusion, during BMSCs osteogenic differentiation, YTHDC2 protein showed decreased expression, resulting in a higher level of RUNX2 (mRNA and protein) expression inside cells, indicating YTHDC2 as a promising molecular target for the regulation of BMSCs osteogenic differentiation.

Nanomaterial-Based Scaffolds for Tissue Engineering Applications: A Review on Graphene, Carbon Nanotubes and Nanocellulose

Nanoscale biomaterials have garnered immense interest in the scientific community in the recent decade. This review specifically focuses on the application of three nanomaterials, i.e., graphene and its derivatives (graphene oxide, reduced graphene oxide), carbon nanotubes (CNTs) and nanocellulose (cellulose nanocrystals or CNCs and cellulose nanofibers or CNFs), in regenerating different types of tissues, including skin, cartilage, nerve, muscle and bone. Their excellent inherent (and tunable) physical, chemical, mechanical, electrical, thermal and optical properties make them suitable for a wide range of biomedical applications, including but not limited to diagnostics, therapeutics, biosensing, bioimaging, drug and gene delivery, tissue engineering and regenerative medicine. A state-of-the-art literature review of composite tissue scaffolds fabricated using these nanomaterials is provided, including the unique physicochemical properties and mechanisms that induce cell adhesion, growth, and differentiation into specific tissues. In addition, in vitro and in vivo cytotoxic effects and biodegradation behavior of these nanomaterials are presented. We also discuss challenges and gaps that still exist and need to be addressed in future research before clinical translation of these promising nanomaterials can be realized in a safe, efficacious, and economical manner.

In vitro toxicity of carbon nanotubes: a systematic review

Carbon nanotube (CNT) toxicity-related issues provoke many debates in the scientific community. The controversial and disputable data about toxicity doses, proposed hazard effects, and human health concerns significantly restrict CNT applications in biomedical studies, laboratory practices, and industry, creating a barrier for mankind in the way of understanding how exactly the material behaves in contact with living systems. Raising the toxicity question again, many research groups conclude low toxicity of the material and its potential safeness at some doses for contact with biological systems. To get new momentum for researchers working on the intersection of the biological field and nanomaterials, i.e., CNT materials, we systematically reviewed existing studies with in vitro toxicological data to propose exact doses that yield toxic effects, summarize studied cell types for a more thorough comparison, the impact of incubation time, and applied toxicity tests. Using several criteria and different scientific databases, we identified and analyzed nearly 200 original publications forming a "golden core" of the field to propose safe doses of the material based on a statistical analysis of retrieved data. We also differentiated the impact of various forms of CNTs: on a substrate and in the form of dispersion because in both cases, some studies demonstrated good biocompatibility of CNTs. We revealed that CNTs located on a substrate had negligible impact, i.e., 90% of studies report good viability and cell behavior similar to control, therefore CNTs could be considered as a prospective conductive substrate for cell cultivation. In the case of dispersions, our analysis revealed mean values of dose/incubation time to be 4-5 μg mL-1 h-1, which suggested the material to be a suitable candidate for further studies to get a more in-depth understanding of its properties in biointerfaces and offer CNTs as a promising platform for fundamental studies in targeted drug delivery, chemotherapy, tissue engineering, biosensing fields, etc. We hope that the present systematic review will shed light on the current knowledge about CNT toxicity, indicate "dark" spots and offer possible directions for the subsequent studies based on the demonstrated here tabulated and statistical data of doses, cell models, toxicity tests, viability, etc.

Electromagnetic field-assisted cell-laden 3D printed poloxamer-407 hydrogel for enhanced osteogenesis

3D bioprinted hydrogel has gained enormous attention, especially in tissue engineering, owing to its attractive structure and excellent biocompatibility. In this study, we demonstrated that 3D bioprinted cell-laden 'thermoresponsive' poloxamer-407 (P407) gels have the potential to stimulate osteogenic differentiation of apical papilla stem cells (SCAPs) under the influence of low voltage-frequency (5 V-1 Hz, 0.62 mT) electromagnetic fields (EMFs). SCAPs were initially used for cell-laden 3D printing to biomimic the apical papilla of human teeth. The developed hydrogel exhibited higher mechanical strength as well as good printability, showing high-quality micro-architecture. Moreover, the as-printed hydrogels (5 mm × 5 mm) were loaded with plasminogen activator inhibitor-1 (PAI-1) for testing the combined effect of PAI-1 and EMFs on SCAP differentiation. Interestingly, the 3D hydrogels showed improved viability and differentiation of SCAPs under EMFs' influence as examined by live/dead assay and alizarin Red-S staining, respectively. Therefore, our results confirmed that P407 hydrogels are non-toxic for encapsulation of SCAPs, yielding high cell viability and accelerate the cell migration potential. The 3D hydrogels with PAI-1 exhibited high mRNA expression levels for osteogenic/odontogenic gene markers (ALP, Col-1, DSPP, and DMP-1) vis-à-vis control after 14 days of in vitro culture. Our findings suggest that 3D bioprinted P407 hydrogels are biocompatible for SCAP encapsulation, and the applied low voltage-frequency EMFs could effectively improve dental tissue regeneration, particularly for oral applications.

Enhanced osteogenic potential of unzipped carbon nanotubes for tissue engineering

Carbon nanotubes (CNTs) have attracted significant interest for various applications owing to their superior physicochemical properties. The unzipping of multi-walled carbon nanotubes was accomplished by strong acid treatment. The solution of unzipped carbon nanotubes (u-CNTs) was homogeneous and stable. The u-CNTs were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. The dimensions and morphologies of the synthesized u-CNTs were examined by transmission electron microscopy and scanning electron microscopy. The u-CNTs exhibited increased zeta potential and diameter compared with pure CNTs. A decrease in the thermal stability was observed in the u-CNTs compared with pure CNTs. The u-CNTs exhibited better biocompatibility than pure CNTs in the presence of bone marrow-derived mesenchymal stem cells, showing improved biocompatibility. The u-CNT-treated media generated lower amounts of reactive oxygen species than pure CNTs. Enhanced mineralization was observed in the u-CNT-treated groups compared with the pure CNTs and the control, indicating its better osteogenic potential. The upregulation of osteogenic-associated gene markers in u-CNT groups compared with pure CNTs confirms their superior osteogenic potential. Thus, u-CNTs are potential candidates for tissue engineering applications, especially bone tissue.

Effects of Cirsium setidens (Dunn) Nakai on the osteogenic differentiation of stem cells

Cirsium setidens (Dunn) Nakai, commonly known as gondre, is a perennial herb that grows predominantly in South Korea. It contains several bioactive phytochemicals with antioxidant, anti-cancer, anti-tumor and anti-inflammatory properties. The present study aimed to investigate the effects of methanolic extracts of gondre on osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs). As characterized by nuclear magnetic resonance spectroscopy and matrix-assisted laser deposition/ionization (time-of-flight) mass spectrometry, the methanol extract of gondre was found to be enriched with pectolinarin. After 48 h, enhanced viability of hPDLSCs was observed in the presence of gondre compared with under control conditions, suggesting the biocompatibility of gondre. Notably, biocompatibility was markedly affected by gondre concentration in cultured media. Relatively high cell viability was observed in medium containing 0.05% gondre. Furthermore, mineralization was significantly higher in hPDLSCs in the presence of gondre compared with that in control cells, indicating their mineralization potential. Increased expression of various transcription markers, such as collagen 1, runt-related transcription factor 2, bone sialoprotein and alkaline phosphatase, was also detected when hPDLSCs were stimulated with gondre compared with in the control groups, further confirming the superior osteogenic potential of gondre extract for tissue engineering applications, particularly in bone tissues.

Fabrication and characterization of 3D printable nanocellulose-based hydrogels for tissue engineering

Cellulose nanocrystal (CNC)-based hydrogels are considered attractive biomaterials for tissue engineering due to their excellent physicochemical properties. Hydrogels of alginate and gelatin were prepared with or without CNCs and printed using a CELLINK® BIOX 3D bio-printer. The 3D-printed scaffolds were characterized by Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Improved mechanical strength was observed in the composite scaffolds compared to the pure polymer scaffolds. Fabricated scaffolds exhibited superior swelling potential; this property is profoundly affected by the CNC content of hydrogels. Biocompatibility of the fabricated scaffolds was monitored in the presence of human bone marrow-derived mesenchymal stem cells (hBMSCs) using the WST-1 assay. Notably, better cell viability was observed in the composite scaffolds than in the control, indicating improved biocompatibility of composites. Cells were healthy and adhered appropriately to the surface of the scaffolds. Mineralization potential of the prepared scaffolds was evaluated by the alizarin red S (ARS) staining technique in the presence of hBMSCs after 7 and 14 days of treatment. Enhanced mineral deposition was observed in the composite scaffolds compared to the control, indicating superior composite mineralization potential. Upregulation of osteogenic-associated genes was observed in the scaffold-treated groups relative to the control, showing superior scaffold osteogenic potential. These results demonstrate that 3D-printed scaffolds are potential candidates for bone tissue engineering applications.

Multifunctional bioactive chitosan/cellulose nanocrystal scaffolds eradicate bacterial growth and sustain drug delivery

Chitosan-based hydrogels have received significant interest in tissue engineering and regenerative medicine applications owing to their superior biocompatibility. However, their applications are restricted owing to their weak mechanical strength. Cellulose nanocrystals (CNCs) are often explored as reinforcing agents to improve the native properties of polymers owing to their superior physicochemical properties. We fabricated a multi-functional hydrogel scaffold of chitosan/CNCs by incorporating different amounts of CNCs into a chitosan (CH) hydrogel. Significant enhancement in the mechanical strength was noted in the CH/CNCs as compared to that in pure CH hydrogel scaffolds. The cytocompatibility of the fabricated scaffolds was monitored in the presence of bone-marrow-derived mesenchymal stem cells (BMSCs). Improved cell viability and mineralization were observed with CH/CNC hydrogel scaffolds than those with pure CH hydrogel scaffolds. Enhanced osteogenic-related gene expression was observed in the CH/CNC hydrogel scaffold environment than that in the control, indicating their osteogenic potential, in addition to enhanced antibacterial activity. Developed composite scaffolds exhibited improved sustained drug release compared to that by pure polymer scaffolds, and this was more sustained in the scaffolds with higher CNC content. Therefore, the fabricated scaffolds may have been used in tissue engineering for osteogenesis, as antibacterial agents, and in sustained drug delivery.

Dispersion of arc-discharged single-walled carbon nanotubes using the natural α-amino acid derivative N-dodecanoyl leucinate

The natural α-amino acid derivate N-dodecanoyl leucinate was synthesized via Schotten–Baumann reaction and alkali treatment, and was applied to the dispersion of arc-discharged single-walled carbon nanotubes (SWNTs). Optical absorption and Raman scattering spectra as well as AFM observation confirmed the effective individualization and selective dispersion of SWNTs. Moreover, charge transfer from N-dodecanoyl leucinate to SWNTs was evidenced by FT-IR and Raman scattering spectroscopic analyses. We believe that the formation of a charge transfer complex between dispersants and SWNTs is responsible for the effective individualization of SWNTs, and that the charge transfer from dispersants to SWNTs (or from SWNTs to dispersants) is crucial for selective dispersion of semiconducting (or metallic) SWNTs.

The synthesized natural α-amino acid derivative N-dodecanoyl leucinate demonstrates an effective and selective dispersion towards arc-discharged SWNTs.

Influence of Maitake (Grifola frondosa) Particle Sizes on Human Mesenchymal Stem Cells and In Vivo Evaluation of Their Therapeutic Potential

Maitake (Grifola frondosa) mushroom has received an enormous amount of attention as a dietary supplement due to its high nutritional values. The particle sizes of G. frondosa mushrooms were monitored by a classifying mill. β-Glucans are the bioactive component of the mushroom, and it was revealed through Fourier transform infrared spectroscopy (FTIR), proton and carbon nuclear magnetic resonance (¹H and ¹³C-NMR), matrix-assisted laser desorption/ionization, and time-of-flight (MALDI-TOF) spectrometry. The biocompatibility of G. frondosa particles, as well as induced osteogenesis of hMSCs, was evaluated through WST-1 assay and alizarin staining (ARS) technique, respectively. Notably, enhanced cell viability was noted in the presence of G. frondosa. Significantly improved calcium deposition has observed from hMSCs with G. frondosa, suggesting to their mineralization potential. The expression of osteogenic related gene markers was examined in the presence of G. frondosa through real-time polymerase chain reaction (qPCR) technique. The upregulation of osteogenic gene markers in the presence of G. frondosa particles was indicating their superior osteogenic potential. Besides, G. frondosa also activated the secretion of various kinds of proteins from the hMSCs indicating their potential for tissue engineering applications. Enhanced secretion of different immunoglobulins was observed in rat serum in the presence of G. frondosa, further demonstrating their therapeutic nature. Therefore, G. frondosa is effective for enhanced osteogenesis and can be utilized as a natural, edible, and osteogenic agent.

Osteogenic potential of human mesenchymal stem cells on eggshells-derived hydroxyapatite nanoparticles for tissue engineering

Nanocrystalline hydroxyapatite (HAp) was synthesized from biowaste eggshells through sonication followed by the heat treatment. Calcium oxide as a precursor moiety for the synthesis of HAp was obtained through the heat treatment of eggshells at 900°C for 3 hr. The prepared HAp was characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). The appearance of the FTIR absorption peaks in between at 516-1031 and 3,636 cm^-1 shows phosphate and hydroxyl groups in prepared HAp, respectively. The XRD-patterns indicate the formation of HAp started within 5 min of sonication. The SEM morphologies suggested that the synthesized HAp was highly crystalline and compact. We tested the elemental analysis of the synthesized HAp through X-ray fluorescence spectroscopy and inductively coupled plasma mass spectroscopy. The higher Ca/P ratio has observed in heat-treated HAp. These results show that heat treatment facilitates the formation of highly crystalline and compact HAp. Cytotoxicity and osteogenic potential of human mesenchymal stem cells (hMSCs) were also evaluated in the presence of HAp. No significant cytotoxicity was noted in the presence of HAp, suggested their biocompatibility. Enhanced osteogenesis of hMSCs occurred with HAp powder, confirming the feasibility in the treatment of osteogenesis. Thus, synthesized HAp has the potential to use a biomaterial in tissue engineering applications for bone tissues.