Metacarpal trabecular bone varies with distinct hand-positions used in hominid locomotion

Estimating elbow loading conditions through the motion behaviors of subchondral bone density during joint movements

Evaluating complicated stress across the elbow under joint motion remains difficult. Here, we aimed to evaluate the distribution of the subchondral bone density in the normal elbow bones and further characterize their spatial relationships during elbow motion to estimate the loading stress across the articular surface using three-dimensional computed tomography bone models. The normal elbow joint exhibited a consistent distribution pattern of subchondral bone density. High-density regions were distributed in the capitellum and posterior humeral trochlea, sagittal ridge of the ulnar trochlear notch and ulnar-volar side of the radial head. Motion analyses revealed that the high-density regions proximate with elbow flexion with forearm pronation in the radiocapitellar joint and in the fully extended position in the ulnohumeral joint. This reasonably reflects the stress acting on the joint surface under actual loading conditions. These findings suggest that daily activities involving lifting or carrying objects in these positions are stress-prone activities.

Technical note: Does scan resolution or downsampling impact the analysis of trabecular bone architecture?

The "gold standard" for the assessment of trabecular bone structure is high-resolution micro-CT. In this technical note, we test the influence of initial scan resolution and post hoc downsampling on the quantitative and qualitative analysis of trabecular bone in a Gorilla tibia. We analyzed trabecular morphology in the right distal tibia of one Gorilla gorilla individual to investigate the impact of variation in voxel size on measured trabecular variables. For each version of the micro-CT volume, trabecular bone was segmented using the medical image analysis method. Holistic morphometric analysis was then used to analyze bone volume (BV/TV), anisotropy (DA), trabecular thickness (Tb.Th), spacing (Tb.Sp), and number (Tb.N). Increasing voxel size during initial scanning was found to have a strong impact on DA and Tb.Th measures, while BV/TV, Tb.Sp, and Tb.N were found to be less sensitive to variations in initial scan resolution. All tested parameters were not substantially influenced by downsampling up to 90 μm resolution. Color maps of BV/TV and DA also retained their distribution up to 90 μm. This study is the first to examine the effect of variation in micro-CT voxel size on the analysis of trabecular bone structure using whole epiphysis approaches. Our results indicate that microstructural variables may be measured for most trabecular parameters up to a voxel size of 90 μm for both scan and downsampled resolutions. Moreover, if only BV/TV, Tb.Sp or Tb.N is measured, even larger voxel sizes might be used without substantially affecting the results.

Trabecular architecture of the distal femur in extant hominids

Extant great apes are characterized by a wide range of locomotor, postural and manipulative behaviours that each require the limbs to be used in different ways. In addition to external bone morphology, comparative investigation of trabecular bone, which (re-)models to reflect loads incurred during life, can provide novel insights into bone functional adaptation. Here, we use canonical holistic morphometric analysis (cHMA) to analyse the trabecular morphology in the distal femoral epiphysis of Homo sapiens (n = 26), Gorilla gorilla (n = 14), Pan troglodytes (n = 15) and Pongo sp. (n = 9). We test two predictions: (1) that differing locomotor behaviours will be reflected in differing trabecular architecture of the distal femur across Homo, Pan, Gorilla and Pongo; (2) that trabecular architecture will significantly differ between male and female Gorilla due to their different levels of arboreality but not between male and female Pan or Homo based on previous studies of locomotor behaviours. Results indicate that trabecular architecture differs among extant great apes based on their locomotor repertoires. The relative bone volume and degree of anisotropy patterns found reflect habitual use of extended knee postures during bipedalism in Homo, and habitual use of flexed knee posture during terrestrial and arboreal locomotion in Pan and Gorilla. Trabecular architecture in Pongo is consistent with a highly mobile knee joint that may vary in posture from extension to full flexion. Within Gorilla, trabecular architecture suggests a different loading of knee in extension/flexion between females and males, but no sex differences were found in Pan or Homo, supporting our predictions. Inter- and intra-specific variation in trabecular architecture of distal femur provides a comparative context to interpret knee postures and, in turn, locomotor behaviours in fossil hominins.

Differences in vertebral bone density between African apes

OBJECTIVES

Low-energy vertebral fractures are a common health concern, especially in elderly people. Interestingly, African apes do not seem to experience as many vertebral fractures and the low-energy ones are even rarer. One potential explanation for this difference is the lower bone density in humans. Yet, only limited research has been done on the vertebral bone density of the great apes and these have mainly included only single vertebrae. Hence the study aim is to expand our understanding of the vertebral microstructure of African apes in multiple spinal segments.

MATERIALS

Bone density in the vertebral body of C7, T12, and L3 was measured from 32 Pan troglodytes and 26 Gorilla gorilla using peripheral quantitative computed tomography (pQCT).

RESULTS

There was a clear difference between the three individual vertebrae and consequently the spinal segments in terms of trabecular density and cortical density and thickness. The variation of these bone parameters between the vertebrae differed between the apes but was also different from those reported for humans. The chimpanzees were observed to have overall higher trabecular density, but gorillas had higher cortical density and thickness. Cortical thickness had a relatively strong association with the vertebral size.

DISCUSSION

Despite the similarity in locomotion and posture, the results show slight differences in the bone parameters and their variation between spinal segments in African apes. This variation also differs from humans and appears to indicate a complex influence of locomotion, posture, and body size on the different spinal segments.

Trabecular bone variation in the gorilla calcaneus

OBJECTIVES

Calcaneal external shape differs among nonhuman primates relative to locomotion. Such relationships between whole-bone calcaneal trabecular structure and locomotion, however, have yet to be studied. Here we analyze calcaneal trabecular architecture in Gorilla gorilla gorilla, Gorilla beringei beringei, and G. b. graueri to investigate general trends and fine-grained differences among gorilla taxa relative to locomotion.

MATERIALS AND METHODS

Calcanei were micro-CT scanned. A three-dimensional geometric morphometric sliding semilandmark analysis was carried out and the final landmark configurations used to position 156 volumes of interest. Trabecular thickness (Tb.Th), trabecular spacing (Tb.Sp), and bone volume fraction (BV/TV) were calculated using the BoneJ plugin for ImageJ and MATLAB. Non-parametric MANOVAs were run to test for significant differences among taxa in parameter raw values and z-scores. Parameter distributions were visualized using color maps and summarized using principal components analysis.

RESULTS

There are no significant differences in raw BV/TV or Tb.Th among gorillas, however G. b. beringei significantly differs in z-scores for both parameters (p = <0.0271). All three taxa exhibit relatively lower BV/TV and Tb.Th in the posterior half of the calcaneus. This gradation is exacerbated in G. b. beringei. G. b. graueri significantly differs from other taxa in Tb.Sp z-scores (p < 0.001) indicating a different spacing distribution.

DISCUSSION

Relatively higher Tb.Th and BV/TV in the anterior calcaneus among gorillas likely reflects higher forces associated with body mass (transmitted through the subtalar joint) relative to forces transferred through the posterior calcaneus. The different Tb.Sp pattern in G. b. graueri may reflect proposed differences in foot positioning during locomotion.

Cortical bone architecture of hominid intermediate phalanges reveals functional signals of locomotion and manipulation

OBJECTIVES

Reconstruction of fossil hominin manual behaviors often relies on comparative analyses of extant hominid hands to understand the relationship between hand use and skeletal morphology. In this context, the intermediate phalanges remain understudied. Thus, here we investigate cortical bone morphology of the intermediate phalanges of extant hominids and compare it to the cortical structure of the proximal phalanges, to investigate the relationship between cortical bone structure and inferred loading during manual behaviors.

MATERIALS AND METHODS

Using micro-CT data, we analyze cortical bone structure of the intermediate phalangeal shaft of digits 2-5 in Pongo pygmaeus (n = 6 individuals), Gorilla gorilla (n = 22), Pan spp. (n = 23), and Homo sapiens (n = 23). The R package morphomap is used to study cortical bone distribution, cortical thickness and cross-sectional properties within and across taxa.

RESULTS

Non-human great apes generally have thick cortical bone on the palmar shaft, with Pongo only having thick cortex on the peaks of the flexor sheath ridges, while African apes have thick cortex along the entire flexor sheath ridge and proximal to the trochlea. Humans are distinct in having thicker dorsal shaft cortex as well as thick cortex at the disto-palmar region of the shaft.

DISCUSSION

Variation in cortical bone distribution and properties of the intermediate phalanges is consistent with differences in locomotor and manipulative behaviors in extant great apes. Comparisons between the intermediate and proximal phalanges reveals similar patterns of cortical bone distribution within each taxon but with potentially greater load experienced by the proximal phalanges, even in knuckle-walking African apes. This study provides a comparative context for the reconstruction of habitual hand use in fossil hominins and hominids.

Trabecular bone volume fraction in Holocene and Late Pleistocene humans

Research suggests that recent modern humans have gracile skeletons in having low trabecular bone volume fraction (BV/TV) and that gracilization of the skeleton occurred in the last 10,000 years. This has been attributed to a reduction in physical activity in the Holocene. However, there has been no thorough sampling of BV/TV in Pleistocene humans due to limited access to high resolution images of fossil specimens. Therefore, our study investigates the gracilization of BV/TV in Late Pleistocene humans and recent (Holocene) modern humans to improve our understanding of the emergence of gracility. We used microcomputed tomography to measure BV/TV in the femora, humeri and metacarpals of a sample of Late Pleistocene humans from Dolní Věstonice (Czech Republic, ∼26 ka, n = 6) and Ohalo II (Israel, ∼19 ka, n = 1), and a sample of recent humans including farming groups (n = 39) and hunter-gatherers (n = 6). We predicted that 1) Late Pleistocene humans would exhibit greater femoral and humeral head BV/TV compared with recent humans and 2) among recent humans, metacarpal head BV/TV would be greater in hunter-gatherers compared with farmers. Late Pleistocene humans had higher BV/TV compared with recent humans in both the femur and humerus, supporting our first prediction, and consistent with previous findings that Late Pleistocene humans are robust as compared to recent humans. However, among recent humans, there was no significant difference in BV/TV in the metacarpals between the two subsistence groups. The results highlight the similarity in BV/TV in the hand of two human groups from different geographic locales and subsistence patterns and raise questions about assumptions of activity levels in archaeological populations and their relationships to trabecular BV/TV.

The deep trabecular structure of first metacarpals in extant hominids

OBJECTIVES

Recent studies have associated subarticular trabecular bone distribution in the extant hominid first metacarpal (Mc1) with observed thumb use, to infer fossil hominin thumb use. Here, we analyze the entire Mc1 to test for interspecific differences in: (1) the absolute volume of trabecular volume fraction, (2) the distribution of the deeper trabecular network, and (3) the distribution of trabeculae in the medullary cavity, especially beneath the Mc1 disto-radial flange.

MATERIALS AND METHODS

Trabecular bone was imaged using micro-computed tomography in a sample of Homo sapiens (n = 11), Pan paniscus (n = 10), Pan troglodytes (n = 11), Gorilla gorilla (n = 10) and Pongo sp., (n = 7). Using Canonical Holistic Morphometric Analysis (cHMA), we tested for interspecific differences in the trabecular bone volume fraction (BV/TV) and its relative distribution (rBV/TV) throughout the Mc1, including within the head, medullary cavity, and base.

RESULTS

P. paniscus had the highest, and H. sapiens the lowest, BV/TV relative to other species. rBV/TV distribution statistically distinguished the radial concentrations and lack of medullary trabecular bone in the H. sapiens Mc1 from all other hominids. H. sapiens and, to a lesser extent, G. gorilla also had a significantly higher trabecular volume beneath the disto-radial flange relative to other hominids.

DISCUSSION

These results are consistent with differences in observed thumb use in these species and may also reflect systemic differences in bone volume fraction. The trabecular bone extension into the medullary cavity and concentrations beneath the disto-radial flange may represent crucial biomechanical signals that will aid in the inference of fossil hominin thumb use.

Trabecular bone structure of the proximal capitate in extant hominids and fossil hominins with implications for midcarpal joint loading and the dart-thrower's motion

OBJECTIVES

This research examines whether the distribution of trabecular bone in the proximal capitates of extant hominids, as well as several fossil hominin taxa, is associated with the oblique path of the midcarpal joint known as the dart-thrower's motion (DTM).

MATERIALS AND METHODS

We analyzed proximal capitates from extant (Pongo n = 12; Gorilla n = 11; Pan n = 10; fossil and recent Homo sapiens n = 29) and extinct (Australopithecus sediba n = 2; Homo naledi n = 1; Homo floresiensis n = 2; Neandertals n = 3) hominids using a new canonical holistic morphometric analysis, which quantifies and visualizes the distribution of trabecular bone using relative bone volume as a fraction of total volume (rBV/TV).

RESULTS

Homo sapiens and Neandertals had a continuous band of high rBV/TV that extended across the scaphoid, lunate, and hamate subarticular regions, but other fossil hominins and extant great apes did not. A. sediba expressed a distinct combination of human-like and Pan-like rBV/TV distribution. Both H. floresiensis and H. naledi had high rBV/TV on the ulnar-side of the capitate but low rBV/TV on the radial-side.

CONCLUSION

The proximal capitates of H. sapiens and Neandertals share a distinctive distribution of trabecular bone that suggests that these two species of Homo regularly load(ed) their midcarpal joints along the full extent of the oblique path of the DTM. The observed pattern in A. sediba suggests that human-like stress at the capito-scaphoid articular surface was combined with Pan-like wrist postures, whereas the patterns in H. floresiensis and H. naledi suggest their midcarpal joints were loaded differently from that of H. sapiens and Neandertals.

Morphological integration and shape covariation between the trapezium and first metacarpal among extant hominids

OBJECTIVES

The shape of the trapezium and first metacarpal (Mc1) markedly influence thumb mobility, strength, and the manual abilities of extant hominids. Previous research has typically focused solely on trapezium-Mc1 joint shape. Here we investigate how morphological integration and shape covariation between the entire trapezium (articular and non-articular surfaces) and the entire Mc1 reflect known differences in thumb use in extant hominids.

MATERIALS AND METHODS

We analyzed shape covariation in associated trapezia and Mc1s across a large, diverse sample of Homo sapiens (n = 40 individuals) and other extant hominids (Pan troglodytes, n = 16; Pan paniscus, n = 13; Gorilla gorilla gorilla, n = 27; Gorilla beringei, n = 6; Pongo pygmaeus, n = 14; Pongo abelii, n = 9) using a 3D geometric morphometric approach. We tested for interspecific significant differences in degree of morphological integration and patterns of shape covariation between the entire trapezium and Mc1, as well as within the trapezium-Mc1 joint specifically.

RESULTS

Significant morphological integration was only found in the trapezium-Mc1 joint of H. sapiens and G. g. gorilla. Each genus showed a specific pattern of shape covariation between the entire trapezium and Mc1 that was consistent with different intercarpal and carpometacarpal joint postures.

DISCUSSION

Our results are consistent with known differences in habitual thumb use, including a more abducted thumb during forceful precision grips in H. sapiens and a more adducted thumb in other hominids used for diverse grips. These results will help to infer thumb use in fossil hominins.

Variation and covariation of external shape and cross-sectional geometry in the human metacarpus

OBJECTIVES

Analyses of external bone shape using geometric morphometrics (GM) and cross-sectional geometry (CSG) are frequently employed to investigate bone structural variation and reconstruct activity in the past. However, the association between these methods has not been thoroughly investigated. Here, we analyze whole bone shape and CSG variation of metacarpals 1-5 and test covariation between them.

MATERIALS AND METHODS

We analyzed external metacarpal shape using GM and CSG of the diaphysis at three locations in metacarpals 1-5. The study sample includes three modern human groups: crew from the shipwrecked Mary Rose (n = 35 metacarpals), a Pre-industrial group (n = 50), and a Post-industrial group (n = 31). We tested group differences in metacarpal shape and CSG, as well as correlations between these two aspects of metacarpal bone structure.

RESULTS

GM analysis demonstrated metacarpus external shape variation is predominately related to changes in diaphyseal width and articular surface size. Differences in external shape were found between the non-pollical metacarpals of the Mary Rose and Pre-industrial groups and between the third metacarpals of the Pre- and Post-industrial groups. CSG results suggest the Mary Rose and Post-industrial groups have stronger metacarpals than the Pre-industrial group. Correlating CSG and external shape showed significant relationships between increasing external robusticity and biomechanical strength across non-pollical metacarpals (r: 0.815-0.535; p ≤ 0.05).

DISCUSSION

Differences in metacarpal cortical structure and external shape between human groups suggest differences in the type and frequency of manual activities. Combining these results with studies of entheses and kinematics of the hand will improve reconstructions of manual behavior in the past.

Cortical bone distribution of the proximal phalanges in great apes: implications for reconstructing manual behaviours

Primate fingers are typically in direct contact with the environment during both locomotion and manipulation, and aspects of external phalangeal morphology are known to reflect differences in hand use. Since bone is a living tissue that can adapt in response to loading through life, the internal bone architecture of the manual phalanges should also reflect differences in manual behaviours. Here, we use the R package Morphomap to analyse high-resolution microCT scans of hominid proximal phalanges of digits 2-5 to determine whether cortical bone structure reflects variation in manual behaviours between bipedal (Homo), knuckle-walking (Gorilla, Pan) and suspensory (Pongo) taxa. We test the hypothesis that relative cortical bone distribution patterns and cross-sectional geometric properties will differ both among extant great apes and across the four digits due to locomotor and postural differences. Results indicate that cortical bone structure reflects the varied hand postures employed by each taxon. The phalangeal cortices of Pongo are significantly thinner and have weaker cross-sectional properties relative to the African apes, yet thick cortical bone under their flexor sheath ridges corresponds with predicted loading during flexed finger grips. Knuckle-walking African apes have even thicker cortical bone under the flexor sheath ridges, as well as in the region proximal to the trochlea, but Pan also has thicker diaphyseal cortices than Gorilla. Humans display a distinct pattern of distodorsal thickening, as well as relatively thin cortices, which may reflect the lack of phalangeal curvature combined with frequent use of flexed fingered hand grips during manipulation. Within each taxon, digits 2-5 have a similar cortical distribution in Pongo, Gorilla and, unexpectedly, Homo, which suggest similar loading of all fingers during habitual locomotion or hand use. In Pan, however, cortical thickness differs between the fingers, potentially reflecting differential loading during knuckle-walking. Inter- and intra-generic variation in phalangeal cortical bone structure reflects differences in manual behaviours, offering a comparative framework for reconstructing hand use in fossil hominins.

The various meanings and uses of bone "remodeling" in biological anthropology: A review

OBJECTIVES

In modern bone biology, the term "remodeling" generally refers to internal bone turnover that creates secondary osteons. However, it is also widely used by skeletal biologists, including biological anthropologists as a catch-all term to refer to different skeletal changes. In this review, we investigated how "remodeling" is used across topics on skeletal biology in biological anthropology to demonstrate potential problems with such pervasive use of a generalized term.

METHODS

Using PubMed and Google Scholar, we selected and reviewed 205 articles that use the term remodeling to describe skeletal processes and have anthropological implications. Nine edited volumes were also reviewed as examples of collaborative work by different experts to demonstrate the diverse and extensive use of the term remodeling.

RESULTS

Four general meanings of bone "remodeling" were identified, namely, internal turnover, functional adaptation, fracture repair, and growth remodeling. Additionally, remodeling is also used to refer to a broad array of pathological skeletal changes.

DISCUSSION

Although we initially identified four general meanings of bone remodeling, they are not mutually exclusive and often occur in combination. The term "remodeling" has become an extensively used catch-all term to refer to different processes and outcomes of skeletal changes, which inevitably lead to misunderstanding and a loss of information. Such ambiguity and confusion are potentially problematic as the field of biological anthropology becomes increasingly multidisciplinary. Therefore, we advocate for precise, context-specific definitions and explanations of bone remodeling as it continues to be used across disciplines within and beyond biological anthropology.

The effect of different grasping types on strain distributions in the trapezium of bonobos (Pan paniscus)

The thumb has played a key role in primate evolution due to its involvement in grasping and manipulation. A large component of this wide functionality is by virtue of the uniquely shaped trapeziometacarpal (TMC) joint. This TMC joint allows for a broad range of functional positions, but how its bone structure is adapted to withstand such a large variety of loading regimes is poorly understood. Here, we outline a novel, integrated finite element - micro finite element (FE-µFE) workflow to analyse strain distributions across the internal bony architecture. We have applied this modelling approach to study functional adaptation in the bonobo thumb. More specifically, the approach allows us to evaluate how strain is distributed through the trapezium upon loading of its distal articular facet. As loading conditions, we use pressure distributions for different types of grasping that were estimated in a previous study. Model evaluation shows that the simulated strain values fall within realistic boundaries of the mechanical response of bone. The results show that the strain distributions between the simulated grasps are highly similar, with dissipation towards the proximo-ulnar cluster of trabeculae regardless of trapezial bone architecture. This study presents an innovative FE-µFE approach to simulating strain distributions, and yields insight in the functional adaptation of the TMC joint in bonobos.

A computational framework for canonical holistic morphometric analysis of trabecular bone

Bone is a remarkable, living tissue that functionally adapts to external loading. Therefore, bone shape and internal structure carry information relevant to many disciplines, including medicine, forensic science, and anthropology. However, morphometric comparisons of homologous regions across different individuals or groups are still challenging. In this study, two methods were combined to quantify such differences: (1) Holistic morphometric analysis (HMA) was used to quantify morphometric values in each bone, (2) which could then be mapped to a volumetric mesh of a canonical bone created by a statistical free-form deformation model (SDM). Required parameters for this canonical holistic morphometric analysis (cHMA) method were identified and the robustness of the method was evaluated. The robustness studies showed that the SDM converged after one to two iterations, had only a marginal bias towards the chosen starting image, and could handle large shape differences seen in bones of different species. Case studies were performed on metacarpal bones and proximal femora of different primate species to confirm prior study results. The differences between species could be visualised and statistically analysed in both case studies. cHMA provides a framework for performing quantitative comparisons of different morphometric quantities across individuals or groups. These comparisons facilitate investigation of the relationship between spatial morphometric variations and function or pathology, or both.

Ontogenetic changes to metacarpal trabecular bone structure in mountain and western lowland gorillas

The trabecular bone morphology of adult extant primates has been shown to reflect mechanical loading related to locomotion. However, ontogenetic studies of humans and other mammals suggest an adaptive lag between trabecular bone response and current mechanical loading patterns that could result in adult trabecular bone morphology reflecting juvenile behaviours. This study investigates ontogenetic changes in the trabecular bone structure of the third metacarpal of mountain gorillas (Gorilla beringei beringei; n = 26) and western lowland gorillas (Gorilla gorilla gorilla; n = 26) and its relationship to expected changes in locomotor loading patterns. Results show that trabecular bone reflects predicted mechanical loading throughout ontogeny. Bone volume fraction, trabecular thickness and trabecular number are low at birth and increase with age, although degree of anisotropy remains relatively stable throughout ontogeny. A high concentration of bone volume fraction can be observed in the distopalmar region of the third metacarpal epiphysis in early ontogeny, consistent with the high frequency of climbing, suspensory and other grasping behaviours in young gorillas. High trabecular bone concentration increases dorsally in the epiphysis during the juvenile period as terrestrial knuckle-walking becomes the primary form of locomotion. However, fusion of the epiphysis does not take place until 10-11 years of age, and overall trabecular structure does not fully reflect the adult pattern until 12 years of age, indicating a lag between adult-like behaviours and adult-like trabecular morphology. We found minimal differences in trabecular ontogeny between mountain and western lowland gorillas, despite presumed variation in the frequencies of arboreal locomotor behaviours. Altogether, ontogenetic changes in Gorilla metacarpal trabecular structure reflect overall genus-level changes in locomotor behaviours throughout development, but with some ontogenetic lag that should be considered when drawing functional conclusions from bone structure in extant or fossil adolescent specimens.

Cortical and trabecular bone structure of the hominoid capitate

Morphological variation in the hominoid capitate has been linked to differences in habitual locomotor activity due to its importance in movement and load transfer at the midcarpal joint proximally and carpometacarpal joints distally. Although the shape of bones and their articulations are linked to joint mobility, the internal structure of bones has been shown experimentally to reflect, at least in part, the loading direction and magnitude experienced by the bone. To date, it is uncertain whether locomotor differences among hominoids are reflected in the bone microarchitecture of the capitate. Here, we apply a whole‐bone methodology to quantify the cortical and trabecular architecture (separately and combined) of the capitate across bipedal (modern Homo sapiens), knuckle‐walking (Pan paniscus, Pan troglodytes, Gorilla sp.), and suspensory (Pongo sp.) hominoids (n = 69). It is hypothesized that variation in bone microarchitecture will differentiate these locomotor groups, reflecting differences in habitual postures and presumed loading force and direction. Additionally, it is hypothesized that trabecular and cortical architecture in the proximal and distal regions, as a result of being part of mechanically divergent joints proximally and distally, will differ across these portions of the capitate. Results indicate that the capitate of knuckle‐walking and suspensory hominoids is differentiated from bipedal Homo primarily by significantly thicker distal cortical bone. Knuckle‐walking taxa are further differentiated from suspensory and bipedal taxa by more isotropic trabeculae in the proximal capitate. An allometric analysis indicates that size is not a significant determinate of bone variation across hominoids, although sexual dimorphism may influence some parameters within Gorilla. Results suggest that internal trabecular and cortical bone is subjected to different forces and functional adaptation responses across the capitate (and possibly other short bones). Additionally, while separating trabecular and cortical bone is normal protocol of current whole‐bone methodologies, this study shows that when applied to carpals, removing or studying the cortical bone separately potentially obfuscates functionally relevant signals in bone structure.

Using point clouds to investigate the relationship between trabecular bone phenotype and behavior: An example utilizing the human calcaneus

OBJECTIVES

The objective of this study is to demonstrate a new method for analyzing trabecular bone volume fraction and degree of anisotropy in three dimensions.

METHODS

We use a combination of automatic mesh registration, point-cloud correspondence registration, and P-value corrected univariate statistical tests to compare bone volume fraction and degree of anisotropy on a point by point basis across the entire calcaneus of two human groups with different subsistence strategies.

RESULTS

We found that the patterns of high and low bone volume fraction and degree of anisotropy distribution between the Black Earth (hunter-gatherers) and Norris Farms (mixed-strategy agriculturalists) are very similar, but differ in magnitude. The hunter-gatherers exhibit higher levels of bone volume fraction and less anisotropic trabecular bone organization. Additionally, patterns of bone volume fraction and degree of anisotropy in the calcaneus correspond well with biomechanical expectations of relative forces experienced during walking and running.

CONCLUSIONS

We conclude that comparing site-specific, localized differences in trabecular bone variables such as bone volume fraction and degree of anisotropy in three-dimensions is a powerful analytical tool. This method makes it possible to determine where similarities and differences between groups are located within the whole skeletal element of interest. The visualization of multiple variables also provides a way for researchers to see how the trabecular bone variables interact within the morphology, and allows for a more nuanced understanding of how they relate to one another and the broader mechanical environment.

The biomechanics of knuckle-walking: 3-D kinematics of the chimpanzee and macaque wrist, hand and fingers

The origin and evolution of knuckle-walking has long been a key focus in understanding African ape, including human, origins. Yet, despite numerous studies documenting morphological characteristics potentially associated with knuckle-walking, little quantitative three-dimensional (3-D) data exist of forelimb motion during knuckle-walking. Nor do any comparative 3-D data exist for hand postures used during quadrupedalism in monkeys. This lack of data has limited the testability of proposed adaptations for knuckle-walking in African apes. This study presents the first 3-D kinematic data of the wrist, hand and metacarpophalangeal joints during knuckle-walking in chimpanzees and in macaques using digitigrade and palmigrade hand postures. These results clarify the unique characteristics of, and commonalities between, knuckle-walking and digitigrady/palmigrady in multiple planes of motion. Notably, chimpanzees utilized more wrist ulnar deviation than any macaque hand posture. Maximum extension of the chimpanzee wrist was slight (5-20 deg) and generally overlapped with macaque digitigrady. Metacarpophalangeal joint motion displayed distinct differences between digits in both species, likely related to the timing of force application. These data also reveal that maximum metacarpophalangeal extension angles during knuckle-walking (26-59 deg) were generally higher than previously considered. In macaques, maximum metacarpophalangeal extension during digitigrady and palmigrady overlapped for most digits, highlighting additional complexity in the interpretation of skeletal features that may be related to limiting metacarpophalangeal motion. Most importantly, however, these new 3-D data serve as a fundamental dataset with which evaluation of proposed musculoskeletal adaptations for knuckle-walking can be tested.

The position of Australopithecus sediba within fossil hominin hand use diversity

The human lineage is marked by a transition in hand use, from locomotion towards increasingly dexterous manipulation, concomitant with bipedalism. The forceful precision grips used by modern humans probably evolved in the context of tool manufacture and use, but when and how many times hominin hands became principally manipulative remains unresolved. We analyse metacarpal trabecular and cortical bone, which provide insight into behaviour during an individual's life, to demonstrate previously unrecognized diversity in hominin hand use. The metacarpals of the palm in Australopithecus sediba have trabecular morphology most like orangutans and consistent with locomotor power-grasping with the fingers, while that of the thumb is consistent with human-like manipulation. This internal morphology is the first record of behaviour consistent with a hominin that used its hand for both arboreal locomotion and human-like manipulation. This hand use is distinct from other fossil hominins in this study, including A. afarensis and A. africanus.

Evidence for habitual climbing in a Pleistocene hominin in South Africa

Here we present evidence of hominin locomotor behavior from the trabecular bone of the femur. We show evidence for habitual use of highly flexed hip postures, which could potentially indicate regular climbing in a South African hominin from Sterkfontein, which is either Paranthropus robustus or Homo. Second, we present evidence that Australopithecus africanus likely did not climb at the frequencies seen in extant nonhuman apes, and exhibits a modern, human-like pattern of loading at the hip joint. These results challenge the prevailing view of a single transition to bipedalism within the hominin clade by providing evidence of climbing in a more recent, non-Australopithecus South African hominin, and add to the increasing evidence for locomotor diversity in the hominin clade.

Bipedalism is a defining trait of the hominin lineage, associated with a transition from a more arboreal to a more terrestrial environment. While there is debate about when modern human-like bipedalism first appeared in hominins, all known South African hominins show morphological adaptations to bipedalism, suggesting that this was their predominant mode of locomotion. Here we present evidence that hominins preserved in the Sterkfontein Caves practiced two different locomotor repertoires. The trabecular structure of a proximal femur (StW 522) attributed to Australopithecus africanus exhibits a modern human-like bipedal locomotor pattern, while that of a geologically younger specimen (StW 311) attributed to either Homo sp. or Paranthropus robustus exhibits a pattern more similar to nonhuman apes, potentially suggesting regular bouts of both climbing and terrestrial bipedalism. Our results demonstrate distinct morphological differences, linked to behavioral differences between Australopithecus and later hominins in South Africa and contribute to the increasing evidence of locomotor diversity within the hominin clade.

Metacarpophalangeal joint loads during bonobo locomotion: model predictions versus proxies

The analysis of internal trabecular and cortical bone has been an informative tool for drawing inferences about behaviour in extant and fossil primate taxa. Within the hand, metacarpal bone architecture has been shown to correlate well with primate locomotion; however, the extent of morphological differences across taxa is unexpectedly small given the variability in hand use. One explanation for this observation is that the activity-related differences in the joint loads acting on the bone are simply smaller than estimated based on commonly used proxies (i.e. external loading and joint posture), which neglect the influence of muscle forces. In this study, experimental data and a musculoskeletal finger model are used to test this hypothesis by comparing differences between climbing and knuckle-walking locomotion of captive bonobos (Pan paniscus) based on (i) joint load magnitude and direction predicted by the models and (ii) proxy estimations. The results showed that the activity-related differences in predicted joint loads are indeed much smaller than the proxies would suggest, with joint load magnitudes being almost identical between the two locomotor modes. Differences in joint load directions were smaller but still evident, indicating that joint load directions might be a more robust indicator of variation in hand use than joint load magnitudes. Overall, this study emphasizes the importance of including muscular forces in the interpretation of skeletal remains and promotes the use of musculoskeletal models for correct functional interpretations.

Trabecular variation in the first metacarpal and manipulation in hominids

OBJECTIVES

The dexterity of fossil hominins is often inferred by assessing the comparative manual anatomy and behaviors of extant hominids, with a focus on the thumb. The aim of this study is to test whether trabecular structure is consistent with what is currently known about habitually loaded thumb postures across extant hominids.

MATERIALS AND METHODS

We analyze first metacarpal (Mc1) subarticular trabecular architecture in humans (Homo sapiens, n = 10), bonobos (Pan paniscus, n = 10), chimpanzees (Pan troglodytes, n = 11), as well as for the first time, gorillas (Gorilla gorilla gorilla, n = 10) and orangutans (Pongo sp., n = 1, Pongo abelii, n = 3 and Pongo pygmaeus, n = 5). Using a combination of subarticular and whole-epiphysis approaches, we test for significant differences in relative trabecular bone volume (RBV/TV) and degree of anisotropy (DA) between species.

RESULTS

Humans have significantly greater RBV/TV on the radiopalmar aspects of both the proximal and distal Mc1 subarticular surfaces and greater DA throughout the Mc1 head than other hominids. Nonhuman great apes have greatest RBV/TV on the ulnar aspect of the Mc1 head and the palmar aspect of the Mc1 base. Gorillas possessed significantly lower DA in the Mc1 head than any other taxon in our sample.

DISCUSSION

These results are consistent with abduction of the thumb during forceful "pad-to-pad" precision grips in humans and, in nonhuman great apes, a habitually adducted thumb that is typically used in precision and power grips. This comparative context will help infer habitual manipulative and locomotor grips in fossil hominins.