Functional domains of bacteriophage Mu transposase: properties of C-terminal deletions

Positional information within the Mu transposase tetramer: catalytic contributions of individual monomers

The strand cleavage and strand transfer reactions of Mu DNA transposition require structural/catalytic contributions from separate polypeptide domains of individual transposase (MuA) monomers within the functional MuA tetramer. Based on catalytic complementation between two inactive MuA variants, we have derived certain rules by which the physical location of a MuA monomer within the transposition complex specifies its role in DNA breakage and transfer. During strand transfer, MuA monomers contributing domain II to the reaction occupy R1 (the subsite proximal to the strand-transferred nucleotide), while those contributing domain IIIalpha occupy R2. The positions of the monomers contributing these two domains appear to be reversed during DNA cleavage.

Interactions between the repressor and the early operator region of bacteriophage Mu

The repressor of bacteriophage Mu, c, binds to three operator sites, O1, O2, and O3, overlapping two divergent promoters, which regulate the lytic and lysogenic pathways. Its binding to this operator region generates several complexes, which were analyzed by DNase I protection experiments. We demonstrate that c first binds to two 11-base pair partially repeated sequences in O2 that could represent "core" binding sites for the repressor. This initial interaction serves as an organizer of a more complex nucleoprotein structure in which O2, O1, and O3 become successively occupied. The quaternary structure of the repressor was also investigated. Size exclusion chromatography and protein-protein crosslinking experiments with chemicals that possess linking arms of various lengths indicate that the repressor oligomerizes in solution. A model is proposed describing the successive interactions of c with the operator sites O2, O1, and O3 leading to the elaboration of a higher order structure in which the early lytic functions are repressed.

Disassembly of the Mu transposase tetramer by the ClpX chaperone

Mu transposition is promoted by an extremely stable complex containing a tetramer of the transposase (MuA) bound to the recombining DNA. Here we purify the Escherichia coli ClpX protein, a member of a family of multimeric ATPases present in prokaryotes and eukaryotes (the Clp family), on the basis of its ability to remove the transposase from the DNA after recombination. Previously, ClpX has been shown to function with the ClpP peptidase in protein turnover. However, neither ClpP nor any other protease is required for disassembly of the transposase. The released MuA is not modified extensively, degraded, or irreversibly denatured, and is able to perform another round of recombination in vitro. We conclude that ClpX catalyzes the ATP-dependent release of MuA by promoting a transient conformational change in the protein and, therefore, can be considered a molecular chaperone. ClpX is important at the transition between the recombination and DNA replication steps of transposition in vitro; this function probably corresponds to the essential contribution of ClpX for Mu growth. Deletion analysis reveals that the sequence at the carboxyl terminus of MuA is important for disassembly by ClpX and can target MuA for degradation by ClpXP in vitro. These data contribute to the emerging picture that members of the Clp family are chaperones specifically suited for disaggregating proteins and are able to function with or without a collaborating protease.

Structure of the bacteriophage Mu transposase core: a common structural motif for DNA transposition and retroviral integration

The crystal structure of the core domain of bacteriophage Mu transposase, MuA, has been determined at 2.4 A resolution. The first of two subdomains contains the active site and, despite very limited sequence homology, exhibits a striking similarity to the core domain of HIV-1 integrase, which carries out a similar set of biochemical reactions. It also exhibits more limited similarity to other nucleases, RNase H and RuvC. The second, a beta barrel, connects to the first subdomain through several contacts. Three independent determinations of the monomer structure from two crystal forms all show the active site held in a similar, apparently inactive configuration. The enzymatic activity of MuA is known to be activated by formation of a DNA-bound tetramer of the protein. We propose that the connections between the two subdomains may be involved in the cross-talk between the active site and the other domains of the transposase that controls the activity of the protein.

Step-arrest mutants of phage Mu transposase. Implications in DNA-protein assembly, Mu end cleavage, and strand transfer

We describe the isolation and characterization of Mu A variants arrested at specific steps of transposition. Mutations at 13 residues within the Mu A protein were analyzed for precise excision of Mu DNA in vivo. A subset of the defective variants (altered at Asp269, Asp294, Gly348, and Glu392) were tested in specific steps of transposition in vitro. It is possible that at least some residues of the Asp269-Asp294-Glu392 triad may have functional similarities to those of the conserved Asp-Asp-Glu motif found in several transposases and retroviral integrases. Mu A(D269V) is defective in high-order DNA-protein assembly, Mu end cleavage, and strand transfer. The assembly defect, but not the catalytic defect, can be overcome by precleavage of Mu ends. Mu A(E392A) can assemble the synaptic complex, but cannot cleave Mu ends. A mutation of Gly348 to aspartic acid within Mu A permits the uncoupling of cleavage and strand transfer activities. This mutant is completely defective in synaptic assembly and Mu end cleavage in presence of Mg2+. The assembly defect is alleviated by replacing Mg2+ with Ca2+. Some Mu end cleavage is observed with this mutant in the presence of Mn2+. When presented with precleaved Mu ends, Mu A(G348D) exhibits efficient strand transfer activity.

Bacterial transposases and retroviral integrases

Transposable genetic elements have adopted two major strategies for their displacement from one site to another within and between genomes. One involves passage through an RNA intermediate prior to synthesis of a DNA copy while the other is limited uniquely to DNA intermediates. For both types of element, recombination reactions involved in integration are carried out by element-specific enzymes. These are called transposases in the case of DNA elements and integrases in the case of the best-characterized RNA elements, the retroviruses and retrotransposons. In spite of major differences between these two transposition strategies, one step in the process, that of insertion, appears to be chemically identical. Current evidence suggests that the similarities in integration mechanism are reflected in amino acid sequence similarities between the integrases and many transposases. These similarities are particularly marked in a region which is thought to form part of the active site, namely the DDE motif. In the light of these relationships, we attempt here to compare mechanistic aspects of retroviral integration with transposition of DNA elements and to summarize current understanding of the functional organization of integrases and transposases.

Characterization of functionally important sites in the bacteriophage Mu transposase protein

The 663 amino acid Mu transposase protein is absolutely required for Mu DNA transposition. Mutant proteins were constructed in vitro in order to locate regions of transposase that may be important for the catalysis of DNA transposition. Deletions in the A gene, which encodes the transposase, yielded two stable mutant proteins that aid in defining the end-specific DNA-binding domain. Linker insertion mutagenesis at eight sites in the Mu A gene generated two proteins, FF6 and FF14 (resulting from two and four amino acid insertions, respectively, at position 408), which were thermolabile for DNA binding in vitro at 43 degrees C. However, transposition activity in vivo was severely reduced for all mutant proteins at 37 degrees C, except those with insertions at positions 328 and 624. In addition, site-specific mutagenesis was performed to alter tyrosine 414, which is situated in a region that displays amino acid homology to the active sites of a number of nicking/closing enzymes. Tyrosine 414 may reside within an important, yet non-essential, site of transposase, as an aspartate-substituted protein had a drastically reduced frequency of transposition, while the remaining mutants yielded reduced, but substantial, frequencies of microMu transposition in vivo.

Interaction of Fis protein with DNA: bending and specificity of binding

The Escherichia coli Fis protein is a dimeric DNA-binding protein whose specific binding sites share a weak consensus sequence. Use of the gel retardation technique indicates that binding of Fis on a linear DNA fragment leads to the formation of a ladder of defined retarded complexes, independently of the presence of a specific site. This non-specific binding of Fis is consistent with a model where equivalent low-affinity sites on a given fragment would be bound randomly and independently of each other by consecutive Fis dimers. Evidence is presented that non-specific binding of Fis can, however, induce an apparent site-specific conformational change in the DNA. This observation is discussed in terms of a model in which each Fis:DNA complex detected in gel retardation experiments actually represents a dynamic equilibrium of a fixed number of Fis dimers distributed on the fragment.

Division of labor among monomers within the Mu transposase tetramer

A single tetramer of Mu transposase (MuA) pairs the recombination sites, cleaves the donor DNA, and joins these ends to a target DNA by strand transfer. Analysis of C-terminal deletion derivatives of MuA reveals that a 30 amino acid region between residues 575 and 605 is critical for these three steps. Although inactive on its own, a deletion protein lacking this region assembles with the wild-type protein. These mixed tetramers carry out donor cleavage but do not promote strand transfer, even when the donor cleavage stage is bypassed. These data suggest that the active center of the transposase is composed of the C-terminus of four MuA monomers; one dimer carries out donor cleavage while all four monomers contribute to strand transfer.

Use of gel retardation to analyze protein-nucleic acid interactions

Protein-nucleic acid interactions are crucial in the regulation of many fundamental cellular processes. The nature of these interactions is susceptible to analysis by a variety of methods, but the combination of high analytical power and technical simplicity offered by the gel retardation (band shift) technique has made this perhaps the most widely used such method over the last decade. This procedure is based on the observation that the formation of protein-nucleic complexes generally reduces the electrophoretic mobility of the nucleic acid component in the gel matrix. This review attempts to give a simplified account of the physical basis of the behavior of protein-nucleic acid complexes in gels and an overview of many of the applications in which the technique has proved especially useful. The factors which contribute most to the resolution of the complex from the naked nucleic acid are the gel pore size, the relative mass of protein compared with nucleic acid, and changes in nucleic acid conformation (bending) induced by binding. The consequences of induced bending on the mobility of double-strand DNA fragments are similar to those arising from sequence-directed bends, and the latter can be used to help characterize the angle and direction of protein-induced bends. Whether a complex formed in solution is actually detected as a retarded band on a gel depends not only on resolution but also on complex stability within the gel. This is strongly influenced by the composition and, particularly, the ionic strength of the gel buffer. We discuss the applications of the technique to analyzing complex formation and stability, including characterizing cooperative binding, defining binding sites on nucleic acids, analyzing DNA conformation in complexes, assessing binding to supercoiled DNA, defining protein complexes by using cell extracts, and analyzing biological processes such as transcription and splicing.

Frameshift mutations in the bacteriophage Mu repressor gene can confer a trans-dominant virulent phenotype to the phage

Virulent mutations in the bacteriophage Mu repressor gene were isolated and characterized. Recombination and DNA sequence analysis have revealed that virulence is due to unusual frameshift mutations which change several C-terminal amino acids. The vir mutations are in the same repressor region as the sts amber mutations which, by eliminating several C-terminal amino acids, suppress thermosensitivity of repressor binding to the operators by its N-terminal domain (J. L. Vogel, N. P. Higgins, L. Desmet, V. Geuskens, and A. Toussaint, unpublished data). Vir repressors bind Mu operators very poorly. Thus the Mu repressor C terminus, either by itself or in conjunction with other phage or host proteins, tunes the DNA-binding properties at the repressor N terminus.

Simultaneous expression of a bacteriophage Mu transposase and repressor: a way of preventing killing due to mini-Mu replication

In vitro studies of bacteriophage Mu transposition have shown that the phage-encoded transposase and repressor bind the same sequences on the phage genome. We attempted to test that prediction in vivo and found that Mu repressor directly inhibits transposition. We also found that, in the absence of repressor, constitutive expression of Mu transposition functions pA and pB is lethal in Escherichia coli strains lysogenic for a mini-Mu and that this is the result of intensive replication of the mini-Mu. These findings have important consequences where such mini-Mus are used as genetic tools. We also tested whether in Erwinia chrysanthemi the effect of transposition functions on a resident mini-Mu was the same as in E. coli. We observed that expression of pA alone was lethal in E. chrysanthemi and that a large fraction of the survivors underwent precise excision of the mini-Mu.

Instability of bacteriophage Mu transposase and the role of host Hfl protein

The activity of the transposase of bacteriophage Mu is unstable, requiring the protein to be synthesized throughout the lytic cycle (Pato and Reich, 1982). Using Western blot analysis, we analysed the stability of the transposase protein during the lytic cycle and found that it, too, is unstable. The instability of the protein is observed both in the presence and the absence of Mu DNA replication, and is independent of other Mu-encoded proteins and the transposase binding sites at the Mu genome ends. Stability of the protein is enhanced in host strains mutated at the hfl locus; however, stability of the transposase activity is not enhanced in these strains, suggesting that functional inactivation of the protein is not simply a result of its proteolysis.

Characterization of amber mutations in bacteriophage Mu transposase: a functional analysis of the protein

We have characterized a series of amber mutations in the A gene of bacteriophage Mu encoding the phage transposase. We tested different activities of these mutant proteins either in a sup0 strain or in different sup bacteria. In conjunction with the results described in the accompanying paper by Bétermier et al. (1989) we find that the C-terminus of the protein is not absolutely essential for global transposase function, but is essential for phage growth. Specific binding to Mu ends is defined by a more central domain. Our results also reinforce the previous findings (Bétermier et al., 1987) that more than one protein may be specified by the A gene.