A retrospective analysis of the resorption rate of deproteinized bovine bone as maxillary sinus graft material on cone beam computed tomography

Biomechanical Basis for Bone Healing and Osseointegration of Implants in Sinus Grafts

A thorough comprehension of the mechanisms controlling new bone formation and implant osseointegration after maxillary sinus floor elevation is crucial for aligning our treatment choices with biological principles and enhancing clinical outcomes. The goal of bone regeneration in sinus lift procedures is to provide a sufficient amount of newly-formed tissue to support implant osseointegration. However, it is still unclear whether there is a minimum quantity of vital bone within the newly-formed tissue required for effective support, though it is generally assumed that vital bone is essential for this process. The source and integration of new bone in maxillary sinus floor elevation procedures remain debated. Most clinical studies suggest a paramount role for sinus floor and bony walls, with a centripetal pattern of new bone formation, while conflicting reports exist regarding the osteogenic role of the Schneiderian membrane. The influence of mechanical input on peri-implant bone formation, mineralization, and maturation is significant, with bone remodeling regulated by mechanical strains generated during loading. Defining optimal loading for implants, particularly in sinus lift procedures, is challenging, as early loading may damage interfacial tissue, interfering with osteogenesis. Differences in osseointegration dynamics between native and augmented bone may arise from biological and mechanical factors, but also from patient-specific factors which should be evaluated in treatment planning. Factors to consider include sinus anatomy, patient and site-specific regenerative potential, and the selection of graft material that matches the osteogenic and mechanical requirements. Tailored approaches integrating patient-specific considerations and refined implant strategies will enhance predictability and longevity of treatment.

Resorption Rates of Bone Graft Materials after Crestal Maxillary Sinus Floor Elevation and Its Influencing Factors

The aim of this study is to analyze the resorption rate of bone graft materials after crestal sinus floor elevation, study its influencing factors, and improve the long-term success rate of implants after crestal maxillary sinus floor elevation. Measurement and analysis were conducted at six postoperative timepoints (0 months, 6 months, 12 months, 18 months, 24 months, and 30 months) using cone beam computed tomography (CBCT) data on 31 patients from the Chenghuaxinguanghua Dental Clinic who underwent crestal maxillary sinus floor elevation, involving 38 graft sites. The materials resorption rates of the bone graft height (BH) and bone graft width (BW) were assessed. BH and BW resorption rates followed the same trend (p = 0.07), with BH and BW resorption rates decreasing with time (rBH = -0.32, p < 0.01; rBW = -0.18, p < 0.01), and were maximal in the 0-6 month interval, with BH and BW resorption rates of 3.42%/mth and 3.03%/mth, respectively. The average monthly BH and BW resorption rates in the 6-12 month interval rapidly decreased to 1.75%/mth and 1.29%/mth, respectively. The monthly BH and BW resorption rates in the 12-30 month intervals stabilized at 1.45%/mth (p > 0.05) and 1.22%/mth (p > 0.05), respectively. The higher the initial bone graft height (BH0), the lower the BH resorption rates (rBH = -0.98, p < 0.05), and the BW resorption rate was different for different graft sites (p = 0.01). The resorption rates of bone graft materials implanted through crestal maxillary sinus floor elevation decreased rapidly within the first 12 months post operation and remained stable after 12 months. BH0 was identified as a significant factor influencing the resorption rates of bone graft materials. These results could suggest dentists should pay attention to the trend of resorption rates over time and carefully manage the initial height of bone grafts and inspire the research of new bone grafting materials for crestal maxillary sinus floor elevation.

15-Year Retrospective Study on the Success Rate of Maxillary Sinus Augmentation and Implants: Influence of Bone Substitute Type, Presurgical Bone Height, and Membrane Perforation during Sinus Lift

Objectives

To evaluate the success rate of bone grafts and implants carried out at the Latin American Institute for Research and Dental Education (ILAPEO), considering the following: (i) the different pure bone substitutes (autogenous, xenogeneic, and alloplastic), (ii) the presurgical bone height, and (iii) how the treatment is compromised when membrane perforation occurs during sinus lift in maxillary sinus surgeries. Material and Methods. The initial sample comprised 1040 records of maxillary sinus lifting surgeries. After evaluation, the final sample retained 472 grafts performed using the lateral window technique with a total of 757 implants. The grafts were divided into 3 groups: (i) autogenous bone (n = 197), (ii) xenogenous bovine bone (n = 182), and (iii) alloplastic material (n = 93). One calibrated examiner classified the sample into two groups based on the residual bone height (<4 mm and ≥4 mm) of the area of interest measured on parasagittal sections of tomographic images. Data on membrane perforation occurrences in each group were collected; qualitative variables were described using frequency, expressed as percentages. The Chi-square test was used to analyze the success of the graft types and the survival rate of the implants as a function of the grafted material and the residual bone height. The Kaplan-Meier survival analysis was used to calculate the survival rate of bone grafts and implants according to the classifications adopted in this retrospective study.

Results

The success rate of grafts and implants was 98.3% and 97.2%, respectively. There was no statistically significant difference in the success rate among the different bone substitutes (p = 0.140). Only 8 grafts (1.7%) and 21 implants (2.8%) failed. There was a greater success rate for both grafts (96.5%) and implants (97.4%) when the bone height was ≥4 mm. The success rate in the 49 sinuses in which the membrane was perforated was 97.96% for the grafts and 96.2% for the implants. The follow-up periods after rehabilitation ranged from 3 months to 13 years.

Conclusions

Within the limitations of the data analyzed in this retrospective study, maxillary sinus lift was a viable surgical technique that enabled implant placement with a predictable long-term success rate, regardless of the type of material used. The presence of membrane perforation did not interfere with the success rate obtained for grafts and implants.

Influence of the contact area of the sub-antral space with sinus bone and the Schneiderian membrane on osteogenesis in lateral window sinus elevation surgery: a prospective experiment

BACKGROUND

Osteogenesis of lateral window sinus elevation surgery is the key to placement of the subsequent implant, excessive collapse of the sub-antral space may adversely affect long-term stability of implants. At present, few studies focus on the influence of the contact area of the sub-antral space on osteogenesis. This study evaluated whether the change in the contact area of the sub-antral space with maxillary sinus bone and the Schneiderian membrane can affect osteogenesis.

METHODS

Cone beam computed tomography (CBCT) images were collected of patients requiring maxillary sinus floor elevation (residual bone height < 6 mm) for standard-length implant placement before surgery, after surgery, and at 6-month follow-up visits. The postoperative sub-antral space volume (V₁) and surface area (S₁), and the remaining volume after six months of healing (V₂) were measured. Then, the contact area of sub-antral space with maxillary sinus bone (S_bc) and the Schneiderian membrane (S_mc), the absorbed volume during healing (V_a), and the percentage of remaining volume (V₂%) and absorbed volume (V_a%) were calculated. The correlation between anatomical parameters was analyzed using multiple linear regression.

RESULTS

A total of 62 maxillary sinuses from 56 patients were augmented, of which 57 were considered for the final analysis (5 withdrew due to perforation). Multiple linear regression results demonstrated that S_bc was significantly positively correlated with V_a (β coefficient = 0.141, p < 0.01) without correlation between S_mc and V_a (β coefficient =  - 0.046, p = 0.470). There was a positive correlation between S_bc and V₂% (β coefficient = 2.269, p < 0.05).

CONCLUSIONS

This study confirmed that the size of the S_bc in lateral window sinus elevation surgery affected osteogenesis after six months of healing. Clinicians should assess the sinus contour type preoperatively, then consider whether it is necessary to expand the range of the Schneiderian membrane elevation to avoid excessive collapse of the sub-antral space.

TRIAL REGISTRATION

Chinese Clinical Trial Registry (ChiCTR), ChiCTR2200057924. Registered 22 March 2022-Retrospectively registered.

Introduction of Accurate Measurement of the Alveolar Bone Height in Bone Grafting Area after Sinus Lift

BACKGROUND

Sinus lift via the alveolar crest approach has been proven to solve inadequate alveolar bone height perfectly in the posterior region of the maxilla. Nevertheless, the surgical area cannot be directly observed, imaging methods are necessary to reveal whether the surgery has achieved the expected results. Cone-Beam Computed Tomography (CBCT) images are usually taken before surgery and at the completion of final pre-repair osseointegration and evaluate the effect of maxillary sinus lift by measuring the alveolar bone height in the bone graft area. However, there is no uniform and recognized method to accurately measure the alveolar bone height in the bone grafting area before and after maxillary sinus lift. Therefore, the authors propose a simple, accurate, and reproducible method for the measurement of alveolar bone height in maxillary sinus lift on CBCT, which will be an innovation.

METHODS

30 implant cases (30 patients) were included in this study. The authors create a uniformed measurement surface in the CBCT axial interface to ensure consistency at the completion of final prerepair osseointegration and before surgery. Then changes in alveolar bone height in the bone grafting area before and after sinus lift were measured on CBCT coronal and arch planes. Finally, for the purpose of verification of repeatability, three dentists from our department were randomly selected to measure and record the above CBCT data at three different time points.

RESULTS

The data showed that in the CBCT measurements of the three dentists, neither the coronal plane nor the arch plane was statistically significant. (P > 0.05).

CONCLUSION

This measurement method is simple, accurate and repeatable. It can be applied to measure alveolar bone height in the bone grafting area before and after maxillary sinus lift.

Comparison of the effects of three different xenogeneic bone grafts used in sinus augmentation simultaneous with dental implant placement on the survival of the implants and the dimensional changes of the region

BACKGROUND

Xenografts can be produced in various particle sizes by using different bone types. Currently, there is no consensus about the ideal type of xenograft for sinus augmentations, and this choice depends on the personal experience of clinicians. This retrospective study aimed to evaluate the effects of three different xenografts used in sinus augmentation simultaneously with implant placement on the survival of the implants and the dimensional changes of the region.

METHODS

One hundred nine sinus augmentations and 164 implants were evaluated in 76 patients. Three different xenografts were used: 41 Gen-Os^® (250-1000µm, Corticocancellous; Tecnoss, Giaveno, Turin, Italy), 35 Bio-Oss^® (1000-2000µm, Cancellous; Geistlich Biomaterials italia S.r.l., Vicenza, Italy) and 33 Apatos-Cortical^® (600-1000µm, Cortical; Tecnoss). The preoperative, postoperative, and follow-up (21±8.8 month) radiographs were evaluated for the dimensional changes and the implant survivals. The data were statistically analyzed.

RESULTS

Among the implant failures; 3 (5.6%) in 53 implants in Apatos, 2 (3.6%) in 55 implants in Bio-Oss, 9 (16%) in 56 implants in Gen-Os, and 14 (8.5%) total implant failures were observed. This difference between the groups was statistically significant and was due to the high loss rate in the Gen-Os (P=0.044). There was a mean difference of -1.8±1.5mm between the measured bone heights on postoperative day (14.2±2.4mm) and the last follow-up (12.4±2.5 mm). While the loss of height was not affected due to the graft type (P=0.981), the general 12.6% vertical loss was statistically significant (P<0.0001), also the length of implants placed reduced this loss (P=0.036).

CONCLUSIONS

Within the limits of this retrospective study, it can be concluded that: 1) The sinus augmentation procedures with thicker particle size grafts achieved higher success rate; and 2) over the time, 12.6% loss may occur in the height of grafted area.

A Pilot Investigation Generating an Alternative Therapeutic Strategy Combining Deproteinized Bovine Bone and Gelatin Sponge for a Novel Implant Material in Sinus Floor Elevation Operation

Background

Implant placement in the posterior maxilla is typically complicated by a shortage of bone. Gelatin sponge could be combined with an appropriate material to enhance mechanical strength and maintain stability of an implant. This study aimed to evaluate the clinical application of bone grafting with bovine bone mixed with gelatin sponge.

Material/Methods

Fifty-four patients were divided into a control group (deproteinized bovine bone, n=26) and a test group (deproteinized bovine bone combined with gelatin sponge, n=28). Implants were placed in patients simultaneously after surgery (operation). Cone-beam computed tomography examination was carried out immediately and 6 months after surgery. Space with grafting materials was measured with Mimics software (version 16.0).

Results

No remarkable differences were found for simultaneous placement, height of residual bone, delayed placement, width of residual bone, graft volume immediately after surgery (V₁), graft volume 6 months after surgery (V₂), or volumetric change rate between the test group and the control group (P>0.05). Graft volume V₂ was remarkably decreased compared with V₁ in the control and test groups (P=0.01). There were no significant differences for bone height immediately after surgery (H₁) and bone height at 6 months after surgery (H₂) between the 2 groups. Bone height H₂ was markedly decreased compared with H₁ (P<0.05). At 1 year after implantation, there was 1 implant loss in the control group and 2 in the test group. The implant survival rate in the control group was 97.62% and 95.24% in the test group.

Conclusions

Absorbable gelatin sponge combined with bovine bone particles was an effective and economical material for use in routine sinus floor elevation surgery.

A reduced healing protocol for sinus floor elevation in a staged approach with deproteinized bovine bone mineral alone: A randomized controlled clinical trial of a 5-month healing in comparison to the 8-month healing

PURPOSE

To investigate the feasibility of reducing the healing time of maxillary sinus floor elevation (MSFE) by a two-stage approach using deproteinized bovine bone mineral (DBBM) alone, based on clinical, histomorphometric, and microradiographic evaluations.

MATERIALS AND METHODS

Twenty consecutive cases with an atrophic posterior edentulous maxilla were randomly assigned to two groups at a ratio of 1:1. The lateral window approach to MSFE with DBBM alone was followed by an 8-month bone-healing period in the control group compared to 5 months in the test group. During implant placement, bone biopsies were harvested from implant osteotomy sites for micro-computed tomography (CT), histological, and histomorphometric evaluations. Cone beam CT (CBCT) scans were performed before and immediately after MSFE and after the bone-healing periods. The implant stability quotient (ISQ) was measured sequentially at implant placement and 1, 3, and 6 months thereafter.

RESULTS

The histomorphometric and microradiographic results showed no significant differences in new bone formation on the augmented sinus floor between the two groups (all Ps > .05), except that trabecular thickness was significantly reduced and trabecular separation significantly increased in the test group (both Ps < .05). The ISQs of both groups increased continuously after implant placement, but the difference was not significant between the groups at each time point. CBCT analyses showed that the extent of volumetric loss was comparable after bone healing for 5 and 8 months (P > .05).

CONCLUSIONS

Within the limitations of this study, the bone-healing time of MSFE with DBBM alone for staged implant placement could be reduced to 5 months instead of 8 or 9 months, based on the histomorphometric, microradiographic, and clinical outcomes; however, impact on long-term implant survival remains unknown and needs further investigation with long-term follow-ups.

Histologic, Histomorphometric, and Clinical Analysis of the Effects of Growth Factors in a Fibrin Network Used in Maxillary Sinus Augmentation

This randomized controlled clinical trial evaluated the effect of mineralized plasmatic matrix (MPM), comprised of synthetic graft and platelet concentrates, on new bone formation and volume stability over time in maxillary sinus lifting (MSL). Unilateral MSL was performed in 20 patients with either beta-tricalcium phosphate (β-TCP) or MPM grafts (10 sinuses each). Six months postsurgery, specimens were obtained with a trephine bur prior to implant placement in 39 cases. Volumetric changes in sinus augmentation were analyzed between 1 week (T-I) and 6 months (T-II) postsurgery. Histomorphometric and histological analyses of biopsy samples revealed mean new bone percentages of 35.40% ± 9.09% and 26.92% ± 7.26% and residual graft particle areas of 23.13% ± 6.16% and 32.25% ± 8.48% in the MPM and β-TCP groups, respectively (p < 0.05). The mean soft-tissue areas in the MPM and β-TCP groups were 41.48% ± 8.41% and 40.83% ± 8.86%, respectively (p > 0.05). Graft reductions between baseline and 6-months postprocedure in the β-TCP and MPM groups were 17.12% ± 13.55% and 14.41% ± 12.87%, respectively, with significant graft volume reduction observed in both groups (p < 0.05) while there is no significant difference between MPM and β-TCP groups (p > 0.05). Thus, MPM, representing growth factors in a fibrin network, increases new bone formation and has acceptable volume stability in MSL procedures

Automatic three-dimensional analysis of bone volume and quality change after maxillary sinus augmentation

INTRODUCTION

Maxillary sinus augmentation is a widely used surgical procedure to increase the bone volume before implant placement. In order to predict the stability of the implant, analysis of the change in bone volume and quality after a sinus graft procedure is necessary. The purpose of this study was to analyze the change in volume and quality of bone graft material after maxillary sinus augmentation using cone beam computed tomography (CBCT).

METHODS AND MATERIALS

Maxillary sinus lift procedures using bovine bone materials (Bio-Oss, Geistrich, Swiss) without immediate implantation were performed at the Pusan National University Dental Hospital in 22 patients, from 2014 to 2017. CBCT images were captured before surgery (T1), a day after surgery (T2), and after 4 to 7 months at follow-up (T3). The T2 and T3 images were registered to the T1 image using histogram matching and intensity-based registration. A total of 30 sinuses were analyzed three-dimensionally (3-D), using self-made software MATLAB 2018a (MathWorks, Natick, Massachusetts). The volume and structural indices of the bone graft material were measured and analyzed.

RESULTS

The average volume of graft material showed a decrease, while the average gray value showed an increase during the follow-up period, but these changes were not statistically significant. The structural indices of the graft material after histogram matching showed a significant difference in homogeneity, connectivity, thickness, and roughness at the postoperative follow-up.

CONCLUSIONS

The volume and gray value showed no statistically significant changes after the maxillary sinus lift procedures. The results of this study show that structural analysis using histogram matching can be used as a promising tool to analyze the quality of graft materials.

Void space and long-term volumetric changes of maxillary sinus floor augmentation with comparison between hydroxyapatite soaked with bone morphogenetic protein 2 and anorganic bovine xenograft alone

PURPOSE

We hypothesized that the void volume after maxillary sinus floor augmentation (MSFA) with recombinant human bone morphogenetic protein-2 (rhBMP-2) would be larger than that without rhBMP-2, and filled with bone in the long term. The aim of this study was to analyze the occurrence of void space and long-term volumetric changes after MSFA with rhBMP-2 and hydroxyapatite (BMP-2/H).

MATERIAL AND METHODS

In 25 subjects, MSFA was performed with BMP-2/H (group I) or an anorganic bovine xenograft (group II). Computed tomography scans were taken twice, at 3 months (T1) and at least 24 months (T2) after surgery. Total volume (TV), bone volume (BV), and void volume (VV) were measured and analysed statistically.

RESULTS

While similar amounts of graft material were used, the TV was significantly larger in group I than in group II (p = 0.014). The VV showed a tendency to be larger in group I than in group II. VV reduction up to T2 was significantly greater in group I than in group II. Consequently, the BV at T2 was significantly greater in group I than in group II by 36% (p = 0.014).

CONCLUSION

This study showed that our hypothesis was valid. rhBMP-2 is effective for long-term bone regeneration after MSFA.

Radiographic outcomes of transcrestal and lateral sinus floor elevation: One-year results of a bi-center, parallel-arm randomized trial

OBJECTIVES

To comparatively evaluate the radiographic outcomes of transcrestal and lateral sinus floor elevation (tSFE and lSFE, respectively) when applied concomitantly with implant placement.

MATERIALS AND METHODS

Patients with at least 1 edentulous site with residual bone height (RBH) of 3-6 mm were enrolled in a bi-center, parallel-arm, randomized trial. Both tSFE and lSFE were associated with a bovine-derived xenograft, and implants were inserted concomitantly. In lSFE group, the antrostomy was covered with a resorbable collagen membrane. Marginal bone loss and the maturation of the grafted area were evaluated on periapical radiographs at 6 and 12 months. Twelve-month CT/CBCT was used to assess the effect of grafting procedures circumferentially around the implant. A per-protocol analysis was performed.

RESULTS

The per-protocol study population consisted of 26 patients in the tSFE group and 28 patients in the lSFE group. At 12 months, the median proportion of the implant surface in contact with the peri-implant radiopaque area was 100% in both groups, with no significant inter-group difference. Suboptimal bone-to-implant contact was observed in 13% and 3.6% of tSFE and lSFE cases, respectively. In both groups, marginal bone loss was minimal (≤1 mm) and infrequent, and the radiographic aspect was suggestive of an advanced stage of maturation.

CONCLUSIONS

At sites with RBH of 3-6 mm where implants are placed concomitantly with sinus floor elevation, tSFE and lSFE are both highly predictable in obtaining an implant surface completely embedded in a radiopaque area at 12 months post-surgery. (ClinicalTrials.gov ID: NCT02415946).

Evaluation of three-dimensional contraction of the volume of grafts after staged augmentation of the sinus floor, and an analysis of influential factors

Our aim was to evaluate the volume by which grafts contract after augmentation of the sinuses by three-dimensional analysis on cone-beam computed tomographs (CT), and to investigate the factors that influence the outcomes. The sinus floor was augmented with deproteinised bovine bone mineral in 58 patients with 123 edentulous sites related to 67 sinuses. The outcomes of augmentation were analysed by both linear and volumetric measurements on cone-beam CT images taken immediately after operation and six months later. Mathematical models were established to investigate the influence of anatomical characteristics of the sinuses and patient-related factors on contraction of the volume of the grafts. The mean reduction in the height of the grafts on site-based analysis was 17.8% after six months, and the contraction in volume on sinus-based analysis was 22.7 %. Of the edentulous sites 20/123 (16%) could not have implants 10 mm long inserted at the second stage operation because of insufficient bony height. Linear regression indicated that the type of edentulism (single or multiple teeth lost) was significantly associated with contraction in the volume of the grafts (p=0.006). Mixed model regression showed that the reduction in the height of the grafts was significantly influenced by the width of the sinus floor and the angle between the lateral and the medial wall of sinus (p=0.001, p=0.000). The reduction in height of the grafts and contraction in volume on linear and volumetric measurements six months after augmentation were roughly 18% and 22%, respectively. A wide sinus, large lateromedial angle, and loss of multiple teeth under the same sinus strongly predict that large amount of grafts will resorb. The anatomy of the sinus and patients' characteristics should be taken into consideration before treatment.

Resorption behaviour of the articular surface dome and functional outcome after open reduction and internal fixation of mandibular condylar head fractures using small-fragment positional screws

PURPOSE

The aim of the study was to evaluate the resorption of the mandibular condylar head after open reduction and internal fixation of fractures with small-fragment screws and to evaluate the functional outcome.

PATIENTS AND METHOD

Forty-eight patients (55 condylar head fractures) underwent surgical treatment. All kinds of complications were recorded. In a subgroup of 20 patients, the average loss of bone height of the condylar head joint surface was gauged by measuring the vertical distances from 3 selected reference points of the fixation hardware to the vertex of the condyle in views of multiplanar radiographs after 6 months. Functional outcome was analysed by Helkimo index score.

RESULTS

Complication rates were low. Osteosynthesis loosening occurred in 4 cases. The mean bone resorption along the condylar head joint surface in the subgroup of 20 patients (with 23 joints) was 0.7 mm. Functional outcome was rated as follows: 8 patients - good, 11 patients - slightly impaired, 1 patient - moderately impaired.

CONCLUSION

Open reduction and internal fixation of condylar head fractures with small-fragment screws leads to reliable results in terms of joint surfaces relatively resistant to resorption and function. Low bone resorption on the joint surface of the condylar head can be expected.

Use of cone beam computed tomography in implant dentistry: current concepts, indications and limitations for clinical practice and research

Diagnostic radiology is an essential component of treatment planning in the field of implant dentistry. This narrative review will present current concepts for the use of cone beam computed tomography imaging, before and after implant placement, in daily clinical practice and research. Guidelines for the selection of three-dimensional imaging will be discussed, and limitations will be highlighted. Current concepts of radiation dose optimization, including novel imaging modalities using low-dose protocols, will be presented. For preoperative cross-sectional imaging, data are still not available which demonstrate that cone beam computed tomography results in fewer intraoperative complications such as nerve damage or bleeding incidents, or that implants inserted using preoperative cone beam computed tomography data sets for planning purposes will exhibit higher survival or success rates. The use of cone beam computed tomography following the insertion of dental implants should be restricted to specific postoperative complications, such as damage of neurovascular structures or postoperative infections in relation to the maxillary sinus. Regarding peri-implantitis, the diagnosis and severity of the disease should be evaluated primarily based on clinical parameters and on radiological findings based on periapical radiographs (two dimensional). The use of cone beam computed tomography scans in clinical research might not yield any evident beneficial effect for the patient included. As many of the cone beam computed tomography scans performed for research have no direct therapeutic consequence, dose optimization measures should be implemented by using appropriate exposure parameters and by reducing the field of view to the actual region of interest.

Three-Dimensional Assessment of Volumetric Changes in Sinuses Augmented with Two Different Bone Substitutes

Introduction. The bone volume of the posterior maxilla may not be appropriate for implant placement, due to factors such as pneumatized maxillary sinus. The purpose of this study was to evaluate the percentage of graft volume reduction following sinus floor elevation (SFE), with either slow resorbable bone substitute only or a composite of slow and fast resorbable bone substitutes, using cone beam computed tomography (CBCT). Materials and Methods. In this retrospective study, CBCT scans of SFE procedures were evaluated to determine the volume of grafted sinus with either deproteinized bovine bone (DBB) or a 2 : 1 mixture of biphasic calcium sulfate (CS) and DBB, as a composite. The volumetric changes of sinus augmentations were measured 2 weeks (V-I) and 6 months (V-II) after operation. Results. Thirty-three patients were included in this study. The average percentage volume reduction was 9.39 ± 3.01% and 17.65 ± 4.15% for DBB and composite grafts, respectively. A significant graft volume reduction was observed between V-I and V-II for both groups (p < 0.01). The DBB group exhibited significantly less volume reduction than the composite group (p < 0.01). Conclusions. Augmented sinus volume may change before implant placement. DBB offers greater volume stability during healing than composite grafts.

Accuracy of cone beam computed tomography in following simulated autogenous graft resorption in maxillary sinus augmentation procedure: an ex vivo study

OBJECTIVES:

Maxillary sinus augmentation is a well-documented procedure with long-term success in implant dentistry. Assessing graft volume changes over time is crucial, since resorption remains a major concern. CBCT is commonly employed to assess the quantity and quality of the available bone at the implant receptor site. However, its applicability in following graft volume changes is yet to be determined. The study aimed to assess CBCT accuracy in following simulated graft resorption ex vivo.

METHODS:

4 differently sized autogenous bone blocks harvested from the zygomatic buttress were bilaterally placed in the maxillary sinus of 12 human cadavers. The Accuitomo (J Morita, Kyoto, Japan) CBCT system was employed to scan each one of the 4 grafts in each of the 12 cadavers using identical settings. Gold standard graft measurements were obtained using micro-CT. One independent observer assessed the volume of each graft on CBCT images twice. Intraobserver reliability was assessed using Cohen's kappa and one-sample t-test was used to compare CBCT with micro-CT volumetric measurements.

RESULTS:

The mean micro-CT graft volumes were 97.12 ± 1.4, 197.32 ± 3.4, 361.41 ± 4.2 and 1040.11 ± 3.2 mm³ for Grafts 1-4, respectively, and the mean CBCT volumes of the corresponding grafts were 115.39 ± 7.01, 205.97 ± 9.91, 404.05 ± 16.81 and 1138.04 ± 20.98 mm³. CBCT measurements were statistically significantly different from micro-CT measurements (p = 0.001). Intraobserver reliability was good (r = 0.78).

CONCLUSIONS:

In every case, CBCT overestimated the maxillary graft volume in comparison with micro-CT. However, the measurement differences were limited and might not influence clinical performance.

Long-term radiographic assessment of maxillary sinus floor augmentation using beta-tricalcium phosphate: analysis by cone-beam computed tomography

Background

The long-term stability of maxillary sinus floor augmentation with β-TCP remains largely unknown. We report the long-term assessment of volumetric changes in maxillary sinus floor augmentation with β-TCP by cone-beam computed tomography (CBCT).

Methods

The subjects included 30 patients who underwent maxillary sinus floor augmentation using β-TCP and 58 implant placement for unilateral maxillary defect, simultaneously. Volumetric changes in β-TCP and the height of peri-implant bone were analyzed by CBCT.

Results

In all patients, the mean volume of the grafted bone decreased from immediately after implant placement to 6 months after implant placement (75.6 % reduction rate); it decreased further at 2.5 years after implant placement (54.9 % reduction rate). The mean of the height from the implant tip to the maxillary sinus floor was 2.00 ± 1.51 mm, 0.73 ± 1.33 mm, and −0.72 ± 1.11 mm immediately, 6 months, and 2.5 years after implant placement, respectively. The implant tip protruded beyond the maxillary sinus floor in approximately 70 % of the implants (41/58 implants) at 2.5 years after surgery. During the observation period, the implant survival rate was 100 %.

Conclusions

The radiographic analysis by CBCT is considerably more advanced than previous radiographic examinations. Although maxillary sinus pneumatization continues to progress ≥1 year after maxillary sinus floor augmentation with β-TCP, it stabilizes 3 years after surgery.

Late-term healing in an augmented sinus with different ratios of biphasic calcium phosphate: a pilot study using a rabbit sinus model

PURPOSE

The aim of this pilot study was to determine the osteoconductivity and dimensional stability of augmented sinuses using different ratios of biphasic calcium phosphate (BCP) in a rabbit sinus model.

METHODS

Each sinus of New Zealand white rabbits (2.5-3.5 kg) was assigned to one of two groups: BCP with a hydroxyapatite to β-tricalcium phosphate (HA:β-TCP) ratio of 70:30 (group TCP30) and BCP with an HA:β-TCP ratio of 30:70 (group TCP70). After preparing a window in the antral wall of a sinus, the Schneiderian membrane was elevated, and the applicable material was grafted. A fluorochrome calcein green was injected five days before euthanizing the animals at four months post-surgery. The specimens were analyzed histologically, histomorphometrically, and by using micro-computed tomography (micro-CT).

RESULTS

Micro-CT analysis revealed that the total augmented volume and the new bone volume did not differ significantly between the two groups whereas the resorption of materials was greater in the TCP70 group. The trabecular thickness, number, and separation also did not differ significantly between the two groups. Histomorphometrically, the areas of total augmentation, new bone, and residual material, as well as the ratio of new-bone-material contact did not differ significantly between the groups. Histologically, the residual particles were more scattered in the TCP70 group than in the TCP30 group. The fluorescence of the calcein green did not differ notably between the two groups.

CONCLUSIONS

The osteoconductivity and dimensional stability of the two BCPs with different ratios tested in this study were comparable after four months of healing. Therefore, we conclude that both BCPs show promise as a bone substitute for sinus augmentation.

Impact of human maxillary sinus volume on grafts dimensional changes used in maxillary sinus augmentation: a multislice tomographic study

PURPOSE

To assess the influence of complete maxillary sinus volume on the dimensional changes of different grafts used in maxillary sinus lift.

MATERIALS AND METHODS

Analysis of 50 surgical procedures of maxillary sinus lift performed on 43 subjects using different grafting materials: fresh frozen allogenic particulated bone (11), hydroxyapatite (Endobon(®)) (17), 60% hydroxyapatite + 40% beta-tricalcium phosphate (Bone Ceramic(®)) (12) and Bone Ceramic(®) + Emdogain(®) (10). One hundred and fifty multislice tomographic images of the maxillary sinus were obtained using the software Syngo CT 2011 A VOLUME, measuring complete maxillary sinus volume (T0) and dimensional changes of different graft materials during periods of 15 days (T1) and 180 days (T2). The factor studied was the influence of maxillary sinus volume on the dimensional changes of different graft materials used in maxillary sinus lift in patients with posterior edentulism. Data obtained were assessed using the Student's t-test and Pearson's correlation coefficient.

RESULTS

No correlation (r 0.112) between the total maxillary sinus volume and the dimensional changes of the different graft materials used in this study was observed (P > 0.05).

CONCLUSION

This study demonstrated that there is no sufficient evidence to support the thesis that the volume of the maxillary sinus influences the contraction of the grafts, at least on sample or the biomaterials evaluated in this cohort study.

Porous titanium granules in critical size defects of rabbit tibia with or without membranes

Recently, porous titanium granules (PTGs) have been indicated for the preservation of the dimensions of post-extraction sockets, as a filler in sinus lift procedures and for the treatment of peri-implant and periodontal defects, based on the osteoconductivity and dimensional stability of the titanium granules. However, there is a lack of information regarding the use of this material in larger defects and in conjunction with membranes. The objective of this study is to test the behavior of PTGs used to fill critical size defects in rabbit tibiae, with and without membranes. Critical defects were created in both tibiae of rabbits, divided randomly into three groups: Group A (defect filled with PTG), Group B (defect filled with PTG+collagen membrane) and a control group (empty defect). After six weeks, histomorphometric analysis was performed. The results showed more defect closures at the cortical area (87.37%±2.2%) and more bone formation at the marrow area (57.6%±1.3%) in Group B, in comparison with the other groups (P<0.05); the use of membranes improved the material stability expressed as more percentages of the original material when membranes were used (P<0.05). Finally, inflammatory reactions were observed when the granules were not protected by membranes. In spite of the limitations of this animal study, it may be concluded that PTG particles are osteoconductive and allow bone growth. The PTG particles must be covered by a membrane, especially when grafting larger defects, in order to control particle migration, promote clot stabilization and separate the PTG graft from undesired soft tissue cells.