Biological and environmental exposure monitoring of volatile organic compounds among nail technicians in the Greater Boston area

Occupational Risks of Podologists: A Combined Assessment of VOCs, Vibration, Noise Levels and Health Complaints

Podologists are exposed to many occupational hazards, including volatile organic compounds (VOCs) from insole manufacturing and noise/vibration during nail or tissue grinding. In this study, VOCs, noise, and vibration were measured in five podiatry clinics and three offices. Questionnaires were administered to 23 podologists and 19 office workers to inquire about their pain, ocular, skin and respiratory complaints. The results showed that the podologists' exposure to the total VOC concentrations was approximately twice as high as that of the office workers. The podologists' complaints regarding pain were found to be correlated with ambient noise and hand-arm vibration levels. Ocular, skin, and respiratory complaints were also found to be correlated with total VOC concentrations. These results suggest that VOCs, noise and vibration in the working environment may impair podologists' health and that they have an intensifying effect on each other, increasing the severity of health issues.

Assessing occupational exposure of airborne PMs and TVOCs in the nail salons in Tehran city, Iran

There are concerns about the health of nail salon technicians due to the inherently harmful agents such as volatile organic compounds (VOCs) and released particles in the salons. For this reason, this study was conducted to investigate the occupational exposure of nail salon technicians to VOCs and particulate matters (PMs) in the nail salons in Tehran, Iran. In this cross-sectional study, indoor air quality and measurement continually Total VOCs and PMs in the various size of PM1-PM10 using PhoCheck Tiger and particle counter device investigated, respectively. site observation, and an interview with the manager in 49 salons in Tehran. Data was analyzed using SPSS software (version 22). Mean concentrations of PM1 with 2.56 μɡ/m3 was the lowest amount and PM10 with 346.86μɡ/m3 had the highest concentration. Also, the mean concentration of TVOCs was equal 2.61 ppm. The results of the regression model showed that there is a statistically significant between the number of services with airborne PMs (PM2.5), (p-Value≤0.050). In salons only with nail activities, the concentration of PM4 was less than the others, although this correlation was statistically significant just for PM1 (p-Value = 0.010). By implementing effective local exhaust ventilation systems equipped with dust collectors and utilizing safe products, the emission of particles and chemical compounds within salons can be significantly reduced.

Exposure assessment to BTEX in the air of nail salons in Tehran city, Iran

The nail salon industry has grown considerably, but there are serious concerns about the health risks associated with working in this field. Therefore, the purpose of this study was to investigate the exposure of nail technicians to BTEX. A cross-sectional study was conducted on 49 salons, and NIOSH Method 1501 was used to measure the concentration of BTEX in the breathing zone of technicians. The EPA method was used to assess health risks. Statistical analysis was conducted using SPSS software. The mean concentrations of toluene were (82.65 ± 198.84µg/m³)µg/m³, followed by benzene (10.58 ± 9.62µg/m³), p-xylenes (20.77 ± 37.79µg/m³), o-xylene (13.79 ± 25.70µg/m³), and ethylbenzene (29.35 ± 58.26µg/m³) , that lower than the permissible exposure limits suggested by NIOSH. Among the BTEX, toluene (82.65 ± 198.84µg/m³) has the most concentration in the nail salons. It was also discovered through multiple linear regression analysis that humidity had a significant effect on increasing the concentration of toluene (Beta = 0.50, P-value = 0.001) and ethylbenzene (Beta = 0.16, P = 0.049), while there was a considerable association between the number of services performed and benzene concentration (Beta = 0.34, P = 0.010). The average inhalation lifetime cancer risk for benzene (4.9 × 10 ^-5±4.5 × 10^-5) was higher than the recommended value set by the US EPA. Although the concentrations of BTEX were lower than the maximum permissible limits, the results of the cancer risk assessment for benzene showed that working in nail salons with poor ventilation is hazardous. Therefore, exposure can be minimized by ensuring appropriate ventilation in the workplace and using safe products.

Exposure of formal and informal nail technicians to organic solvents found in nail products

Nail technicians are exposed to volatile organic compounds (VOCs) emitted from nail products used in their daily work, which may cause adverse health effects. This study aimed to assess VOC exposure of nail technicians in the South African formal and informal sectors and to provide a task-based exposure assessment of different nail applications. Personal passive sampling was conducted on 10 formal and 10 informal nail technicians located in the northern suburbs of Johannesburg and the Braamfontein area, over 3 days. Real-time measurements were taken to determine task-based peak exposures. The number of clients serviced, working hours, type of nail application, type of ventilation, room volume, and carbon dioxide (CO₂) concentrations, were also recorded. There were differences in the nail products used, the types of nail applications performed, the number of clients serviced, and breathing zones VOC concentrations of the formal and informal nail technicians. Some formal nail salons were equipped with mechanical ventilation while the informal nail salons relied on natural ventilation. CO₂ concentrations were higher in the informal than the formal nail salons and increased during the course of the working day. Formal nail technicians were exposed to higher total volatile organic compounds (TVOC) concentrations than informal nail technicians, which may be due to the different nail application procedures as well as 'background' emissions from their co-workers-the bystander effect. Acetone was the predominantly detected VOC: the formal nail technicians were exposed to significantly higher TWA (8 h) concentrations [geometric mean (GM) 43.8 ppm, geometric standard deviation (GSD) 2.49] than were the informal nail technicians (GM 9.87 ppm, GSD 5.13). Methyl methacrylate among the informal nail technicians was measured at 89.7% detection frequency, far higher than that among the formal nail technicians (3.4%). This may be attributed to the observed popularity of acrylic nail applications in this sector. Nail applications involving soak-off gave rise to high TVOC peaks at the start of the nail application process. This is the first study to compare organic solvent exposures among formal and informal nail technicians and determine task-based peak exposures. It also brings attention to the often-overlooked informal sector of this industry.

Evaluating Indoor Air Phthalates and Volatile Organic Compounds in Nail Salons in the Greater New York City Area: A Pilot Study

The Greater New York City area ranks highest in the United States in the number of nail salon technicians, primarily Asian immigrant women. Nail salon technicians are exposed to toxic phthalates and volatile organic compounds daily in nail salons. The purpose of this pilot study was to measure a mixture of phthalates and volatile organic compounds in nail salons in the Greater New York City area, and to characterize work-related determinants of indoor air quality in these nail salons. Working with four Asian nail salon organizations in the Greater New York City area, we measured indoor air phthalates and volatile organic compounds at 20 nail salons from February to May 2021 using silicone wristbands and passive samplers, respectively. Nail salon characteristics were also examined. We measured six phthalates and 31 volatile organic compounds. Di(2-ethylhexyl) phthalate and Diethyl phthalate had the highest concentrations among the six phthalates measured. Concentrations of toluene, d-limonene, methyl methacrylate, and ethyl methacrylate were higher than that of the rest. Manicure/pedicure tables, the number of customers per day, and application of artificial nail (acrylic) services were positively associated with the levels of phthalates and volatile organic compounds. Given the large number of people employed in the nail industry and the even larger number of customers visiting such establishments, exposures to these toxic chemicals are likely to be widespread.

Validation of in vivo toenail measurements of manganese and mercury using a portable X-ray fluorescence device

BACKGROUND AND OBJECTIVE

Toenail metal concentrations can be used as an effective biomarker for exposure to environmental toxicants. Typically toenail clippings are measured ex vivo using inductively coupled plasma mass spectrometry (ICP-MS). X-ray fluorescence (XRF) toenail metal measurements done on intact toenails in vivo could be used as an alternative to alleviate some of the disadvantages of ICP-MS. In this study, we assessed the ability to use XRF to measure toenail metal concentrations in real-time without having to clip the toenails (i.e., in vivo) in two occupational settings for exposure assessment of manganese and mercury.

MATERIALS AND METHODS

The portable XRF method used a 3-min in vivo measurement of toenails prior to clipping and was assessed against ICP-MS measurement of toenail clippings taken immediately after the XRF measurement and work history for a group of welders (n = 16) assessed for manganese exposure and nail salon workers (n = 10) assessed for mercury exposure.

RESULTS AND CONCLUSIONS

We identified that in vivo XRF metal measurements were able to discern exposure to manganese in welders and mercury in nail salon workers. We identified significant positive correlations between ICP-MS of clippings and in vivo XRF measures of both toenail manganese (R = 0.59, p = 0.02) and mercury (R = 0.74, p < 0.001), as well as between in vivo XRF toenail manganese and work history among the welders (R = 0.55, p = 0.03). We identified in vivo XRF detection limits to be 0.5 µg/g for mercury and 2.6 µg/g for manganese. Further work should elucidate differences in the timing of exposure using the in vivo XRF method over toenail clippings and modification of measurement time and x-ray setting to further decrease the detection limit. In vivo portable, XRF measurements can be used to effectively measure toenail Mn and Hg in occupational participants in real-time during study visits and at a fraction of the cost.

Human Biomonitoring of Environmental and Occupational Exposures by GC-MS and Gas Sensor Systems: A Systematic Review

Environmental chemicals and contaminants coming from multiple external sources enter the human body, determining a potential risk for human health. Human biomonitoring (HBM), measuring the concentrations of biomarkers in human specimens, has become an emerging approach for assessing population-wide exposure to hazardous chemicals and health risk through large-scale studies in many countries. However, systematic mapping of HBM studies, including their characteristics, targeted hazardous pollutants, analytical techniques, and sample population (general population and occupationally exposed workers), has not been done so far. We conducted a systematic review of the literature related to airborne hazardous pollutants in biofluids to answer the following questions: Which main chemicals have been included in the literature, which bodily fluids have been used, and what are the main findings? Following PRISMA protocol, we summarized the publications published up to 4 February 2021 of studies based on two methods: gas-chromatography/mass spectrometry (GC/MS) and electronic noses (e-noses). We screened 2606 records and 117 publications were included in the analysis, the most based on GC/MS analysis. The selected HBM studies include measurements of biomarkers in different bodily fluids, such as blood, urine, breast milk, and human semen as well as exhaled air. The papers cover numerous airborne hazardous pollutants that we grouped in chemical classes; a lot of hazardous and noxious compounds, mainly persistent organic pollutants (POPs) and volatile organic compounds (VOCs), have been detected in biological fluids at alarming levels. The scenario that emerged from this survey demonstrates the importance of HBM in human exposure to hazardous pollutants and the need to use it as valid tool in health surveillance. This systematic review represents a starting point for researchers who focus on the world of pollutant biomonitoring in the human body and gives them important insights into how to improve the methods based on GC/MS. Moreover, it makes a first overview of the use of gas sensor array and e-noses in HBM studies.

Exposures in nail salons to trace elements in nail polish from impurities or pigment ingredients - A pilot study

Nail polishes have evolved considerably. Toxic elements, such as lead, have been found in nail polish, and it is unclear if new finishes using metallic effect pigments may be contributing to metals exposure in nail technicians. We characterized concentrations of trace elements in 40 nail polishes, 9 technicians' urine, and 20 technicians' toenail clippings from 8 nail salons in the Boston area in 2017. We also collected 24 salon surface wipes from 3 of the salons. Antimony was not disclosed as a nail polish ingredient, yet concentrations (<15 μg/g) were above existing cosmetics guidelines (0.5 μg/g) in five (13%) of the samples. Aluminum (<11,450 μg/g), barium (<11,250 μg/g), iron (<3,270 μg/g), and magnesium (<2375 μg/g) were disclosed as ingredients and were also found on salon surfaces where nail polish was stored or used. Heavy metal impurities in nail polish were not detected for cadmium. Lead and nickel were found at low concentrations (<0.40 μg/g lead, <0.67 μg/g nickel). Tin (p = 0.003) concentrations were higher in nail polish with finishes compared to without. Barium and strontium (both p = 0.0001) concentrations were higher for red nail polishes compared to all other colors. Of those elements in nail polish and salon surfaces, aluminum and iron were detected in toenails, manganese was detected in urine and toenails, and barium was detected in urine at comparable levels to the general population. Besides preventable antimony levels in nail polish, individual metals in nail polish did not appear to be from impurities but mainly from colorants (i.e., pigments) and not major contributors to nail technician exposure. It is unclear if low-level chronic metals mixtures in nail salons are of health concern.

Exposure of Nail Salon Workers to Phthalates, Di(2-ethylhexyl) Terephthalate, and Organophosphate Esters: A Pilot Study

Relatively little is known about the exposure of nail technicians to semivolatile organic compounds (SVOCs) in nail salons. We collected preshift and postshift urine samples and silicone wrist bands (SWBs) worn on lapels and wrists from 10 female nail technicians in the Boston area in 2016-17. We analyzed samples for phthalates, phthalate alternatives, and organophosphate esters (OPEs) or their metabolites. Postshift urine concentrations were generally higher than preshift concentrations for SVOC metabolites; the greatest change was for a metabolite of the phthalate alternative di(2-ethylhexyl) terephthalate (DEHTP): mono(2-ethyl-5-carboxypentyl) terephthalate (MECPTP) more than tripled from 11.7 to 36.6 μg/g creatinine. DEHTP biomarkers were higher in our study participants' postshift urine compared to 2015-2016 National Health and Nutrition Examination Survey females. Urinary MECPTP and another DEHTP metabolite were moderately correlated (r = 0.37-0.60) with DEHTP on the SWBs, suggesting occupation as a source of exposure. Our results suggest that nail technicians are occupationally exposed to certain phthalates, phthalate alternatives, and OPEs, with metabolites of DEHTP showing the largest increase across a work day. The detection of several of these SVOCs on SWBs suggests that they can be used as a tool for examining potential occupational exposures to SVOCs among nail salon workers.