Early peri-implant endosseous healing of two implant surfaces placed in surgically created circumferential defects. A histomorphometric and fluorescence study in dogs

Development and evaluation of an injectable ChitHCl-MgSO4-DDA hydrogel for bone regeneration: In vitro and in vivo studies on cell migration and osteogenesis enhancement

Nonunion and delayed union of the bone are situations in orthopedic surgery that can occur even if the bone alignment is correct and there is sufficient mechanical stability. Surgeons usually apply artificial bone grafts in bone fracture gaps or in bone defect sites for osteogenesis to improve bone healing; however, these bone graft materials have no osteoinductive or osteogenic properties, and fit the morphology of the fracture gap with difficulty. In this study, we developed an injectable chitosan-based hydrogel with MgSO4 and dextran oxidative, with the purpose to improve bone healing through introducing an engineered chitosan-based hydrogel. The developed hydrogel can gelate and fit with any morphology or shape, has good biocompatibility, can enhance the cell-migration capacity, and can improve extracellular calcium deposition. Moreover, the amount of new bone formed by injecting the hydrogel in the bone tunnel was assessed by an in vivo test. We believe this injectable chitosan-based hydrogel has great potential for application in the orthopedic field to improve fracture gap healing.

Nanotechnology for Dentistry: Prospects and Applications

In the XXI century, application of nanostructures in oral medicine has become common. In oral medicine, using nanostructures for the treatment of dental caries constitutes a great challenge. There are extensive studies on the implementation of nanomaterials to dental composites in order to improve their properties, e.g., their adhesive strength. Moreover, nanostructures are helpful in dental implant applications as well as in maxillofacial surgery for accelerated healing, promoting osseointegration, and others. Dental personal care products are an important part of oral medicine where nanomaterials are increasingly used, e.g., toothpaste for hypersensitivity. Nowadays, nanoparticles such as macrocycles are used in different formulations for early cancer diagnosis in the oral area. Cancer of the oral cavity-human squamous carcinoma-is the sixth leading cause of death. Detection in the early stage offers the best chance at total cure. Along with diagnosis, macrocycles are used for photodynamic mechanism-based treatments, which possess many advantages, such as protecting healthy tissues and producing good cosmetic results. Application of nanostructures in medicine carries potential risks, like long-term influence of toxicity on body, which need to be studied further. The introduction and development of nanotechnologies and nanomaterials are no longer part of a hypothetical future, but an increasingly important element of today's medicine.

Impact of bone-implant gap size on the interfacial osseointegration: an in vivo study

BACKGROUND

The bone-implant gap resulted from morphological mismatch between cervical bony endplates and implant footprint may have adverse impact on bone-implant interfacial osseointegration of cervical disc arthroplasty (CDA). The purpose of the study was to evaluate the impact of bone-implant gap size on the interfacial osseointegration in a rabbit animal model.

METHODS

A series of round-plate implants with different teeth depth (0.5 mm, 1.0 mm, 1.5 mm and 2.0 mm) was specifically designed. A total of 48 New Zealand white rabbits were randomly categorized into four groups by the implants they received (0.5 mm: group A, 1.0 mm: group B, 1.5 mm: group C, 2.0 mm: group D). At 4^th and 12^th week after surgery, animals were sacrificed. Micro-CT, acid fuchsin and methylene blue staining and hematoxylin and eosin (HE) staining were conducted.

RESULTS

At 4^th week and 12^th week after surgery, both micro-CT and HE staining showed more new bone formation and larger bone coverage in group A and group B than that in group C and group D. At 12^th week, the bone biometric parameters were significantly superior in group C when compared with group D (p < 0.05). At 12^th week, hard tissue slicing demonstrated larger portion of direct contact of new bone to the HA coating in group A and group B.

CONCLUSIONS

Bone-implant gap size larger than 1.0 mm negatively affected bone-implant osseointegration between compact bone and HA coated implant surface.

Micro/nanostructured calcium phytate coating on titanium fabricated by chemical conversion deposition for biomedical application

A bioactive micro/nanostructured calcium phytate coating was successfully prepared on titanium surfaces by chemical conversion deposition, mainly through hydrothermal treatment of a mixed solution of phytic acid and saturated calcium hydroxide solution. Ultraviolet radiation was carried out to improve the adhesion of the coating to the titanium substrate. Pure titanium with a sandblasted/acid-etched surface was used as the control group. The topography and chemical composition of the modified surfaces were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), and static water contact angle measurement. A pull-off test was performed to measure the coating-to-substrate adhesion strength. Bovine serum albumin was used as a model to study the protein adsorption effect. Cells were cultured on titanium surfaces for 7 days in osteogenic differentiation medium, then the osteoblast compatibility in vitro were explored by alkaline phosphatase and alizarin red staining. After 1, 2, 4 and 8 wks of immediate implantation of titanium implants into the mandibles of New Zealand white rabbits, biological effects in vivo were researched by microcomputed tomography analysis and histological evaluation. The results indicated that the roughness and hydrophilicity of the modified surfaces with micro/nanostructure remarkably increased compared to those of the control group. The pull-off test showed the average adhesion strength at the coating-substrate interface to be higher than 13.56 ± 1.71 MPa. In addition, approximately 4.41 mg/L calcium ion was released from the calcium phytate micro/nano coatings to the local environment after 48 h of immersion. More importantly, the micro/nanostructure titanium substrates significantly promoted cellular differentiation in vitro and in vivo. After 8 wks, the bone implant contact ratio (BIC, %) of the modified implants was higher than that of the control group, at 94.09 ± 0.55% and 86.18 ± 1.99% (p < 0.05). Overall, this study provided new insights into the factors promoting early osseointegration of titanium alloys, which had great potential not only for dental implants but also for various other biomaterial applications.

Impact of particulate deproteinized bovine bone mineral and porous titanium granules on early stability and osseointegration of dental implants in narrow marginal circumferential bone defects

The use of two particulate bone graft substitute materials in experimental narrow marginal peri-implant bone defects was investigated with respect to early bone healing and implant stability. Porous titanium granules, oxidized white porous titanium granules (WPTG), and demineralized bovine bone mineral (DBBM) were characterized in vitro, after which the two latter materials were tested in experimental peri-implant bone defects in six minipigs, with empty defects as control. After mandibular premolar extraction, the top 5mm of the alveoli were widened to 6mm in diameter, followed by the placement of six implants, three on each side, in each pig. Six weeks of healing was allowed. The WPTG showed better mechanical properties. No significant differences in resonance frequency analysis were found directly after compacting or healing, and similar quantities of defect bone formation were observed on micro-computed tomography for all groups. Histomorphometric analysis demonstrated a more coronal bone-to-implant contact in the DBBM group, which also displayed more defect bone fill as compared to the WPTG group. The better mechanical properties observed for WPTG appear of negligible relevance for the early stability and osseointegration of implants.

Effect of Platform Shift on Crestal Bone Levels and Mucosal Profile Following Flap Surgery and Subcrestal Implant Placement in Presence/Absence of Gap Defects

BACKGROUND

Physiologic remodeling resulting in crestal bone loss appears a common corollary to dental implant surgery. Several hypotheses and clinical strategies have been advanced to explain and avert crestal remodeling; however, causative mechanisms remain unclear and the efficacy of clinical protocols uncertain.

PURPOSE

The objective of the present study was to provide a histologic account of crestal bone levels and mucosal profile at implant sites receiving platform shift/switch and standard abutments following conventional flap surgery and subcrestal implant placement in presence or absence of crestal gap defects using a dog model.

MATERIALS AND METHODS

Four dental implants were placed into the left/right edentulated posterior mandible in five adult male Hound Labrador mongrel dogs using flap surgery including subcrestal placement with/without a 1 × 5 mm (width × depth) gap defect, and using platform shift/switch and standard abutments. Block biopsies were collected for histological/histometric analysis following an 8-week healing interval.

RESULTS

No significant differences in crestal resorption were observed among experimental groups; crestal resorption being significantly more advanced at buccal than at lingual sites (p < .001). Similarly, crestal bone-implant contact was not significantly different among groups; crestal bone-implant contact being consistently below the implant platform at buccal sites (p < .01). Moreover, the peri-implant mucosal profile was not statistically different among groups, the mucosal height being significantly greater at buccal than at lingual sites (p < .001). Also, no significant differences among groups were observed for the apical extension of the epithelial attachment, the epithelial attachment being arrested more than 2 mm above the implant platform at both platform shift/switch and standard abutments.

CONCLUSIONS

Using a clinical strategy including flap surgery and subcrestal implant placement, implant technology comparing platform shift/switch with standard abutments, surgical approach, and abutment selection seems to have a limited impact on crestal remodeling, associated bone loss, and mucosal profile.

Bone Formation in a Local Defect around Dental Implants Coated with Extracellular Matrix Components

PURPOSE

The coating of implant surfaces with components of the extracellular matrix offers an approach to influence peri-implant bone healing. In this study, bone healing around coated implants is analyzed in a peri-implant defect model.

MATERIALS AND METHODS

Eight months after extraction of the premolar teeth, six dogs received 48 implants (eight per animal) in the mandible. Implant surfaces were sandblasted and acid-etched, and some were additionally coated with collagen type II and chondroitin sulfate (collagen/CS). On each side of the mandible, implants either had no peri-implant defect (control side) or a vertical defect of 5 mm in depth and 0.5, 1.0, or 2.0 mm in width. Implants healed submerged for 8 weeks. Fluorochrome staining, histology, and histomorphometry were used to analyze implant osseointegration.

RESULTS

Fluorochrome labels showed an increased mineralization around collagen/CS-coated surfaces at 4 weeks (p = .031). Histomorphometry generally showed lower vertical and horizontal bone apposition with increasing gap size for both surface types. In gapless sites and 0.5-mm gaps, collagen/CS coated implants showed increased bone volume in areas directly adjacent to the implant, in comparison with uncoated implants (p < .05).

CONCLUSION

The width of the peri-implant gap influences peri-implant bone formation. Complete filling of all gaps by newly formed bone could not be observed around either surface. In proximity to the surface, implant surface coating by collagen/CS positively influenced bone formation.