Crystal structures of apo-DszC and FMN-bound DszC from Rhodococcus erythropolis D-1

Mechanistic Perspective on Oxygen Activation Chemistry by Flavoenzymes

Flavin-dependent enzymes catalyze a panoply of chemical transformations essential for living organisms. Through oxygen activation, flavoenzymes could generate diverse flavin-oxygen species that mediate numerous redox and non-redox transformations. In this review, we highlight the extensive oxygen activation chemistry at two sites of the flavin cofactor: C4a and N5 sites. Oxygen activation at the C4a site generates flavin-C4aOO(H) species for various monooxygenation reactions, while activation at the N5 site produces negatively charged flavin-N5OOH species, which act as highly reactive nucleophiles or bases. The selective oxygen activation at either the C4a or N5 site depends on the nature of substrates and is controlled by the active site architecture. These insights have expanded our understanding of oxygen activation chemistry in flavoenzymes and will serve as a foundation for future efforts in enzyme engineering and redesign.

Flavin-N5OOH Functions as both a Powerful Nucleophile and a Base in the Superfamily of Flavoenzymes

Flavoenzymes can mediate a large variety of oxidation reactions through the activation of oxygen. However, the O2 activation chemistry of flavin enzymes is not yet fully exploited. Normally, the O2 activation occurs at the C4a site of the flavin cofactor, yielding the flavin C4a-(hydro)hydroperoxyl species in monooxygenases or oxidases. Using extensive MD simulations, QM/MM calculations and QM calculations, our studies reveal the formation of the common nucleophilic species, Flavin-N5OOH, in two distinct flavoenzymes (RutA and EncM). Our studies show that Flavin-N5OOH acts as a powerful nucleophile that promotes C-N cleavage of uracil in RutA, and a powerful base in the deprotonation of substrates in EncM. We reason that Flavin-N5OOH can be a common reactive species in the superfamily of flavoenzymes, which accomplish generally selective general base catalysis and C-X (X=N, S, Cl, O) cleavage reactions that are otherwise challenging with solvated hydroxide ion base. These results expand our understanding of the chemistry and catalysis of flavoenzymes.

Formation and stabilization of C4a-hydroperoxy-FAD by the Arg/Asn pair in HadA monooxygenase

HadA monooxygenase catalyses the detoxification of halogenated phenols and nitrophenols via dehalogenation and denitration respectively. C4a-hydroperoxy-FAD is a key reactive intermediate wherein its formation, protonation and stabilization reflect enzyme efficiency. Herein, transient kinetics, site-directed mutagenesis and pH-dependent behaviours of HadA reaction were employed to identify key features stabilizing C4a-adducts in HadA. The formation of C4a-hydroperoxy-FAD is pH independent, whereas its decay and protonation of distal oxygen are associated with pK_a values of 8.5 and 8.4 respectively. These values are correlated with product formation within a pH range of 7.6-9.1, indicating the importance of adduct stabilization to enzymatic efficiency. We identified Arg101 as a key residue for reduced FAD (FADH^- ) binding and C4a-hydroperoxy-FAD formation due to the loss of these abilities as well as enzyme activity in HadA_R101A and HadA_R101Q . Mutations of the neighbouring Asn447 do not affect the rate of C4a-hydroperoxy-FAD formation; however, they impair FADH^- binding. The disruption of Arg101/Asn447 hydrogen bond networking in HadA_N447A increases the pK_a value of C4a-hydroperoxy-FAD decay to 9.5; however, this pK_a was not altered in HadA_N447D (pK_a of 8.5). Thus, Arg101/Asn447 pair should provide important interactions for FADH^- binding and maintain the pK_a associated with H₂ O₂ elimination from C4a-hydroperoxy-FAD in HadA. In the presence of substrate, the formation of C4a-hydroxy-FAD at the hydroxylation step is pH insensitive, and it dehydrates to form the oxidized FAD with pK_a of 7.9. This structural feature might help elucidate how the reactive intermediate was stabilized in other flavin-dependent monooxygenases.

Flavoprotein monooxygenases: Versatile biocatalysts

Flavoprotein monooxygenases (FPMOs) are single- or two-component enzymes that catalyze a diverse set of chemo-, regio- and enantioselective oxyfunctionalization reactions. In this review, we describe how FPMOs have evolved from model enzymes in mechanistic flavoprotein research to biotechnologically relevant catalysts that can be applied for the sustainable production of valuable chemicals. After a historical account of the development of the FPMO field, we explain the FPMO classification system, which is primarily based on protein structural properties and electron donor specificities. We then summarize the most appealing reactions catalyzed by each group with a focus on the different types of oxygenation chemistries. Wherever relevant, we report engineering strategies that have been used to improve the robustness and applicability of FPMOs.

Biochemical Characterization of the Two-Component Flavin-Dependent Monooxygenase Involved in Valanimycin Biosynthesis

The flavin reductase (FRED) and isobutylamine N-hydroxylase (IBAH) from Streptomyces viridifaciens constitute a two-component, flavin-dependent monooxygenase system that catalyzes the first step in valanimycin biosynthesis. FRED is an oxidoreductase that provides the reduced flavin to IBAH, which then catalyzes the hydroxylation of isobutylamine (IBA) to isobutylhydroxylamine (IBHA). In this work, we used several complementary methods to investigate FAD binding, steady-state and rapid reaction kinetics, and enzyme-enzyme interactions in the FRED:IBAH system. The affinity of FRED for FAD_ox is higher than its affinity for FAD_red, consistent with its function as a flavin reductase. Conversely, IBAH binds FAD_red more tightly than FAD_ox, consistent with its role as a monooxygenase. FRED exhibits a strong preference (28-fold) for NADPH over NADH as the electron source for FAD reduction. Isothermal titration calorimetry was used to study the association of FRED and IBAH. In the presence of FAD, either oxidized or reduced, FRED and IBAH associate with a dissociation constant of 7-8 μM. No interaction was observed in the absence of FAD. These results are consistent with the formation of a protein-protein complex for direct transfer of reduced flavin from the reductase to the monooxygenase in this two-component system.

Enhancing the substrate tolerance of DszC by a combination of alanine scanning and site-directed saturation mutagenesis

The biodesulfurization 4S pathway can specifically desulfurize an aromatic S heterocyclic compound (which is difficult to desulfurize by hydrodesulfurization) and maintain the integrity of its combustion value. The four Dsz enzymes in the pathway convert the model compound dibenzothiophene (DBT) into the sulfur-free compound 2-hydroxybiphenyl (HBP). DszC is the first enzyme in the 4S pathway and is subject to feedback inhibition and substrate inhibition. This study is the first attempt to further modify the DszC mutant AKWC to improve its tolerance to DBT. Alanine scanning was performed on the dimeric surface of the DszC mutant AKWC, and the HBP yield of the BAD (AKWCP413A) strain was increased compared to the BAD (AKWC) strain. Site-directed saturation mutagenesis was performed on the 413th amino acid of AKWC, and the substrate inhibition parameter K_I value of the mutant AKWCPI was 5.6 times higher than that of AKWC. When the DBT concentration was 0.25 mM, the HBP production of the recombinant strain overexpressing AKWCPI was increased by approximately 1.4-fold compared to the BL21(DE3)/BADC*+C* strain. The protein engineering of DszC further improved the substrate tolerance after overcoming the feedback inhibition, which provided a reference for the analysis of the inhibition mechanism of DszC substrate. Overexpression of DszC-beneficial mutants also greatly improved the efficiency of desulfurization.

Structure and function of the two-component flavin-dependent methanesulfinate monooxygenase within bacterial sulfur assimilation

Methyl sulfur compounds are a rich source of environmental sulfur for microorganisms, but their use requires redox systems. The bacterial sfn and msu operons contain two-component flavin-dependent monooxygenases for dimethylsulfone (DMSO₂) assimilation: SfnG converts DMSO₂ to methanesulfinate (MSI^-), and MsuD converts methanesulfonate (MS^-) to sulfite. However, the enzymatic oxidation of MSI^- to MS^- has not been demonstrated, and the function of the last enzyme of the msu operon (MsuC) is unresolved. We employed crystallographic and biochemical studies to identify the function of MsuC from Pseudomonas fluorescens. The crystal structure of MsuC adopts the acyl-CoA dehydrogenase fold with putative binding sites for flavin and MSI^-, and functional assays of MsuC in the presence of its oxidoreductase MsuE, FMN, and NADH confirm the enzymatic generation of MS^-. These studies reveal that MsuC converts MSI^- to MS^- in sulfite biosynthesis from DMSO₂.

Improved Efficiency of the Desulfurization of Oil Sulfur Compounds in Escherichia coli Using a Combination of Desensitization Engineering and DszC Overexpression

The 4S pathway of biodesulfurization, which can specifically desulfurize aromatic S-heterocyclic compounds without destroying their combustion value, is a low-cost and environmentally friendly technology that is complementary to hydrodesulfurization. The four Dsz enzymes convert the model compound dibenzothiophene (DBT) into the sulfur-free compound 2-hydroxybiphenyl (HBP). Of these four enzymes, DszC, the first enzyme in the 4S pathway, is the most severely affected by the feedback inhibition caused by HBP. This study is the first attempt to directly modify DszC to decrease its inhibition by HBP, with the results showing that the modified protein is insensitive to HBP. On the basis of the principle that the final HBP product could show a blue color with Gibbs reagent, a high-throughput screening method for its rapid detection was established. The screening method and the combinatorial mutagenesis generated the mutant AKWC (A101K/W327C) of DszC. After the IC₅₀ was calculated, the feedback inhibition of the AKWC mutant was observed to have been substantially reduced. Interestingly, the substrate inhibition of DszC had also been reduced as a result of directed evolution. Finally, the recombinant BL21(DE3)/BADC*+C* (C* represents AKWC) strain exhibited a specific conversion rate of 214.84 μmol_HBP/g_DCW/h, which was 13.8-fold greater than that of the wild-type strain. Desensitization engineering and the overexpression of the desensitized DszC protein resulted in the elimination of the feedback inhibition bottleneck in the 4S pathway, which is practical and effective progress toward the production of sulfur-free fuel oil. The results of this study demonstrate the utility of desensitization of feedback inhibition regulation in metabolic pathways by protein engineering.

Crystal structures of FMN-bound and FMN-free forms of dihydroorotate dehydrogenase from Trypanosoma brucei

Dihydroorotate dehydrogenase (DHODH) is a flavin‐binding enzyme essential for pyrimidine biosynthesis, which converts dihydroorotate to orotate. Three‐dimensional structures of cytosolic DHODH of parasitic protozoa are of interest in drug discovery for neglected tropical diseases, especially because these enzymes possess significantly different structural and functional properties from the membrane‐associated human enzyme. The existing crystal structures of the flavin mononucleotide (FMN)‐bound DHODHs reveal a number of interactions stabilizing FMN. However, to understand the binding mechanism correctly, it is necessary to compare the structures of the FMN‐bound and FMN‐free forms, because the protein moiety of the former is not necessarily the same as the latter. Here, we prepared the FMN‐free DHODH of Trypanosoma brucei using an Escherichia coli overexpression system. Although this apoform lacks enzymatic activity, simple incubation with FMN activated the enzyme. It was stable enough to be crystallized, enabling us to determine its structure by X‐ray crystallography at 1.6 Å resolution. We also determined the FMN‐bound form at 1.8 Å resolution. Although the two structures have essentially the same scaffold, we observed flipping of a peptide‐bond plane in the vicinity of the FMN‐binding site, accompanied by an alternative hydrogen‐bonding pattern. Comparisons of B factors of the protein main chain revealed that binding of FMN decreased flexibility of most of the residues at the FMN‐binding site, but increased flexibility of a lid‐like loop structure over the active center. This increase was ascribed to a conformational change in an FMN‐contacting residue, Asn195, which induced a rearrangement of a hydrogen‐bond network of the residues comprising the lid.

Structural and Biochemical Characterization of BdsA from Bacillus subtilis WU-S2B, a Key Enzyme in the "4S" Desulfurization Pathway

Dibenzothiophene (DBT) and their derivatives, accounting for the major part of the sulfur components in crude oil, make one of the most significant pollution sources. The DBT sulfone monooxygenase BdsA, one of the key enzymes in the “4S” desulfurization pathway, catalyzes the oxidation of DBT sulfone to 2′-hydroxybiphenyl 2-sulfonic acid (HBPSi). Here, we determined the crystal structure of BdsA from Bacillus subtilis WU-S2B, at the resolution of 2.2 Å, and the structure of the BdsA-FMN complex at 2.4 Å. BdsA and the BdsA-FMN complex exist as tetramers. DBT sulfone was placed into the active site by molecular docking. Seven residues (Phe12, His20, Phe56, Phe246, Val248, His316, and Val372) are found to be involved in the binding of DBT sulfone. The importance of these residues is supported by the study of the catalytic activity of the active site variants. Structural analysis and enzyme activity assay confirmed the importance of the right position and orientation of FMN and DBT sulfone, as well as the involvement of Ser139 as a nucleophile in catalysis. This work combined with our previous structure of DszC provides a systematic structural basis for the development of engineered desulfurization enzymes with higher efficiency and stability.

Crystal structures of TdsC, a dibenzothiophene monooxygenase from the thermophile Paenibacillus sp. A11-2, reveal potential for expanding its substrate selectivity

Sulfur compounds in fossil fuels are a major source of environmental pollution, and microbial desulfurization has emerged as a promising technology for removing sulfur under mild conditions. The enzyme TdsC from the thermophile Paenibacillus sp. A11-2 is a two-component flavin-dependent monooxygenase that catalyzes the oxygenation of dibenzothiophene (DBT) to its sulfoxide (DBTO) and sulfone (DBTO₂) during microbial desulfurization. The crystal structures of the apo and flavin mononucleotide (FMN)-bound forms of DszC, an ortholog of TdsC, were previously determined, although the structure of the ternary substrate-FMN-enzyme complex remains unknown. Herein, we report the crystal structures of the DBT-FMN-TdsC and DBTO-FMN-TdsC complexes. These ternary structures revealed many hydrophobic and hydrogen-bonding interactions with the substrate, and the position of the substrate could reasonably explain the two-step oxygenation of DBT by TdsC. We also determined the crystal structure of the indole-bound enzyme because TdsC, but not DszC, can also oxidize indole, and we observed that indole binding did not induce global conformational changes in TdsC with or without bound FMN. We also found that the two loop regions close to the FMN-binding site are disordered in apo-TdsC and become structured upon FMN binding. Alanine substitutions of Tyr-93 and His-388, which are located close to the substrate and FMN bound to TdsC, significantly decreased benzothiophene oxygenation activity, suggesting their involvement in supplying protons to the active site. Interestingly, these substitutions increased DBT oxygenation activity by TdsC, indicating that expanding the substrate-binding site can increase the oxygenation activity of TdsC on larger sulfur-containing substrates, a property that should prove useful for future microbial desulfurization applications.

Cryptic indole hydroxylation by a non-canonical terpenoid cyclase parallels bacterial xenobiotic detoxification

Terpenoid natural products comprise a wide range of molecular architectures that typically result from C–C bond formations catalysed by classical type I/II terpene cyclases. However, the molecular diversity of biologically active terpenoids is substantially increased by fully unrelated, non-canonical terpenoid cyclases. Their evolutionary origin has remained enigmatic. Here we report the in vitro reconstitution of an unusual flavin-dependent bacterial indoloterpenoid cyclase, XiaF, together with a designated flavoenzyme-reductase (XiaP) that mediates a key step in xiamycin biosynthesis. The crystal structure of XiaF with bound FADH₂ (at 2.4 Å resolution) and phylogenetic analyses reveal that XiaF is, surprisingly, most closely related to xenobiotic-degrading enzymes. Biotransformation assays show that XiaF is a designated indole hydroxylase that can be used for the production of indigo and indirubin. We unveil a cryptic hydroxylation step that sets the basis for terpenoid cyclization and suggest that the cyclase has evolved from xenobiotics detoxification enzymes.

The biosynthesis of xiamycin, an antimicrobial bacterial indolosesquiterpenoid, involves an unusual cyclization cascade. Here, the authors characterise the XiaF enzyme, which resembles xenobiont-degrading enzymes and is responsible for a hidden indole hydroxylation step that triggers the cyclization reaction.

Crystal structure of dibenzothiophene sulfone monooxygenase BdsA from Bacillus subtilis WU-S2B

The dibenzothiophene (DBT) sulfone monooxygenase BdsA from Bacillus subtilis WU-S2B catalyzes the conversion of DBT sulfone to 2'-hydroxybiphenyl 2-sulfinate. We report the crystal structures of BdsA at a resolution of 2.80 Å. BdsA exists as a homotetramer with a dimer-of-dimers configuration in the crystal, and the interaction between E288 and R296 in BdsA is important for tetramer formation. A structural comparison with homologous proteins shows that the orientation and location of the α9-α12 helices in BdsA are closer to those of the closed form than those of the open form in the EDTA monooxygenase EmoA. Proteins 2017; 85:1171-1177. © 2017 Wiley Periodicals, Inc.

Initial investigations of C4a-(hydro)peroxyflavin intermediate formation by dibenzothiophene monooxygenase

Dibenzothiophene monooxygenase is the initiating enzyme in the Rhodococcus 4S biodesulfurization pathway. A member of the Class D flavin monooxygenases, it uses FMN to activate molecular oxygen for oxygenation of the substrate, dibenzothiophene. Here, we have used stopped-flow spectrophotometry to show that DszC forms a peroxyflavin intermediate in the absence of substrate. Mutagenesis of Ser163 and His391 to Ala appears to decrease the binding affinity for reduced FMN and eliminates the enzyme's ability to stabilize the peroxyflavin intermediate.

Evaluation of the Conformational Stability of Recombinant Desulfurizing Enzymes from a Newly Isolated Rhodococcus sp

Metabolic pathways of aerobic bacteria able to assimilate sulfur can provide biocatalysts for biodesulfurization of petroleum and of other sulfur-containing pollutants. Of major interest is the so-called "4S pathway," in that C-S bonds are specifically cleaved leaving the carbon skeleton of substrates intact. This pathway is carried out by four enzymes, named Dsz A, B, C, and D. In view of a possible application of recombinant Dsz enzymes in biodesulfurization treatments, we have investigated the structural features of enzymes cloned from a Rhodococcus strain isolated from polluted environmental samples and their resistance to temperature (20-95 °C) and to organic solvents (5, 10, and 20 % v/v methanol, acetonitrile, hexane, and toluene). Changes in protein structures were assessed by circular dichroism and intrinsic fluorescence spectroscopy. We found that all Dsz proteins are unfolded by temperatures in the range 45-60 °C and by all solvents tested, with the most dramatic effect being produced by toluene. These results suggest that stabilization of the biocatalysts by protein engineering will be necessary for developing biodesulfurization technologies based on Dsz enzymes.