Establishment of practical recellularized liver graft for blood perfusion using primary rat hepatocytes and liver sinusoidal endothelial cells

Strategies for decellularization, re-cellularIzation and crosslinking in liver bioengineering

Liver transplantation is the only definitive treatment for end-stage liver disease and its availability is restricted by organ donor shortages. The development of liver bioengineering provides the probability to create a functional alternative to reduce the gap in organ demand and supply. Decellularized liver scaffolds have been widely applied in bioengineering because they can mimic the native liver microenvironment and retain extracellular matrix (ECM) components. Multiple approaches including chemical, physical and biological methods have been developed for liver decellularization in current studies, but a full set of unified criteria has not yet been established. Each method has its advantages and drawbacks that influence the microstructure and ligand landscape of decellularized liver scaffolds. Optimizing a decellularization method to eliminate cell material while retaining as much of the ECM intact as possible is therefore important for biological scaffold applications. Furthermore, crosslinking strategies can improve the biological performance of scaffolds, including reinforcing biomechanics, delaying degradation in vivo and reducing immune rejection, which can better promote the integration of re-cellularized scaffolds with host tissue and influence the reconstruction process. In this review, we aim to present the different liver decellularization techniques, the crosslinking methods to improve scaffold characteristics with crosslinking and the preparation of soluble ECM.

Novel approach for reconstruction of the three-dimensional biliary system in decellularized liver scaffold using hepatocyte progenitors

Reconstruction of the biliary system is indispensable for the regeneration of transplantable liver grafts. Here, we report the establishment of the first continuous three-dimensional biliary system scaffold for bile acid excretion using a novel method. We confirmed the preservation of the liver-derived extracellular matrix distribution in the scaffold. In addition, hepatocyte progenitors decellularized via the bile duct by slow-speed perfusion differentiated into hepatocyte- and cholangiocyte-like cells, mimicking hepatic cords and bile ducts, respectively. Furthermore, qRT-PCR demonstrated increased ALB, BSEP, and AQP8 expression, revealing bile canaliculi- and bile duct-specific genetic patterns. Therefore, we concluded that locally preserved extracellular matrices in the scaffold stimulated hepatic progenitors and provided efficient differentiation, as well as regeneration of a three-dimensional continuous biliary system from hepatic cords through bile ducts. These findings suggest that organ-derived scaffolds can be utilized for the efficient reconstruction of functional biliary systems.

The roles of liver sinusoidal endothelial cells in liver ischemia/reperfusion injury

Liver ischemia/reperfusion injury (IRI) is a major complication after partial hepatectomy and liver transplantation and during hypovolemic shock and hypoxia-related diseases. Liver IRI is a current research hotspot. The early stage of liver IRI is characterized by injury and dysfunction of liver sinusoidal endothelial cells (LSECs), which, along with hepatocytes, are the major cells involved in liver injury. In this review, we elaborate on the roles played by LSECs in liver IRI, including the pathological features of LSECs, LSECs exacerbation of the sterile inflammatory response, LSECs interactions with platelets and the promotion of liver regeneration, and the activation of LSECs autophagy. In addition, we discuss the study of LSECs as therapeutic targets for the treatment of liver IRI and the existing problems when applying LSECs in liver IRI research.

Vascular reconstruction of the decellularized biomatrix for whole-organ engineering-a critical perspective and future strategies

Whole-organ re-engineering is the most challenging goal yet to be achieved in tissue engineering and regenerative medicine. One essential factor in any transplantable and functional tissue engineering is fabricating a perfusable vascular network with macro- and micro-sized blood vessels. Whole-organ development has become more practical with the use of the decellularized organ biomatrix (DOB) as it provides a native biochemical and structural framework for a particular organ. However, reconstructing vasculature and re-endothelialization in the DOB is a highly challenging task and has not been achieved for constructing a clinically transplantable vascularized organ with an efficient perfusable capability. Here, we critically and articulately emphasized factors that have been studied for the vascular reconstruction in the DOB. Furthermore, we highlighted the factors used for vasculature development studies in general and their application in whole-organ vascular reconstruction. We also analyzed in detail the strategies explored so far for vascular reconstruction and angiogenesis in the DOB for functional and perfusable vasculature development. Finally, we discussed some of the crucial factors that have been largely ignored in the vascular reconstruction of the DOB and the future directions that should be addressed systematically.

The construction of elastin-like polypeptides and their applications in drug delivery system and tissue repair

Elastin-like polypeptides (ELPs) are thermally responsive biopolymers derived from natural elastin. These peptides have a low critical solution temperature phase behavior and can be used to prepare stimuli-responsive biomaterials. Through genetic engineering, biomaterials prepared from ELPs can have unique and customizable properties. By adjusting the amino acid sequence and length of ELPs, nanostructures, such as micelles and nanofibers, can be formed. Correspondingly, ELPs have been used for improving the stability and prolonging drug-release time. Furthermore, ELPs have widespread use in tissue repair due to their biocompatibility and biodegradability. Here, this review summarizes the basic property composition of ELPs and the methods for modulating their phase transition properties, discusses the application of drug delivery system and tissue repair and clarifies the current challenges and future directions of ELPs in applications.

Mechanobiology of portal hypertension

The interplay between mechanical stimuli and cellular mechanobiology orchestrates the physiology of tissues and organs in a dynamic balance characterized by constant remodelling and adaptative processes. Environmental mechanical properties can be interpreted as a complex set of information and instructions that cells read continuously, and to which they respond. In cirrhosis, chronic inflammation and injury drive liver cells dysfunction, leading to excessive extracellular matrix deposition, sinusoidal pseudocapillarization, vascular occlusion and parenchymal extinction. These pathological events result in marked remodelling of the liver microarchitecture, which is cause and result of abnormal environmental mechanical forces, triggering and sustaining the long-standing and progressive process of liver fibrosis. Multiple mechanical forces such as strain, shear stress, and hydrostatic pressure can converge at different stages of the disease until reaching a point of no return where the fibrosis is considered non-reversible. Thereafter, reciprocal communication between cells and their niches becomes the driving force for disease progression. Accumulating evidence supports the idea that, rather than being a passive consequence of fibrosis and portal hypertension (PH), mechanical force-mediated pathways could themselves represent strategic targets for novel therapeutic approaches. In this manuscript, we aim to provide a comprehensive review of the mechanobiology of PH, by furnishing an introduction on the most important mechanisms, integrating these concepts into a discussion on the pathogenesis of PH, and exploring potential therapeutic strategies.

Whole Liver Derived Acellular Extracellular Matrix for Bioengineering of Liver Constructs: An Updated Review

Biomaterial templates play a critical role in establishing and bioinstructing three-dimensional cellular growth, proliferation and spatial morphogenetic processes that culminate in the development of physiologically relevant in vitro liver models. Various natural and synthetic polymeric biomaterials are currently available to construct biomimetic cell culture environments to investigate hepatic cell-matrix interactions, drug response assessment, toxicity, and disease mechanisms. One specific class of natural biomaterials consists of the decellularized liver extracellular matrix (dECM) derived from xenogeneic or allogeneic sources, which is rich in bioconstituents essential for the ultrastructural stability, function, repair, and regeneration of tissues/organs. Considering the significance of the key design blueprints of organ-specific acellular substrates for physiologically active graft reconstruction, herein we showcased the latest updates in the field of liver decellularization-recellularization technologies. Overall, this review highlights the potential of acellular matrix as a promising biomaterial in light of recent advances in the preparation of liver-specific whole organ scaffolds. The review concludes with a discussion of the challenges and future prospects of liver-specific decellularized materials in the direction of translational research.

Current Challenges and Future Promise for Use of Extracellular Matrix Scaffold to Achieve the Whole Organ Tissue Engineering Moonshot

Whole organ tissue engineering encompasses a variety of approaches, including 3D printed tissues, cell-based self-assembly, and cellular incorporation into synthetic or xenogeneic extracellular matrix (ECM) scaffolds. This review article addresses the importance of whole organ tissue engineering for various solid organ applications, focusing on the use of extracellular (ECM) matrix scaffolds in such engineering endeavors. In this work, we focus on the emerging barriers to translation of ECM scaffold-based tissue-engineered organs and highlight potential solutions to overcome the primary challenges in the field. The 3 main factors that are essential for developing ECM scaffold-based whole organs are (1) recapitulation of a functional vascular tree, (2) delivery and orientation of cells into parenchymal void spaces left vacant in the scaffold during the antigen elimination and associated cellular removal processes, and (3) driving differentiation of delivered cells toward the appropriate site-specific lineage. The insights discussed in this review will allow the potential of allogeneic or xenogeneic ECM scaffolds to be fully maximized for future whole organ tissue-engineering efforts.

Application of decellularization-recellularization technique in plastic and reconstructive surgery

ABSTRACT

In the field of plastic and reconstructive surgery, the loss of organs or tissues caused by diseases or injuries has resulted in challenges, such as donor shortage and immunosuppression. In recent years, with the development of regenerative medicine, the decellularization-recellularization strategy seems to be a promising and attractive method to resolve these difficulties. The decellularized extracellular matrix contains no cells and genetic materials, while retaining the complex ultrastructure, and it can be used as a scaffold for cell seeding and subsequent transplantation, thereby promoting the regeneration of diseased or damaged tissues and organs. This review provided an overview of decellularization-recellularization technique, and mainly concentrated on the application of decellularization-recellularization technique in the field of plastic and reconstructive surgery, including the remodeling of skin, nose, ears, face, and limbs. Finally, we proposed the challenges in and the direction of future development of decellularization-recellularization technique in plastic surgery.

In Vivo Regeneration of Tubular Small Intestine With Motility: A Novel Approach by Orthotopic Transplantation of Decellularized Scaffold

BACKGROUND

Whole-intestine engineering can provide a therapeutic alternative to bowel transplantation. Intestinal components including the mucosa, muscular layer, enteric nervous system, and vasculature must be reestablished as a tubular organ to generate an artificial small intestine. This study proposes a novel approach to produce a transplantable, well-organized tubular small intestine using a decellularized scaffold.

METHODS

Male Lewis rat intestines were used to generate decellularized scaffolds. Patch or tubular grafts were prepared from the decellularized intestine and transplanted into the rat intestine orthotopically. Histological analysis of the decellularized intestine was performed up to 12 wk after transplantation.

RESULTS

Histological examination revealed abundant vascularization into the decellularized patch graft 1 wk after transplantation. Muscular and nervous components, as well as cryptogenesis, were observed in the decellularized patch graft 2 wk after transplantation. Sixteen of the 18 rats survived with normal intake of food and water after the decellularized tubular graft transplantation. Compared with silicone tube grafts, the decellularized tubular grafts significantly promoted the infiltration and growth of intestinal components including the mucosa, muscular layer, and nerve plexus from the recipients. Circular and longitudinal muscle with a well-developed myenteric plexus was regenerated, and intestinal motility was confirmed in the decellularized tubular graft 12 wk after transplantation.

CONCLUSIONS

Orthotopic transplantation of decellularized intestine enhanced the reconstruction of the well-organized tubular small intestine with an enteric nervous system in vivo. Our method using a decellularized scaffold represents a promising approach toward whole-intestine engineering and provides a therapeutic alternative for the irreversible intestinal failure.

Engineering orthotopic tumor spheroids with organ-specific vasculatures for local chemoembolization evaluation

Developing a three-dimensional (3D) in vitro tumor model with vasculature systems suitable for testing endovascular interventional therapies remains a challenge. Here we develop an orthotopic liver tumor spheroid model that captures the organ-level complexity of vasculature systems and the extracellular matrix to evaluate transcatheter arterial chemoembolization (TACE) treatment. The orthotopic tumor spheroids are derived by seeding HepG2 cell colonies with controlled size and location surrounding the portal triads in a decellularized rat liver matrix and are treated by clinically relevant drug-eluting beads embolized in a portal vein vasculature while maintaining dynamic physiological conditions with nutrient and oxygen supplies through the hepatic vein vasculature. The orthotopic tumor model exhibits strong drug retention inside the spheroids and embolization location-dependent cellular apoptosis responses in an analogous manner to in vivo conditions. Such a tumor spheroid model built in a decellularized scaffold containing organ-specific vasculatures, which closely resembles the unique tumor microenvironment, holds the promise to efficiently assess various diagnostic and therapeutic strategies for endovascular therapies.

Orthotopic Transplantation of Functional Bioengineered Livers in Rats

Functional bioengineered livers (FBLs) are promising alternatives to orthotopic liver transplantation. However, orthotopic transplantation of FBLs has not yet been reported. This study aimed to perform the orthotopic transplantation of FBLs in rats subjected to complete hepatectomy. FBLs were developed using rat whole decellularized liver scaffolds (DLSs) with human umbilical vein endothelial cells implanted via the portal vein, and human bone marrow mesenchymal stem cells (hBMSCs) and mouse hepatocyte cell line implanted via the bile duct. FBLs were evaluated in terms of endothelial barrier function, biosynthesis, and metabolism and orthotopically transplanted into rats to determine the survival benefit. The FBLs with well-organized vascular structures exhibited endothelial barrier function, with reduced blood cell leakage. The implanted hBMSCs and hepatocyte cell line were well aligned in the parenchyma of the FBLs. The high levels of urea, albumin, and glycogen in the FBLs indicated biosynthesis and metabolism. Orthotopic transplantation of FBLs achieved a survival time of 81.38 ± 4.263 min in rats (n = 8) subjected to complete hepatectomy, whereas control animals (n = 4) died within 30 min (p < 0.001). After transplantation, CD90-positive hBMSCs and the albumin-positive hepatocyte cell line were scattered throughout the parenchyma, and blood cells were limited within the vascular lumen of the FBLs. In contrast, the parenchyma and vessels were filled with blood cells in the control grafts. Thus, orthotopic transplantation of whole DLS-based FBLs can effectively prolong the survival of rats subjected to complete hepatectomy. In summary, this work was the first to perform the orthotopic transplantation of FBLs, with limited survival benefits, which still has important value for the advancement of bioengineered livers.

Bioengineering liver tissue by repopulation of decellularised scaffolds

Liver transplantation is the only curative therapy for end stage liver disease, but is limited by the organ shortage, and is associated with the adverse consequences of immunosuppression. Repopulation of decellularised whole organ scaffolds with appropriate cells of recipient origin offers a theoretically attractive solution, allowing reliable and timely organ sourcing without the need for immunosuppression. Decellularisation methodologies vary widely but seek to address the conflicting objectives of removing the cellular component of tissues whilst keeping the 3D structure of the extra-cellular matrix intact, as well as retaining the instructive cell fate determining biochemicals contained therein. Liver scaffold recellularisation has progressed from small rodent in vitro studies to large animal in vivo perfusion models, using a wide range of cell types including primary cells, cell lines, foetal stem cells, and induced pluripotent stem cells. Within these models, a limited but measurable degree of physiologically significant hepatocyte function has been reported with demonstrable ammonia metabolism in vivo. Biliary repopulation and function have been restricted by challenges relating to the culture and propagations of cholangiocytes, though advances in organoid culture may help address this. Hepatic vasculature repopulation has enabled sustainable blood perfusion in vivo, but with cell types that would limit clinical applications, and which have not been shown to have the specific functions of liver sinusoidal endothelial cells. Minority cell groups such as Kupffer cells and stellate cells have not been repopulated. Bioengineering by repopulation of decellularised scaffolds has significantly progressed, but there remain significant experimental challenges to be addressed before therapeutic applications may be envisaged.

Advances in Recellularization of Decellularized Liver Grafts with Different Liver (Stem) Cells: Towards Clinical Applications

Liver transplantation is currently the only curative therapy for patients with acute or chronic liver failure. However, a dramatic gap between the number of available liver grafts and the number of patients on the transplantation waiting list emphasizes the need for valid liver substitutes. Whole-organ engineering is an emerging field of tissue engineering and regenerative medicine. It aims to generate transplantable and functional organs to support patients on transplantation waiting lists until a graft becomes available. It comprises two base technologies developed in the last decade; (1) organ decellularization to generate a three-dimensional (3D) extracellular matrix scaffold of an organ, and (2) scaffold recellularization to repopulate both the parenchymal and vascular compartments of a decellularized organ. In this review article, recent advancements in both technologies, in relation to liver whole-organ engineering, are presented. We address the potential sources of hepatocytes and non-parenchymal liver cells for repopulation studies, and the role of stem-cell-derived liver progeny is discussed. In addition, different cell seeding strategies, possible graft modifications, and methods used to evaluate the functionality of recellularized liver grafts are outlined. Based on the knowledge gathered from recent transplantation studies, future directions are summarized.

Liver ductal organoids reconstruct intrahepatic biliary trees in decellularized liver grafts

Three-dimensional scaffolds decellularized from native organs are a promising technique to establish engineered liver grafts and overcome the current shortage of donor organs. However, limited sources of bile duct cells and inappropriate cell distribution in bioengineered liver grafts have hindered their practical application. Organoid technology is anticipated to be an excellent tool for the advancement of regenerative medicine. In the present study, we reconstructed intrahepatic bile ducts in a rat decellularized liver graft by recellularization with liver ductal organoids. Using an ex vivo perfusion culture system, we demonstrated the biliary characteristics of repopulated mouse liver organoids, which maintained bile duct markers and reconstructed biliary tree-like networks with luminal structures. We also established a method for the co-recellularization with engineered bile ducts and primary hepatocytes, revealing the appropriate cell distribution to mimic the native liver. We then utilized this model in human organoids to demonstrate the reconstructed bile ducts. Our results show that liver ductal organoids are a potential cell source for bile ducts from bioengineered liver grafts using three-dimensional scaffolds.

Decellularized extracellular matrix scaffolds: Recent trends and emerging strategies in tissue engineering

The application of scaffolding materials is believed to hold enormous potential for tissue regeneration. Despite the widespread application and rapid advance of several tissue-engineered scaffolds such as natural and synthetic polymer-based scaffolds, they have limited repair capacity due to the difficulties in overcoming the immunogenicity, simulating in-vivo microenvironment, and performing mechanical or biochemical properties similar to native organs/tissues. Fortunately, the emergence of decellularized extracellular matrix (dECM) scaffolds provides an attractive way to overcome these hurdles, which mimic an optimal non-immune environment with native three-dimensional structures and various bioactive components. The consequent cell-seeded construct based on dECM scaffolds, especially stem cell-recellularized construct, is considered an ideal choice for regenerating functional organs/tissues. Herein, we review recent developments in dECM scaffolds and put forward perspectives accordingly, with particular focus on the concept and fabrication of decellularized scaffolds, as well as the application of decellularized scaffolds and their combinations with stem cells (recellularized scaffolds) in tissue engineering, including skin, bone, nerve, heart, along with lung, liver and kidney.

Re-Endothelialization of Decellularized Liver Scaffolds: A Step for Bioengineered Liver Transplantation

Bioengineered livers (BELs) are an attractive therapeutic alternative to address the donor organ shortage for liver transplantation. The goal of BELs technology aims at replacement or regeneration of the native human liver. A variety of approaches have been proposed for tissue engineering of transplantable livers; the current review will highlight the decellularization-recellularization approach to BELs. For example, vascular patency and appropriate cell distribution and expansion are critical components in the production of successful BELs. Proper solutions to these components of BELs have challenged its development. Several strategies, such as heparin immobilization, heparin-gelatin, REDV peptide, and anti-CD31 aptamer have been developed to extend the vascular patency of revascularized bioengineered livers (rBELs). Other novel methods have been developed to enhance cell seeding of parenchymal cells and to increase graft functionality during both bench and in vivo perfusion. These enhanced methods have been associated with up to 15 days of survival in large animal (porcine) models of heterotopic transplantation but have not yet permitted extended survival after implantation of BELs in the orthotopic position. This review will highlight both the remaining challenges and the potential for clinical application of functional bioengineered grafts.

Recent Advances in Liver Engineering With Decellularized Scaffold

Liver transplantation is currently the only effective treatment for patients with end-stage liver disease; however, donor liver scarcity is a notable concern. As a result, extensive endeavors have been made to diversify the source of donor livers. For example, the use of a decellularized scaffold in liver engineering has gained considerable attention in recent years. The decellularized scaffold preserves the original orchestral structure and bioactive chemicals of the liver, and has the potential to create a de novo liver that is fit for transplantation after recellularization. The structure of the liver and hepatic extracellular matrix, decellularization, recellularization, and recent developments are discussed in this review. Additionally, the criteria for assessment and major obstacles in using a decellularized scaffold are covered in detail.

Liver scaffolds obtained by decellularization: A transplant perspective in liver bioengineering

Liver transplantation is the only definitive treatment for many diseases that affect this organ, however, its quantity and viability are reduced. The study of liver scaffolds based on an extracellular matrix is a tissue bioengineering strategy with great application in regenerative medicine. Collectively, recent studies suggest that liver scaffold transplantation may assist in reestablishing hepatic function in preclinical diseased animals, which represents a great potential for application as a treatment for patients with liver disease in the future. This review focuses on useful strategies to promote liver scaffold transplantation and the main open questions about this context. We outline the current knowledge about ex vivo bioengineered liver transplantation, including the surgical techniques, recipient survival time, scaffold preparation before transplantation, and liver disease models. We also highlight the current limitations and future directions regarding in vivo bioengineering techniques.

Decellularized Whole-Organ Pre-vascularization: A Novel Approach for Organogenesis

Introduction: Whole-organ decellularization is an attractive approach for three-dimensional (3D) organ engineering. However, progress with this approach is hindered by intra-vascular blood coagulation that occurs after in vivo implantation of the re-cellularized scaffold, resulting in a short-term graft survival. In this study, we explored an alternative approach for 3D organ engineering through an axial pre-vascularization approach and examined its suitability for pancreatic islet transplantation.

Methods: Whole livers from male Lewis rats were decellularized through sequential arterial perfusion of detergents. The decellularized liver scaffold was implanted into Lewis rats, and an arteriovenous bundle was passed through the scaffold. At the time of implantation, fresh bone marrow preparation (BM; n = 3), adipose-derived stem cells (ADSCs; n = 4), or HBSS (n = 4) was injected into the scaffold through the portal vein. After 5 weeks, around 2,600 islet equivalents (IEQs) were injected through the portal vein of the scaffold. The recipient rats were rendered diabetic by the injection of 65 mg/kg STZ intravenously 1 week before islet transplantation and were followed up after transplantation by measuring the blood glucose and body weight for 30 days. Intravenous glucose tolerance test was performed in the cured animals, and samples were collected for immunohistochemical (IHC) analyses. Micro-computed tomography (CT) images were obtained from one rat in each group for representation.

Results: Two rats in the BM group and one in the ADSC group showed normalization of blood glucose levels, while one rat from each group showed partial correction of blood glucose levels. In contrast, no rats were cured in the HBSS group. Micro-CT showed evidence of sprouting from the arteriovenous bundle inside the scaffold. IHC analyses showed insulin-positive cells in all three groups. The number of von-Willebrand factor-positive cells in the islet region was higher in the BM and ADSC groups than in the HBSS group. The number of 5-bromo-2′-deoxyuridine-positive cells was significantly lower in the BM group than in the other two groups.

Conclusions: Despite the limited numbers, the study showed the promising potential of the pre-vascularized whole-organ scaffold as a novel approach for islet transplantation. Both BM- and ADSCs-seeded scaffolds were superior to the acellular scaffold.

Stem Cell-based Therapy Strategy for Hepatic Fibrosis by Targeting Intrahepatic Cells

The whole liver transplantation is the most effective treatment for end-stage fibrosis. However, the lack of available donors, immune rejection and total cost of surgery remain as the key challenges in advancing liver fibrosis therapeutics. Due to the multi-differentiation and low immunogenicity of stem cells, treatment of liver fibrosis with stem cells has been considered as a valuable new therapeutic modality. The pathological progression of liver fibrosis is closely related to the changes in the activities of intrahepatic cells. Damaged hepatocytes, activated Kupffer cells and other inflammatory cells lead to hepatic stellate cells (HSCs) activation, further promoting apoptosis of damaged hepatocytes, while stem cells can work on fibrosis-related intrahepatic cells through relevant transduction pathways. Herein, this article elucidates the phenomena and the mechanisms of the crosstalk between various types of stem cells and intrahepatic cells including HSCs and hepatocytes in the treatment of liver fibrosis. Then, the important influences of chemical compositions, mechanical properties and blood flow on liver fibrosis models with stem cell treatment are emphasized. Clinical trials on stem cell-based therapy for liver fibrosis are also briefly summarized. Finally, continuing challenges and future directions of stem cell-based therapy for hepatic fibrosis are discussed. In short, stem cells play an important advantage and have a great potential in treating liver fibrosis by interacting with intrahepatic cells. Clarifying how stem cells interact with intrahepatic cells to change the progression of liver fibrosis is of great significance for a deeper understanding of liver fibrosis mechanisms and targeted therapy.

Functional characterization of a bioengineered liver after heterotopic implantation in pigs

Organ bioengineering offers a promising solution to the persistent shortage of donor organs. However, the progression of this technology toward clinical use has been hindered by the challenges of reconstituting a functional vascular network, directing the engraftment of specific functional cell types, and defining appropriate culture conditions to concurrently support the health and phenotypic stability of diverse cell lineages. We previously demonstrated the ability to functionally reendothelialize the vasculature of a clinically scaled decellularized liver scaffold with human umbilical vein endothelial cells (HUVECs) and to sustain continuous perfusion in a large animal recovery model. We now report a method for seeding and engrafting primary porcine hepatocytes into a bioengineered liver (BEL) scaffold previously reendothelialized with HUVECs. The resulting BELs were competent for albumin production, ammonia detoxification and urea synthesis, indicating the presence of a functional hepatocyte compartment. BELs additionally slowed ammonia accumulation during in vivo perfusion in a porcine model of surgically induced acute liver failure. Following explant of the graft, BEL parenchyma showed maintenance of canonical endothelial and hepatocyte markers. Taken together, these results support the feasibility of engineering a clinically scaled functional BEL and establish a platform for optimizing the seeding and engraftment of additional liver specific cells.

Investigation of vessel occlusion during cell seeding process

The seeding of cells into an organ is an important step in cell therapy because the final functional properties of the organ are related to the initial cell distribution throughout the organ. However, vessel occlusion is a serious problem that prevents uniform distribution of the cells in the entire organ. Understanding the mechanism of vessel occlusion can help optimize the seeding process. In this study, the vessel occlusion phenomenon under perfusion conditions during cell seeding was investigated. First, we applied a microfluidic system that enabled the observation of the occlusion events during injection. Second, we applied a multiphase numerical model that can describe the cell-cell interactions and cell-fluid interactions to investigate the vessel occlusion phenomenon during the seeding process. In particular, the effects of cell concentration and flow rate were investigated. The results indicate the importance of cell-cell interactions and cell-vessel interactions for the occurrence of vessel occlusion. In addition, it is found that the probability of occurrence of vessel occlusion increases with the increase in cell concentration and decrease in flow rate. The simulation model can help determine the optimum parameters to enhance cell seeding efficiency.

Recellularization of Native Tissue Derived Acellular Scaffolds with Mesenchymal Stem Cells

The functionalization of decellularized scaffolds is still challenging because of the recellularization-related limitations, including the finding of the most optimal kind of cell(s) and the best way to control their distribution within the scaffolds to generate native mimicking tissues. That is why researchers have been encouraged to study stem cells, in particular, mesenchymal stem cells (MSCs), as alternative cells to repopulate and functionalize the scaffolds properly. MSCs could be obtained from various sources and have therapeutic effects on a wide range of inflammatory/degenerative diseases. Therefore, in this mini-review, we will discuss the benefits using of MSCs for recellularization, the factors affecting their efficiency, and the drawbacks that may need to be overcome to generate bioengineered transplantable organs.

Cell Therapy and Bioengineering in Experimental Liver Regenerative Medicine: In Vivo Injury Models and Grafting Strategies

Purpose of Review

To describe experimental liver injury models used in regenerative medicine, cell therapy strategies to repopulate damaged livers and the efficacy of liver bioengineering.

Recent Findings

Several animal models have been developed to study different liver conditions. Multiple strategies and modified protocols of cell delivery have been also reported. Furthermore, using bioengineered liver scaffolds has shown promising results that could help in generating a highly functional cell delivery system and/or a whole transplantable liver.

Summary

To optimize the most effective strategies for liver cell therapy, further studies are required to compare among the performed strategies in the literature and/or innovate a novel modifying technique to overcome the potential limitations. Coating of cells with polymers, decellularized scaffolds, or microbeads could be the most appropriate solution to improve cellular efficacy. Besides, overcoming the problems of liver bioengineering may offer a radical treatment for end-stage liver diseases.

Assembly and Function of a Bioengineered Human Liver for Transplantation Generated Solely from Induced Pluripotent Stem Cells

The availability of an autologous transplantable auxiliary liver would dramatically affect the treatment of liver disease. Assembly and function in vivo of a bioengineered human liver derived from induced pluripotent stem cells (iPSCs) has not been previously described. By improving methods for liver decellularization, recellularization, and differentiation of different liver cellular lineages of human iPSCs in an organ-like environment, we generated functional engineered human mini livers and performed transplantation in a rat model. Whereas previous studies recellularized liver scaffolds largely with rodent hepatocytes, we repopulated not only the parenchyma with human iPSC-hepatocytes but also the vascular system with human iPS-endothelial cells, and the bile duct network with human iPSC-biliary epithelial cells. The regenerated human iPSC-derived mini liver containing multiple cell types was tested in vivo and remained functional for 4 days after auxiliary liver transplantation in immunocompromised, engineered (IL2rg^-/-) rats.

Metformin regulates the Th17/Treg balance by glycolysis with TIGAR in hepatic ischemia-reperfusion injury

The balance of Th17/Treg plays an important role in hepatic ischemia-reperfusion (I/R) injury. Glycolysis and glutaminolysis for energy metabolism governs the differentiate of CD 4+ T-cells to Th17/Treg. Metformin can regulate glucose metabolism in the liver, but its protective effect on I/R liver injury and its effect on Th17/Treg balancestill unknown. In this study, the I/R liver injury rat model and the primary hepatocyte hypoxia/reoxygenation injury model were established. The biochemical indexes, inflammatory factor indexes, Th17/Treg balance and energy metabolism were evaluated. RNA-seq and gene knockout cells were used to investigated the target protein of metformin. The results showed that metformin could effectively improve liver injury caused by I/R, significantly inhibit the glycolysis, improve the Th17/Treg balance, and inhibit the expression of inflammatory factors. RNA-seq results showed that TIGAR was a possible regulatory site of metformin. However, the protective effect and the regulating effect of Th17/Treg balance by metformin in TIGAR knock-out cells were disappeared. In conclusion, metformin could regulate TIGAR inhibit glycolysis then regulate Th17/Treg balance, inhibit the release of liver inflammatory factors, and finally play a role in inhibiting the occurrence of liver injury caused by ischemia-reperfusion.

A Perfusion Bioreactor for Longitudinal Monitoring of Bioengineered Liver Constructs

In the field of in vitro liver disease models, decellularised organ scaffolds maintain the original biomechanical and biological properties of the extracellular matrix and are established supports for in vitro cell culture. However, tissue engineering approaches based on whole organ decellularized scaffolds are hampered by the scarcity of appropriate bioreactors that provide controlled 3D culture conditions. Novel specific bioreactors are needed to support long-term culture of bioengineered constructs allowing non-invasive longitudinal monitoring. Here, we designed and validated a specific bioreactor for long-term 3D culture of whole liver constructs. Whole liver scaffolds were generated by perfusion decellularisation of rat livers. Scaffolds were seeded with Luc⁺HepG2 and primary human hepatocytes and cultured in static or dynamic conditions using the custom-made bioreactor. The bioreactor included a syringe pump, for continuous unidirectional flow, and a circuit built to allow non-invasive monitoring of culture parameters and media sampling. The bioreactor allowed non-invasive analysis of cell viability, distribution, and function of Luc⁺HepG2-bioengineered livers cultured for up to 11 days. Constructs cultured in dynamic conditions in the bioreactor showed significantly higher cell viability, measured with bioluminescence, distribution, and functionality (determined by albumin production and expression of CYP enzymes) in comparison to static culture conditions. Finally, our bioreactor supports primary human hepatocyte viability and function for up to 30 days, when seeded in the whole liver scaffolds. Overall, our novel bioreactor is capable of supporting cell survival and metabolism and is suitable for liver tissue engineering for the development of 3D liver disease models.

Functionalized Vascular Structure in Bioengineered Liver Identified with Proteomics

Vascularization has been a major challenge in the development of a bioengineered liver. We aimed to develop a functionalized vascular structure in bioengineered liver and to identify the biological vascularization processes at different time points using proteomics. Decellularized rat liver scaffolds were vascularized with human umbilical vein endothelial cells (HUVECs) for 1, 3, 7, 14, and 21 days. HUVECs adhered to the internal surface and formed a functional barrier structure within 7 days. Vascularized liver scaffolds with biological activity were sustained for more than 21 days in vitro. Proteomics analysis indicated distinct characteristics after 14 days of culture compared with other time points. The biological processes of proteins expressed at days 1, 3, and 7 mainly involved cell adhesion, protein synthesis, and energy metabolism; however, different biological processes associated with muscle contraction and muscle filament sliding were identified at days 14 and 21. Coexpressed proteins at days 14 and 21 participated in 7 biological processes that could be classified as angiogenesis, myogenesis, or vascular function. Furthermore, the validation of related proteins revealed that basement membrane assembly, phenotype plasticity of HUVECs, and the regulation of adherence junctions contribute to the formation of a functionalized vascular structure. The biological vascularization processes at different time points identified with proteomics revealed development characteristics of vascular structure in a bioengineered liver, and at least 14 days of in vitro culture should be recommended for developing a functionalized vascular structure. This study may help to provide a better understanding of the mechanism of vascularization and facilitate the construction of a functional bioengineered liver for future clinical applications.

Portal venous repopulation of decellularised rat liver scaffolds with syngeneic bone marrow stem cells

Liver transplantation is the only life-saving treatment for end-stage liver failure but is limited by the organ shortage and consequences of immunosuppression. Repopulation of decellularised scaffolds with recipient cells provides a theoretical solution, allowing reliable and timely organ sourcing without the need for immunosuppression. Recellularisation of the vasculature of decellularised liver scaffolds was investigated as an essential prerequisite to the survival of other parenchymal components. Liver decellularisation was carried out by portal vein perfusion using a detergent-based solution. Decellularised scaffolds were placed in a sterile perfusion apparatus consisting of a sealed organ chamber, functioning at 37°C in normal atmospheric conditions. The scaffold was perfused via portal vein with culture medium. A total of 10⁷ primary cultured bone marrow stem cells, selected by plastic adherence, were infused into the scaffold, after which repopulated scaffolds were perfused for up to 30 days. The cultured stem cells were assessed for key marker expression using fluorescence-activated cell sorting (FACS), and recellularised scaffolds were analysed by light, electron and immunofluorescence microscopy. Stem cells were engrafted in portal, sinusoidal and hepatic vein compartments, with cell alignment reminiscent of endothelium. Cell surface marker expression altered following engraftment, from haematopoietic to endothelial phenotype, and engrafted cells expressed sinusoidal endothelial endocytic receptors (mannose, Fc and stabilin receptors). These results represent one step towards complete recellularisation of the liver vasculature and progress towards the objective of generating transplantable neo-organs.

Conjugating homogenized liver-extracellular matrix into decellularized hepatic scaffold for liver tissue engineering

The generation of a transplantable liver scaffold is crucial for the treatment of end-stage liver failure. Unfortunately, decellularized liver scaffolds suffer from lack of bioactive molecules and functionality. In this study, we conjugated homogenized liver-extracellular matrix (ECM) into a decellularized liver in a rat model to improve its structural and functional properties. The homogenized ECM was prepared, characterized, and subsequently perfused into ethyl carbodiimide hydrochloride (EDC)/N-hydroxysuccinimide (NHS) activated liver scaffolds. Various techniques were performed to confirm the improvements that were accomplished through the conjugation process; these included micro/ultra-structural analyses, biochemical analysis of ECM components, DNA quantification, swelling ratio, structural stability, calcification properties, platelet activation study, static and dynamic seeding with EAhy926 endothelial cells and HepG2 hepatocarcinoma cells, subcutaneous implantation and intrahepatic transplantation. The results showed that the conjugated scaffolds have superior micro- and ultrastructural and biochemical characteristics. In addition, DNA contents, swelling ratios, calcification properties, platelet reactions, and host inflammatory reactions were not altered with the conjugation process. The conjugated scaffolds revealed better cellular spreading and popularity compared to the non-conjugated scaffolds. Intrahepatic transplantation showed that the conjugated scaffold had higher popularity of hepatic regenerative cells with better angiogenesis. The conjugation of the decellularized liver scaffold with homogenized liver-ECM is a promising tool to improve the quality of the generated scaffold for further transplantation.

3D Culture System for Liver Tissue Mimicking Hepatic Plates for Improvement of Human Hepatocyte (C3A) Function and Polarity

In vitro 3D hepatocyte culture constitutes a core aspect of liver tissue engineering. However, conventional 3D cultures are unable to maintain hepatocyte polarity, functional phenotype, or viability. Here, we employed microfluidic chip technology combined with natural alginate hydrogels to construct 3D liver tissues mimicking hepatic plates. We comprehensively evaluated cultured hepatocyte viability, function, and polarity. Transcriptome sequencing was used to analyze changes in hepatocyte polarity pathways. The data indicate that, as culture duration increases, the viability, function, polarity, mRNA expression, and ultrastructure of the hepatic plate mimetic 3D hepatocytes are enhanced. Furthermore, hepatic plate mimetic 3D cultures can promote changes in the bile secretion pathway via effector mechanisms associated with nuclear receptors, bile uptake, and efflux transporters. This study provides a scientific basis and strong evidence for the physiological structures of bionic livers prepared using 3D cultures. The systems and cultured liver tissues described here may serve as a better in vitro 3D culture platform and basic unit for varied applications, including drug development, hepatocyte polarity research, bioartificial liver bioreactor design, and tissue and organ construction for liver tissue engineering or cholestatic liver injury.

Therapeutic targets for liver regeneration after acute severe injury: a preclinical overview

Introduction: Liver transplantation is the only viable treatment with a proven survival benefit for acute liver failure (ALF). Donor organ shortage is, however, a major hurdle; hence, alternative approaches that enable liver regeneration and target acute severe hepatocellular damage are necessary.Areas covered: This article sheds light on therapeutic targets for liver regeneration and considers their therapeutic potential. ALF following extensive hepatocyte damage and small-for-size syndrome (SFSS) are illuminated for the reader while the molecular mechanisms of liver regeneration are assessed in accordance with relevant therapeutic strategies. Furthermore, liver background parameters and predictive biomarkers that might associate with liver regeneration are reviewed.Expert opinion: There are established and novel experimental strategies for liver regeneration to prevent ALF resulting from SFSS. Granulocyte-colony stimulating factor (G-CSF) is a promising agent targeting liver regeneration after acute severe injury. Autophagy and hepatocyte senescence represent attractive new targets for liver regeneration in acute severe hepatic injury. Liver support strategies, including tissue engineering, constitute novel regenerative means; the success of this is dependent on stem cell research advances. However, there is no firm clinical evidence that these supportive strategies may alleviate hepatocellular damage until liver transplantation becomes available or successful self-liver regeneration occurs.

A Survival Model of In Vivo Partial Liver Lobe Decellularization Towards In Vivo Liver Engineering

In vivo liver decellularization has become a promising strategy to study in vivo liver engineering. However, long-term survival after in vivo liver decellularization has not yet been achieved due to anatomical and technical challenges. This study aimed at establishing a survival model of in vivo partial liver lobe perfusion-decellularization in rats. We compared three decellularization protocols (1% Triton X100 followed by 1% sodium dodecyl sulfate [SDS], 1% SDS vs. 1% Triton X100, n = 6/group). Using the optimal one as judged by macroscopy, histology and DNA content, we characterized the structural integrity and matrix proteins by using histology, scanning electron microscopy, computed tomography scanning, and immunohistochemistry (IHC). We prevented contamination of the abdominal cavity with the corrosive detergents by using polyvinylidene chloride (PVDC) film + dry gauze in comparison to PVDC film + dry gauze + aspiration tube (n = 6/group). Physiological reperfusion was assessed by histology. Survival rate was determined after a 7-day observation period. Only perfusion with 1% SDS resulted in an acellular scaffold (fully translucent without histologically detectable tissue remnants, DNA concentration is <2% of that in native lobe) with remarkable structural and ultrastructural integrity as well as preservation of main matrix proteins (IHC positive for collagen IV, laminin, and elastin). Contamination of abdominal organs with the potentially toxic SDS solution was achieved by placing a suction tube in addition to the PVDC film + dry gauze and allowed a 7-day survival of all animals without severe postoperative complications. On reperfusion, the liver turned red within seconds without any leakage from the surface of the liver. About 12 h after reperfusion, not only blood cells but also some clots were visible in the portal vein, sinusoidal matrix network, and central vein, suggesting physiological perfusion. In conclusion, our results of this study show the first available data on generation of a survival model of in vivo parenchymal organ decellularization, creating a critical step toward in vivo organ engineering. Impact Statement Recently, in vivo liver decellularization has been considered a promising approach to study in vivo liver repopulation of a scaffold compared with ex vivo liver repopulation. However, long-term survival of in vivo liver decellularization has not yet been achieved. Here, despite anatomical and technical challenges, we successfully created a survival model of in vivo selected liver lobe decellularization in rats, providing a major step toward in vivo organ engineering.

Current progress in hepatic tissue regeneration by tissue engineering

Liver, as a vital organ, is responsible for a wide range of biological functions to maintain homeostasis and any type of damages to hepatic tissue contributes to disease progression and death. Viral infection, trauma, carcinoma, alcohol misuse and inborn errors of metabolism are common causes of liver diseases are a severe known reason for leading to end-stage liver disease or liver failure. In either way, liver transplantation is the only treatment option which is, however, hampered by the increasing scarcity of organ donor. Over the past years, considerable efforts have been directed toward liver regeneration aiming at developing new approaches and methodologies to enhance the transplantation process. These approaches include producing decellularized scaffolds from the liver organ, 3D bio-printing system, and nano-based 3D scaffolds to simulate the native liver microenvironment. The application of small molecules and micro-RNAs and genetic manipulation in favor of hepatic differentiation of distinct stem cells could also be exploited. All of these strategies will help to facilitate the application of stem cells in human medicine. This article reviews the most recent strategies to generate a high amount of mature hepatocyte-like cells and updates current knowledge on liver regenerative medicine.

Liver Bioengineering: Promise, Pitfalls, and Hurdles to Overcome

PURPOSE OF REVIEW

In this review, we discuss the recent advancements in liver bioengineering and cell therapy and future advancements to improve the field towards clinical applications.

RECENT FINDINGS

3D printing, hydrogel-based tissue fabrication, and the use of native decellularized liver extracellular matrix as a scaffold are used to develop whole or partial liver substitutes. The current focus is on developing a functional liver graft through achieving a non-leaky endothelium and a fully constructed bile duct. Use of cell therapy as a treatment is less invasive and less costly compared to transplantation, however, lack of readily available cell sources with low or no immunogenicity and contradicting outcomes of clinical trials are yet to be overcome.

SUMMARY

Liver bioengineering is advancing rapidly through the development of in vitro and in vivo tissue and organ models. Although there are major challenges to overcome, through optimization of the current methods and successful integration of induced pluripotent stem cells, the development of readily available, patient-specific liver substitutes can be achieved.

Hepatic microcirculation and mechanisms of portal hypertension

The liver microcirculatory milieu, mainly composed of liver sinusoidal endothelial cells (LSECs), hepatic stellate cells (HSCs) and hepatic macrophages, has an essential role in liver homeostasis, including in preserving hepatocyte function, regulating the vascular tone and controlling inflammation. Liver microcirculatory dysfunction is one of the key mechanisms that promotes the progression of chronic liver disease (also termed cirrhosis) and the development of its major clinical complication, portal hypertension. In the present Review, we describe the current knowledge of liver microcirculatory dysfunction in cirrhotic portal hypertension and appraise the preclinical models used to study the liver circulation. We also provide a comprehensive summary of the promising therapeutic options to target the liver microvasculature in cirrhosis.

Novel hybrid three-dimensional artificial liver using human induced pluripotent stem cells and a rat decellularized liver scaffold

Introduction

Liver transplantation is currently the only curative therapy for end-stage liver failure; however, establishment of alternative treatments is required owing to the serious donor organ shortage. Here, we propose a novel model of hybrid three-dimensional artificial livers using both human induced pluripotent stem cells (hiPSCs) and a rat decellularized liver serving as a scaffold.

Methods

Rat liver harvesting and decellularization were performed as reported in our previous studies. The decellularized liver scaffold was recellularized with hiPSC-derived hepatocyte-like cells (hiPSC-HLCs) through the biliary duct. The recellularized liver graft was continuously perfused with the culture medium using a pump at a flow rate of 0.5 mL/min in a standard CO₂ (5%) cell incubator at 37 °C.

Results

After 48 h of continuous perfusion culture, the hiPSC-HLCs of the recellularized liver distributed into the parenchymal space. Furthermore, the recellularized liver expressed the albumin (ALB) and CYP3A4 genes, and secreted human ALB into the culture medium.

Conclusion

Novel hybrid artificial livers using hiPSCs and rat decellularized liver scaffolds were successfully generated, which possessed human hepatic functions.

•

Human iPSC-derived hepatocytes were engrafted in a rat decellularized liver scaffold.

•

The recellularized liver expressed human liver-related markers ALB and CYP3A4.

•

The recellularized liver scaffold secreted human albumin.

•

This novel model shows potential for artificial whole liver transplantation.

Improving functional re-endothelialization of acellular liver scaffold using REDV cell-binding domain

Engineering of functional vascularized liver tissues holds great promise in addressing donor organ shortage for transplantation. Whole organ decellularization is a cell removal method that retains the native vascular structures of the organ such that it can be anastomosed with the recipient circulation after recellularization with healthy cells. However, a main hurdle to successful implantation of bioengineered organ is the inability to efficiently re-endothelialize the vasculature with a functional endothelium, resulting in blood clotting which is the primary cause of failure in early transplant studies. Here, we present an efficient approach for enhancing re-endothelialization of decellularized rat liver scaffolds by conjugating the REDV cell-binding domain to improve attachment of endothelial cells (EC) on vascular wall surfaces. In order to facilitate expression and purification of the peptide, REDV was fused with elastin-like peptide (ELP) that confers thermally triggered aggregation behavior to the fusion protein. After validating the adhesive properties of the REDV-ELP peptide, we covalently coupled REDV-ELP to the blood vasculature of decellularized rat livers and seeded EC using perfusion of the portal vein. We showed that REDV-ELP increased cell attachment, spreading and proliferation of EC within the construct resulting in uniform endothelial lining of the scaffold vasculature. We further observed that REDV-ELP conjugation dramatically reduced platelet adhesion and activation. Altogether, our results demonstrate that this method allowed functional re-endothelialization of liver scaffold and show great potential toward the generation of functional bioengineered liver for long-term transplantation.

STATEMENT OF SIGNIFICANCE

There is a critical need for novel organ replacement therapies as the grafts for transplantation fall short of demand. Recent advances in tissue engineering, through the use of decellularized scaffolds, have opened the possibility that engineered grafts could be used as substitutes for donor livers. However, successful implantation has been challenged by the inability to create a functional vasculature. Our research study reports a new strategy to increase efficiency of endothelialization by increasing the affinity of the vascular matrix for endothelial cells. We functionalized decellularized liver scaffold using elastin-like peptides grafted with REDV cell binding domain. We showed that REDV-ELP conjugation improve endothelial cell attachment and proliferation within the scaffold, demonstrating the feasibility of re-endothelializing a whole liver vasculature using our technique.

Induction of lung-like cells from mouse embryonic stem cells by decellularized lung matrix

Decellularization of tissues is a recently developed technique mostly used to provide a 3-dimensional matrix structure of the original organ, including decellularized lung tissues for lung transplantation. Based on the results of the present study, we propose new utilization of decellularized tissues as inducers of stem cell differentiation. Decellularized lung matrix (L-Mat) samples were prepared from mouse lungs by SDS treatment, then the effects of L-Mat on differentiation of ES cells into lung cells were investigated. ES cell derived-embryoid bodies (EBs) were transplanted into L-Mat samples and cultured for 2 weeks. At the end of the culture, expressions of lung cell-related markers, such as TTF-1 and SP-C (alveolar type II cells), AQP5 (alveolar type I cells), and CC10 (club cells), were detected in EB outgrowths in L-Mat, while those were not found in EB outgrowths attached to the dish. Our results demonstrated that L-Mat has an ability to induce differentiation of ES cells into lung-like cells.

•

Differentiation of ES cells by decellularized lung matrix (L-Mat) was investigated.

•

L-Mat induced differentiation of various lung cell-like cells from ES cells.

•

L-Mat plays an important role for inducing differentiation of lung cells.

Physical Properties of the Extracellular Matrix of Decellularized Porcine Liver

The decellularization of organs has attracted attention as a new functional methodology for regenerative medicine based on tissue engineering. In previous work we developed an L-ECM (Extracellular Matrix) as a substrate-solubilized decellularized liver and demonstrated its effectiveness as a substrate for culturing and transplantation. Importantly, the physical properties of the substrate constitute important factors that control cell behavior. In this study, we aimed to quantify the physical properties of L-ECM and L-ECM gels. L-ECM was prepared as a liver-specific matrix substrate from solubilized decellularized porcine liver. In comparison to type I collagen, L-ECM yielded a lower elasticity and exhibited an abrupt decrease in its elastic modulus at 37 °C. Its elastic modulus increased at increased temperatures, and the storage elastic modulus value never fell below the loss modulus value. An increase in the gel concentration of L-ECM resulted in a decrease in the biodegradation rate and in an increase in mechanical strength. The reported properties of L-ECM gel (10 mg/mL) were equivalent to those of collagen gel (3 mg/mL), which is commonly used in regenerative medicine and gel cultures. Based on reported findings, the physical properties of the novel functional substrate for culturing and regenerative medicine L-ECM were quantified.

Bioprinting Perfusion-Enabled Liver Equivalents for Advanced Organ-on-a-Chip Applications

Many tissue models have been developed to mimic liver-specific functions for metabolic and toxin conversion in in vitro assays. Most models represent a 2D environment rather than a complex 3D structure similar to native tissue. To overcome this issue, spheroid cultures have become the gold standard in tissue engineering. Unfortunately, spheroids are limited in size due to diffusion barriers in their dense structures, limiting nutrient and oxygen supply. Recent developments in bioprinting techniques have enabled us to engineer complex 3D structures with perfusion-enabled channel systems to ensure nutritional supply within larger, densely-populated tissue models. In this study, we present a proof-of-concept for the feasibility of bioprinting a liver organoid by combining HepaRG and human stellate cells in a stereolithographic printing approach, and show basic characterization under static cultivation conditions. Using standard tissue engineering analytics, such as immunohistology and qPCR, we found higher albumin and cytochrome P₄₅₀ 3A4 (CYP3A4) expression in bioprinted liver tissues compared to monolayer controls over a two-week cultivation period. In addition, the expression of tight junctions, liver-specific bile transporter multidrug resistance-associated protein 2 (MRP2), and overall metabolism (glucose, lactate, lactate dehydrogenase (LDH)) were found to be stable. Furthermore, we provide evidence for the perfusability of the organoids’ intrinsic channel system. These results motivate new approaches and further development in liver tissue engineering for advanced organ-on-a-chip applications and pharmaceutical developments.