Methylthioadenosine phosphorylase from the archaeon Pyrococcus furiosus. Mechanism of the reaction and assignment of disulfide bonds

Life inside and out: making and breaking protein disulfide bonds in Chlamydia

Disulphide bonds are widely used among all domains of life to provide structural stability to proteins and to regulate enzyme activity. Chlamydia spp. are obligate intracellular bacteria that are especially dependent on the formation and degradation of protein disulphide bonds. Members of the genus Chlamydia have a unique biphasic developmental cycle alternating between two distinct cell types; the extracellular infectious elementary body (EB) and the intracellular replicating reticulate body. The proteins in the envelope of the EB are heavily cross-linked with disulphides and this is known to be critical for this infectious phase. In this review, we provide a comprehensive summary of what is known about the redox state of chlamydial envelope proteins throughout the developmental cycle. We focus especially on the factors responsible for degradation and formation of disulphide bonds in Chlamydia and how this system compares with redox regulation in other organisms. Focussing on the unique biology of Chlamydia enables us to provide important insights into how specialized suites of disulphide bond (Dsb) proteins cater for specific bacterial environments and lifecycles.

Engineering disulfide bonds in Selenomonas ruminantium β-xylosidase by experimental and computational methods

Homotetrameric β-xylosidase from Selenomonas ruminantium (SXA) is one of the most efficient enzymes known for the hydrolysis of cell wall hemicellulose. SXA shows a rapid rate of activity loss at temperatures above 50°C. In this study, we have introduced two inter-subunit disulfide bridges with one point mutation. Lys237 was chosen to be replaced with cysteine since it interacts with the same residue in the opposite subunit. While pH optimum, temperature profile and catalytic efficiency of the mutated variant were similar to the native enzyme, the mutated enzyme showed about 40% increase in thermal stability at 55°C. Our results showed that introduction of a single residue mutation in structure of SXA results in appearance of two disulfide bonds at dimer-dimer interface of the enzyme. Coarse-grained molecular dynamics (CG-MD) simulations also proved lower amounts of root mean square fluctuation (RMSF) for position 237 and potential energy for mutated SXA. Based these results, we suggest that choosing a correct residue for mutation in multi subunit proteins results in multiple site conversions which equals to several simultaneous mutations. Furthermore, CG-MD simulation in agreement with experimental methods showed higher thermostability of mutated SXA which proved applicability of this simulation for thermostability analysis.

The survival mechanisms of thermophiles at high temperatures: an angle of omics

Thermophiles are referred to as microorganisms with optimal growth temperatures of >60 °C. Over the past few years, a number of studies have been conducted regarding thermophiles, especially using the omics strategies. This review provides a systematic view of the survival physiology of thermophiles from an "omics" perspective, which suggests that the adaptive ability of thermophiles is based on a cooperative mode with multi-dimensional regulations integrating genomics, transcriptomics, and proteomics.

Role of disulfide bonds in conformational stability and folding of 5'-deoxy-5'-methylthioadenosine phosphorylase II from the hyperthermophilic archaeon Sulfolobus solfataricus

Sulfolobus solfataricus 5'-deoxy-5'-melthylthioadenosine phosphorylase II (SsMTAPII), is a hyperthermophilic hexameric protein with two intrasubunit disulfide bonds (C138-C205 and C200-C262) and a CXC motif (C259-C261). To get information on the role played by these covalent links in stability and folding, the conformational stability of SsMTAPII and C262S and C259S/C261S mutants was studied by thermal and guanidinium chloride (GdmCl)-induced unfolding and analyzed by fluorescence spectroscopy, circular dichroism, and SDS-PAGE. No thermal unfolding transition of SsMTAPII can be obtained under nonreducing conditions, while in the presence of the reducing agent Tris-(2-carboxyethyl) phosphine (TCEP), a Tm of 100°C can be measured demonstrating the involvement of disulfide bridges in enzyme thermostability. Different from the wild-type, C262S and C259S/C261S show complete thermal denaturation curves with sigmoidal transitions centered at 102°C and 99°C respectively. Under reducing conditions these values decrease by 4°C and 8°C respectively, highlighting the important role exerted by the CXC disulfide on enzyme thermostability. The contribution of disulfide bonds to the conformational stability of SsMTAPII was further assessed by GdmCl-induced unfolding experiments carried out under reducing and nonreducing conditions. Thermal unfolding was found to be reversible if the protein was heated in the presence of TCEP up to 90°C but irreversible above this temperature because of aggregation. In analogy, only chemical unfolding carried out in the presence of reducing agents resulted in a reversible process suggesting that disulfide bonds play a role in enzyme denaturation. Thermal and chemical unfolding of SsMTAPII occur with dissociation of the native hexameric state into denatured monomers, as indicated by SDS-PAGE.

Widespread disulfide bonding in proteins from thermophilic archaea

Disulfide bonds are generally not used to stabilize proteins in the cytosolic compartments of bacteria or eukaryotic cells, owing to the chemically reducing nature of those environments. In contrast, certain thermophilic archaea use disulfide bonding as a major mechanism for protein stabilization. Here, we provide a current survey of completely sequenced genomes, applying computational methods to estimate the use of disulfide bonding across the Archaea. Microbes belonging to the Crenarchaeal branch, which are essentially all hyperthermophilic, are universally rich in disulfide bonding while lesser degrees of disulfide bonding are found among the thermophilic Euryarchaea, excluding those that are methanogenic. The results help clarify which parts of the archaeal lineage are likely to yield more examples and additional specific data on protein disulfide bonding, as increasing genomic sequencing efforts are brought to bear.

Purine nucleoside phosphorylases from hyperthermophilic Archaea require a CXC motif for stability and folding

5'-Deoxy-5'-methylthioadenosine phosphorylase II from Sulfolobus solfataricus (SsMTAPII) and purine nucleoside phosphorylase from Pyrococcus furiosus (PfPNP) are hyperthermophilic purine nucleoside phosphorylases stabilized by intrasubunit disulfide bonds. In their C-terminus, both enzymes harbour a CXC motif analogous to the CXXC motif present at the active site of eukaryotic protein disulfide isomerase. By monitoring the refolding of SsMTAPII, PfPNP and their mutants lacking the C-terminal cysteine pair after guanidine-induced unfolding, we demonstrated that the CXC motif is required for the folding of these enzymes. Moreover, two synthesized CXC-containing peptides with the same amino acid sequences present in the C-terminal regions of SsMTAPII and PfPNP were found to act as in vitro catalysts of oxidative folding. These small peptides are involved in the folding of partially refolded SsMTAPII, PfPNP and their CXC-lacking mutants, with a concomitant recovery of their catalytic activity, thus indicating that the CXC motif is necessary to obtain complete reversibility from the unfolded state of the two proteins. The two CXC-containing peptides are also able to reactivate scrambled RNaseA. The data obtained in the present study represent the first example of how the CXC motif improves both stability and folding in hyperthermophilic proteins with disulfide bonds.

Structures and functional implications of an AMP-binding cystathionine beta-synthase domain protein from a hyperthermophilic archaeon

Cystathionine beta-synthase domains are found in a myriad of proteins from organisms across the tree of life and have been hypothesized to function as regulatory modules that sense the energy charge of cells. Here we characterize the structure and stability of PAE2072, a dimeric tandem cystathionine beta-synthase domain protein from the hyperthermophilic crenarchaeon Pyrobaculum aerophilum. Crystal structures of the protein in unliganded and AMP-bound forms, determined at resolutions of 2.10 and 2.35 A, respectively, reveal remarkable conservation of key functional features seen in the gamma subunit of the eukaryotic AMP-activated protein kinase. The structures also confirm the presence of a suspected intermolecular disulfide bond between the two subunits that is shown to stabilize the protein. Our AMP-bound structure represents a first step in investigating the function of a large class of uncharacterized prokaryotic proteins. In addition, this work extends previous studies that have suggested that, in certain thermophilic microbes, disulfide bonds play a key role in stabilizing intracellular proteins and protein-protein complexes.

Effect of a disulfide bond on mevalonate kinase

Mevalonate kinase is one of ATP-dependent enzymes in the mevalonate pathway and catalyzes the phosphorylation of mevalonate to form mevalonate 5-phosphate. In animal cells, it plays a key role in regulating biosynthesis of cholesterol, while in microorganisms and plants, it is involved in the biosynthesis of isoprenoid derivatives that are one of the largest groups of natural products. Crystal structure and sequence alignment show that a unique disulfide bond exists in mevalonate kinase of thermostable species Methanococcus jannaschii, but not in rat mevalonate kinase. In the present study, we investigated the effect of the disulfide bond in M. jannaschii mevalonate kinase and an engineered disulfide bond in rat mevalonate kinase mutant A141C on the properties of enzymes through characterization of their wild-type and variant enzymes. Our result suggests that the Cys107-Cys281 disulfide bond is important for maintaining the conformation and the thermal activity of M. jannaschii mevalonate kinase. Other interactions could also have contributions. The thiol-titration and fluorescence experiment further indicate that rat mevalonate kinase A141C variant enzyme has a new disulfide bond, which makes the variant protein enhance its thermal activity and resist to urea denaturation.

A winged-helix protein from Sulfolobus turreted icosahedral virus points toward stabilizing disulfide bonds in the intracellular proteins of a hyperthermophilic virus

Sulfolobus turreted icosahedral virus (STIV) was the first non-tailed icosahedral virus to be isolated from an archaeal host. Like other archaeal viruses, its 37 open reading frames generally lack sequence similarity to genes with known function. The roles of the gene products in this and other archaeal viruses are thus largely unknown. However, a protein's three-dimensional structure may provide functional and evolutionary insight in cases of minimal sequence similarity. In this vein, the structure of STIV F93 reveals a homodimer with strong similarity to the winged-helix family of DNA-binding proteins. Importantly, an interchain disulfide bond is found at the dimer interface, prompting analysis of the cysteine distribution in the putative intracellular proteins of the viral proteome. The analysis suggests that intracellular disulfide bonds are common in cellular STIV proteins, where they enhance the thermostability of the viral proteome.

Biochemical and structural characterization of mammalian-like purine nucleoside phosphorylase from the Archaeon Pyrococcus furiosus

We report here the characterization of the first mammalian-like purine nucleoside phosphorylase from the hyperthermophilic archaeon Pyrococcus furiosus (PfPNP). The gene PF0853 encoding PfPNP was cloned and expressed in Escherichia coli and the recombinant protein was purified to homogeneity. PfPNP is a homohexamer of 180 kDa which shows a much higher similarity with 5'-deoxy-5'-methylthioadenosine phosphorylase (MTAP) than with purine nucleoside phosphorylase (PNP) family members. Like human PNP, PfPNP shows an absolute specificity for inosine and guanosine. PfPNP shares 50% identity with MTAP from P. furiosus (PfMTAP). The alignment of the protein sequences of PfPNP and PfMTAP indicates that only four residue changes are able to switch the specificity of PfPNP from a 6-oxo to a 6-amino purine nucleoside phosphorylase still maintaining the same overall active site organization. PfPNP is highly thermophilic with an optimum temperature of 120 degrees C and is characterized by extreme thermodynamic stability (T(m), 110 degrees C that increases to 120 degrees C in the presence of 100 mm phosphate), kinetic stability (100% residual activity after 4 h incubation at 100 degrees C), and remarkable SDS-resistance. Limited proteolysis indicated that the only proteolytic cleavage site is localized in the C-terminal region and that the C-terminal peptide is not necessary for the integrity of the active site. By integrating biochemical methodologies with mass spectrometry we assigned three pairs of intrasubunit disulfide bridges that play a role in the stability of the enzyme against thermal inactivation. The characterization of the thermal properties of the C254S/C256S mutant suggests that the CXC motif in the C-terminal region may also account for the extreme enzyme thermostability.

S-adenosylmethionine and its products

S-adenosylmethionine is involved in many processes, mainly methylation, polyamine synthesis and radical-based catalysis. It is synthesised through the catalysis of differently regulated enzyme forms. When it is used, the compounds formed are reutilized in different ways: in case of methylation, its end product is homocysteine, which can be remethylated to methionine, give rise to cysteine in the so-called transsulphuration pathway, or be released; in the case of polyamine synthesis, the methylthioadenosine formed is cleaved and gives rise to compounds which can be reutilized; during radical-based catalysis, 5-deoxyadenosine is formed and this, too, is cleaved and reutilized.

Dihydrodipicolinate synthase from Thermotoga maritima

DHDPS (dihydrodipicolinate synthase) catalyses the branch point in lysine biosynthesis in bacteria and plants and is feedback inhibited by lysine. DHDPS from the thermophilic bacterium Thermotoga maritima shows a high level of heat and chemical stability. When incubated at 90 degrees C or in 8 M urea, the enzyme showed little or no loss of activity, unlike the Escherichia coli enzyme. The active site is very similar to that of the E. coli enzyme, and at mesophilic temperatures the two enzymes have similar kinetic constants. Like other forms of the enzyme, T. maritima DHDPS is a tetramer in solution, with a sedimentation coefficient of 7.2 S and molar mass of 133 kDa. However, the residues involved in the interface between different subunits in the tetramer differ from those of E. coli and include two cysteine residues poised to form a disulfide bond. Thus the increased heat and chemical stability of the T. maritima DHDPS enzyme is, at least in part, explained by an increased number of inter-subunit contacts. Unlike the plant or E. coli enzyme, the thermophilic DHDPS enzyme is not inhibited by (S)-lysine, suggesting that feedback control of the lysine biosynthetic pathway evolved later in the bacterial lineage.

Pentose phosphates in nucleoside interconversion and catabolism

Ribose phosphates are either synthesized through the oxidative branch of the pentose phosphate pathway, or are supplied by nucleoside phosphorylases. The two main pentose phosphates, ribose-5-phosphate and ribose-1-phosphate, are readily interconverted by the action of phosphopentomutase. Ribose-5-phosphate is the direct precursor of 5-phosphoribosyl-1-pyrophosphate, for both de novo and 'salvage' synthesis of nucleotides. Phosphorolysis of deoxyribonucleosides is the main source of deoxyribose phosphates, which are interconvertible, through the action of phosphopentomutase. The pentose moiety of all nucleosides can serve as a carbon and energy source. During the past decade, extensive advances have been made in elucidating the pathways by which the pentose phosphates, arising from nucleoside phosphorolysis, are either recycled, without opening of their furanosidic ring, or catabolized as a carbon and energy source. We review herein the experimental knowledge on the molecular mechanisms by which (a) ribose-1-phosphate, produced by purine nucleoside phosphorylase acting catabolically, is either anabolized for pyrimidine salvage and 5-fluorouracil activation, with uridine phosphorylase acting anabolically, or recycled for nucleoside and base interconversion; (b) the nucleosides can be regarded, both in bacteria and in eukaryotic cells, as carriers of sugars, that are made available though the action of nucleoside phosphorylases. In bacteria, catabolism of nucleosides, when suitable carbon and energy sources are not available, is accomplished by a battery of nucleoside transporters and of inducible catabolic enzymes for purine and pyrimidine nucleosides and for pentose phosphates. In eukaryotic cells, the modulation of pentose phosphate production by nucleoside catabolism seems to be affected by developmental and physiological factors on enzyme levels.

The Crystal Structure of 5′-Deoxy-5′-methylthioadenosine Phosphorylase II from Sulfolobus solfataricus, a Thermophilic Enzyme Stabilized by Intramolecular Disulfide Bonds

The crystal structure of Sulfolobus solfataricus 5'-deoxy-5'-methylthioadenosine phosphorylase II (SsMTAPII) in complex with 5'-deoxy-5'-methylthioadenosine (MTA) and sulfate was determined to 1.45A resolution. The hexameric structure of SsMTAPII is a dimer-of-trimers with one active site per monomer. The oligomeric assembly of the trimer and the monomer topology of SsMTAPII are almost identical with trimeric human 5'-deoxy-5'-methylthioadenosine phosphorylase (hMTAP). SsMTAPII is the first reported hexameric member in the trimeric class of purine nucleoside phosphorylase (PNP) from Archaea. Unlike hMTAP, which is highly specific for MTA, SsMTAPII also accepts adenosine as a substrate. The residues at the active sites of SsMTAPII and hMTAP are almost identical. The broad substrate specificity of SsMTAPII may be due to the flexibility of the C-terminal loop. SsMTAPII is extremely thermoactive and thermostable. The three-dimensional structure of SsMTAPII suggests that the unique dimer-of-trimers quaternary structure, a CXC motif at the C terminus, and two pairs of intrasubunit disulfide bridges may play an important role in its thermal stability.

The genomics of disulfide bonding and protein stabilization in thermophiles

Thermophilic organisms flourish in varied high-temperature environmental niches that are deadly to other organisms. Recently, genomic evidence has implicated a critical role for disulfide bonds in the structural stabilization of intracellular proteins from certain of these organisms, contrary to the conventional view that structural disulfide bonds are exclusively extracellular. Here both computational and structural data are presented to explore the occurrence of disulfide bonds as a protein-stabilization method across many thermophilic prokaryotes. Based on computational studies, disulfide-bond richness is found to be widespread, with thermophiles containing the highest levels. Interestingly, only a distinct subset of thermophiles exhibit this property. A computational search for proteins matching this target phylogenetic profile singles out a specific protein, known as protein disulfide oxidoreductase, as a potential key player in thermophilic intracellular disulfide-bond formation. Finally, biochemical support in the form of a new crystal structure of a thermophilic protein with three disulfide bonds is presented together with a survey of known structures from the literature. Together, the results provide insight into biochemical specialization and the diversity of methods employed by organisms to stabilize their proteins in exotic environments. The findings also motivate continued efforts to sequence genomes from divergent organisms.

Certain thermophiles are found to stabilize their proteins in extreme environments with additional disulfide bonds. A phylogenetic profile identifies a protein disulfide oxidoreductase critical to the stabilization process.

A novel hyperthermostable 5′-deoxy-5′-methylthioadenosine phosphorylase from the archaeon Sulfolobus solfataricus

We report herein the first molecular characterization of 5'-deoxy-5'-methylthio-adenosine phosphorylase II from Sulfolobus solfataricus (SsMTAPII). The isolated gene of SsMTAPII was overexpressed in Escherichia coli BL21. Purified recombinant SsMTAPII is a homohexamer of 180 kDa with an extremely low Km (0.7 microm) for 5'-deoxy-5'-methylthioadenosine. The enzyme is highly thermophilic with an optimum temperature of 120 degrees C and extremely thermostable with an apparent Tm of 112 degrees C that increases in the presence of substrates. The enzyme is characterized by high kinetic stability and remarkable SDS resistance and is also resistant to guanidinium chloride-induced unfolding with a transition midpoint of 3.3 m after 22-h incubation. Limited proteolysis experiments indicated that the only one proteolytic cleavage site is localized in the C-terminal region and that the C-terminal peptide is necessary for the integrity of the active site. Moreover, the binding of 5'-deoxy-5'-methylthioadenosine induces a conformational transition that protected the enzyme against protease inactivation. By site-directed mutagenesis we demonstrated that Cys259, Cys261 and Cys262 play an important role in the enzyme stability since the mutants C259S/C261S and C262S show thermophilicity and thermostability features significantly lower than those of the wild-type enzyme. In order to get insight into the physiological role of SsMTAPII a comparative kinetic analysis with the homologous 5'-deoxy-5'-methylthioadenosine phosphorylase from Sulfolobus solfataricus (SsMTAP) was carried out. Finally, the alignment of the protein sequence of SsMTAPII with those of SsMTAP and human 5'-deoxy-5'-methylthioadenosine phosphorylase (hMTAP) shows several key residue changes that may account why SsMTAPII, unlike hMTAP, is able to recognize adenosine as substrate.