Characterization and application of red pitaya ( Hylocereus polyrhizus) peel powder as a fat replacer in ice cream

Effect of gamma radiation on freeze-dried red pitaya (Hylocereus costaricensis) skin powder: An EPR study to assess the original dose

The integral use of some fruits is an alternative for sustainable production from an environmental, social, and economic point of view, so activities that promote the sustainability of the food production chain, such as fruits waste irradiation, are being carried out. For control and safety purposes with irradiated products, it is necessary to use precise and adequate techniques that allow the marking and unequivocal identification of these products. Among these techniques, electron paramagnetic resonance (EPR) spectroscopy has stood out for its high sensitivity in detecting paramagnetic species generated during irradiation. The pitaya fruit has as its processing residue its skin, which represents 33 % of its total weight. In addition, studies carried out with pitaya reveal the presence of bioactive compounds, including phenolic compounds, that contribute to its antioxidant capacity. With this perspective, in the present work, we investigated the paramagnetic centers induced by gamma irradiation in powdered red pitaya skin products by means of the EPR technique, with the purpose of using them as indicators and/or dosimetric material for the determination of the absorbed dose in irradiated pitaya skin products. EPR experiments indicate the presence of at least three paramagnetic species. One of the centers (center I) exhibits six hyperfine lines with g = 2.0050 and is attributed to the Mn2+ ion. Center II has contributions from at least two radicals, and the dominant radical displays hyperfine interaction with one α-type and two nearly equivalent β-type protons with g = 2.0042. Center III has g = 2.0029 and results from the cellulosic part of the pitaya fruit. The intensity of centers II and III increases linearly with increasing gamma irradiation doses in the dose range from 500 Gy to 30 kGy. In addition, the fading results with storage time at room temperature of centers II and III show a 20 % decay in the first 21 days and then stabilize. Also, complementary studies of the morphology and degree of crystallinity of the pitaya skin powder were carried out by scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively.

Preparation and Characteristics of Ball-Milled Blueberry Peel Particles and Their Application in Ice Cream

Ice cream is popular but contains high amounts of saturated fats and few health-promoting ingredients. In the presence of xanthan gum (0.25%), blueberry peel particles prepared through ball-milling treatment (BMPs) were used to prepare ice cream containing camellia oil as a fat replacer. The BMPs possessed smaller particle sizes, larger contact angles, and higher contents of anthocyanin aglycone compared with commonly milled blueberry peel particles. BMPs with the largest contact angle (66.30°) were obtained by ball-milling the blueberry peel at 15 Hz for 6 h (BMP15Hz6h). The ice cream mixes were depicted as linear viscoelastic gel-like solids, and their apparent viscosity, G' and G', increased with the increase in the BMP15Hz6h concentration. Ice cream with strong antioxidant activity and good freeze-thaw stability was acceptable and desirable in the presence of 0.5% BMP15Hz6h.

Designing novel ice creams using nut oil emulsion gels based on blueberry pectin and CaCl2 as fat replacers: Insights from physicochemical and sensory properties

This study aimed to utilize blueberry pectin and calcium chloride to design a gel network structure for loading nut oils (peanut and walnut oil, respectively). The optimization of emulsion gel preparation was conducted through orthogonal experiments, utilizing the oil-holding ratio and gel strength as critical indicators. The emulsion gel was applied to the ice cream production. It was revealed that the peroxide value of the nut oil emulsion gels was significantly lower than that of nut oils. Both nut oil emulsion gel ice creams exhibited higher expansion rates, lower melting rates, and decreased hardness than the nut oil ice creams. Notably, walnut oil emulsion gel ice cream demonstrated a melting rate similar to traditional butter-based ice cream. Emulsion gel ice cream has higher fat globule instability and viscosity. Overall, the comprehensive emulsion gel ice cream indicators were comparable to conventional butter ice cream and notably superior to peanut and walnut oil ice cream. Using emulsion gel as a fat substitute in ice cream was feasible. The implications of these results were significant for advancing the utilization of nut oil emulsion gel within the ice cream industry.

A review on the hydration properties of dietary fibers derived from food waste and their interactions with other ingredients: opportunities and challenges for their application in the food industry

Dietary fiber (DF) significantly affects the quality attributes of food matrices. Depending on its chemical composition, molecular structure, and degree of hydration, the behavior of DF may differ. Numerous reports confirm that incorporating DF derived from food waste into food products has significant effects on textural, sensory, rheological, and antimicrobial properties. Additionally, the characteristics of DF, modification techniques (chemical, enzymatic, mechanical, thermal), and processing conditions (temperature, pH, ionic strength), as well as the presence of other components, can profoundly affect the functionalities of DF. This review aims to describe the interactions between DF and water, focusing on the effects of free water, freezing-bound water, and unfreezing-bound water on the hydration capacity of both soluble and insoluble DF. The review also explores how the structural, functional, and environmental properties of DF contribute to its hydration capacity. It becomes evident that the interactions between DF and water, and their effects on the rheological properties of food matrices, are complex and multifaceted subjects, offering both opportunities and challenges for further exploration. Utilizing DF extracted from food waste exhibits promise as a sustainable and viable strategy for the food industry to create nutritious and high-value-added products, while concurrently reducing reliance on primary virgin resources.

Valorization of dragon fruit waste to value-added bioproducts and formulations: A review

Owing to the increasing worldwide population explosion, managing waste generated from the food sector has become a cross-cutting issue globally, leading to environmental, economic, and social issues. Circular economy-inspired waste valorization approaches have been increasing steadily, generating new business opportunities developing valuable bioproducts using food waste, especially fruit wastes, that may have several applications in energy-food-pharma sectors. Dragon fruit waste is one such waste resource, which is rich in several value-added chemicals and oils, and can be a renewable resource to produce several value-added compounds of potential applications in different industries. Pretreatment and extraction processes in biorefineries are important strategies for recovering value-added biomolecules. There are different methods of valorization, including green extractions and biological conversion approaches. However, microbe-based conversion is one of the advanced technologies for valorizing dragon fruit waste into bioethanol, bioactive products, pharmaceuticals, and other valued products by reusing or recycling them. This state-of-the-art review briefly overviews the dragon fruit waste management strategies and advanced eco-friendly and cost-effective valorization technologies. Furthermore, various applications of different valuable bioactive components obtained from dragon fruit waste have been critically discussed concerning various industrial sectors. Several industrial sectors, such as food, pharmaceuticals, and biofuels, have been critically reviewed in detail.

Pitahaya (Hylocereus ocamponis)-Peel and -Flesh Flour Obtained from Fruit Co-Products-Assessment of Chemical, Techno-Functional and In Vitro Antioxidant Properties

The aim of this work was to assess the chemical composition and physico-chemical, techno-functional, and in vitro antioxidant properties of flours obtained from the peel and flesh of pitahaya (Hylocereus ocamponis) to determine their potential for use as ingredients for food enrichment. The chemical composition, including total betalains, mineral content, and polyphenolic profile, was determined. The techno-functional properties (water holding, oil holding, and swelling capacities) were also evaluated. For the antioxidant capacity, four different methodologies, namely ferrous ion-chelating ability assay, ferric-reducing antioxidant power assay; 1,1-Diphenyl-2-picrylhydrazyl radical scavenging ability assay, and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radical assay, were used. Pitahaya-peel flour had higher values for protein (6.72 g/100 g), ash (11.63 g/100 g), and dietary fiber 56.56 g/100 g) than pitahaya-flesh flour, with values of 6.06, 3.63, and 8.22 g/100 g for protein, ash, and dietary fiber, respectively. In the same way, pitahaya peel showed a higher content of minerals, betalains, and polyphenolic compounds than pitahaya-flesh flour, with potassium (4.43 g/100 g), catechin (25.85 mg/g), quercetin-3-rhamnoside (11.66 mg/g) and myricetrin (12.10 mg/g) as principal compounds found in the peel. Again, pitahaya-peel flour showed better techno-functional and antioxidant properties than pitahaya-flesh flour. The results obtained suggest that the flours obtained from the peel and pulp of pitahaya (H. ocamponis) constitute a potential material to be utilized as an ingredient in the food industry due to the high content of bioactive compounds such as betalains, phenolic acids, and flavonoids, with notable antioxidant capacity.

Passion fruit by-products (Passiflora edulis f. flavicarpa) as a potential fat replacer in ice cream

In recent years, people have become interested in consuming low-fat foods as this reduces the risk of obesity and cardiovascular disease. For this reason, this study optimized the incorporation of passion fruit epicarp (PFE) as a partial fat substitute in dairy ice cream. For this purpose, a central composite rotational design 22 was performed and 5 response variables were optimized, of which 4 variables were maximized (percentage overrun, hardness, adhesiveness, and color coordinates L*, a*, b*), while the melting rate was minimized as a function of two factors (% PFE and % fat). The stability of three types of ice cream was then evaluated: experimental ice cream (3% milk fat and 0.97% PFE), commercial ice cream (4% milk fat and 2% vegetable fat) and control ice cream (3% milk fat without PFE added), according to their physicochemical and sensory properties during 57 days of storage (-22 °C, 85% relative humidity). The results showed that it was possible to reduce the milk fat by up to 25% by adding PFE (0.97%), which significantly reduced the melting rate and resulted in higher hardness (N), adhesiveness and increased yellowness compared to the commercial samples. The optical microscopy analysis also showed that PFE keeps the air bubbles immobile due to the increased viscosity in the serum phase during the 57-day storage.

Basella alba L. (Malabar Spinach) as an Abundant Source of Betacyanins: Identification, Stability, and Bioactivity Studies on Natural and Processed Fruit Pigments

The antioxidant and anti-inflammatory activities of acylated and decarboxylated gomphrenins, as well as Basella alba L. fruit extract, were investigated in relation to gomphrenin, known for its high biological potential. The most abundant natural acylated gomphrenins, namely, 6'-O-E-caffeoyl-gomphrenin (malabarin) and 6'-O-E-4-coumaroyl-gomphrenin (globosin), were isolated from B. alba extract for the studies. In addition, controlled thermal decarboxylation of gomphrenin in the purified B. alba extract at 65-75 °C resulted in the formation of the most prevalent decarboxylated products, including 17-decarboxy-gomphrenin and 2,17-bidecarboxy-gomphrenin, along with their isoforms. The structures of the decarboxylated pigments were confirmed by NMR analyses. Exploring the matrix effect on pigment reactivity revealed a tremendous increase in the stability of all betacyanins after the initial stage of extract purification using a cation exchanger under various conditions. This indicates the removal of a substantial portion of the unfavorable matrix from the extract, which presumably contains reactive species that could otherwise degrade the pigments. Furthermore, the high concentration of citrates played a significant role in favoring the formation of 2-decarboxy-gomphrenin to a considerable extent. In vitro screening experiments revealed that the tested compounds demonstrated strong anti-inflammatory properties in lipopolysaccharide (LPS)-activated human macrophages. This effect encompassed the selective inhibition of cytokine and chemokine release from activated macrophages, modulation of the chemotactic activity of immune cells, and the regulation of tissue remodeling mediators' release.

Red Dragon Fruit Peels: Effect of Two Species Ratio and Particle Size on Fibre Quality and Its Application in Reduced-Fat Alpaca-Based Sausages

This research aimed to assess the influence of red dragon fruit peels ratio (RDF-PR) from two species, Hylocereus hybridum (HH) and Hylocereus undatus (HU), and particle size (PS) on quality parameters of red dragon fruit peel powder (RDF-PP) and its further application in emulsified alpaca-based sausages as partial substitutes of pork-back fat. A three-level full factorial design (nine treatments) was employed to evaluate the effect of RDF-PR (HH(0%):HU(100%), HH(50%):HU(50%), and HH(100%):HU(0%)) and PS (499-297, 296-177, and <177 µm) on the dependent variables: L*, a*, b*, C, h°, water-holding capacity, oil-holding capacity, swelling capacity, pectin yield, degree of esterification (analysed through FT-IR), and crude fibre content. The data analysed through a response surface methodology showed that treatment one (T1) is the best with the optimised conditions at 100% HU RDF-PR and PS of <177 µm. The statistical validation of T1 exhibited the highest water-holding capacity (32.1 g/g peel), oil-holding capacity (2.20 g oil/g peel), and pectin yield (27.1%). A completely randomised design (four formulations) was then used to assess the effect of partial replacement of pork-back fat by T1 in emulsified alpaca-based sausages on the colourimetric, physicochemical, and texture properties (hardness, chewiness, cohesiveness, springiness, adhesiveness, and adhesive force). Likewise, a sensory hedonic scale was employed to evaluate the appearance, colour, odour, flavour, texture, and overall acceptability of sausages. The results revealed that 65.7% of pork-back fat content was successfully replaced compared with a control formulation. Additionally, F3 showed significantly (p < 0.05) better colourimetric, physicochemical, and textural characteristics, such as lower hardness (34.8 N) and chewiness (21.7 N) and higher redness (a* = 19.3) and C (22.9), compared to a control formulation. This research presents RDF-PP as a promising fat substitute for developing healthier, reduced-fat meat products using fibre-rich agroindustry by-products.

Sustainable valorization of pitaya (Hylocereus spp.) peel in a semi-continuous high-pressure hydrothermal process to recover value-added products

This study evaluated the use of a semi-continuous high-pressure hydrothermal process for the recovery of value-added products from pitaya peel. The process was carried out at 15 MPa, a water flow rate of 2 mL/min, a solvent-to-feed ratio of 60 g water/g pitaya peel, and temperatures ranging from 40 to 210 °C. The results show that extraction temperatures (between 40 and 80 °C) promoted the recovery of betacyanin (1.52 mg/g), malic acid (25.6 mg/g), and citric acid (25.98 mg/g). The major phenolic compounds obtained were p-coumaric acid (144.63 ± 0.42 µg/g), protocatechuic acid (91.43 ± 0.32 µg/g), and piperonylic acid (74.2 ± 0.31 µg/g). The hydrolysis temperatures (between 150 and 210 °C) could produce sugars (18.09 mg/g). However, the hydrolysis process at temperatures above 180 °C generated Maillard reaction products, which increased the total phenolic compounds and antioxidant activity of the hydrolysates. Finally, the use of semi-continuous high-pressure hydrothermal process can be a sustainable and promising approach for the recovery of value-added compounds from pitaya peel, advocating a circular economy approach in the agri-food industry.

Applications and safety aspects of bioactives obtained from by-products/wastes

Due to the negative impacts of food loss and food waste on the environment, economy, and social contexts, it is a necessity to take action in order to reduce these wastes from post-harvest to distribution. In addition to waste reduction, bioactives obtained from by-products or wastes can be utilized by new end-users by considering the safety aspects. It has been reported that physical, biological, and chemical safety features of raw materials, instruments, environment, and processing methods should be assessed before and during valorization. It has also been indicated that meat by-products/wastes including collagen, gelatin, polysaccharides, proteins, amino acids, lipids, enzymes and chitosan; dairy by-products/wastes including whey products, buttermilk and ghee residue; fruit and vegetable by-products/wastes such as pomace, leaves, skins, seeds, stems, seed oils, gums, fiber, polyphenols, starch, cellulose, galactomannan, pectin; cereal by-products/wastes like vitamins, dietary fibers, fats, proteins, starch, husk, and trub have been utilized as animal feed, food supplements, edible coating, bio-based active packaging systems, emulsifiers, water binders, gelling, stabilizing, foaming or whipping agents. This chapter will explain the safety aspects of bioactives obtained from various by-products/wastes. Additionally, applications of bioactives obtained from by-products/wastes have been included in detail by emphasizing the source, form of bioactive compound as well as the effect of said bioactive compound.

Low oil Pickering emulsion gels stabilized by bacterial cellulose nanofiber/soybean protein isolate: An excellent fat replacer for ice cream

Food-grade Pickering emulsion gels with different oil phase fractions stabilized by Bacterial cellulose nanofibers/Soy protein isolate complex colloidal particles were prepared by one-step method. The properties of Pickering emulsion gels with different oil phase fractions (5 %, 10 %, 20 %, 40 %, 60 %, 75 %, v/v) and their applications in ice cream were investigated in the present study. The microstructural results showed that Pickering emulsion gels with the low oil phase fractions (5 %-20 %) were an emulsion droplet-filled gel, where the oil droplets were embedded in the network structure of cross-linked polymer, while Pickering emulsion gels with higher oil phase fractions (40 %-75 %) were an emulsion droplet-aggregated gel, which formed a network structure by flocculated oil droplets. The rheology result showed that the low oil Pickering emulsion gels had the same excellent performance as the high oil Pickering emulsion gels. Furthermore, the low oil Pickering emulsion gels showed good environmental stability under harsh conditions. Consequently, Pickering emulsion gels with 5 % oil phase fraction were used as fat replacers in ice cream and ice cream with different fat replacement rates (30 %, 60 % and 90 %, w/w) was prepared in this work. The results showed the appearance and texture of the ice cream with low oil Pickering emulsion gels as fat replacers was similar to that of the ice cream with no fat replacers, and the melting rate of the ice cream with low oil Pickering emulsion gels as fat replacers showed the lowest value of 21.08 % during the 45 min of melting experiment, as the fat replacer rate in the ice cream reached to 90 %. Therefore, this study demonstrated that low oil Pickering emulsion gels were excellent fat replacers and had great potential application in low calorie food production.

Quality Characteristics of Rice-Based Ice Creams with Different Amylose Contents

Ice cream consumption has increased over the years. In this study, we investigated the potential of using rice varieties with varying amylose contents for ice cream production. We analyzed the physical and chemical properties and sensory quality characteristics (appearance, taste, texture, chewiness, aroma, and rice flavor) of rice-based ice cream made from five varieties with low and high amylose levels. To make the ice cream, we ground rice into a fine powder and combined it with skim milk powder, butter, sugar, glycerin esters of fatty acids, locust bean gum, and water to form a gelatinized mixture. This mixture was then aged, frozen, and hardened. The ice cream’s key quality characteristics, such as viscosity (2170–25,030 cP), hardness (4.27–49.55 N cm−2), and overrun (17.95–46.99%), showed a wide range. Ice cream made from Saemimyeon (high amylose content rice variety) exhibited the highest hardness value (49.55 N cm−2) among the varieties tested, but had relatively low viscosity (4030 cP), overrun (17.95%), and drip-through (0.75 g/min) values. These findings suggest that rice varieties with different amylose contents are suitable for making ice cream and have the potential to expand the rice processing market and increase its value.

Evaluation of the Characteristics of Sheep's and Goat's Ice Cream, Produced with UF Concentrated Second Cheese Whey and Different Starter Cultures

Second cheese whey (SCW) is the by-product resulting from the manufacture of whey cheeses. In the present work, sheep (S) and goat (G) SCW concentrated by ultrafiltration (UF) were used in the production of ice creams. Concentrated liquid SCW samples with inulin added as a prebiotic were fermented with yoghurt, kefir and probiotic commercial cultures before being frozen in a horizontal frozen yoghurt freezer. The physicochemical, microbiological and sensory properties of the products were evaluated over 120 days of frozen storage. The products presented significant differences regarding these properties, specifically the higher total solids and protein contents of sheep's ice creams, which were higher compared to their goat ice cream counterparts. Sheep's ice creams also presented higher hardness and complex viscosity, which increased with storage. These ice creams also presented higher overrun and lower meltdown rates. The color parameters of the ice creams showed significant differences between formulations resulting from storage time. In all cases, Lactobacilli sp. cell counts were higher than log 6 CFU/g at the first week of storage. In the case of sheep's ice creams these values were maintained or increased until the 30th day, but decreased until the 60th day. Lactococci sp. counts surpassed log 7 CFU/g in all products, and these values were maintained until the end of storage, except in the case of G-Yoghurt and G-Kefir. Concerning the products containing probiotics, the sum of Lactococci sp. and Lactobacilli sp. counts was of the order log 8-9 CFU/g until the 60th day of storage, indicating that the probiotic characteristics of ice creams were maintained for at least 2 months. All products were well accepted by the consumer panel. Sheep's SCW ice creams were better rated regarding aroma, taste and texture. However, only the ranking test was able to differentiate preferences among formulations.

Biogenic proficient synthesis of (Au-NPs) via aqueous extract of Red Dragon Pulp and seed oil: Characterization, antioxidant, cytotoxic properties, anti-diabetic anti-inflammatory, anti-Alzheimer and their anti-proliferative potential against cancer cell lines

•

Novel Green synthesis of Au-NPs using Dragon fruit pulp and seed oil extract for the first time.

•

Use of green and safer protocol for synthesis of Au-NPs further demonstrate that we can apply green chemistry protocols to reduce environmental pollution and disposal of waste toxicants.

•

FTIR analysis confirmed the capping of therapeutically potent phytochemicals which are of great use in applied field especially medical.

•

Significant Anti-diabetic, Anti-inflammatory, Anti-Alzheimer and Cytotoxic potential of biosynthesized Au-NPs create a new idea and shifting experts to treat cancerous cell lines.

Gold nanoparticles with tiny sizes and biostability are particularly essential and are employed in a variety of biomedical applications. Using a reducing agent and a stabilising agent to make gold nanoparticles has been reported in a number of studies. Gold nanoparticles with a particle size of 25.31 nm were synthesized in this study utilising Hylocereus polyrhizus (Red Pitaya) extract, which functions as a reducing and stabilising agent. The extract of Red Pitaya is said to be a powerful antioxidant and anti-cancer agent. Because of its substantial blood biocompatibility and physiological stability, green production of gold nanoparticles with H. polyrhizus fruit extract is an alternative to chemical synthesis and useful for biological and medical applications. The formation and size distribution of gold nanoparticles were confirmed by HPLC, UV-Vis spectrophotometer, X-ray diffraction (XRD), Dynamic light scattering (DLS), Zeta potential, Transmission electron microscopy (TEM), Fourier transformed infrared spectroscopy (FTIR), Energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS). The well-analysed NPs were used in various biological assays, including anti-diabetic, anti-inflammatory, anti-Alzheimer, and antioxidant (DPPH), and cytotoxic investigations. The NPs also showed a dose-dependent cytotoxic activity against HCT-116, HepG2 and MCF-7 cell lines, with IC₅₀ of 100 µg/mL for HCT-116 cells, 155 µg/mL for HepG2, and for MCF-7 cells the value was 165 µg/mL respectively. Finally, the outstanding biocompatibility of Au-NPs has led to the conclusion that they are a promising choice for various biological applications.

Natural plant fibers obtained from agricultural residue used as an ingredient in food matrixes or packaging materials: A review

Every year, agrifood activities generate a large amount of plant byproducts, which have a low economical value. However, the valorization of these byproducts can contribute to increasing the intake of dietary fibers and reducing the environmental pollution. This review presents an overview of a wide variety of agricultural wastes applied in the formulation of different food products and sustainable packaging. In general, the incorporation of fibers into bakery, meat, and dairy products was successful, especially at a level of 10% or less. Fibers from a variety of crops improved the consistency, texture, and stability of sauce formulations without affecting sensory quality. In addition, fiber fortification (0.01-6.4%) presented considerable advantages in terms of rheology, texture, melting behavior, and fat replacement of ice cream, but in some cases had a negative impact on color and mouthfeel. In the case of beverages, promising effects on texture, viscosity, stability, and appetite control were obtained by the addition of soluble dietary fibers from grains and fruits with small particle size. Biocomposites used in packaging benefited from reinforcing effects of various plant fiber sources, but the extent of modification depended on the matrix type, fiber pretreatment, and concentration. The information synthesized in this contribution can be used as a tool to screen and select the most promising fiber source, fiber concentration, and pretreatment for specific food applications and sustainable packaging.

Maturation Process, Nutritional Profile, Bioactivities and Utilisation in Food Products of Red Pitaya Fruits: A Review

Red pitaya (Hylocereus polyrhizus, red pulp with pink peel), also known as dragon fruit, is a well-known species of pitaya fruit. Pitaya seeds and peels have been reported to exhibit higher concentrations of total polyphenols, beta-cyanins and amino acid than pulp, while anthocyanins (i.e., cyanidin 3-glucoside, delphinidin 3-glucoside and pelargonidin 3-glucoside) were only detected in the pulp extracts. Beta-cyanins, phenolics and flavonoids were found to increase gradually during fruit maturation and pigmentation appeared earlier in the pulp than peel. The phytochemicals were extracted and purified by various techniques and broadly used as natural, low-cost, and beneficial healthy compounds in foods, including bakery, wine, dairy, meat and confectionery products. These bioactive components also exhibit regulative influences on the human gut microbiota, glycaemic response, lipid accumulation, inflammation, growth of microbials and mutagenicity, but the mechanisms are yet to be understood. The objective of this study was to systematically summarise the effect of red pitaya’s maturation process on the nutritional profile and techno-functionality in a variety of food products. The findings of this review provide valuable suggestions for the red pitaya fruit processing industry, leading to novel formulations supported by molecular research.

Dietary Fiber and Prebiotic Compounds in Fruits and Vegetables Food Waste

The fruits and vegetables processing industry is one of the most relevant food by-products, displaying limited commercial exploitation entailing economic and environmental problems. However, these by-products present a considerable amount of dietary fiber and prebiotics with important biological activities, such as gut microbiota modulation, lowering the glycemic load and replacing some unhealthy ingredients with an impact on food texture. Therefore, the international scientific community has considered incorporating their extracts or powders to preserve or fortify food products an area of interest, mainly because nowadays consumers demand the production of safer and health-promoting foods. In the present review, literature, mainly from the last 5 years, is critically analyzed and presented. A particular focus is given to utilizing the extracted dietary fibers in different food products and their impact on their characteristics. Safety issues regarding fruits and vegetables wastes utilization and anti-nutritional compounds impact were also discussed.

Underutilized plants of the Cactaceae family: Nutritional aspects and technological applications

This review examines the nutritional and functional aspects of some representatives of the Cactaceae family, as well as its technological potential in the most diverse industrial fields. The studied species are good sources of nutrients and phytochemicals of biological interest, such as phenolic compounds, carotenoids, betalains, phytosterols, tocopherols, etc. They also have shown great potential in preventing some diseases, including diabetes, obesity, cancer, and others. As to technological applications, the Cactaceae family can be explored in the production of food (e.g., cakes, yogurts, bread, ice cream, and juices), as natural dyes, sources of pectins, water treatment and in animal feed. In addition, they have great potential for many technological domains, including food chemistry, pharmacy, biotechnology, and many others.

Preparation of nanofibrillated cellulose from grapefruit peel and its application as fat substitute in ice cream

Grapefruit peel nanofibrillated cellulose (GNFC) was used as fat substitute in ice cream. GNFC was characterized by TEM, SEM, and XRD. The effects of GNFC on textural profiles, rheological properties, melting resistance, sensory properties, microstructure, and gross energy (GE) of ice cream were investigated. The results showed that GNFC was short rod-shaped crystal. Ice cream added with GNFC exhibited elastic-dominated behavior and better textural properties. The sensory evaluation score reached the highest level with desirable three-dimensional network structure at 0.4 % GNFC addition. GE of ice cream significantly decreased with reducing fat with maximal reduction rate of 17.90 %. Furthermore, the results of in vitro simulated digestion showed that GNFC addition and fat reduction significantly inhibited fat digestibility of ice cream due to coalescence of fat droplets on GNFC. This study provides new sustainable perspectives for the application of GNFC prepared from agricultural waste as fat substitute in food products.

Identification and Determination of Betacyanins in Fruit Extracts of Melocactus Species

Betacyanin pigments were studied in edible fruits of four Melocactus species, M. violaceus Pfeiff., M. bahiensis (Britton & Rose) Luetzelb, M. amoenus (Hoffm.) Pfeiff., and M. curvispinus Pfeiff., by means of chromatographic and mass spectrometric techniques. The main pigment constituent, melocactin, endogenously present in the Melocactus species, was identified as betanidin 5-O-β-sophoroside betacyanin, previously known as "bougainvillein-r-I". The highest total concentration of betacyanins was found in fruits of M. amoenus (∼0.08 mg/g). Except for melocactin being the most abundant betacyanin (34.8-38.8%) in the analyzed species, a presence of its malonylated derivative, mammillarinin (15.2-19.9%), as well as more hydrophobic feruloyled and sinapoyled melocactins was confirmed by additional co-chromatographic experiments with authentic reference betacyanins. The acyl migration isomers of the malonylated betacyanins as well as a presence of 5''-O-E-sinapoyl-2'-O-apiosyl-betanin (2.3-3.0%) found frequently in light-stressed cacti was also acknowledged.