Sequential keratinocytic differentiation and maturation in a three-dimensional model of human artificial oral mucosa

Microphysiological Modeling of Gingival Tissues and Host-Material Interactions Using Gingiva-on-Chip

Gingiva plays a crucial barrier role at the interface of teeth, tooth-supporting structures, microbiome, and external agents. To mimic this complex microenvironment, an in vitro microphysiological platform and biofabricated full-thickness gingival equivalents (gingiva-on-chip) within a vertically stacked microfluidic device is developed. This design allowed long-term and air-liquid interface culture, and host-material interactions under flow conditions. Compared to static cultures, dynamic cultures on-chip enabled the biofabrication of gingival equivalents with stable mucosal matrix, improved epithelial morphogenesis, and barrier features. Additionally, a diseased state with disrupted barrier function representative of gingival/oral mucosal ulcers is modeled. The apical flow feature is utilized to emulate the mechanical action of mouth rinse and integrate the assessment of host-material interactions and transmucosal permeation of oral-care formulations in both healthy and diseased states. Although the gingiva-on-chip cultures have thicker and more mature epithelium, the flow of oral-care formulations induced increased tissue disruption and cytotoxic features compared to static conditions. The realistic emulation of mouth rinsing action facilitated a more physiological assessment of mucosal irritation potential. Overall, this microphysiological system enables biofabrication of human gingiva equivalents in intact and ulcerated states, providing a miniaturized and integrated platform for downstream host-material and host-microbiome applications in gingival and oral mucosa research.

Development of an oral mucosal irritation test using a three-dimensional human buccal oral mucosal model

The oral mucosa can become irritated by oral care products and lip cosmetics. Therefore, it is important to determine the irritation potential of their ingredients and products during safety evaluations. We developed a method for oral mucosal irritation test using EpiOral, which is a three-dimensional cultured model. Exposure of sodium lauryl sulphate (SLS) to EpiOral showed a dose-dependent decrease in cell viability. Under 120 min exposure conditions, SLS irritation was detected when 60% cell viability was set as a criterion. Evaluation of the irritancy of SLS and four other raw materials used in oral products at three laboratories under the above conditions confirmed good transferability of the test. Focused on the similarity of the oral and eye mucous, 32 chemicals categorised by the UN-GHS eye-irritation classification were evaluated to ensure the reliability of our criteria at these laboratories. The concordance rate between the UN-GHS classification and our test results was 100% for irritants and 60% for non-irritants. The good intra-laboratory reproducibility of our test was confirmed from the evaluation results of negative and positive controls, and the good inter-laboratory reproducibility was confirmed from the results of 32 chemicals. These findings showed that oral mucosal irritation can be evaluated using EpiOral.

3D engineered human gingiva fabricated with electrospun collagen scaffolds provides a platform for in vitro analysis of gingival seal to abutment materials

In order to advance models of human oral mucosa towards routine use, these models must faithfully mimic the native tissue structure while also being scalable and cost efficient. The goal of this study was to develop a low-cost, keratinized human gingival model with high fidelity to human attached gingiva and demonstrate its utility for studying the implant-tissue interface. Primary human gingival fibroblasts (HGF) and keratinocytes (HGK) were isolated from clinically healthy gingival biopsies. Four matrices, electrospun collagen (ES), decellularized dermis (DD), type I collagen gels (Gel) and released type I collagen gels (Gel-R)) were tested to engineer lamina propria and gingiva. HGF viability was similar in all matrices except for Gel-R, which was significantly decreased. Cell penetration was largely limited to the top layers of all matrices. Histomorphometrically, engineered human gingiva was found to have similar appearance to the native normal human gingiva except absence of rete pegs. Immunohistochemical staining for cell phenotype, differentiation and extracellular matrix composition and organization within 3D engineered gingiva made with electrospun collagen was mostly in agreement with normal gingival tissue staining. Additionally, five types of dental material posts (5-mm diameter x 3-mm height) with different surface characteristics were used [machined titanium, SLA (sandblasted-acid etched) titanium, TiN-coated (titanium nitride-coated) titanium, ceramic, and PEEK (Polyetheretherketone) to investigate peri-implant soft tissue attachment studied by histology and SEM. Engineered epithelial and stromal tissue migration to the implant-gingival tissue interface was observed in machined, SLA, ceramic, and PEEK groups, while TiN was lacking attachment. Taken together, the results suggest that electrospun collagen scaffolds provide a scalable, reproducible and cost-effective lamina propria and 3D engineered gingiva that can be used to explore biomaterial-soft tissue interface.

Neural crest-derived cells possess differentiation potential to keratinocytes in the process of wound healing

Neural crest-derived cells (NCDCs), which exist as neural crest cells during the fetal stage and differentiate into palate cells, also exist in adult palate tissues, though with unknown roles. In the present study, NCDCs were labeled with EGFP derived from P0-Cre/CAG-CAT-EGFP (P0-EGFP) double transgenic mice, then their function in palate mucosa wound healing was analyzed. As a palate wound healing model, left-side palate mucosa of P0-EGFP mice was resected, and stem cell markers and keratinocyte markers were detected in healed areas. NCDCs were extracted from normal palate mucosa and precultured with stem cell media for 14 days, then were differentiated into keratinocytes or osteoblasts to analyze pluripotency. The wound healing process started with marginal mucosal regeneration on day two and the entire wound area was lined by regenerated mucosa with EGFP-positive cells (NCDCs) on day 28. EGFP-positive cells comprised approximately 60% of cells in healed oral mucosa, and 65% of those expressed stem cell markers (Sca-1⁺, PDGFRα⁺) and 30% expressed a keratinocyte marker (CK13⁺). In tests of cultured palate mucosa cells, approximately 70% of EGFP-positive cells expressed stem cell markers (Sca-1⁺, PDGFRα⁺). Furthermore, under differentiation inducing conditions, cultured EGFP-positive cells were successfully induced to differentiate into keratinocytes and osteoblasts. We concluded that NCDCs exist in adult palate tissues as stem cells and have potential to differentiate into various cell types during the wound healing process.

Usefulness of a Nanostructured Fibrin-Agarose Bone Substitute in a Model of Severely Critical Mandible Bone Defect

Critical defects of the mandibular bone are very difficult to manage with currently available materials and technology. In the present work, we generated acellular and cellular substitutes for human bone by tissue engineering using nanostructured fibrin-agarose biomaterials, with and without adipose-tissue-derived mesenchymal stem cells differentiated to the osteogenic lineage using inductive media. Then, these substitutes were evaluated in an immunodeficient animal model of severely critical mandibular bone damage in order to assess the potential of the bioartificial tissues to enable bone regeneration. The results showed that the use of a cellular bone substitute was associated with a morpho-functional improvement of maxillofacial structures as compared to negative controls. Analysis of the defect site showed that none of the study groups fully succeeded in generating dense bone tissue at the regeneration area. However, the use of a cellular substitute was able to improve the density of the regenerated tissue (as determined via CT radiodensity) and form isolated islands of bone and cartilage. Histologically, the regenerated bone islands were comparable to control bone for alizarin red and versican staining, and superior to control bone for toluidine blue and osteocalcin in animals grafted with the cellular substitute. Although these results are preliminary, cellular fibrin-agarose bone substitutes show preliminary signs of usefulness in this animal model of severely critical mandibular bone defect.

Study of tissue engineered vascularised oral mucosa-like structures based on ACVM-0.25% HLC-I scaffold in vitro and in vivo

PURPOSE

To explore the feasibility of constructing tissue-engineered vascularised oral mucosa-like structures with rabbit ACVM-0.25% HLC-I scaffold and human gingival fibroblasts (HGFs), human gingival epithelial cells (HGECs) and vascular endothelial-like cells (VEC-like cells).

METHOD

Haematoxylin and Eosin (H&E) staining, immunohistochemical, immunofluorescence, 5-ethynyl-2'-deoxyuridine (EdU) staining and scanning electron microscope (SEM) were performed to detect the growth status of cells on the scaffold complex. After the scaffold complex implanted into nude mice for 28 days, tissues were harvested to observe the cell viability and morphology by the same method as above. Additionally, biomechanical experiments were used to assess the stability of composite scaffold.

RESULTS

Immunofluorescence and Immunohistochemistry showed positive expression of Vimentin, S100A₄ and CK, and the induced VEC-like cells had the ability to form tubule-like structures. In vitro observation results showed that HGFs, HGECs and VEC-like had good compatibility with ACVM-0.25% HLC-I and could be layered and grow in the scaffold. After implanted, the mice had no immune rejection and no obvious scar repair on the body surface. The biomfechanical test results showed that the composite scaffold has strong stability.

CONCLUSION

The tissue-engineered vascularised complexes constructed by HGFs, HGECs, VEC-like cells and ACVM-0.25% HLC-I has good biocompatibility and considerable strength.

Evaluation of the optical and biomechanical properties of bioengineered human skin generated with fibrin-agarose biomaterials

SIGNIFICANCE

Recent generation of bioengineered human skin allowed the efficient treatment of patients with severe skin defects. However, the optical and biomechanical properties of these models are not known.

AIM

Three models of bioengineered human skin based on fibrin-agarose biomaterials (acellular, dermal skin substitutes, and complete dermoepidermal skin substitutes) were generated and analyzed.

APPROACH

Optical and biomechanical properties of these artificial human skin substitutes were investigated using the inverse adding-doubling method and tensile tests, respectively.

RESULTS

The analysis of the optical properties revealed that the model that most resembled the optical behavior of the native human skin in terms of absorption and scattering properties was the dermoepidermal human skin substitutes after 7 to 14 days in culture. The time-course evaluation of the biomechanical parameters showed that the dermoepidermal substitutes displayed significant higher values than acellular and dermal skin substitutes for all parameters analyzed and did not differ from the control skin for traction deformation, stress, and strain at fracture break.

CONCLUSIONS

We demonstrate the crucial role of the cells from a physical point of view, confirming that a bioengineered dermoepidermal human skin substitute based on fibrin-agarose biomaterials is able to fulfill the minimal requirements for skin transplants for future clinical use at early stages of in vitro development.

In Vitro Generation of Novel Functionalized Biomaterials for Use in Oral and Dental Regenerative Medicine Applications. Running Title: Fibrin-Agarose Functionalized Scaffolds

Recent advances in tissue engineering offer innovative clinical alternatives in dentistry and regenerative medicine. Tissue engineering combines human cells with compatible biomaterials to induce tissue regeneration. Shortening the fabrication time of biomaterials used in tissue engineering will contribute to treatment improvement, and biomaterial functionalization can be exploited to enhance scaffold properties. In this work, we have tested an alternative biofabrication method by directly including human oral mucosa tissue explants within the biomaterial for the generation of human bioengineered mouth and dental tissues for use in tissue engineering. To achieve this, acellular fibrin-agarose scaffolds (AFAS), non-functionalized fibrin-agarose oral mucosa stroma substitutes (n-FAOM), and novel functionalized fibrin-agarose oral mucosa stroma substitutes (F-FAOM) were developed and analyzed after 1, 2, and 3 weeks of in vitro development to determine extracellular matrix components as compared to native oral mucosa controls by using histochemistry and immunohistochemistry. Results demonstrate that functionalization speeds up the biofabrication method and contributes to improve the biomimetic characteristics of the scaffold in terms of extracellular matrix components and reduce the time required for in vitro tissue development.

Effects of HEMA on Nrf2-related gene expression using a newly developed 3D co-culture model of the oral mucosa

OBJECTIVE

2-Hydroxyethyl methacrylate (HEMA) is a component of many resin-modified materials and elutes from dental restorations into the oral cavity. Objective of our investigation was to determine the impact of HEMA on oral keratinocytes (OKF6/TERT2) and gingival fibroblasts (HGFs) in a newly established 3D co-culture model (3D-CCM) and to analyze the permeability of OKF6/TERT2 cells for HEMA.

METHODS

Well-characterized 3D-CCMs, consisting of confluent OKF6/TERT2 cells on cell culture inserts above HGF-containing collagen gels, were treated supra-epithelial with HEMA. Mass spectrometry was used to measure the supra- and sub-epithelial distribution of HEMA after 24 h. The impact of HEMA on nuclear factor erythroid 2-related factor 2 (Nrf2) target genes was measured by qRT-PCR and western blot analysis.

RESULTS

Mass spectrometry showed that HEMA was evenly distributed above and below the keratinocyte layer after 24 h. Analyzed target genes of Nrf2 were induced in both cell types on the mRNA-level but less pronounced in HGFs. On the protein-level, both cell types showed similar effects: At 5 mM HEMA, heme oxygenase-1 was induced 5.1-fold in OKF6/TERT2 cells and 4.1-fold in HGFs. NAD(P)H quinone dehydrogenase-1 was approximately induced 1.85-fold in both cell types.

SIGNIFICANCE

Our 3D-CCM is suitable to analyze the biocompatibility of dental materials due to an improved simulation of the oral mucosa compared to monolayer cultures. Our results indicate that HEMA is able to penetrate a dense layer of keratinocytes and to activate the cellular oxidative defense response. This may be due to the activation of the Nrf2-pathway in both cell types.

Engineering epithelial-stromal interactions in vitro for toxicology assessment

Crosstalk between epithelial and stromal cells drives the morphogenesis of ectodermal organs during development and promotes normal mature adult epithelial tissue homeostasis. Epithelial-stromal interactions (ESIs) have historically been examined using mammalian models and ex vivo tissue recombination. Although these approaches have elucidated signaling mechanisms underlying embryonic morphogenesis processes and adult mammalian epithelial tissue function, they are limited by the availability of tissue, low throughput, and human developmental or physiological relevance. In this review, we describe how bioengineered ESIs, using either human stem cells or co-cultures of human primary epithelial and stromal cells, have enabled the development of human in vitro epithelial tissue models that recapitulate the architecture, phenotype, and function of adult human epithelial tissues. We discuss how the strategies used to engineer mature epithelial tissue models in vitro could be extrapolated to instruct the design of organotypic culture models that can recapitulate the structure of embryonic ectodermal tissues and enable the in vitro assessment of events critical to organ/tissue morphogenesis. Given the importance of ESIs towards normal epithelial tissue development and function, such models present a unique opportunity for toxicological screening assays to incorporate ESIs to assess the impact of chemicals on mature and developing epidermal tissues.

Development of a multilayered palate substitute in rabbits: a histochemical ex vivo and in vivo analysis

Current tissue engineering technology focuses on developing simple tissues, whereas multilayered structures comprising several tissue types have rarely been described. We developed a highly biomimetic multilayered palate substitute with bone and oral mucosa tissues using rabbit cells and biomaterials subjected to nanotechnological techniques based on plastic compression. This novel palate substitute was autologously grafted in vivo, and histological and histochemical analyses were used to evaluate biointegration, cell function, and cell differentiation in the multilayered palate substitute. The three-dimensional structure of the multilayered palate substitute was histologically similar to control tissues, but the ex vivo level of cell and tissue differentiation were low as determined by the absence of epithelial differentiation although cytokeratins 4 and 13 were expressed. In vivo grafting was associated with greater cell differentiation, epithelial stratification, and maturation, but the expression of cytokeratins 4, 13, 5, and 19 at did not reach control tissue levels. Histochemical analysis of the oral mucosa stroma and bone detected weak signals for proteoglycans, elastic and collagen fibers, mineralization deposits and osteocalcin in the multilayered palate substitute cultured ex vivo. However, in vivo grafting was able to induce cell and tissue differentiation, although the expression levels of these components were always significantly lower than those found in controls, except for collagen in the bone layer. These results suggest that generation of a full-thickness multilayered palate substitute is achievable and that tissues become partially differentiated upon in vivo grafting.

Biocompatible magnetic core-shell nanocomposites for engineered magnetic tissues

The inclusion of magnetic nanoparticles into biopolymer matrixes enables the preparation of magnetic field-responsive engineered tissues. Here we describe a synthetic route to prepare biocompatible core-shell nanostructures consisting of a polymeric core and a magnetic shell, which are used for this purpose. We show that using a core-shell architecture is doubly advantageous. First, gravitational settling for core-shell nanocomposites is slower because of the reduction of the composite average density connected to the light polymer core. Second, the magnetic response of core-shell nanocomposites can be tuned by changing the thickness of the magnetic layer. The incorporation of the composites into biopolymer hydrogels containing cells results in magnetic field-responsive engineered tissues whose mechanical properties can be controlled by external magnetic forces. Indeed, we obtain a significant increase of the viscoelastic moduli of the engineered tissues when exposed to an external magnetic field. Because the composites are functionalized with polyethylene glycol, the prepared bio-artificial tissue-like constructs also display excellent ex vivo cell viability and proliferation. When implanted in vivo, the engineered tissues show good biocompatibility and outstanding interaction with the host tissue. Actually, they only cause a localized transitory inflammatory reaction at the implantation site, without any effect on other organs. Altogether, our results suggest that the inclusion of magnetic core-shell nanocomposites into biomaterials would enable tissue engineering of artificial substitutes whose mechanical properties could be tuned to match those of the potential target tissue. In a wider perspective, the good biocompatibility and magnetic behavior of the composites could be beneficial for many other applications.

Generation and Characterization of Novel Magnetic Field-Responsive Biomaterials

We report the preparation of novel magnetic field-responsive tissue substitutes based on biocompatible multi-domain magnetic particles dispersed in a fibrin-agarose biopolymer scaffold. We characterized our biomaterials with several experimental techniques. First we analyzed their microstructure and found that it was strongly affected by the presence of magnetic particles, especially when a magnetic field was applied at the start of polymer gelation. In these samples we observed parallel stripes consisting of closely packed fibers, separated by more isotropic net-like spaces. We then studied the viability of oral mucosa fibroblasts in the magnetic scaffolds and found no significant differences compared to positive control samples. Finally, we analyzed the magnetic and mechanical properties of the tissue substitutes. Differences in microstructural patterns of the tissue substitutes correlated with their macroscopic mechanical properties. We also found that the mechanical properties of our magnetic tissue substitutes could be reversibly tuned by noncontact magnetic forces. This unique advantage with respect to other biomaterials could be used to match the mechanical properties of the tissue substitutes to those of potential target tissues in tissue engineering applications.