Protoplast preparation and regeneration from spores of the biocontrol fungus Pseudozyma flocculosa

PEG-Mediated Protoplast Transformation of Penicillium sclerotiorum (scaumcx01): Metabolomic Shifts and Root Colonization Dynamics

Protoplast-based transformation is a vital tool for genetic studies in fungi, yet no protoplast method existed for P. sclerotiorum-scaumcx01 before this study. Here, we optimized protoplast isolation, regeneration, and transformation efficiency. The highest protoplast yield (6.72 × 106 cells/mL) was obtained from liquid mycelium after 12 h of enzymatic digestion at 28 °C using Lysing Enzymes, Yatalase, cellulase, and pectinase. Among osmotic stabilizers, 1 M MgSO4 yielded the most viable protoplasts. Regeneration occurred via direct mycelial outgrowth and new protoplast formation, with a 1.02% regeneration rate. PEG-mediated transformation with a hygromycin resistance gene and GFP tagging resulted in stable GFP expression in fungal spores and mycelium over five generations. LC/MS-based metabolomic analysis revealed significant changes in glycerophospholipid metabolism, indicating lipid-related dynamics influenced by GFP tagging. Microscopy confirmed successful colonization of tomato roots by GFP-tagged scaumcx01, with GFP fluorescence observed in cortical tissues. Enzymatic (cellulase) seed pretreatment enhanced fungal colonization by modifying root surface properties, promoting plant-fungal interaction. This study establishes an efficient protoplast transformation system, reveals the metabolic impacts of genetic modifications, and demonstrates the potential of enzymatic seed treatment for enhancing plant-fungal interactions.

Chromosome-Scale Genome and Transcriptomic Analyses Reveal Differential Regulation of Terpenoid Secondary Metabolites in Hericium coralloides

Construction of the genome of Hericium coralloides, a species of edible mushroom, and identification of the genes involved in terpenoid biosynthesis can determine the biology and genetics of terpenoids. The present study describes the assembly of a high-quality chromosome-scale genome of H. coralloides using Pacbio HiFi sequencing and Hi-C technology. This genome consisted of 13 chromosomes, a total size of 43.6 Mb, contigs of N50 3.6 Mb, GC content at 54%, and BUSCOs integrity of 96.9%. Genes associated with terpenoid biosynthesis were predicted by KEGG enrichment analysis and homologous alignment. The Her011461 and Her008335 genes, encoding proteins in the terpenoid backbone synthesis pathway, were found to encode geranylgeranyl pyrophosphate and farnesyl diphosphate synthases, key enzymes in the biosynthesis of geranylgeranyl diphosphate, a precursor of several diterpenoids. Her011463 was found to be involved in regulating diterpene cyclase. The Her005433, Her006724, Her010605, and Her010608 genes were found to encode sesquiterpene synthesis. Most of these genes were more highly expressed in dikaryotic mycelia than in the primordium and fruiting bodies, indicating that terpenoids may be more abundant in dikaryotic mycelia. To our knowledge, this study is the first to assemble the H. coralloides genome at the chromosome scale and to identify the genes involved in terpenoid biosynthesis.

An Overview of Mycoviral Curing Strategies Used in Evaluating Fungal Host Fitness

The number of novel mycoviruses is increasing at a high pace due to advancements in sequencing technologies. As a result, an uncountable number of mycoviral sequences are available in public sequence repositories. However, only genomic information is not sufficient to understand the impact of mycoviruses on their host biology. Biological characterization is required to determine the nature of mycoviruses (cryptic, hypervirulent, or hypovirulent) and to search for mycoviruses with biocontrol and therapeutic potential. Currently, no particular selective method is used as the gold standard against these mycoviral infections. Given the importance of curing, we present an overview of procedures used in preparation of isogenic lines, along with their benefits and drawbacks. We concluded that a combination of single-spore isolation and hyphal tipping is the best fit for preparation of isogenic lines. Furthermore, recent bioinformatic approaches should be introduced in the field of mycovirology to predict virus-specific antivirals to get robust results.

A unique effector secreted by Pseudozyma flocculosa mediates its biocontrol activity

BACKGROUND

Pseudozyma flocculosa is a highly efficient biocontrol agent (BCA) of powdery mildews whose mode of action remains elusive. It is known to secrete unique effectors during its interaction with powdery mildews but effectors have never been shown to be part of the arsenal of a BCA. Here, we characterize the role of the effector Pf2826 released by Pseudozyma flocculosa during its tripartite interaction with barley and the pathogen fungus Blumeria graminis f. sp. hordei.

RESULTS

We utilized CRISPR-Cas9-based genome editing and confirmed that secreted P. flocculosa effector Pf2826 is required for full biocontrol activity. We monitored the localization of the effector Pf2826 with C-terminal mCherry tag and found it localized around the haustoria and on powdery mildew spores. His-tagged Pf2826 recombinant protein was expressed, purified, and used as bait in a pull-down assay from total proteins extracted during the tripartite interaction. Potential interactors were identified by LC-MS/MS analysis after removing unspecific interactions found in the negative controls. A two-way yeast two-hybrid assay validated that Pf2826 interacted with barley pathogenesis-related (PR) proteins HvPR1a and chitinase and with an effector protein from powdery mildew.

CONCLUSIONS

In contrast to the usual modes of action of competition, parasitism, and antibiosis ascribed to BCAs, this study shows that effector pf2826 plays a vital role in the biocontrol activity of P. flocculosa by interacting with plant PR proteins and a powdery mildew effector, altering the host-pathogen interaction.

Ursodeoxycholic acid production by Gibberella zeae mutants

Ursodeoxycholic acid (UDCA) is a highly demanded pharmaceutical steroid widely used in medicine. An ascomycete Gibberella zeae VKM F-2600 is capable of producing UDCA by 7β-hydroxylation of lithocholic acid (LCA). The present study is aimed at the improvement of the fungus productivity. The original procedures for the protoplast obtaining followed by UV mutagenesis and screening of ketoconazole-resistant mutant clones have been applied. The highest yield of G. zeae protoplasts was obtained when using the mycelium in the active growth phase, ammonium chloride as an osmotic stabilizer and treatment of the fungal cells by the lytic enzymes cocktail from Trichoderma hurzanium. The conditions for effective protoplast regeneration and the UV-mutagenesis were found to provide 6–12% survival rate of the protoplasts with superior number of possible mutations. Three of 27 ketoconazole-resistant mutant clones obtained have been selected due to their increased biocatalytic activity towards LCA. The mutant G. zeae M23 produced 26% more UDCA even at relatively high LCA concentration (4 g/L) as compared with parent fungal strain, and the conversion reached 88% (w/w). The yield of UDCA reached in this study prefers those ever reported. The results contribute to the knowledge on ascomycete mutagenesis, and are of importance for biotechnological production of value added cholic acids.

Efficient procedures for production and regeneration of Gibberella zeae protoplasts were determined.

Fungal mutants were obtained with elevated 7β-hydroxylase activity.

Mutant G. zeae M23 almost fully converts LCA (4 g/L) to UDCA.

Glycolipid Biosurfactant Production from Waste Cooking Oils by Yeast: Review of Substrates, Producers and Products

Biosurfactants are a microbially synthesized alternative to synthetic surfactants, one of the most important bulk chemicals. Some yeast species are proven to be exceptional biosurfactant producers, while others are emerging producers. A set of factors affects the type, amount, and properties of the biosurfactant produced, as well as the environmental impact and costs of biosurfactant’s production. Exploring waste cooking oil as a substrate for biosurfactants’ production serves as an effective cost-cutting strategy, yet it has some limitations. This review explores the existing knowledge on utilizing waste cooking oil as a feedstock to produce glycolipid biosurfactants by yeast. The review focuses specifically on the differences created by using raw cooking oil or waste cooking oil as the substrate on the ability of various yeast species to synthesize sophorolipids, rhamnolipids, mannosylerythritol lipids, and other glycolipids and the substrate’s impact on the composition, properties, and limitations in the application of biosurfactants.

Optimization of Polyethylene Glycol-Mediated Transformation of the Pepper Anthracnose Pathogen Colletotrichum scovillei to Develop an Applied Genomics Approach

Colletotrichum acutatum is a species complex responsible for anthracnose disease in a wide range of host plants. Strain C. acutatum KC05, which was previously isolated from an infected pepper in Gangwon Province of South Korea, was reidentified as C. scovillei using combined sequence analyses of multiple genes. As a prerequisite for understanding the pathogenic development of the pepper anthracnose pathogen, we optimized the transformation system of C. scovillei KC05. Protoplast generation from young hyphae of KC05 was optimal in an enzymatic digestion using a combined treatment of 2% lysing enzyme and 0.8% driselase in 1 M NH₄Cl for 3 h incubation. Prolonged incubation for more than 3 h decreased protoplast yields. Protoplast growth of KC05 was completely inhibited for 4 days on regeneration media containing 200 μg/ml hygromycin B, indicating the viability of this antibiotic as a selection marker. To evaluate transformation efficiency, we tested polyethylene glycol-mediated protoplast transformation of KC05 using 19 different loci found throughout 10 (of 27) scaffolds, covering approximately 84.1% of the entire genome. PCR screening showed that the average transformation efficiency was about 17.1% per 100 colonies. Southern blot analyses revealed that at least one transformant per locus had single copy integration of PCR-screened positive transformants. Our results provide valuable information for a functional genomics approach to the pepper anthracnose pathogen C. scovillei.

Enzymatic Production and Characterization of Pectic Oligosaccharides Derived from Citrus and Apple Pectins: A GC-MS Study Using Random Forests and Association Rule Learning

Pectic oligosaccharides (POS) from citrus and apple pectin hydrolysis using ViscozymeL and Glucanex200G have been obtained. According to the results, maximum POS formation was achieved from citrus pectin after 30 min of hydrolysis with ViscozymeL, with a yield of 652 mg g^-1 and average molecular mass ( M_w) of 0.8-2.5 kDa, while with Glucanex200G, the yield was 518 mg g^-1 and M_w was 0.8-7.1 kDa. Digalacturonic and trigalacturonic acids were identified among other low M_w compounds as di- and tri-POS. In addition, differences in GC-MS spectra of all oligosaccharides found in the hydrolysates were studied by employing random forests and other algorithms to identify structural differences between the obtained POS, and high prediction rates were shown for new samples. Chemical structures were proposed for some influential m/ z ions, and 12 association rules that explain differences according to pectin and enzyme origin were built. This information could be used to establish structure-function relationships of POS.

CRISPR/Cas9-mediated gene replacement in the basidiomycetous yeast Pseudozyma antarctica

The basidiomycetous yeast, Pseudozyma antarctica, has the ability to express industrially beneficial biodegradable plastic-degrading enzyme (PaE) and glycolipids. In this study, we developed a highly efficient gene-targeting method in P. antarctica using a CRISPR/Cas9 gene-editing approach. Transformation of protoplast cells was achieved by incubation with a ribonucleoprotein (RNP) complex prepared by mixing the Cas9 protein with a single-guide RNA together with donor DNA (dDNA) containing a selectable marker in vitro. The PaE gene was selected as the targeted locus for gene disruption and gene-disrupted colonies were readily detected by their ability to degrade polybutylene succinate-co-adipate on solid media. The accuracy of the gene conversion event was confirmed by colony PCR. An increase in the RNP mix increased both transformation and gene disruption efficiencies. Examining the effect of the homology arm length of the dDNA revealed that dDNA with homology arms longer than 0.1 kb induced efficient homologous recombination in our system. Furthermore, this system was successful in another targeted locus, PaADE2. Following the creation of RNP-induced double-strand break of the chromosomal DNA, dDNA could be inserted into the target locus even in the absence of homology arms.

Establishment of polyethylene-glycol-mediated protoplast transformation for Lecanicillium lecanii and development of virulence-enhanced strains against Aphis gossypii

BACKGROUND

Lecanicillium lecanii has been developed as a biopesticide and used in biological control of several agricultural insects. To improve fungal virulence, an optimised polyethylene glycol (PEG)-mediated protoplast transformation system was established for L. lecanii. Pr1A-like cuticle-degrading protease gene (Cdep1) from Beauveria bassiana was transferred into L. lecanii, and its resulting activity against Aphis gossypii was assessed.

RESULTS

The optimised protoplast generation yielded 2.5 × 10(8) protoplasts g(-1) wet mycelium of fungi, and gave nearly 98% viability and 80% regeneration on plates. Protease activities were increased about fivefold in transformants expressing CDEP1. The median lethal concentration (LC50 ) for transformants expressing CDEP1 was twofold lower than that for the wild type (WT). The median survival time (LT50 ) for transformants expressing CDEP1 was also 14.2% shorter than that for WT, though no significant difference. There were no significant differences in conidial germination as colony growth and conidial yield on plates between transformants expressing CDEP1 and WT. The transformants expressing CDEP1 grew significantly quicker than WT in insects. The transformants expressing CDEP1 were lower in conidial yields on insect cadavers, but insignificantly different from WT.

CONCLUSION

The PEG-mediated protoplast transformation system was effective for L. lecanii, and the expression of CDEP1 significantly enhanced fungal virulence against cotton aphids. © 2016 Society of Chemical Industry.

A Caleosin-Like Protein with Peroxygenase Activity Mediates Aspergillus flavus Development, Aflatoxin Accumulation, and Seed Infection

Caleosins are a small family of calcium-binding proteins endowed with peroxygenase activity in plants. Caleosin-like genes are present in fungi; however, their functions have not been reported yet. In this work, we identify a plant caleosin-like protein in Aspergillus flavus that is highly expressed during the early stages of spore germination. A recombinant purified 32-kDa caleosin-like protein supported peroxygenase activities, including co-oxidation reactions and reduction of polyunsaturated fatty acid hydroperoxides. Deletion of the caleosin gene prevented fungal development. Alternatively, silencing of the gene led to the increased accumulation of endogenous polyunsaturated fatty acid hydroperoxides and antioxidant activities but to a reduction of fungal growth and conidium formation. Two key genes of the aflatoxin biosynthesis pathway, aflR and aflD, were downregulated in the strains in which A. flavus PXG (AfPXG) was silenced, leading to reduced aflatoxin B1 production in vitro. Application of caleosin/peroxygenase-derived oxylipins restored the wild-type phenotype in the strains in which AfPXG was silenced. PXG-deficient A. flavus strains were severely compromised in their capacity to infect maize seeds and to produce aflatoxin. Our results uncover a new branch of the fungal oxylipin pathway and may lead to the development of novel targets for controlling fungal disease.

Combination of driselase and lysing enzyme in one molar potassium chloride is effective for the production of protoplasts from germinated conidia of Fusarium verticillioides

Various cell wall degrading enzymes and the protoplasting media were evaluated for the production of protoplast in Fusarium verticillioides. Among the various enzymes tested, driselase at 12.5 mg/ml in 1 M KCl protoplasting medium produced the maximum number of protoplast. Next to driselase, lysing enzyme at 10 mg/ml in 1.2 M MgSO4 protoplasting medium was found to be the second best enzyme for the production of protoplast. More interestingly, the combined use of driselase @ 12.5 mg/ml and lysing enzyme @ 10 mg/ml in 1 M KCl exhibited the additive effect on protoplast formation. Germinated conidia of F. verticillioides are the most susceptible fungal material for protoplast production. The use of sucrose at 1.2 M in the regeneration medium supported the maximum regeneration of protoplast. From the present study, we recommend driselase (12.5 mg/ml) and lysing enzyme (10 mg/ml) in 1 M KCl protoplasting medium and germinated conidia of F. verticillioides for the maximum production of protoplasts and 1.2 M sucrose is the best osmoticum for the regeneration of protoplasts.

Comparative conventional- and quantum dot-labeling strategies for LPS binding site detection in Arabidopsis thaliana mesophyll protoplasts

Lipopolysaccharide (LPS) from Gram-negative bacteria is recognized as a microbe-associated molecular pattern (MAMP) and not only induces an innate immune response in plants, but also stimulates the development of characteristic defense responses. However, identification and characterization of a cell surface LPS-receptor/binding site, as described in mammals, remains elusive in plants. As an amphiphilic, macromolecular lipoglycan, intact LPS potentially contains three MAMP-active regions, represented by the O-polysaccharide chain, the core and the lipid A. Binding site studies with intact labeled LPS were conducted in Arabidopsis thaliana protoplasts and quantified using flow cytometry fluorescence changes. Quantum dots (Qdots), which allow non-covalent, hydrophobic labeling were used as a novel strategy in this study and compared to covalent, hydrophilic labeling with Alexa 488. Affinity for LPS-binding sites was clearly demonstrated by concentration-, temperature-, and time-dependent increases in protoplast fluorescence following treatment with the labeled LPS. Moreover, this induced fluorescence increase was convincingly reduced following pre-treatment with excess unlabeled LPS, thereby indicating reversibility of LPS binding. Inhibition of the binding process is also reported using endo- and exocytosis inhibitors. Here, we present evidence for the anticipated presence of LPS-specific binding sites in Arabidopsis protoplasts, and furthermore propose Qdots as a more sensitive LPS-labeling strategy in comparison to the conventional Alexa 488 hydrazide label for binding studies.

Genome shuffling of Aspergillus glaucus HGZ-2 for enhanced cellulase production

The production of cellulase from Aspergillus glaucus HGZ-2 was improved by using genome shuffling. The starting populations, obtained by UV irradiation, were subjected to recursive protoplast fusion. The optimal conditions for protoplast formation and regeneration were 7 mg/ml snailase and 5 mg/ml cellulase at 34 °C for 3.0 h using 0.7 M NaCl as an osmotic stabilizer. The protoplasts were inactivated under UV for 30 min or heated at 50 °C for 50 min, and a fusant probability of about 100 % was observed. The positive colonies were created by fusing the inactivated protoplasts. The optimal conditions for protoplast fusion were PEG6000 concentration of 35 %, CaCl2 concentration of 0.02 M, and incubation time of 12 min. After two rounds of genome shuffling, one strain (Y) was obtained. Its filter paper cellulase (FPase) and carboxymethyl cellulase (CMCase) activity reached 71 and 70 U/ml, respectively, which were increased by 1.95-fold and 1.72-fold in comparison with that of its ancestor strain. The results indicated that genome shuffling was an efficient means for the improved production of cellulases by A. glaucus HGZ-2.

Isolation and fusion of protoplasts from the phytopathogenic fungus sclerotium rolfsii(sacc.)

Sclerotium rolfsii (Sacc.) is a serious plant pathogenic fungus and lacks perfect (basidial) stage in production. Protoplast fusion technology was employed to reconstruct fusants from this fungus. Two strains designated as A and R were used. Maximum protoplast yields of 3.8x10⁵/g mycelia and 2.8x10⁵/g mycelia were formed in strains A and R respectively. Osmotic stabilizer sucrose 1M gave maximum yield. Lysing enzyme at the rate of 15mg/ml was found best for yield. Fusion of protoplasts from strains A and R was carried out in fusion media containing PEG 4000 30% (w/v) with 0.2mM CaCl₂. Four fusants F1, F2, F3 and F4 were recovered. Morphological, physiological and pathogenic characters of fusants were compared with parent strains on carrots, beans and tomato.

Alternative methods for genetic transformation of Pseudozyma antarctica, a basidiomycetous yeast-like fungus

Electroporation and Agrobacterium tumefaciens-mediated transformation (ATMT) were adapted and optimized for genetic transformation of the basidiomycetous yeast-like fungus Pseudozyma antarctica as alternatives to the cumbersome PEG/CaCl(2)-mediated transformation of protoplasts. Electroporation yielded 100-200 transformants per mug of DNA per 10(8) cells after 3 days on selective medium. For its part, ATMT yielded 60-160 transformants per 10(6) input cfu after 5-10 days on a selective medium. Transformants obtained from both methods showed stable hygromycin resistance and strong expression of green fluorescent protein. Analysis of integration events revealed a limited number of predominantly tandem insertions in the genome of transformants, an improvement over PEG/CaCl(2)-mediated transformation. Both protocols relied on intact conidia of P. antarctica as starting material and thus eliminated the need for cell wall-degrading or weakening agents such as lytic enzymes or chemicals. Other advantages over protoplast transformation included higher yield of transformants and shorter recovery time of transformed colonies on selective medium.

Cloning of the glyceraldehyde-3-phosphate dehydrogenase gene from Pseudozyma flocculosa and functionality of its promoter in two Pseudozyma species

Pseudozyma flocculosa is a yeast-like epiphyte recently classified as a basidiomycete related to the Ustilaginales. In this study, we report the cloning of its gene coding for a putative glyceraldehyde-3-phosphate dehydrogenase (GPD). This gene was selected on the premise that its transcripts are abundant during the growth phase of P. flocculosa. The complete sequence of this gene was found to contain two introns in the coding region and one in the 3'-untranslated region. This gene was present in a single copy in the genome of P. flocculosa. By comparing its deduced amino acid sequence with various sequences from basidiomycetous and ascomycetous fungi, we observed a stronger homology with the former group as predicted by the new classification of P. flocculosa. The promoter region lacked a typical TATA or CAAT box but contained a CT-rich region including the transcription start site. Although the GPD promoter showed a stronger affinity within P. flocculosa, it remained active across species as shown by expressing the green fluorescent protein in Pseudozyma antarctica. The cloning of this gene and its promoter brings new and versatile options to the limited genetic tools currently available for the study of the recently defined Pseudozyma genus.

GFP technology for the study of biocontrol agents in tritrophic interactions: A case study with Pseudozyma flocculosa

GFP technology was applied to the biocontrol agent (BCA) Pseudozyma flocculosa to study its development and interactions at the tritrophic level plant-powdery mildew-BCA. Transformation experiments with GFP led to the production of a strongly fluorescent strain, Act-4, that displayed biocontrol traits typical of P. flocculosa WT. Following inundative applications, growth of P. flocculosa Act-4 was closely and almost exclusively associated with the colonies of the pathogen regardless of the powdery mildew species or the host plant tested. Development of P. flocculosa Act-4 on control leaves alone was extremely limited 24 h after its application and was typical of the epiphytic growth characterizing this type of yeast-like fungus. Based on the strong correlation between the colonization pattern of the different powdery mildew species tested and the presence of P. flocculosa Act-4, as determined by its fluorescence, it seems that growth of the BCA is dependant on the presence of powdery mildews. These results demonstrate that the GFP technology can be used to study plant-pathogen-BCA interactions and fulfill a wide array of purposes ranging from fundamental observations of the biocontrol behavior of a BCA to very applied ones serving some of the requirements for the registration of BCA's such as defining their environmental fate.

The Pseudozyma flocculosa actin promoter allows the strong expression of a recombinant protein in the Pseudozyma species

Fungi belonging to the recently classified genus Pseudozyma possess some unique properties such as biocontrol activity, production of rare antimicrobial glycolipids and production of recombinant proteins. In this work, we report the first cloning of a promoter endogenous to the multi-faceted yeast-like Pseudozyma flocculosa, that of the actin gene. The promoter region lacked typical TATA or CAAT box but displayed three putative GC box and two CT-rich regions. As in other related basidiomycetes, only one copy of the actin gene was present in the genome of P. flocculosa. The activity of the actin promoter was compared to that of the HSP70 promoter from Ustilago maydis in two Pseudozyma species. In P. flocculosa, the actin promoter allowed the expression of a very high amount of GFP protein (27.8 mg g(-1) total protein) compared to those obtained with the HSP70 promoter in liquid culture. By contrast, the levels of GFP expression obtained in liquid culture were similar with the actin or the HSP70 promoter in Pseudozyma antarctica. A similar pattern of GFP expression was observed in solid culture. The cloning of this new promoter offers a unique genetic tool to further exploit and study the unusual properties of fungi from the Pseudozyma genus.

Insertional mutagenesis of a fungal biocontrol agent led to discovery of a rare cellobiose lipid with antifungal activity

Insertional mutagenesis was applied for the first time to a fungal biocontrol agent, Pseudozyma flocculosa, in an attempt to obtain mutants with altered antagonistic properties. Transformants were obtained via DNA-mediated transformation. Molecular analyses of the transformants revealed that multiple copies of the plasmid were integrated in tandem at one to many chromosomal loci. The transformants were screened for their biocontrol properties using standard bioassays, and the 160 tested transformants were classified into four groups: group I mutants (22 transformants) showed a stronger antagonistic effect than the wild type (WT) while those of group II (107 transformants) had a comparable antagonistic effect; group III mutants (17 transformants) had a decreased antagonistic effect relative to WT and group IV mutants (14 transformants) had lost their biocontrol properties. Culture extracts of the mutants (group IV) and WT were analyzed and compared for the presence of active metabolites which were then separated by solid-phase extraction and purified using conventional methods. Nuclear magnetic resonance experiments and analytical studies on a metabolite specifically produced by the WT revealed the presence of 2-(2',4'-diacetoxy-5'-carboxy-pentanoyl) octadecyl cellobioside (flocculosin), a novel glycolipid with strong antifungal properties; the production of this compound would account for the biocontrol activity of P. flocculosa.

Mechanisms and means of detection of biocontrol activity of Pseudozyma yeasts against plant-pathogenic fungi

Fungi belonging to Pseudozyma spp. represent a small group of yeasts that have drawn limited interest in the scientific literature. However, new research with one species of Pseudozyma, Pseudozyma flocculosa, has demonstrated the potential of this yeast as a biocontrol agent of plant-pathogenic fungi. Based on recent work, it appears that P. flocculosa, a natural inhabitant of the phyllosphere, possesses unique means of defending its ecological niche by producing unusual extracellular fatty acids that are detrimental to, among other fungi, powdery mildews, an important group of plant pathogens. Results from these studies have shown that the fatty acids naturally insert themselves into powdery mildew fungi and cause disorganization of cellular membranes and cell disintegration. Further work with insertional mutagenesis yielded mutants of P. flocculosa that represent valuable biological tools to better understand the properties of the yeast. For instance, preliminary work with mutants having lost their antagonistic properties has led to the isolation of a new metabolite with antifungal activity. Discoveries pertaining to the ecology and mode of action of P. flocculosa may lead to the study of unique metabolic or biological processes in other Pseudozyma spp. that could well release the untapped potential of these misunderstood yeasts.