Application of modified packaging and nano ZnO for extending the shelf life of fresh pistachio

Mechanical properties, sustained release, and oxygen scavenging properties of nanocomposite films loaded with bimetallic nanoparticles (Fe2O3/TiO2) in extra virgin olive oil

The aim of this study was the synthesis of bimetallic nanoparticles based on Fe2O3/TiO2 and its use in the poly(lactic acid) (PLA) films as an oxygen scavenger in extra virgin olive oil (EVOO) packaging. Bimetallic nanocomposites were prepared by two different precipitation methods (precipitation with ammonia and sodium hydroxide). The characteristics of bimetallic nanoparticles precipitated with sodium hydroxide (Na-Ti0.01Fe0.048O0.08) and bimetallic nanoparticles precipitated with ammonia (NH-Ti0.01Fe0.022O0.09) were compared. Relative amounts of elements in bimetallic nanocomposites and their morphological characteristics were determined using field emission scanning electron microscopy coupled with energy-dispersive X-ray spectrometer. Porosity volume and surface area of bimetallic nanoparticles were calculated using adsorption-desorption isotherms and the Brunauer-Emmett-Teller method. The formation/characterization of bimetallic nanoparticles and their location in the matrix of PLA-based nanocomposite film was studied using X-ray diffraction and Fourier transform infrared. In nanocomposite films based on PLA, bimetallic nanoparticles lead to better oxidative stability (peroxide value, p-anisidine index, K232, and K270) of the EVOO and oxygen scavenging during storage compared to free nanoparticles. Mechanical properties of nanocomposite films were improved due to bimetallic nanoparticles, which were better for Na-Ti0.01Fe0.048O0.08. In vitro release modeling of the bimetallic nanoparticles in EVOO proved that Fickian diffusion is the dominant mechanism, and the Peleg model was the best description of the release behavior of nanoparticles.

Biogenic nanoparticles from waste fruit peels: Synthesis, applications, challenges and future perspectives

Nanotechnology is a continually growing field with a wide range of applications from food science to biotechnology and nanobiotechnology. As the current world is grappling with non-biodegradable waste, considered more challenging and expensive to dispose of than biodegradable waste, new technologies are needed today more than ever. Modern technologies, especially nanotechnology, can transform biodegradable waste into products for human use. Researchers are exploring sustainable pathways for nanotechnology by utilizing biodegradable waste as a source for preparing nanomaterials. Over the past ten years, the biogenic production of metallic nanoparticles (NPs) has become a promising alternative technique to traditional NPs synthesis due to its simplicity, eco-friendliness, and biocompatibility in nature. Fruit and vegetable waste (after industrial processing) contain various bioactives (such as flavonoids, phenols, tannins, steroids, triterpenoids, glycosides, anthocyanins, carotenoids, ellagitannins, vitamin C, and essential oils) serving as reducing and capping agents for NP synthesis and they possess antibacterial, antioxidant, and anti-inflammatory properties. This review addresses various sources of biogenic NPs including their synthesis using fruit/vegetable waste, types of biogenic NPs, extraction processes and extracted biomaterials, the pharmacological functionality of NPs, industrial aspects, and future perspectives. In this manner, this review will cover the most recent research on the biogenic synthesis of NPs from fruit/vegetable peels to transform them into therapeutic nanomedicines.

Synthesis of spirulina loaded chitosan nanoparticles from prawn, Macrobrachium nipponense shell for extending the shelf life of pike-perch (Sander lucioperca) fillet during refrigerated storage

BACKGROUND

This study was aimed to synthesize polymeric chitosan nanoparticles (CSNPs) from Macrobrachium nipponense shells using sodium triphosphate (TPP) as a crosslinker that was incorporated with spirulina extract (SPE) to improve the shelf life of pike-perch during refrigerated storage (4 °C).

RESULTS

The encapsulation efficiency (EE) of SPE-loaded CSNPs decreased from 67% to 32%, and loading capacity (LC) was increased (10-14%) depending on their loaded SPE concentrations. The initial burst effect, followed by a slow-release at pH 7 (24 h), was observed. Free SPE and SPE incorporated CSNPs decreased microbial counts (total viable count, total psychotropic count, pseudomonas, and lactic acid bacteria) compared to control and unloaded CSNPs. Samples treated with free SPE or SPE-loaded CSNPs showed higher changes in odor, color, TVB-N (total volatile basic nitrogen), and TBA (thiobarbituric acid) compared with the unloaded CSNPs batch (P ≤ 0.05) until the tenth day of storage. However, fish fillets coated with SPE-loaded CSNPs had the highest overall consumer acceptability and the lowest values for TVB-N and TBA at the end of storage (14^th  day). Controlled release of bioactive compounds in batches treated with SPE-CSNPs could delay the microbial degradation and enhance chemical reactions (TBA and TVB-N) in comparison to pure SPE during storage time.

CONCLUSION

The incorporation of SPE in polymeric CSNPs can be considered as a promising material for controlled delivery of natural bioactive agents, and preservation of Pike perch quality during refrigerator storage. © 2022 Society of Chemical Industry.

Fabrication and characterization of tea polyphenol W/O microemulsion‐based bioactive edible film for sustained release in fish floss preservation

A coated nanoemulsion (CNE)‐based edible film was fabricated on the surface of fish floss (FF) to extend its shelf life during storage. The antioxidant tea polyphenol (TPP) was embedded into W/O microemulsion, which was further encapsulated into multiple emulsion (Multi‐E) together with functional soluble dietary fiber (SDF). The physicochemical properties indicated that the nanoemulsion‐based edible film (NEF) improved the morphology of FF and reduced the crystallinity of the film by scanning electron microscopy (SEM) and X‐ray diffraction (XRD). The water vapor permeability increased gradually and rose to only 0.99% after 5 h, resulting in the water activity of FF at a low level (≤0.51) during the storage period. The TPP inside was released at a constant rate (≤18.10%) on the surface, and such a rate was accelerated in the simulated gastrointestinal environment, especially in intestine reaching 60.12% after 5 h of digestion. Besides, the effect of NEF on the flavor was also evaluated and the contents of ketones, phenols, and pyrazines increased, which displayed a regulating effect on the overall flavor of FF by blocking the external moisture and suppressing the microorganism activity. In summary, the NEF effectively enhanced the flavor and taste of FF, controlled the release of TPP, and reduced the water activity during the storage, thereby extending the shelf life.

Synergistic Effect of Methyl Cellulose and Carvacrol Coating on Physicochemical and Microbial Attributes of Mango (Mangifera indica) Fruit in Postharvest Storage

Decay on mango (Mangifera indica) fruit mostly derived from a fungal disease which was caused by anthracnose invasion and infestation. The falling quality of mango fruit during postharvest preservation was commonly associated with weight loss, softening, vitamin C degradation and decay. This research evaluated the synergistic effect of methyl cellulose (MC) and carvacrol (Car) in the preparation of the edible coating on the physicochemical and microbial characteristics of mango fruit during 28 days of storage at 18°C. Five groups of coating treatments were prepared as follows: A (4% MC), B (4% MC + 0.5% Car), C (4% MC + 0.75% Car), D (4% MC + 1.0% Car), E (4% MC + 1.25% Car). These coating solutions were set 40°C for mango dipping. Mango fruits were individually dipped in the respected MC-Car solutions for 15 s and left out to air-condition for 30 min to create the coating film. These mango fruits were then kept at 18°C for 28 days. In 7 day-interval, experimental fruits were sampled to estimate weight loss, firmness, ascorbic acid content, decay index. Mango fruit pre-coated by 4% MC + 1.0% Car showed the least weight loss (1.61±0.03 %) and decay index (2.19±0.03 mark) while the highest retention of firmness (47.13±0.23 N) and ascorbic acid (25.60±0.13 mg/100 g) at the end of 28 days of storage. Results showed that incorporation of 1.0% carvacrol into 4% methyl cellulose-based edible coating would extend the shelf-life of mango fruit for 28 days of preservation. The edible coating would be a promising and green alternative with minimal environmental pollution.

Migration of Various Nanoparticles into Food Samples: A Review

Nanotechnology has provided new opportunities for the food industry with its applications in food packaging. The addition of nanoparticles, such as clay, silver and copper, can improve the mechanical and antimicrobial properties of food packaging. However, nanoparticles may have an adverse impact on human health. This has led to legislative and regulatory concerns. The inhibitory effects of nano packaging on different microorganisms, such as Salmonella, E. coli, and molds, have been studied. Nanoparticles, like other materials, may have a diverse set of properties that need to be determined. In this review, different features of silver, clay and copper nanoparticles, such as their anti-microbial, cell toxicity, genetic toxicity, mechanical properties, and migration, are critically evaluated in the case of food packaging. Specifically, the viewpoints of WHO, FDA, and ESFA, concerning the nano-silver application in food packaging, are discussed as well.

Aflatoxin, microbial contamination, sensory attributes, and morphological analysis of pistachio nut coated with methylcellulose

Pistachio is a nut with high consumption that could be affected by aflatoxin contamination, which affects the consumption market; therefore, broad studies seem to be necessary for this area. In the current study, pistachio nuts (Abbasali variety) were coated with different concentrations (0.1%, 0.5%, 1%, and 2%) of methylcellulose (MC) by immersion method and then stored in the incubator (25°C) for four months. The inhibitory effect of hydrocolloid coating on microbial (mold, yeast, and total count) and aflatoxin (B1, B2, G1, G2, and total aflatoxin) contamination, as well as sensory attributes (flavor, color, crispiness, aroma, and total acceptability), was investigated during storage periods. Results showed that the storage period had a significant effect on yeast, mold, and total count. HPLC analysis results showed that coating with MC had a significant inhibitory effect on aflatoxin contamination, and the highest amount of aflatoxin contamination was related to the control sample (3.5%). All samples except sample coated with MC 0.5% had appropriate total acceptability. Regarding the inhibitory effect of MC edible coating on aflatoxin contamination, its application on pistachio nut could be a promising approach to control the fungus infection and reduce aflatoxin production in coated pistachio.

The effects of methylcellulose coating containing carvacrol or menthol on the physicochemical, mechanical, and antimicrobial activity of polyethylene films

In this study, the physicochemical, mechanical, and antimicrobial activities of polyethylene (PE) films coated with peppermint (Menthol) and Origanum vulgare (Carvacrol) essential oil were evaluated. For this reason, PE films were coated with MC-HPMC solution containing different concentrations of menthol and carvacrol (0, 1, 1.5, and 2%), and mechanical, electromagnetic, barrier, and antimicrobial properties of all prepared films were examined. The obtained results demonstrated that by increasing the concentration of menthol and carvacrol in film coatings, tensile strength (from 36 to 23 MPa), water vapor permeability (from 12 to 11 g.m-1s-1Pa-1), and L* and b* indexes were decreased, while the oxygen permeability (OP) and elongation at break significantly were increased (p < .05). Increment of menthol and carvacrol concentration in PE film coating leads to an increase in the antimicrobial activity of films against Escherichia coli, Staphylococcus aureus, Listeria innocua, and Saccharomyces cervicea. Finally, the results obtained from this study demonstrated that PE film coated with high levels of carvacrol and menthol could be used as active antimicrobial packaging in the food packaging industry.

Investigating the properties of PLA-nanochitosan composite films containing Ziziphora Clinopodioides essential oil and their impacts on oxidative spoilage of Oncorhynchus mykiss fillets

The present study aimed to investigate the impact of polylactic acid (PLA) integrated with nanochitosan (NC) composite film and Ziziphora Clinopodioides essential oil (ZCEO) on oxidative spoilage of rainbow trout fillets during a 9-day refrigeration period. For this purpose, first, six degradable films including T1: PLA, T2: PLA + NC, T3: PLA + NC + 1% ZCEO, T4: PLA + NC + 1.5% ZCEO, T5: PLA + 1% ZCEO, and T6: PLA + 1.5% ZCEO were prepared. Next, the properties of the films were investigated. The results of the mechanical tests showed that ZCEO decreased the tensile strength and increased the elongation at the break of the PLA films. However, adding NC improved the mechanical characteristics of the PLA film. The outcomes of physical tests including moisture content (14.02%), solubility (17.41%), water vapor permeability (1.14 × 10-7 g s-1 m-1 Pa-1), and oxygen transmission rate (21.54 cm3.mm/m2.24 hr) showed that adding 1% ZCEO improved the film physical characteristics. Nevertheless, by adding 1.5% concentration EO to the PLA film, the values of water vapor permeability, porosity (according to the scanning electron microscopy), and turbidity increased and cross-sectional pores were observed. Moreover, the films had high antioxidant properties (84.33%). In the next step, the effects of the mentioned films on the oxidative spoilage of rainbow trout fillets were investigated. The results of the chemical analysis in PLA film with the EO compared with the control treatment revealed the increasing trend of oxidation indices, in general. Moreover, increasing the concentration yielded better results such that all treatments containing EO showed satisfactory results up until the storage period ends. In most cases, adding NC affected the mentioned characteristics positively, and the best results were observed in T4 and then in T3. However, based on economics and the better mechanical and physical properties of T3, the film can be applied as an active packaging in fishery products.