Enhanced bone formation during healing process of tooth sockets filled with demineralized human dentine matrix

Advances in autogenous dentin matrix graft as a promising biomaterial for guided bone regeneration in maxillofacial region: A review

Autogenous dentin matrix (ADM), derived from a patient's extracted tooth, can be repurposed as an autologous grafting material in reconstructive dentistry. Extracted teeth provide a source for ADM, which distinguishes itself with its low rejection rate, osteoinductive capabilities and ease of preparation. Consequently, it presents a viable alternative to autogenous bone. Animal studies have substantiated its effective osteoinductive properties, while its clinical applications encompass post-extraction site preservation, maxillary sinus floor augmentation, and guided bone tissue regeneration. Nevertheless, the long-term efficacy of ADM applied in bone regeneration remains underexplored and there is a lack of standardization in the preparation processes. This paper comprehensively explores the composition, mechanisms underlying osteoinductivity, preparation methods, and clinical applications of ADM with the aim of establishing a fundamental reference for future studies on this subject.

Evaluation and comparison of autologous particulate dentin with demineralized freeze dried bone allograft in ridge preservation procedures - a prospective clinical study

OBJECTIVES

To compare effectiveness of Autologous Particulate Dentin (APD) with Demineralized Freeze-Dried Bone Allograft (DFDBA) in ridge preservation, using radiographic and clinical parameters.

MATERIALS AND METHODS

Thirty subjects with indication of mandibular posterior teeth extraction were randomly assigned to either test or control group. After atraumatic extraction, ridge preservation was performed using APD or DFDBA mixed with i-PRF in test and control groups respectively. Both groups had sockets sealed with A-PRF membrane. Clinical parameters (plaque, gingival and healing indices) and radiographic parameters (vertical ridge height, horizontal ridge width) were assessed at baseline and 6 months using CBCT. Statistical analysis was performed using an independent t-test to compare clinical and radiographic parameters between the groups.

RESULTS

Both groups had significant decreases in ridge dimensions over 6 months (p < 0.001). The test group showed less reduction in ridge dimensions than control group at 6 months (p < 0.001). Mean change in vertical height was not significant (1.37 ± 1.32, 1.7311 ± 0.563), but in horizontal ridge width (1.3120 ± 1.13, 1.8093 ± 1.16) was significantly different between test and control groups respectively. There was no statistical difference in clinical parameters between the groups at 6 months (p > 0.001).

CONCLUSIONS

APD grafts resulted in significant improvements in radiographic parameters, specifically in vertical ridge height and horizontal ridge width, compared to DFDBA group.

CLINICAL RELEVANCE

Autologous particulate dentin is a promising, versatile substitute for regenerative procedures. While more research on its long-term efficacy and application is needed, current evidence suggests it could significantly improve patient care and outcomes.

Demineralized dentin matrix for bone regeneration in dentistry: A critical update

Over the last few decades, several new materials and techniques have been developed for bone regeneration. Scaffolds based on demineralized dentin matrix (DDM) present an attractive option due to their availability and several animal and human studies have been conducted to ascertain their utility in regenerative dentistry. The aim of this review was to summarize the recent studies conducted on DDM and used for bone grafts. PubMed, Web of Science, and Scopus were used to search for studies published within the last 10 years. The keywords and terms used were: "demineralized dentine matrix", "bone grafting", "bone augmentation" and "guided tissue regeneration" in various combinations. Original studies (in vitro, animal and human) and systematic reviews were included in the literature search. The literature search initially identified 23 studies (16 animal studies and 7 clinical reports. Most studies included in this review indicate that DDM has demonstrated promising results in a variety of dental and regenerative medicine applications. Further studies are required to completely comprehend its characteristics and prospective applications. Future studies should also focus on optimizing the processing protocols for the production of DDM-based scaffolds.

Histological examination of tooth-derived biomaterials obtained from different devices

AIM

The aim of the present study was to investigate the histological differences between samples processed by different devices and to confirm safe clinical application of different dentin matrix obtained from three devices: BonMaker, Tooth Transformer, and Smart Dentin Grinder in regeneration of maxillary defects.

RESEARCH DESIGN

The study involved 39 patients with two-wall or three-wall defects who underwent bone augmentation procedures in the maxilla using dentin matrix grafts from the BonMaker, Tooth Transformer, and Smart Dentin Grinder devices. Histological examination was conducted on samples obtained from patients who received each device. In this article, histological samples have been selected and are presented.

RESULTS

In all patients, bone defects were successfully augmented with ground dentin matrix. The histological examination revealed no inflammation and a good connection between the bone and dentin matrix and clinically all patients were qualified for implant placement.

CONCLUSIONS

After comparing the BonMaker, Tooth Transformer, and Smart Dentin Grinder devices in our practice, we concluded that all these systems have the potential for obtaining regenerative material from the patient's teeth.

Osteogenic Potential of Autologous Dentin Graft Compared with Bovine Xenograft Mixed with Autologous Bone in the Esthetic Zone: Radiographic, Histologic and Immunohistochemical Evaluation

This prospective, randomized, controlled clinical trial reports clinical, radiographic, histologic and immunohistochemical results of autologous dentin graft (ADG) and its comparison with a mixture of bovine xenograft with autologous bone (BX+AB). After tooth extraction in the esthetic zone of maxilla, the alveolar ridge of 20 patients in the test group was augmented with ADG, while 17 patients in the control group received the combination of BX+AB. Cone beam computed tomography (CBCT) was performed before tooth extraction and after 4 months when a total of 22 bone biopsies were harvested and subjected to histological and immunohistochemical analysis. Radiological analysis showed comparable results of bone dimension loss in both groups. Quantitative histologic analysis showed comparable results with no statistically significant differences between the groups. Immunohistochemical staining with TNF-α and BMP-4 antibodies revealed immunopositivity in both groups. A statistically significant difference between the groups was found in the intensity of TNF-α in the area of newly formed bone (p = 0.0003) and around remaining biomaterial particles (p = 0.0027), and in the intensity of BMP-4 in the area around biomaterial particles (p = 0.0001). Overall, ADG showed biocompatibility and achieved successful bone regeneration in the esthetic zone of the maxilla similar to BX+AB.

Human dentin materials for minimally invasive bone regeneration: Animal studies and clinical cases

OBJECTIVES

Bone, platelet concentrate, and tooth-derived dentin/cementum have been used as autologous materials in regenerative medicine Dentin materials were first recycled in 2002 for bone regeneration in humans, although bone autografts were noted in the 19th century, and auto-platelet concentrates were developed in 1998. Dentin/cementum-based material therapy has been applied as an innovative technique for minimally invasive bone surgery, while bone autografts are associated with donor site morbidity.

METHODS

In October 2021, PubMed, Google Scholar, Scopus, and the Cochrane Library databases from 1980 to 2020 were screened.

RESULTS

The demineralized dentin/cementum matrix (DDM) had better performance in bone induction and bone regeneration than mineralized dentin.

CONCLUSIONS

Unlike cell culture therapy, DDM is a matrix-based therapy that includes growth factors. A matrix-based system is a realistic and acceptable treatment, even in developing countries. The aim of this review was to summarize the evidence related to both animal studies and human clinical cases using human dentin materials with a patch of cementum, especially DDM.

Comparing the effect of demineralized versus hybrid dentin matrices on inducing bone regeneration in New Zealand white rabbits' Mandibular defect

OBJECTIVES

The aim of this study was to compare the effect of using demineralized dentin matrix (DDM) versus hybrid dentin matrices; Demineralized and undemineralized dentin particles (DDM +UDDM) on inducing bone regeneration in mandibular defects.

DESIGN

The study was conducted on fifty adult New Zealand rabbits, twenty for preparation of experimental materials and thirty for surgical procedures. They were randomly assigned into 3 equal groups as follow one control group: no treatment and two experimental groups including demineralized group: treated with DDM only; and hybrid group: treated with a hybrid of (50% DDM+50% UDD). A rounded critical size defect (10 mm in diameter- 5 mm in depth) was created in the body of mandible. After 3- and 6-weeks post-surgery, the bone regeneration was evaluated by light microscope, scanning electron microscope and histomorphometry.

RESULTS

Histological, histomorphometrical observation and SEM revealed that both dentin matrices had largely resorbed and induced new bone formation at both experimental groups compared to the control group, with statistically higher percentage of new bone formation in the hybrid group.

CONCLUSION

We concluded that although both dentin matrices induced new bone formation; however, hybrid dentin matrix yielded better results compared to DDM group.

Autogenous particulated dentin for alveolar ridge preservation. A systematic review

PURPOSE

This review aimed to investigate the clinical outcomes of autogenous particulated dentin (APD) used for alveolar ridge preservation (ARP), evaluating volume gain, histologic/histomorphometric data, and associated complications.

MATERIAL AND METHODS

The review followed PRISMA guidelines and was registered in the International Prospective Register of Systematic Reviews (PROSPERO). An automated search was made in four databases (Medline/Pubmed, Scopus, Web of Science, and Cochrane Library) supplemented by a manual search for relevant clinical articles published before March 10th, 2022. The review included human studies of at least four patients in which extraction and subsequent ARP were performed in a single surgery. Both comparative studies and studies that assessed ARP with APD exclusively were admitted. The quality of evidence was assessed with the Cochrane bias assessment tool, the Newcastle-Ottawa Quality Assessment Scale, and the Joanna Briggs Institute Critical Appraisal tool.

RESULTS

Eleven studies fulfilled the inclusion criteria and were included for descriptive analysis, with a total of 215 patients, and 337 alveoli preserved by APD, spontaneous healing (blood clot), or other bone substitutes, obtaining comparatively less vertical and horizontal resorption when APD was used.

CONCLUSIONS

After dental extraction, autogenous dentin was effective in terms of volume maintenance, showing promising results in histologic/histomorphometric analysis, and a low complication rate. Nevertheless, few comparative studies with comparable parameters have been published and so more research providing long-term data is needed to confirm these findings.

Biomimetic Approaches in Clinical Endodontics

In the last few decades, biomimetic concepts have been widely adopted in various biomedical fields, including clinical dentistry. Endodontics is an important sub-branch of dentistry which deals with the different conditions of pulp to prevent tooth loss. Traditionally, common procedures, namely pulp capping, root canal treatment, apexification, and apexigonesis, have been considered for the treatment of different pulp conditions using selected materials. However, clinically to regenerate dental pulp, tissue engineering has been advocated as a feasible approach. Currently, new trends are emerging in terms of regenerative endodontics which have led to the replacement of diseased and non-vital teeth into the functional and healthy dentine-pulp complex. Root- canal therapy is the standard management option when dental pulp is damaged irreversibly. This treatment modality involves soft-tissue removal and then filling that gap through the obturation technique with a synthetic material. The formation of tubular dentine and pulp-like tissue formation occurs when stem cells are transplanted into the root canal with an appropriate scaffold material. To sum up tissue engineering approach includes three components: (1) scaffold, (2) differentiation, growth, and factors, and (3) the recruitment of stem cells within the pulp or from the periapical region. The aim of this paper is to thoroughly review and discuss various pulp-regenerative approaches and materials used in regenerative endodontics which may highlight the current trends and future research prospects in this particular area.

Demineralized Dentin Matrix for Dental and Alveolar Bone Tissues Regeneration: An Innovative Scope Review

BACKGROUND

Dentin is a permeable tubular composite and complex structure, and in weight, it is composed of 20% organic matrix, 10% water, and 70% hydroxyapatite crystalline matrix. Demineralization of dentin with gradient concentrations of ethylene diamine tetraacetic acid, 0.6 N hydrochloric acid, or 2% nitric acid removes a major part of the crystalline apatite and maintains a majority of collagen type I and non-collagenous proteins, which creates an osteoinductive scaffold containing numerous matrix elements and growth factors. Therefore, demineralized dentin should be considered as an excellent naturally-derived bioactive material to enhance dental and alveolar bone tissues regeneration.

METHOD

The PubMed and Midline databases were searched in October 2021 for the relevant articles on treated dentin matrix (TDM)/demineralized dentin matrix (DDM) and their potential roles in tissue regeneration.

RESULTS

Several studies with different study designs evaluating the effect of TDM/DDM on dental and bone tissues regeneration were found. TDM/DDM was obtained from human or animal sources and processed in different forms (particles, liquid extract, hydrogel, and paste) and different shapes (sheets, slices, disc-shaped, root-shaped, and barrier membranes), with variable sizes measured in micrometers or millimeters, demineralized with different protocols regarding the concentration of demineralizing agents and exposure time, and then sterilized and preserved with different techniques. In the act of biomimetic acellular material, TDM/DDM was used for the regeneration of the dentin-pulp complex through direct pulp capping technique, and it was found to possess the ability to activate the odontogenic differentiation of stem cells resident in the pulp tissues and induce reparative dentin formation. TDM/DDM was also considered for alveolar ridge and maxillary sinus floor augmentations, socket preservation, furcation perforation repair, guided bone, and bioroot regenerations as well as bone and cartilage healing.

CONCLUSION

To our knowledge, there are no standard procedures to adopt a specific form for a specific purpose; therefore, future studies are required to come up with a well-characterized TDM/DDM for each specific application. Likely as decellularized dermal matrix and prospectively, if the TDM/DDM is supplied in proper consistency, forms, and in different sizes with good biological properties, it can be used efficiently instead of some widely-used regenerative biomaterials.

SEM and FT-MIR Analysis of Human Demineralized Dentin Matrix: An In Vitro Study

Recently, the demineralized dentin matrix has been suggested as an alternative material to autologous bone grafts and xenografts for clinical purposes. The aim of this study was to investigate the effect of different times of demineralization on the chemical composition and the surface morphology of dentinal particles. Extracted teeth were ground and divided into 5 groups based on demineralization time (T0 = 0 min, T2 = 2 min, T5 = 5 min, T10 = 10 min, and T60 = 60 min) with 12% EDTA. The analysis was performed using Fourier-Transform Mid-Infrared spectroscopy (FT-MIR) and Scanning Electron Microscopy (SEM) (p < 0.05). The FT-MIR analysis showed a progressive reduction of the concentration of both PO43− and CO32− in the specimens (T0 > T2 > T5 > T10 > T60). On the contrary, the organic (protein) component did not undergo any change. The SEM examination showed that increasing the times of demineralization resulted in a smoother surface of the dentin particles and a higher number of dentinal tubules.

Micro-Computed Tomography Analysis on Administration of Mesenchymal Stem Cells - Bovine Teeth Scaffold Composites for Alveolar Bone Tissue Engineering

The tissue engineering approach for periodontal tissue regeneration using a combination of stem cells and scaffold has been vastly developed. Mesenchymal Stem Cells (MSCs) seeded with Bovine Teeth Scaffold (BTSc) can repair alveolar bone damage in periodontitis cases. The alveolar bone regeneration process was analyzed by micro-computed tomography (µ-CT) to observe the structure of bone growth and to visualize the scaffold in 3-Dimensional (3D). The purpose of this study is to analyze alveolar bone regeneration by µ-CT following the combination of MSCs and bovine teeth scaffold (MSCs-BTSc) implantation in the Wistar rat periodontitis model. Methods. MSCs were cultured from adipose-derived mesenchymal stem cells of rats. BTSc was taken from bovine teeth and freeze-dried with a particle size of 150-355 µm. MSCs were seeded on BTSc for 24 hours and transplanted in a rat model of periodontitis. Thirty-five Wistar rats were made as periodontitis models with LPS induction from P. gingivalis injected to the buccal section of interproximal gingiva between the first and the second mandibular right-molar teeth for six weeks. There were seven groups (control group, BTSc group on day 7, BTSc group on day 14, BTSc group on day 28, MSCs-BTSc group on day 7, MSCs-BTSc group on day 14, MSCs-BTSc group on day 28). The mandibular alveolar bone was analyzed and visualized in 3D with µ-CT to observe any new bone growth. Statistical Analysis. Group data were subjected to the Kruskal Wallis test followed by the Mann-Whitney (p <0.05). The µ-CT qualitative analysis shows a fibrous structure, which indicates the existence of new bone regeneration. Quantitative analysis of the periodontitis model showed a significant difference between the control model and the model with the alveolar bone resorption (p <0.05). The bone volume and density measurements revealed that the MSCs-BTSc group on day 28 formed new bone compared to other groups (p <0.05). Administration of MSCs-BTSc combination has the potential to form new alveolar bone.

Microcomputed Tomography and Histological Study of Bone Regeneration Using Tooth Biomaterial with BMP-2 in Rabbit Calvarial Defects

Our study was aimed to analyze the osteoinductive effect of powdered and block type autogenous bone graft along with bone morphogenetic protein (BMP-2) as compared to synthetic bone graft. Three circular bicortical defects were made in the calvaria of each rabbit and randomly divided into three groups as follows: powdered tooth biomaterial+BMP-2, block tooth biomaterial+BMP-2, and control group: synthetic bone+BMP-2. The samples taken from these defects after 4 and 8 weeks were analyzed histologically along with micro CT analysis. In our study, both powered and block type tooth autogenous bone graft successfully stimulated mesenchymal cells leading to endochondral ossification and bone regeneration. We observed that the powered bone graft material which is acid insoluble especially is preferable as a carrier for BMP-2.

The Use of Autogenous Teeth for Alveolar Ridge Preservation: A Literature Review

Alveolar ridge resorption is a natural consequence of teeth extraction, with unpleasant aesthetic and functional consequences that might compromise a future oral rehabilitation. To minimize the biological consequences of alveolar ridge resorption, several surgical procedures have been designed, the so-called alveolar ridge preservation (ARP) techniques. One important characteristic is the concomitant use of biomaterial in ARP. In the past decade, autogenous teeth as a bone graft material in post-extraction sockets have been proposed with very interesting outcomes, yet with different protocols of preparation. Here we summarize the available evidence on autogenous teeth as a biomaterial in ARP, its different protocols and future directions.

Autogenous Tooth Bone Graft and Simvastatin Combination Effect on Bone Healing

OBJECTIVE

Autogenous tooth bone grafts (ATGM) are materials prepared from extracted teeth and have been used for bone augmentation. These graft materials are known to have similar structures and components to bone grafts. In this sense, this study aimed to evaluate all the tooth layers mixed with simvastatin without any demineralization process effect on bone formation.

METHODS

In 60 Wistar albino rats, a standardized 6.0 m-diameter critical size bone defect was created in their calvarium. The study consists of 1 control and 4 experimental groups. In the control group (12 rats), the defects were left empty. The defects were grafted only with ATGM in Group 1, with ATGM mixed with simvastatin in Group 2, autogenous bone graft mixed with simvastatin in Group 3, and with xenogenic bone graft mixed with simvastatin in Group 4. The animals were sacrificed at the 7th and 28th days after operation.

RESULTS

PCR, micro CT and histological results show that bone formation was enhanced in the experimental groups in comparison to the control group. Group 1 and Group 2 had similar bone formation rate when compared to Group 3 and Group 4 at the 28th day after operation.

CONCLUSION

This study concludes that mineralized teeth may be used for defect reconstruction without any demineralization process. Autogenous mineralized tooth bone graft should be mixed with simvastatin for bone regeneration like other grafts.

Physicochemical and osteogenic properties of chairside processed tooth derived bone substitute and bone graft materials

To analyze physicochemical such as surface structures, the crystallinity, chemical composition, calcium phosphate dissolution and osteogenic properties of tooth derived bone substitute (TDBS) processed chair-side and other grafting materials. The number of anaerobic and facultative anaerobic bacteria in the supernatant of processed TDBS was determined. Human osteoblasts were co-cultured with TDBS or allograft in transwell system to examine cell migration. BMP2 released from TDBS was measured by ELISA. TDBS had high crystallinity similar to BoneCeramic while it had a broad pattern to ramus bone, OraGRAFT, and Bio-Oss. TDBS contained carbon, calcium, oxygen, phosphate, sodium and magnesium elements like others. Calcium/phosphorus dissolution of TDBS show closely related to those of mandibular ramus bone and OraGRAFT. In addition, microbial decontamination of TDBS by the chemical processing revealed a hundred percent efficacy. The osteoconductive and osteoinductive properties demonstrated in the TDBS processed chairside suggested the potential of an alternative for bone grafting material.

Autogenous Dentin Graft in Bone Defects after Lower Third Molar Extraction: A Split-Mouth Clinical Trial

Various biomaterials are currently used for bone regeneration, with autogenous bone being considered the gold standard material because of its osteogenic, osteoconductive, and osteoinductive properties. In recent years, the use of autogenous dentin as a graft material has been described. This split-mouth clinical trial assesses the efficacy of autogenous dentin for the regeneration of periodontal defects caused by bone loss associated with impacted lower third molar extraction. Fifteen patients underwent bilateral extraction surgery (30 third molars) using dentin as a graft material on the test side, and leaving the control side to heal spontaneously, comparing the evolution of the defects by evaluating probing depth at three and six months post-operatively. Bone density and alveolar bone crest maintenance were also evaluated six months after surgery, and pain, inflammation, mouth opening capacity on the second and seventh days after surgery. Probing depth, radiographic bone density, and alveolar bone crest maintenance showed significant differences between the test and control sides. Autogenous dentin was found to be an effective biomaterial for bone regeneration after impacted lower third molar extraction.

Evaluation of New Bone Formation Using Autogenous Tooth Bone Graft Combined with Platelet-Rich Fibrin in Calvarial Defects

The purpose of the present study was to evaluate the contributions of autogenous tooth bone graft (ATBG) combined with platelet-rich fibrin (PRF) on new bone formation and bone morphogenetic protein (BMP)-2 in rabbit calvarial defects. Twelve male New Zealand rabbits were used in this study. Three circular bone defects were prepared in each rabbit with a drill. These defects were divided into 3 groups: control, treated with ATBG, and treated with ATBG+PRF. The animals were sacrificed at 28 days. Samples were evaluated by histomorphometric analyses and total augmented area, new bone area and bone density were calculated. In addition, expression of BMP-2 was determined by immunohistochemical staining. The total augmented area, new bone area and bone density were significantly greater in the ATBG group than in the control group (P <0.05). Also, these values were significantly higher in the ATBG+PRF group than the ATBG group (P <0.05). Test groups demonstrated significantly increased BMP-2 levels compared with the control group (P <0.05). The present study suggested that ATBG combined with PRF significantly increased the new bone formation and enhanced bone healing in cranial defects.

Combining autologous particulate dentin, L-PRF, and fibrinogen to create a matrix for predictable ridge preservation: a pilot clinical study

OBJECTIVES

The aim of this study was to describe the histological and clinical outcome of "dentin block" (a mixture of autologous particulate dentin, leukocyte- and platelet-rich fibrin (L-PRF), and liquid fibrinogen) in alveolar ridge preservation.

MATERIAL AND METHODS

Ten extraction sockets were grafted with "dentin block," a mixture of particulate autologous dentin with chopped leukocyte-platelet-rich fibrin (L-PRF) membranes at a 1:1 ratio, and liquid fibrinogen as a binder. Two grafted sites were followed at 4 and 5 months, and 6 sites at 6 months. Biopsies were taken from the core of the grafted site for histologic and histo-morphometric analysis.

RESULTS

All patients completed the study without any adverse event. The vertical and horizontal dimensions of the alveolar ridge were preserved or even increased after 4, 5, or 6 months and remained stable after 6 months of the implant placement. The histological examination revealed a median relative percentage of bone, dentin, and connective tissue of 57.0, 0.9, and 39.3%, respectively. A comparison of samples at different time points (4, 5, and 6 months) showed a progressive increase in the proportion of bone with a decrease in the proportion of dentin. The bone was compact with normal osteocytes and moderate osteoblastic activity. In 4 out of 10 samples, no dentin was observed; in the other samples, it represented 1-5% (with geometric fragments).

CONCLUSIONS

Dentin block showed to be a suitable bone substitute in an alveolar ridges preservation model.

CLINICAL RELEVANCE

The promising results of dentin block as a bone substitute in alveolar ridge preservation could have an important clinical impact considering this biomaterial brings together the regenerative potential of three autologous products with excellent biological and clinical behavior, low risk of adverse effects, and feasible acquisition.

Osteogenic Differentiation and Biocompatibility of Bovine Teeth Scaffold with Rat Adipose-derived Mesenchymal Stem Cells

OBJECTIVE

Adipose-derived mesenchymal stem cells (ADMSCs) have great potential for regenerative medicine. These have been combined with biomaterials such as Bovine teeth that are preferred as a periodontal regeneration material. The main purpose of this study is to evaluate and analyze a biocompatibility test and osteogenic differentiation of bovine teeth scaffold seeded with ADMSCs in vitro.

MATERIALS AND METHODS

A true experimental study with post-test only group design was conducted. Random sampling and Lameshow's formula were used to determine the sample. The scaffold, obtained from bovine teeth as the bone graft material, was analyzed using 3- (4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and its attachment was evaluated by scanning electron microcopy (SEM) and micro-computed tomography with ADMSCs. ADMDSCs attachment present in the bovine teeth scaffold was assessed using SEM at 1-hour, 12-hour, and 24-hour intervals.

STATISTICAL ANALYSIS

Analysis of variance was used to analyze the MTT assay results (p < 0.05) based on normality and homogeneity test (p > 0.05).

RESULTS

The highest viability of cells (97.08%) was found at a concentration of 10% by means of an MTT test (p < 0.05). The results of three-dimensional bovine teeth scaffold showed the average particle size to be 500 µm. ADMSCs cell attachment to the scaffold bovine teeth showed a significant increase in the number of cells attached after 24 hours compared with those at 1 and 12 hours. Alizarin red staining showed an increase in ADMSC osteogenic differentiation after it was combined with bovine teeth scaffold.

CONCLUSION

The scaffold from bovine teeth is biocompatible and accelerates osteogenic differentiation of ADMSC.

Nano-Structured Demineralized Human Dentin Matrix to Enhance Bone and Dental Repair and Regeneration

Demineralized dentin matrix (DDM), derived from human teeth, is an excellent scaffold material with exciting bioactive properties to enhance bone and dental tissue engineering efficacy. In this article, first the nano-structure and bioactive components of the dentin matrix were reviewed. Then the preparation methods of DDM and the resulting properties were discussed. Next, the efficacy of DDM as a bone substitute with in vitro and in vivo properties were analyzed. In addition, the applications of DDM in tooth regeneration with promising results were described, and the drawbacks and future research needs were also discussed. With the extraction of growth factors from DDM and the nano-structural properties of DDM, previous studies also broadened the use of DDM as a bioactive carrier for growth factor delivery. In addition, due to its excellent physical and biological properties, DDM was also investigated for incorporation into other biomaterials design and fabrication, yielding great enhancements in hard tissue regeneration efficacy.

A Pyk2 inhibitor incorporated into a PEGDA-gelatin hydrogel promotes osteoblast activity and mineral deposition

Pyk2 is a non-receptor tyrosine kinase that belongs to the family of focal adhesion kinases. Studies from our laboratory and others demonstrated that mice lacking the Pyk2 gene (Ptk2B) have high bone mass, which was due to increased osteoblast activity, as well as decreased osteoclast activity. It was previously reported that a chemical inhibitor that targets both Pyk2 and its homolog FAK, led to increased bone formation in ovariectomized rats. In the current study, we developed a hydrogel containing poly(ethylene glycol) diacrylate (PEGDA) and gelatin which was curable by visible-light and was suitable for the delivery of small molecules, including a Pyk2-targeted chemical inhibitor. We characterized several critical properties of the hydrogel, including viscosity, gelation time, swelling, degradation, and drug release behavior. We found that a hydrogel composed of PEGDA1000 plus 10% gelatin (P1000:G10) exhibited Bingham fluid behavior that can resist free flowing before in situ polymerization, making it suitable for use as an injectable carrier in open wound applications. The P1000:G10 hydrogel was cytocompatible and displayed a more delayed drug release behavior than other hydrogels we tested. Importantly, the Pyk2-inhibitor-hydrogel retained its inhibitory activity against the Pyk2 tyrosine kinase, and promoted osteoblast activity and mineral deposition in vitro. Overall, our findings suggest that a Pyk2-inhibitor based hydrogel may be suitable for the treatment of craniofacial and appendicular skeletal defects and targeted bone regeneration.

[Dentin matrix in tissue regeneration: a progress report]

Lesions on tissues and organs critically affect quality of life, due to severe tissue defects that are threatening. Tissue repair and functional reconstruction are concurrent challenges in modern medicine. Tissue engineering brings hope for tissue and organ regeneration. Scaffolds provide a microenvironment for cell growth, proliferation and differentiation. Moreover, scaffolds influence the size and morphology of regenerated tissues. Dentin matrix, which is a natural bioactive and biocompatible scaffold, has become a research hotspot in recent years and has been widely used in tissue engineering. Studies on the use of dentin matrix as scaffolds have made a series of important progress in tooth root, periodontal, dental pulp and bone regeneration. This review demonstrates the biological characteristics of dentin matrix as bioactive scaffolds, describes the application of dentin matrix in tissue regeneration and provides a theoretical basis for the use of a dentin matrix in clinical applications.

In Vitro and In Vivo Dentinogenic Efficacy of Human Dental Pulp-Derived Cells Induced by Demineralized Dentin Matrix and HA-TCP

Human dental pulp cells have been known to have the stem cell features such as self-renewal and multipotency. These cells are differentiated into hard tissue by addition of proper cytokines and biomaterials. Hydroxyapatite-tricalcium phosphates (HA-TCPs) are essential components of hard tissue and generally used as a biocompatible material in tissue engineering of bone. Demineralized dentin matrix (DDM) has been reported to increase efficiency of bone induction. We compared the efficiencies of osteogenic differentiation and in vivo bone formation of HA-TCP and DDM on human dental pulp stem cells (hDPSCs). DDM contains inorganic components as with HA-TCP, and organic components such as collagen type-1. Due to these components, osteoinduction potential of DDM on hDPSCs was remarkably higher than that of HA-TCP. However, the efficiencies of in vivo bone formation are similar in HA-TCP and DDM. Although osteogenic gene expression and bone formation in immunocompromised nude mice were similar levels in both cases, dentinogenic gene expression level was slightly higher in DDM transplantation than in HA-TCP. All these results suggested that in vivo osteogenic potentials in hDPSCs are induced with both HA-TCP and DDM by osteoconduction and osteoinduction, respectively. In addition, transplantation of hDPSCs/DDM might be more effective for differentiation into dentin.

Demineralized dentin matrix scaffolds for alveolar bone engineering

From the point of view of implant dentistry, this review discusses the development and clinical use of demineralized dentin matrix (DDM) scaffolds, produced from the patient's own extracted teeth, to repair alveolar bone defects. The structure and the organic and inorganic components of DDM are presented to emphasize the similarities with autogenous bone. Studies of DDM properties, such as osteoinductive and osteoconductive functions as well as efficacy and safety, which are mandatory for its use as a bone graft substitute, are also presented. The clinical applications of powder, block, and moldable DDM are discussed, along with future developments that can support growth factor and stem cell delivery.

Demineralized Dentin Matrix Induces Odontoblastic Differentiation of Dental Pulp Stem Cells

The aim of this study was to investigate the effect of demineralized dentin matrix (DDM) on dental pulp stem cells (DPSCs) and the potential of complexes with DPSCs and DDM for mineralized tissue formation. Stem cells derived from the dental pulp of healthy pigs aged 18 months were isolated and cultured. DPSCs were incubated with alpha-minimum essential medium treated with DDM extract at 1 mg/ml (DDM1) or 10 mg/ml (DDM10). The concentrations of 3 growth factors in DDM extract was measured by enzyme-linked immunosorbent assay. Adhesion of DPSCs on DDM and hydroxyapatite-tricalcium phosphate (HA-TCP) surfaces was observed using scanning electron microscopy. Cell proliferation was evaluated with cell counting kit-8 and migration by Transwell migration assays. Odontoblastic differentiation was assessed by alkaline phosphatase (ALP) and alizarin red staining, ALP activity and real-time polymerase chain reaction analysis of markers of ALP, runt-related transcription factor 2, type I collagen, dentin matrix acidic phosphoprotein-1, osteonectin and dentin sialophosphoprotein (DSPP). Finally, DPSCs were combined with DDM and placed subcutaneously in nude mice for 12 weeks; DPSCs combined with HA-TCP and DDM alone served as controls. DDM could promote DPSC adhesion, migration and odontoblastic differentiation. Mineralized tissue formation was observed with the DPSC and DDM combination and the DPSC and HA-TCP combination. The mineralized tissue of the DPSC + DDM combination stained positive for DSPP, similar to the dentin tissue. These results indicate that DDM induces DPSC odontoblastic differentiation, suggesting applications for dentin regeneration.

Homogenous demineralized dentin matrix and platelet-rich plasma for bone tissue engineering in cranioplasty of diabetic rabbits: biochemical, radiographic, and histological analysis

This study evaluated the effects of homogenous demineralized dentin matrix (HDDM) slices and platelet-rich plasma (PRP) in surgical defects created in the parietal bones of alloxan-induced diabetic rabbits, treated with a guided bone regeneration technique. Biochemical, radiographic, and histological analyses were performed. Sixty adult New Zealand rabbits were divided into five groups of 12: normoglycaemic (control, C), diabetic (D), diabetic with a PTFE membrane (DM), diabetic with a PTFE membrane and HDDM slices (DM-HDDM), and diabetic with PTFE membrane and PRP (DM-PRP). The quantity and quality of bone mass was greatest in the DM-HDDM group (respective radiographic and histological analyses: at 15 days, 71.70 ± 16.50 and 50.80 ± 1.52; 30 days, 62.73 ± 16.51 and 54.20 ± 1.23; 60 days, 63.03 ± 11.04 and 59.91 ± 3.32; 90 days, 103.60 ± 24.86 and 78.99 ± 1.34), followed by the DM-PRP group (respective radiographic and histological analyses: at 15 days 23.00 ± 2.74 and 20.66 ± 7.45; 30 days 31.92 ± 6.06 and 25.31 ± 5.59; 60 days 25.29 ± 16.30 and 46.73 ± 2.07; 90 days 38.10 ± 14.04 and 53.38 ± 9.20). PRP greatly enhanced vascularization during the bone repair process. Abnormal calcium metabolism was statistically significant in the DM-PRP group (P<0.001) for all four time intervals studied, especially when compared to the DM-HDDM group. Alkaline phosphatase activity was significantly higher in the DM-HDDM group (P<0.001) in comparison to the C, D, and DM-PRP groups, confirming the findings of intense osteoblastic activity and increased bone mineralization. Thus, HDDM promoted superior bone architectural microstructure in bone defects in diabetic rabbits due to its effective osteoinductive and osteoconductive activity, whereas PRP stimulated angiogenesis and red bone marrow formation.

Demineralized Dentin as a Semi-Rigid Barrier for Guiding Periodontal Tissue Regeneration

BACKGROUND

Guided tissue regeneration (GTR) is an accepted approach in the correction of periodontal bone loss. Nonetheless, the deficiencies of commonly applied absorbable membrane, such as flexibility and limited osteoconductive and osteoinductive capability, still leave much room for improvement. Thus, the feasibility of applying demineralized dentin tissue to improve the therapeutic effect of GTR in periodontal regeneration was explored.

METHODS

Demineralized dentin was harvested after acid treatment, and its physiochemical properties were assessed in terms of mineralization density, contact angle, three-point test, and cell attachment. Because of its similar characteristics with bone tissue, dentin that had been acid-treated for 6 hours was chosen to repair a periodontal defect using an induced-periodontitis canine model. Histologic measurements were taken to compare its therapeutic effects to an absorbable membrane group and an untreated group.

RESULTS

The demineralized dentin displayed continually decreased hardness and density as the acid etching time was prolonged. Enhanced attachment and spreading of bone marrow mesenchymal stem cells were observed on the 6-hour processed dentin. Furthermore, in the demineralized dentin group, more periodontal tissues were newly formed compared with the biomembrane and untreated groups.

CONCLUSION

Acid etching represents an easy and promising approach to obtain demineralized dentin with desirable properties, similar to bone, for clinical application to promote periodontal tissue regeneration.

Demineralized deciduous tooth as a source of bone graft material: its biological and physicochemical characteristics

OBJECTIVE

To examine structural and physicochemical characteristics of demineralized deciduous tooth powder (DDTP) in relation to demineralization time and to present potential of using DDTP as a bone graft material.

STUDY DESIGN

For structural and physicochemical analysis, scanning electron microscopy, inductively coupled plasma spectrometry, energy-dispersive X-ray analysis, X-ray diffraction analysis, differential scanning calorimetry, and Brunauer-Emmett-Teller surface area analysis were performed. In in vivo experiments, DDTP was grafted in 20 Sprague-Dawley rats' calvarial defects, and radiographic and histologic examination and histomorphometric analysis were performed.

RESULTS

In vitro studies confirmed physicochemical demands for collagen-based bone graft material, such as lowered calcium content, lowered crystallinity of hydroxyapatite, and exposed organic structures to demineralization. In vivo experiment indicated new bone formation in DDTP-grafted sites and gradual resorption of the grafted particles. Defect closure rate was significantly higher in the 8-week DDTP-grafted group compared with control (P < .05).

CONCLUSIONS

Deciduous teeth had structural and physicochemical characteristics suitable for grafting with appropriate demineralization. Bone healing was observed to have successfully occurred in DDTP-grafted sites.

Effects of ginsenoside Rg-1 on the proliferation and osteogenic differentiation of human periodontal ligament stem cells

OBJECTIVE

To evaluate the effects of ginsenoside Rg-1 on the proliferation and osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs) and to explore the possible application on the alveolar bone regeneration.

METHODS

To determine the optimum concentration, the effects of ginsenoside Rg-1 ranging from 10 to 100 μmol/L were evaluated by 3-(4,5)-dimethylthiahiazo(-z-y1)-3,5-di-phenytetrazoliumromide, alkaline phosphatase activity and calcium deposition. Expressions of runt-related transcription factor 2, collagen alpha-2(I) chain, osteopontin, osteocalcin protein were examined using real-time polymerase chain reaction.

RESULTS

Compared with the control group, a certain concentration (10 μmol/L) of the Rg-1 solution significantly enhanced the proliferation and osteogenic differentiation of hPDLSCs (P<0.05). However, concentrations that exceeds 100 μmol/L led to cytotoxicity whereas concentrations below 10 nmol/L showed no significant effect as compared with the control.

CONCLUSION

Ginsenoside Rg-1 can enhance the proliferation and osteogenic differentiation of hPDLSCs at an optimal concentration of 10 μmol/L.