Moisture variation analysis of the green plum during the drying process based on low-field nuclear magnetic resonance

Quality Evaluation and Browning Control in the Multi-Stage Processing of Mume Fructus (Wumei)

The dried Mume Fructus (MF), called Wumei in China, is a unique food with medicinal and edible effects. But its actual production method is outdated with low efficiency and inconsistent quality. This study systematically investigated the influence of moisture content (MC), temperature, and relative humidity (RH) on the browning reaction and quality characteristics of the MF and proposed a continuous processing strategy of the three-stage variable process for MF production based on the precise process control of the temperature and the RH. The production process of MF was divided into three stages: preliminary dehydration, browning, and drying. The results showed that the browning reaction rate and drying efficiency were optimal when the MC of the raw materials was reduced to 50%. In the browning stage, the degree of browning was better, and the antioxidant capacity reached the maximum of 64.38 mg/g DM under a processing temperature of 80 °C and an RH of more than 60%. As the RH increased, the drying rate decreased, and the ash content exhibited an increase. Therefore, the optimal processing parameters for the browning stage were determined to be a temperature of 80 °C and an RH of 60%. In the final drying stage, a temperature of 60 °C coupled with a dehumidification mode proved sufficient to ensure efficient drying without compromising the quality of the MF. This study revealed the reaction mechanism of the rapid browning processing of MF, which has important guiding significance for the rapid processing of browning foods.

Effect of Electrohydrodynamic Drying on Drying Characteristics and Physicochemical Properties of Carrot

This study investigates the effects of electrohydrodynamic (EHD) drying technology on the drying kinetics, microstructure, quality, and nutritional components of carrots, along with conducting experiments on EHD drying under different voltage gradients. The experimental results showed that EHD drying technology could significantly increase the drying rate and the effective moisture diffusion coefficient. Within a certain range, the drying rate was directly proportional to the voltage. When the range was exceeded, the increase in voltage had a minimal effect on the drying rate. In terms of quality, the EHD drying group's color, shrinkage rate, and rehydration performance were superior to the control group, and different voltages had no significant effect on the shrinkage rate and rehydration performance. The retention of carotenoids in the EHD drying group was 1.58 to 2 times that of the control group. EHD drying had a negative impact on the total phenolic content and vitamin A content of dried carrot slices. Based on the results of infrared spectroscopy and scanning electron microscopy (SEM), the dehydrated carrot slices showed wrinkling due to water loss, with numerous pores, a generally intact structure, and retained functional groups. EHD drying had a significant impact on the secondary structure of proteins, where an increase in voltage led to an increase in disordered structure, with a smaller proportion of disordered structure in the lower voltage group compared to the control group, and a similar proportion of disordered structure between the higher voltage group and the control group. Results from low-field nuclear magnetic resonance (NMR) showed that EHD drying could retain more bound water compared to the control group, with the best retention of cellular bound water at a voltage of 26 kV and the best retention of cellular immobilized water at a voltage of 38 kV, indicating the superiority of EHD drying in preserving cellular structure. This study provided a theoretical basis and experimental foundation for the application of electrohydrodynamic drying technology to carrot drying, and promoted the practical application of EHD drying technology.

Quantitative evaluation and chromatographic fingerprinting for the quality assessment of Pudilan tablet

An easy, quick, and sensitive approach adopting ultra-performance liquid chromatography (UPLC) equipped with diode array detector was used to analyze and systematically evaluate the quality of Pudilan tablets manufactured by 12 distinct pharmaceutical companies. In this research, 15 peaks were chosen as the common peaks to assess the similarities for different batches (S1–S43) of Pudilan tablet samples. In comparison with the control fingerprint, similarity values for 43 batches of samples exceeded 0.922. In addition, by analyzing the reference substances of epigoitrin, caffeic acid, chlorogenic acid, acetylcorynoline, baicalin and baicanshialein, the chromatogram of the 6 reference substances was established. The recoveries for the reference substances which demonstrated good regression in the linear range (r 2 > 0.999) were in the range of 98.3–101.1%. The results demonstrated that the established method was highly accurate, efficient and reliable. This study provides a valid, dependable and pragmatic method to evaluate the quality of Pudilan tablet.