Dopingless Negative Capacitance Ferroelectric TFET for Breast Cancer Cells Detection: Design and Sensitivity Analysis

Fringe-fields-modulated double-gate tunnel-FET biosensor

This paper aims to evaluate a groundbreaking bio-TFET that utilizes the fringe fields capacitance concept to detect neutral and charged biomolecules. While facilitating fabrication process and scalability, this innovative bio-TFET is able to rival the conventional bio-TFET which relies on carving cavities in the gate oxide. The cavities of the proposed device are carved in the spacers over the source region and in the vicinity of the gate metal. Inserting biomolecules in the cavities of our bio-TFET modifies the fringe fields arising out of the gate metal. As a result, these spacers modulate tunneling barrier width at the source-channel tunneling junction. We have assessed our proposed device's DC/RF performance using the calibrated Silvaco ATLAS device simulator. For further evaluation of the reliability of our bio-TFET, non-idealities, such as trap-assisted tunneling and temperature, are also studied. The device we propose is highly suitable for biosensing applications, as evidenced by the parameters of [Formula: see text] = 1.21 × 103, SSS = 0.365, and [Formula: see text] = 1.63 × 103 at VGS = 1 V.

Ultra Sensitive Breast Cancer Cell Lines Detection Using Dual Nanocavities Engraved Junctionless FET

This article reports breast cancer cell lines (Hs578T, MDA-MB-231, MCF-7, and T47D) and healthy breast cells (MCF-10A) detection based on the modulation of its electrical properties by deploying dual nanocavity engraved junctionless FET. The device has a dual gate to enhance gate control and has two nanocavities etched under both gates for breast cancer cell lines immobilization. As the cancer cells are immobilized in the engraved nanocavities, which were earlier filled with air, the dielectric constant of the nanocavities changes. This results in the modulation of the device's electrical parameters. This electrical parameters modulation is then calibrated to detect the breast cancer cell lines. The reported device demonstrates a higher sensitivity toward the detection of breast cancer cells. The JLFET device optimization is done for improving the performance by optimizing the nanocavity thickness and the SiO2 oxide length. The variation in the dielectric property of cell lines plays a key role in the detection technique of the reported biosensor. The sensitivity of the JLFET biosensor is analyzed in terms of ∆VTH, ∆ION, ∆gm , and ∆SS . The reported biosensor shows the maximum sensitivity for T47D ( κ = 32 ) breast cancer cell line with ∆VTH = 0.800 V, ∆ION = 0.165 mA/μm, ∆gm = 0.296 mA/V-μm , and ∆SS = 5.41 mV/decade. Moreover, the effect of variation in the occupancy of the cavity by the immobilized cell lines has also been studied and analyzed. With increased cavity occupancy the variation in the device performance parameter enhances Further, the sensitivity of the proposed biosensor is compared with the existing biosensors and it is reported to be highly sensitive as compared to the existing biosensors. Hence, the device can be utilized for array based screening of cell lines of breast cancer and diagnosis with the benefit of easier fabrication and cost effectiveness of the device.

Fin field-effect-transistor engineered sensor for detection of MDA-MB-231 breast cancer cells: A switching-ratio-based sensitivity analysis

The present study describes the utilization of a gallium-arsenide gate-stack gate-all-around (GaAs-GS-GAA) fin field-effect transistor (FinFET) to accomplish the electrical identification of the breast cancer cell MDA-MB-231 by monitoring the device switching ratio. The proposed sensor uses four nanocavities carved beneath the gate electrodes for enhanced detection sensitivity. MDA-MB-231 (cancerous) and MCF-10A (healthy) breast cells have a distinct dielectric constant, and it changes when exposed to microwave frequencies spanning across 200 MHz and 13.6 GHz, which modifies the electrical characteristics, allowing for early diagnosis. First, a percentage shift in the primary DC characteristics is presented to demonstrate the advantage of GS-GAA FinFET over conventional FinFET. The sensor measures the switching-ratio-based sensitivity, which comes out to be 99.72% for MDA-MB-231 and 47.78% for MCF-10A. The sensor was tested for stability and reproducibility and found to be repeatable and sufficiently stable with settling times of 55.51, 60.80, and 71.58 ps for MDA-MB-231 cells, MCF-10A cells, and air, respectively. It can distinguish between viable and nonviable cells based on electrical response alterations. The possibility of early detection of cancerous breast cells using Bruggeman's model is also discussed. Further, the impact of biomolecule occupancy and frequency variations on the device sensitivity is carried out. This study also explains how to maximize the sensing performance by adjusting the fin height, fin width, work function, channel doping, temperature, and drain voltage. Lastly, this article compared the proposed breast cancer cell detectors to existing literature to evaluate their performance and found considerable improvement. The findings of this research have the potential to establish GaAs-GS-GAA FinFET as a promising contender for MDA-MB-231 breast cancer cell detection.