BIOLOGICAL FUNCTIONS OF COLLAGEN

Evolutionary Design of Self-Templated Supramolecular Fibrils Using M13 Bacteriophage for Tissue Engineering

Biomaterials in nature form hierarchical structures and functions across various length scales through binding and assembly processes. Inspired by nature, we developed hierarchically organized tissue engineering materials through evolutionary screening and self-templating assembly. Leveraging the M13 bacteriophage (phage), we employed an evolutionary selection process against hydroxyapatite (HA) to isolate HA-binding phage (HAPh). The newly discovered phage exhibits a bimodal length, comprising 950 nm and 240 nm, where the synergistic effect of these dual lengths promotes the formation of supramolecular fibrils with periodic banded structures. The assembled HAPh fibrils show the capability of HA mineralization and the directional growth of osteoblast cells. When applied to a dentin surface, it induces the regeneration of dentin-like tissue structures, showcasing its potential applications as a scaffold in tissue engineering. The integration of evolutionary screening and self-templating assembly holds promise for the future development of hierarchically organized tissue engineering materials.

Partially Lacerated Digital Flexor Tendons: A Cadaveric Study Determining the Intact Cross-sectional Area and Biomechanical Analysis

BACKGROUND

The extent of injury in partially lacerated tendons has conventionally been expressed as a percentage of the total tendon, to justify surgical repair. We propose a more objective method to estimate the cross-sectional area of the remnant intact tendon and to determine if the remaining tendon fibers can withstand the tensile forces of early active mobilization against resistance.

METHODS

The study was done on 20 cadaveric specimens, which were randomly assigned to receive a laceration of 25%, 50%, or 75% of the measured transverse tendon diameter. The circumference of the remaining intact portion of the partially lacerated tendon was measured and converted using a formula to determine the derived cross-sectional area (D-CSA). These D-CSA values were then validated by comparing them to digitally measured cross-sectional areas using a computer software program (computer-measured cross-sectional area, C-CSA). In addition, the ultimate tensile strength (UTS) of these partially lacerated tendons was analyzed to determine if a threshold exists beyond which surgical repair of a partially lacerated tendon is indicated.

RESULTS

We found that the D-CSAs matched moderately with C-CSAs, with 0.622 of Pearson correlation coefficient. The UTSs of tendons with CSAs above 8 mm in circumference were consistently above 150 N.

CONCLUSION

Measurement of the circumference of the partially lacerated tendon to obtain the D-CSA could be an accurate and practical method to benchmark residual tendon strength in the management of partially lacerated tendons.

Collagen constitutes about 12% in females and 17% in males of the total protein in mice

Collagen has been postulated to be the most abundant protein in our body, making up one-third of the total protein content in mammals. However, a direct assessment of the total collagen levels of an entire mammal to confirm this estimate is missing. Here we measured hydroxyproline levels as a proxy for collagen content together with total protein levels of entire mice or of individual tissues. Collagen content normalized to the total protein is approximately 0.1% in the brain and liver, 1% in the heart and kidney, 4% in the muscle and lung, 6% in the colon, 20-40% in the skin, 25-35% in bones, and 40-50% in tendons of wild-type (CD1 and CB57BL/6) mice, consistent with previous reports. To our surprise, we find that collagen is approximately 12% in females and 17% in males of the total protein content of entire wild-type (CD1 and CB57BL/6) mice. Although collagen type I is the most abundant collagen, the most abundant proteins are albumin, hemoglobulin, histones, actin, serpina, and then collagen type I. Analyzing amino acid compositions of mice revealed glycine as the most abundant amino acid. Thus, we provide reference points for collagen, matrisome, protein, and amino acid composition of healthy wild-type mice.

Antibacterial Collagen-Based Nanocomposite Dressings for Promoting Infected Wound Healing

Pathogenic bacterial infection is the most frequent wound complication, which has become a major clinical and healthcare challenge in wound management worldwide, leading to impaired healing processes, the risk of amputation, and even death. Here, collagen-based nanocomposite dressings (APZC) with broad-spectrum antibacterial activity are developed to promote the infected full-thickness wound healing. Short rod-like shaped ZnO NPs are synthesized and then coated with polydopamine (PDA) to obtain PDA coated ZnO NPs (PDA@ZnO NPs). Afterward, PDA@ZnO NPs are conjugated on the backbone of a collagen chain, and the obtained collagen-PDA@ZnO NPs conjugate is crosslinked by dialdehyde sodium alginate to fabricate APZC dressings. PDA@ZnO NPs show well dispersibility and are uniformly incorporated into the collagen matrix. APZC dressings have interconnected microporous structure and great physicochemical properties, besides good blood coagulation performance and well cytocompatibility. APZC dressings demonstrate long-lasting and excellently broad-spectrum antimicrobial activity, which can relieve the inflammatory reaction by killing pathogenic bacteria and induce the generation of blood vessels and the orderly deposition of collagen in the wound site, thus promoting infected full-thickness wound healing without obvious scar formation. Overall, the functionalized collagen-based nanocomposite dressings have great potential in the clinical treatment against bacteria-associated wound infection.

Consumer Acceptance and Production of In Vitro Meat: A Review

In vitro meat (IVM) is a recent development in the production of sustainable food. The consumer perception of IVM has a strong impact on the commercial success of IVM. Hence this review examines existing studies related to consumer concerns, acceptance and uncertainty of IVM. This will help create better marketing strategies for IVM-producing companies in the future. In addition, IVM production is described in terms of the types of cells and culture conditions employed. The applications of self-organising, scaffolding, and 3D printing techniques to produce IVM are also discussed. As the conditions for IVM production are controlled and can be manipulated, it will be feasible to produce a chemically safe and disease-free meat with improved consumer acceptance on a sustainable basis.

Finite element modeling of shape memory polyurethane foams for treatment of cerebral aneurysms

In this paper, a thermo-mechanical analysis of shape memory polyurethane foams (SMPUFs) with aiding of a finite element model (FEM) for treating cerebral aneurysms (CAs) is introduced. Since the deformation of foam cells is extremely difficult to observe experimentally due to their small size, a structural cell-assembly model is established in this work via finite element modeling to examine all-level deformation details. Representative volume elements of random equilateral Kelvin open-cell microstructures are adopted for the cell foam. Also, a user-defined material subroutine (UMAT) is developed based on a thermo-visco-elastic constitutive model for SMPUFs, and implemented in the ABAQUS software package. The model is able to capture thermo-mechanical responses of SMPUFs for a full shape memory thermodynamic cycle. One of the latest treatments of CAs is filling the inside of aneurysms with SMPUFs. The developed FEM is conducted on patient-specific basilar aneurysms treated by SMPUFs. Three sizes of foams are selected for the filling inside of the aneurysm and then governing boundary conditions and loadings are applied to the foams. The results of the distribution of stress and displacement in the absence and presence of the foam are compared. Due to the absence of similar results in the specialized literature, this paper is likely to fill a gap in the state of the art of this problem and provide pertinent results that are instrumental in the design of SMPUFs for treating CAs.

A novel approach for tetrahedral-element-based finite element simulations of anisotropic hyperelastic intervertebral disc behavior

Intervertebral discs are microstructurally complex spinal tissues that add greatly to the flexibility and mechanical strength of the human spine. Attempting to provide an adjustable basis for capturing a wide range of mechanical characteristics and to better address known challenges of numerical modeling of the disc, we present a robust finite-element-based model formulation for spinal segments in a hyperelastic framework using tetrahedral elements. We evaluate the model stability and accuracy using numerical simulations, with particular attention to the degenerated intervertebral discs and their likely skewed and narrowed geometry. To this end, 1) annulus fibrosus is modeled as a fiber-reinforced Mooney-Rivlin type solid for numerical analysis. 2) An adaptive state-variable dependent explicit time step is proposed and utilized here as a computationally efficient alternative to theoretical estimates. 3) Tetrahedral-element-based FE models for spinal segments under various loading conditions are evaluated for their use in robust numerical simulations. For flexion, extension, lateral bending, and axial rotation load cases, numerical simulations reveal that a suitable framework based on tetrahedral elements can provide greater stability and flexibility concerning geometrical meshing over commonly employed hexahedral-element-based ones for representation and study of spinal segments in various stages of degeneration.

Three dimensional porous scaffolds derived from collagen, elastin and fibrin proteins orchestrate adipose tissue regeneration

Current gold standard to treat soft tissue injuries caused by trauma and pathological condition are autografts and off the shelf fillers, but they have inherent weaknesses like donor site morbidity, immuno-compatibility and graft failure. To overcome these limitations, tissue-engineered polymers are seeded with stem cells to improve the potential to restore tissue function. However, their interaction with native tissue is poorly understood so far. To study these interactions and improve outcomes, we have fabricated scaffolds from natural polymers (collagen, fibrin and elastin) by custom-designed processes and their material properties such as surface morphology, swelling, wettability and chemical cross-linking ability were characterised. By using 3D scaffolds, we comprehensive assessed survival, proliferation and phenotype of adipose-derived stem cells in vitro. In vivo, scaffolds were seeded with adipose-derived stem cells and implanted in a rodent model, with X-ray microtomography, histology and immunohistochemistry as read-outs. Collagen-based materials showed higher cell adhesion and proliferation in vitro as well as higher adipogenic properties in vivo. In contrast, fibrin demonstrated poor cellular and adipogenesis properties but higher angiogenesis. Elastin formed the most porous scaffold, with cells displaying a non-aggregated morphology in vitro while in vivo elastin was the most degraded scaffold. These findings of how polymers present in the natural polymers mimicking ECM and seeded with stem cells affect adipogenesis in vitro and in vivo can open avenues to design 3D grafts for soft tissue repair.

Predicting Bone Formation in Mesenchymal Stromal Cell-Seeded Hydrogels Using Experiment-Based Mathematical Modeling

In vitro bone formation by mesenchymal stromal cells encapsulated in type-1 collagen hydrogels is demonstrated after a 28-day in vitro culture period. Analysis of the hydrogels is carried out by X-ray microcomputed tomography, histology, and immunohistochemistry, which collectively demonstrates that bone formation in the hydrogels was quantifiably proportional to the initial collagen concentration, and subsequently the population density of seeded cells. This was established by varying the initial collagen concentration at a constant cell seeding density (3 × 10⁵ cells/0.3 mL hydrogel), and separately varying cell seeding density at a constant collagen concentration (1 mg/mL). Using these data, a mathematical model is presented for the total hydrogel volume and mineralization volume based on the observed linear contraction dynamics of cell-seeded collagen gels. The model parameters are fitted by comparing the predictions of the mathematical model for the hydrogel and mineralized volumes on day 28 with the experimental data. The model is then used to predict the hydrogel and mineralization volumes for a range of hydrogel collagen concentrations and cell seeding densities, providing comprehensive input/output descriptors for generating mineralized hydrogels for bone tissue engineering. It is proposed that this quantitative approach will be a useful tool for generating in vitro manufactured bone tissue, defining input parameters that yield predictable output measures of tissue maturation. Impact statement This article describes a simple yet powerful quantitative description of in vitro tissue-engineered bone by combining experimental data with mathematical modeling. The overall aim of the article is to examine what is currently known about cell-mediated collagen contraction, and demonstrate that this phenomenon can be exploited to tailor bone formation by choosing a specific set of input parameters in the form of cell seeding density and collagen hydrogel concentration. Our study utilizes a clinically relevant cell source (human mesenchymal stem cells) with a biomaterial that has received regulatory approval for use in humans (collagen type 1), and hence could be useful for clinical applications, as well as furthering our understanding of cell/extracellular matrix interactions in determining in vitro bone tissue formation.

Diversity of extracellular matrix morphology in vertebrate skeletal muscle

Existing data suggest the extracellular matrix (ECM) of vertebrate skeletal muscle consists of several morphologically distinct layers: an endomysium, perimysium, and epimysium surrounding muscle fibers, fascicles, and whole muscles, respectively. These ECM layers are hypothesized to serve important functional roles within muscle, influencing passive mechanics, providing avenues for force transmission, and influencing dynamic shape changes during contraction. The morphology of the skeletal muscle ECM is well described in mammals and birds; however, ECM morphology in other vertebrate groups including amphibians, fish, and reptiles remains largely unexamined. It remains unclear whether a multilayered ECM is a common feature of vertebrate skeletal muscle, and whether functional roles attributed to the ECM should be considered in mechanical analyses of non-mammalian and non-avian muscle. To explore the prevalence of a multilayered ECM, we used a cell maceration and scanning electron microscopy technique to visualize the organization of ECM collagen in muscle from six vertebrates: bullfrogs (Lithobates catesbeianus), turkeys (Meleagris gallopavo), alligators (Alligator mississippiensis), cane toads (Rhinella marina), laboratory mice (Mus musculus), and carp (Cyprinus carpio). All muscles studied contained a collagen-reinforced ECM with multiple morphologically distinct layers. An endomysium surrounding muscle fibers was apparent in all samples. A perimysium surrounding groups of muscle fibers was apparent in all but carp epaxial muscle; a muscle anatomically, functionally, and phylogenetically distinct from the others studied. An epimysium was apparent in all samples taken at the muscle periphery. These findings show that a multilayered ECM is a common feature of vertebrate muscle and suggest that a functionally relevant ECM should be considered in mechanical models of vertebrate muscle generally. It remains unclear whether cross-species variations in ECM architecture are the result of phylogenetic, anatomical, or functional differences, but understanding the influence of such variation on muscle mechanics may prove a fruitful area for future research.

Current and upcoming therapies to modulate skin scarring and fibrosis

Skin is the largest organ of the human body. Being the interface between the body and the outer environment, makes it susceptible to physical injury. To maintain life, nature has endowed skin with a fast healing response that invariably ends in the formation of scar at the wounded dermal area. In many cases, skin remodelling may be impaired, leading to local hypertrophic scars or keloids. One should also consider that the scarring process is part of the wound healing response, which always starts with inflammation. Thus, scarring can also be induced in the dermis, in the absence of an actual wound, during chronic inflammatory processes. Considering the significant portion of the population that is subject to abnormal scarring, this review critically discusses the state-of-the-art and upcoming therapies in skin scarring and fibrosis.

The influence of cactus spine surface structure on puncture performance and anchoring ability is tuned for ecology

Spines are common morphological features found in almost all major biological groups offering an opportunity to explore large-scale evolutionary convergence across disparate clades. As an example, opuntioid cacti have spines with barbed ornamentation that is remarkably similar in form and scale to that found on porcupine quills, suggesting specific biomechanical convergence across the animal and plant kingdoms. While the mechanics of porcupine quills as defensive mechanisms has been previously tested, the mechanics of cactus spines (which have evolved to fill a number of functions including defence, climbing and dispersal) has not been characterized. Here we study the puncturing and anchoring ability of six species of cactus, including both barbed and non-barbed spines. We found that barbed spines require less work to puncture a variety of targets than non-barbed spines. Barbed spines also require more work than non-barbed spines to withdraw from biological materials, owing to their barbs engaging with tissue fibres. These results closely match those found previously for barbed versus non-barbed porcupine quills, implying biomechanical convergence. The variation in performance of barbed versus non-barbed spines, as well as between barbed spines from different species, is probably tied to the diversity of ecological functions of cactus spines.

Probing endogenous collagen by laser-induced autofluorescence in burn wound biopsies: A pilot study

The focus of the current study was to interrogate the predictive potential of laser-induced autofluorescence (LIAF) by objectively assessing collagen synthesis in burn wound granulation tissues ex vivo. Prior grafting, granulation tissues (20 samples) following burn injury were collected from 17 subjects of age range 18 to 60 years with patient/donor consent and the corresponding autofluorescence spectra were recorded at 325 nm He-Cd laser (≈2 mW) excitations. The resulting endogenous collagen intensity from the above tissue samples was computed by normalizing the nicotinamide adenine dinucleotide levels. In addition, the hydroxyproline content was also estimated biochemically from the same granulation tissues. A comparative assessment of both LIAF and biochemical estimations for endogenous collagen by hydroxyproline resulted in strong positive correlation among them. The above relevant observations suggest that LIAF is equally informative as that of biochemical estimations, in evaluating endogenous collagen content in wound granulation tissues. Thus, it can be concluded that LIAF has the predictive potential, as a noninvasive objective tool to measure the endogenous collagen levels in wound biopsy tissues and provide complementary data conducive for making clinical decisions.

Fabrication of Stand-Alone Cell-Laden Collagen Vascular Network Scaffolds Using Fugitive Pattern-Based Printing-Then-Casting Approach

Vascular networks are of great significance in tissue engineering and viewed as the first step to fabricate human tissues. Although various techniques have been investigated to create vascular and vascular-like networks, the fabrication of stand-alone pure collagen-based vascular constructs is still a challenge because of the poor extrudability, weak mechanical property, and long cross-linking time of pure collagen solutions. In this study, a fugitive pattern-based printing-then-casting approach is investigated. The proposed alginate-based fugitive ink has excellent mechanical strength (by adding Laponite nanoclay), printability (by adding Laponite nanoclay), and controllable gelation rate (by adding disodium hydrogen phosphate). Using this fugitive ink, complex vascular-like structures can be easily printed and cross-linked in Laponite EP bath as fugitive vascular tree patterns. Each fugitive vascular tree pattern is then embedded in a gelatin bath to make a gelatin mold with the tree patterns. With the help of sodium citrate, the fugitive vascular tree pattern is liquefied and removed to create the gelatin mold with vascular channels. Finally, a stand-alone collagen vascular network scaffold embedded with fibroblasts can be fabricated by casting the cell-laden collagen suspension into the gelatin mold and releasing it from the mold at 37 °C. The cell-related investigations indicate that the cells grow and spread well in the pure collagen vascular network scaffold. The proposed hybrid printing-then-casting approach also provides a feasible technology to fabricate with materials having low viscosity, long gelation time, and poor mechanical property.

Asymmetrical intrapleural pressure distribution: a cause for scoliosis? A computational analysis

PURPOSE

The mechanical link between the pleural physiology and the development of scoliosis is still unresolved. The intrapleural pressure (IPP) which is distributed across the inner chest wall has yet been widely neglected in etiology debates. With this study, we attempted to investigate the mechanical influence of the IPP distribution on the shape of the spinal curvature.

METHODS

A finite element model of pleura, chest and spine was created based on CT data of a patient with no visual deformities. Different IPP distributions at a static end of expiration condition were investigated, such as the influence of an asymmetry in the IPP distribution between the left and right hemithorax. The results were then compared to clinical data.

RESULTS

The application of the IPP resulted in a compressive force of 22.3 N and a flexion moment of 2.8 N m at S1. An asymmetrical pressure between the left and right hemithorax resulted in lateral deviation of the spine towards the side of the reduced negative pressure. In particular, the pressure within the dorsal section of the rib cage had a strong influence on the vertebral rotation, while the pressure in medial and ventral region affected the lateral displacement.

CONCLUSIONS

An asymmetrical IPP caused spinal deformation patterns which were comparable to deformation patterns seen in scoliotic spines. The calculated reaction forces suggest that the IPP contributes in counterbalancing the weight of the intrathoracic organs. The study confirms the potential relevance of the IPP for spinal biomechanics and pathologies, such as adolescent idiopathic scoliosis.

Insights Into the Role of Collagen in Vocal Fold Health and Disease

As one of the key fibrous proteins in the extracellular matrix, collagen plays a significant role in the structural and biomechanical characteristics of the vocal fold. Anchored fibrils of collagen create secure structural regions within the vocal folds and are strong enough to sustain vibratory impact and stretch during phonation. This contributes tensile strength, density, and organization to the vocal folds and influences health and pathogenesis. This review offers a comprehensive summary for a current understanding of collagen within normal vocal fold tissues throughout the life span as well as vocal pathology and wound repair. Further, collagen's molecular structure and biosynthesis are discussed. Finally, collagen alterations in tissue injury and repair and the incorporation of collagen-based biomaterials as a method of treating voice disorders are reviewed.

A perspective on structural and computational work on collagen

Collagen is the single most abundant protein in the extracellular matrix in the animal kingdom, with remarkable structural and functional diversity and regarded one of the most useful biomaterials.

Biomedical Biopolymers, their Origin and Evolution in Biomedical Sciences: A Systematic Review

Biopolymers provide a plethora of applications in the pharmaceutical and medical applications. A material that can be used for biomedical applications like wound healing, drug delivery and tissue engineering should possess certain properties like biocompatibility, biodegradation to non-toxic products, low antigenicity, high bio-activity, processability to complicated shapes with appropriate porosity, ability to support cell growth and proliferation and appropriate mechanical properties, as well as maintaining mechanical strength. This paper reviews biodegradable biopolymers focusing on their potential in biomedical applications. Biopolymers most commonly used and most abundantly available have been described with focus on the properties relevant to biomedical importance.

Molecular mapping of poly(methyl methacrylate) super-helix stereocomplexes

In this study, by using X-ray powder diffraction profiles as blueprints, we successfully mapped the most probable molecular-level structural arrangement of the PMMA super-helix stereocomplexes through molecular dynamic simulations. Molecular-level resolution of the PMMA triple-helix supramolecule was not previously achievable by experimental methods. After constructing molecular models of stereo-regular complexes composed of linear it- and st-PMMAs, our all-atom molecular dynamics simulations identified the stereocomplex structure that best reproduces experimental diffraction profiles and thermodynamic properties as a double helix of isotactic (it-)PMMA with a helical pitch of 1.8 nm and 9 units per turn surrounded by a single helix of syndiotactic (st-)PMMA with an average helical pitch of 0.9 nm and 20 units per turn. The it-/st- complexing stoichiometry in the PMMA triple-helix is therefore 9 : 20. This presents the first all-atom model of the it-/st-PMMA triple-helix stereocomplex that accurately fits experimental X-ray diffraction profiles. In addition, the simulation results revealed the outer st-PMMA helix of the PMMA stereocomplex has a fiber diameter of at least 1.85 nm and adopts a non-ideal helical geometry. Furthermore, through dynamic simulations, surprising new sights into the effect of the structural configuration of the PMMA stereocomplex (i.e., helical pitch and direction, and tilt angle) on the physical properties of their crystal structures were obtained. Those crystal properties include X-ray diffraction profile, packing density, chain-chain spacing, chain width and cohesive energy density.

Application of retinoic acid improves form and function of tissue engineered corneal construct

Retinoic acid has recently been shown to control the phenotype and extracellular matrix composition of corneal stromal cells cultured in vitro as monolayers. This study set out to investigate the effects of retinoic acid on human corneal keratocytes within a 3D environment. Human corneal keratocytes were encapsulated in collagen gels, which were subsequently compressed under load, and cultured in serum-free media supplemented with 10 µM retinoic acid or DMSO vehicle for 30 days. Cell proliferation was quantified on selected days, while the expression of several important keratocytes markers was evaluated at day 30 using RT-PCR and immunoblotting. The weight and size of the collagen constructs were measured before and after hydration and contraction analyses. Retinoic acid enhanced keratocyte proliferation until day 30, whereas cells in control culture conditions showed reduced numbers after day 21. Both gene and protein expressions of keratocyte-characteristic proteoglycans (keratocan, lumican and decorin), corneal crystallins and collagen type I and V were significantly increased following retinoic acid supplementation. Retinoic acid also significantly reduced the expression of matrix metalloproteases 1, 3 and 9 while not increasing α-smooth muscle actin and fibronectin expression. Furthermore, these effects were also correlated with the ability of retinoic acid to significantly inhibit the contractility of keratocytes while allowing the build-up of corneal stromal extracellular matrix within the 3D constructs. Thus, retinoic acid supplementation represents a promising strategy to improve the phenotype of 3D-cultured keratocytes, and their usefulness as a model of corneal stroma for corneal biology and regenerative medicine applications.

Influence of sterilisation methods on collagen-based devices stability and properties

Sterilisation is essential for any implantable medical device in order to prevent infection in patients. The selection of the most appropriate sterilisation method depends on the nature and the physical state of the material to be sterilised; the influence of the sterilisation method on the properties of the device; and the type of the potential contaminant. In this context, herein we review the influence of ethylene oxide, γ-irradiation, e-beam irradiation, gas plasma, peracetic acid and ethanol on structural, biomechanical, biochemical and biological properties of collagen-based devices. Data to-date demonstrate that chemical approaches are associated with cytotoxicity, whilst physical methods are associated with degradation, subject to the device physical characteristics. Thus, the sterilisation method of choice is device dependent.

Natural and Genetically Engineered Proteins for Tissue Engineering

To overcome the limitations of traditionally used autografts, allografts and, to a lesser extent, synthetic materials, there is the need to develop a new generation of scaffolds with adequate mechanical and structural support, control of cell attachment, migration, proliferation and differentiation and with bio-resorbable features. This suite of properties would allow the body to heal itself at the same rate as implant degradation. Genetic engineering offers a route to this level of control of biomaterial systems. The possibility of expressing biological components in nature and to modify or bioengineer them further, offers a path towards multifunctional biomaterial systems. This includes opportunities to generate new protein sequences, new self-assembling peptides or fusions of different bioactive domains or protein motifs. New protein sequences with tunable properties can be generated that can be used as new biomaterials. In this review we address some of the most frequently used proteins for tissue engineering and biomedical applications and describe the techniques most commonly used to functionalize protein-based biomaterials by combining them with bioactive molecules to enhance biological performance. We also highlight the use of genetic engineering, for protein heterologous expression and the synthesis of new protein-based biopolymers, focusing the advantages of these functionalized biopolymers when compared with their counterparts extracted directly from nature and modified by techniques such as physical adsorption or chemical modification.

Design of nano- and microfiber combined scaffolds by electrospinning of collagen onto starch-based fiber meshes: a man-made equivalent of natural extracellular matrix

Mimicking the structural organization and biologic function of natural extracellular matrix has been one of the main goals of tissue engineering. Nevertheless, the majority of scaffolding materials for bone regeneration highlights biochemical functionality in detriment of mechanical properties. In this work we present a rather innovative construct that combines in the same structure electrospun type I collagen nanofibers with starch-based microfibers. These combined structures were obtained by a two-step methodology and structurally consist in a type I collagen nano-network incorporated on a macro starch-based support. The morphology of the developed structures was assessed by several microscopy techniques and the collagenous nature of the nano-network was confirmed by immunohistochemistry. In addition, and especially regarding the requirements of large bone defects, we also successfully introduced the concept of layer by layer, as a way to produce thicker structures. In an attempt to recreate bone microenvironment, the design and biochemical composition of the combined structures also envisioned bone-forming cells and endothelial cells (ECs). The inclusion of a type I collagen nano-network induced a stretched morphology and improved the metabolic activity of osteoblasts. Regarding ECs, the presence of type I collagen on the combined structures provided adhesive support and obviated the need of precoating with fibronectin. It was also importantly observed that ECs on the nano-network organized into circular structures, a three-dimensional arrangement distinct from that observed for osteoblasts and resembling the microcappillary-like organizations formed during angiogenesis. By providing simultaneously physical and chemical cues for cells, the herein-proposed combined structures hold a great potential in bone regeneration as a man-made equivalent of extracellular matrix.

Initial investigation of novel human-like collagen/chitosan scaffold for vascular tissue engineering

With the increasing occurrence of vascular diseases and poor long-term patency rates of current small diameter vascular grafts, it becomes urgent to pursuit biomaterial as scaffold to mimic blood vessel morphologically and mechanically. In this study, novel human-like collagen (HLC, produced by recombinant E. coli)/chitosan tubular scaffolds were fabricated by cross-linking and freeze-drying process. The scaffolds were characterized by scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and tensile test, respectively. Human venous fibroblasts were expanded and seeded onto the scaffolds in the density of 1 x 10(5) cells/cm(2). After a 15-day culture under static conditions, the cell-polymer constructs were observed using SEM, confocal laser scanning microscopy (CLSM), histological examination, and biochemical assays for cell proliferation and extracellular matrix production (collagen and glycosaminoglycans). Furthermore, the scaffolds were implanted into rabbits' livers to evaluate their biocompatibility. The results indicated that HLC/chitosan tubular scaffolds (1) exhibited interconnected porous structure; (2) achieved the desirable levels of pliability (elastic up to 30% strain) and stress of 300 +/- 16 kPa; (3) were capable of enhancing cell adhesion and proliferation and ECM secretion; (4) showed superior biocompatibility. This study suggested the feasibility of HLC/chitosan composite as a promising candidate scaffold for blood vessel tissue engineering.

Biomedical applications of collagen

Collagen is regarded as one of the most useful biomaterials. The excellent biocompatibility and safety due to its biological characteristics, such as biodegradability and weak antigenecity, made collagen the primary resource in medical applications. The main applications of collagen as drug delivery systems are collagen shields in ophthalmology, sponges for burns/wounds, mini-pellets and tablets for protein delivery, gel formulation in combination with liposomes for sustained drug delivery, as controlling material for transdermal delivery, and nanoparticles for gene delivery and basic matrices for cell culture systems. It was also used for tissue engineering including skin replacement, bone substitutes, and artificial blood vessels and valves. This article reviews biomedical applications of collagen including the collagen film, which we have developed as a matrix system for evaluation of tissue calcification and for the embedding of a single cell suspension for tumorigenic study. The advantages and disadvantages of each system are also discussed.

Effects of pars flaccida on sound conduction in ears of Mongolian gerbil: acoustic and anatomical measurements

This paper presents evidence on how the pars flaccida of the tympanic membrane affects the acoustic input to the middle and inner ear. Measurements of middle-ear acoustic input admittance and sound-pressure levels in both the ear canal and the middle-ear cavity were made in ears of eight gerbils before and after manipulations of the middle ear and tympanic membrane. The results are interpreted in terms of a model proposed by Kohllöffel [Hear, Res. 13(1984) 83-88]. The input-admittance measurements show that the pars flaccida of gerbil acts as a resonator with a resonance frequency of approx. 500 Hz. The admittance of this resonator appears in parallel with the input admittance of the pars tensa and its ossicular and cochlear load. At frequencies below the resonance, the pars flaccida admittance is compliance-like and its magnitude is comparable to that of the pars tensa and its load; consequently, the presence of pars flaccida increases the overall middle-ear input admittance and decreases the pressure difference across the tympanic membrane. At higher frequencies, the admittance of pars flaccida is mass-like and small in magnitude, and it has negligible influence on the overall middle-ear input admittance and the pressure difference across the tympanic membrane. These results suggest that the presence of pars flaccida reduces low-frequency acoustic input to the middle- and inner-ear and consequently decreases hearing sensitivity in this frequency range. Our measurements suggest that with a constant sound pressure stimulus, stiffening the gerbil pars flaccida would increase the motion of the pars tensa by 3-10 dB at frequencies below the normal flaccida resonance.

ORGANIZATION AND DISORGANIZATION OF COLLAGEN

The organization of the normal collagen molecule and fibrils is reviewed and the detection, assay, and isolation of a collagenolytic enzyme from amphibian tadpole tissue are described and its possible significance in metamorphosis is discussed