Relationship between instrumental and sensory texture profile of beef semitendinosus muscles with different textures

Influence of Juiciness on In Vivo Aroma Release and Perception of Plant-Based Meat Analogue and Beef Patties

This study investigated how juiciness of the plant-based meat analogue (PBMA) and beef patties affects in vivo aroma release and perception. Patties were prepared from PBMA and beef mince, spiked with menthone as an aroma marker, and cooked to different core temperatures. Increasing core temperature decreased the perceived juiciness of PBMA and beef patties. In vivo in-nose menthone release and peppermint aroma perception were measured simultaneously using proton transfer reaction mass spectrometry and time-intensity profiling. Although differences in perceived juiciness were observed, no significant differences in in vivo aroma release and perception were observed in PBMA and beef patties, suggesting that aroma release and perception were not influenced by juiciness. Juiciness may not affect in vivo aroma release and perception due to the limited amount of serum released from the matrix during mastication and the entrapment of fat in the bolus. The effect of juiciness on aroma release may be product-specific.

Impedance measurement for nondestructive venison pH estimation using touch-type electrodes

The pH of venison is affected by deer capture methods, which affects its water-holding capacity (WHC) during heating. Therefore, cooking or processing venison requires careful consideration of WHC at different pH levels. While this requires nondestructively measuring the pH of venison during distribution, there are no established methods to nondestructively distinguish between normal- and high-pH meats. We investigated the relationship between the pH of venison and impedance measured with touch-type electrodes. Significant negative correlations were found between pH before and after storage and drip loss (p < 0.05) and between impedance before storage using touch-type electrodes measured at 10 kHz and pH after 24 h of storage (p < 0.01). These results provided an estimating equation (y = -0.10x + 10.84) that can be used to nondestructively determine the pH of venison (y) after 24 h of storage by measuring its impedance (x) before storage using touch-type electrodes measured at 10 kHz (p < 0.01). Therefore, this study suggests the possibility of nondestructively estimating venison pH by measuring impedance using touch-type electrodes.

Unveiling the Texture Secrets of Morchella Germplasm: Advanced Grading and Quality Assessment Through Texture Profile Analysis (TPA)

Morchella is an edible mushroom with medical applciations. To explore the correlation between the texture indices of Morchella and to establish a sensory quality evaluation system, the texture quality characteristics of 214 Morchella germplasm resources from our country were analyzed via the Texture Profile Analysis (TPA) method on a texture analyzer. The research revealed significant differences in the texture quality characteristics of both the pileus and stipe among Morchella populations. After the Kolmogorov-Smirnov test, the six texture characteristics were seen to conform to a normal distribution. According to the correlation analysis, there was a significant correlation between the texture characteristics of the pileus, and a significant positive correlation between the hardness and the gumminess of the stipe (correlation coefficient of 0.96). Additionally, the hardness was negatively correlated with cohesiveness and resilience, with correlation coefficients of -0.51 and -0.38. Variation analysis indicated abundant genetic variation in each characteristic. Furthermore, the coefficient of variation for the characteristics of Morchella sextalata was higher than those of other species. Principal component analysis simplified the texture evaluation indices of Morchella pileus into a palatable factor and cohesive factor, and arranged the texture evaluation indexes of Morchella stipe into toughness-hardness factor and cohesive factor. Through comprehensive evaluation and cluster analysis, 10 Morchella strains were selected for subsequent use as breeding or cultivation materials. By comparing three different methods, the 'probability grading method' was determined to be the most suitable evaluation method for the texture quality characteristics of Morchella. The research results established a texture evaluation system for Morchella, offering a reference for selecting and cultivating breeds with superior texture qualities.

Utilizing superheated steam to prepare traditional Chinese twice-cooked pork bellies, exploring its effects on the texture and flavor of fat layers

Fat greatly impacts the overall texture and flavor of pork belly. Twice-cooked pork bellies (TPB), typically boiled and sliced before "back to pot" being stir-fried, is a classic Sichuan cuisine among stir-fried dishes. In this study, the effects of substituting conventional pan-frying (PCV) with superheated steam (SHS) technology on the sensory, texture, microstructure and flavor of the fat layers were investigated. SHS was used as an alternative to boiling (120 °C for 15, 20, 25, and 30 min), and "back to pot" stir-frying was also by SHS. TPB precooked for 25 min (P25) with SHS performed better quality characteristics than PCV, with less collagen fiber disruption and lipid droplet area, resulting in a lower hardness and higher shear force. Besides, the low-oxygen environment of SHS retarded the lipid peroxidation, showing a significantly lower MDA content than PCV. Differently, PCV exhibited more grassy and fatty flavors, while P25 exhibited a unique aroma of fruity and creamy due to its higher UFA/SFA ratios in the pre-cooking stage. Overall, the sensory scores of P25 were comparable to those of PCV (with no significant difference), revealing that SHS is expected to be applied to the industrial production of stir-fried dishes.

Relationship between sensory attributes and instrumental texture properties in meat analog patty system substituted with sweet potato stem

BACKGROUND

Understanding the relationship between perceived sensory attributes and measurable instrumental properties is crucial for replicating the distinct textures of meat in plant-based meat analogs. In this study, plant-based patties composed of textured vegetable protein (TVP) and 10%, 20% and 30% TVPs were substituted with fibers from sweet potato stem (SPS), and their instrumental texture and sensory properties were evaluated.

RESULTS

Samples with 20% SPS showed hardness, cohesiveness and chewiness, which are the mechanical indicators most similar to those of meat. A descriptive sensory analysis by ten trained participants indicated that the SPS-supplemented meat analog patties exhibited characteristics similar to pork patties in terms of firmness, toughness, cohesiveness and smoothness compared to the TVP-only sample. A strong positive correlation between instrumental hardness and sensory firmness was observed (P < 0.01); however, cohesiveness, springiness and chewiness did not show any correlation between instrumental and sensory analyses. Warner-Bratzler shear force (WBSF) values showed positive correlations with sensory cohesiveness, chewiness, toughness, fibrousness, moistness, firmness and springiness (P < 0.05).

CONCLUSION

The results demonstrated the feasibility of physically treated fibers from SPS as a partial substitute for TVP in developing meat analogs. Additionally, this study suggested that instrumental hardness and WBSF measurements can be sound parameters for representing sensory texture characteristics while further developing plant-based meat analogs. © 2024 Society of Chemical Industry.

Evaluation of ultrasound and pulsed electric field combinations on the cooking Losses, texture Profile, and Taste-Related amino acids of chicken breast meat

The search to improve the quality of meat while maintaining its nutritional value and flavor profile has driven the investigation of emerging clean-label non-thermal technologies in the field of meat processing. Ultrasound (US) and pulsed electric field (PEF) treatments have emerged as promising tools for producing high-quality meat products. This study investigated the combined effects of ultrasound and PEF on chicken breast meat quality, focusing on cooking loss, texture, and taste-related amino acids. Ultrasound (24.5 kHz, 300 W, 10 min) combined with PEF for 30 s (1.6, 3.3, and 5.0 kV/cm as US + PEF 1, US + PEF 3, and US + PEF 5, respectively) significantly reduced cooking losses (up to 28.78 %), potentially improving the product yield. Although US + PEF significantly (p < 0.05) affected pH, particularly at a higher PEF intensity (5 kV/cm), the overall color appearance of the treated meat remained unchanged. The combined treatments resulted in a tenderizing effect and decreased meat hardness, adhesiveness, and chewiness. Interestingly, US + PEF with increasing PEF intensity (1.6 to 5.0 kV/cm) led to a gradual increase in taste-related amino acids (aspartic acid, glutamic acid, etc.), potentially enhancing flavor. FTIR spectra revealed alterations in protein and lipid structures following treatment, suggesting potential modifications in meat quality. Scanning electron microscopy (SEM) revealed significant changes in the texture and structure of US + PEF-treated meat, depicting structural disruptions. Furthermore, Pearson's correlation analysis and principal component analysis (PCA) revealed a clear relationship between the physicochemical characteristics, free amino acids, color, and texture attributes of chicken meat. By optimizing treatment parameters, US + PEF could offer a novel approach to improve chicken breast meat quality.

Intranasal Delivery of Carvedilol- and Quercetin-Encapsulated Cationic Nanoliposomes for Cardiovascular Targeting: Formulation and In Vitro and Ex Vivo Studies

Carvedilol (CVD), an adrenoreceptor blocker, is a hydrophobic Biopharmaceutics Classification System class II drug with poor oral bioavailability due to which frequent dosing is essential to attain pharmacological effects. Quercetin (QC), a polyphenolic compound, is a potent natural antioxidant, but its oral dosing is restricted due to poor aqueous solubility and low oral bioavailability. To overcome the common limitations of both drugs and to attain synergistic cardioprotective effects, we formulated CVD- and QC-encapsulated cationic nanoliposomes (NLPs) in situ gel (CVD/QC-L.O.F.) for intranasal administration. We designed CVD- and QC-loaded cationic nanoliposomal (NLPs) in situ gel (CVD/QC-L.O.F.) for intranasal administration. In vitro drug release studies of CVD/QC-L.O.F. (16.25%) exhibited 18.78 ± 0.57% of QC release and 91.38 ± 0.93% of CVD release for 120 h. Ex vivo nasal permeation studies of CVD/QC-L.O.F. demonstrated better permeation of QC (within 96 h), i.e., 75.09% compared to in vitro drug release, whereas CVD permeates within 48 h, indicating the better interaction between cationic NLPs and the negatively charged biological membrane. The developed nasal gel showed a sufficient mucoadhesive property, good spreadability, higher firmness, consistency, and cohesiveness, indicating suitability for membrane application and intranasal administration. CVD-NLPs, QC-NLPs, and CVD/QC-NLPs were evaluated for in vitro cytotoxicity, in vitro ROS-induced cell viability assessment, and a cellular uptake study using H9c2 rat cardiomyocytes. The highest in vitro cellular uptake of CVD/QC-cationic NLPs by H9c2 cells implies the benefit of QC loading within the CVD nanoliposomal carrier system and gives evidence for better interaction of NLPs carrying positive charges with the negatively charged biological cells. The in vitro H2O2-induced oxidative stress cell viability assessment of H9c2 cells established the intracellular antioxidant activity and cardioprotective effect of CVD/QC-cationic NLPs with low cytotoxicity. These findings suggest the potential of cationic NLPs as a suitable drug delivery carrier for CVD and QC combination for the intranasal route in the treatment of various cardiovascular diseases like hypertension, angina pectoris, etc. and for treating neurodegenerative disorders.

A comprehensive study of sous-vide cooked Korat chicken breast processed by various conditions: texture, compositional/structural changes, and consumer acceptance

Korat chicken (KC) is a slow-growing crossbreed renowned for its excellent growth and firm texture. This study investigated the effect of various sous-vide (SV) conditions (60 and 70°C, 1-3 h) on their texture, protein structure and degradation, as well as consumer acceptability, with the traditional boiling served as control. Texture showed significant improvement under all SV conditions compared to the control, as demonstrated by increased water holding capacity (WHC), cooking loss, and decreased shear force, hardness, and chewiness (P < 0.05). These changes corresponded to the higher sensory scores (P < 0.05). Among the SV samples, increased temperatures and longer cooking times led to higher degradation of myofibrils and connective tissue, as evidenced by a decrease in water-, salt-soluble proteins, and soluble collagen (P < 0.05). These findings aligned with the scanning electron microscopy (SEM) results, which showed a looser muscle structure in the meat under more intense cooking conditions. Based on synchrotron radiation-based Fourier transform infrared (SR-FTIR) results, a gradual increase in antiparallel forms within the amide I bands (1,700-1,600 cm-1) of the total spectra with higher temperature and longer cooking times was observed (P < 0.05), while the fluctuations were observed in the changes of α-helix, β-sheet, and β-turn structures. This suggested that the antiparallel structure represented a looser configuration developing during intense SV cooking. Combined with the principal component analysis (PCA) results, the findings indicated that the suitable SV condition for KC breast meat was 70°C for varying durations (1-3 h), as it showed the strongest correlation with sensory scores, particularly in terms of tenderness. In summary, these findings provided a better understanding of molecular changes and discovered SV conditions to enhance the texture quality of the KC meat.

Enhancing chicken breast meat quality through ultrasonication: Physicochemical, palatability, and amino acid profiles

Ultrasonication, a technology that employs high-frequency sound waves, has demonstrated potential for modifying the properties of various food items. However, the effect of ultrasonication on chicken meat, particularly concerning amino acid composition and flavor enhancement, has not been sufficiently investigated. The objective of this research was to bridge the gap in the literature by exploring the impact of various ultrasonic treatments at varying power levels (300, 500, and 800 W) and durations (10 and 30 min) on the physicochemical characteristics, texture, and amino acid profile of chicken breast meat, with a focus on improving its palatability and flavor. The results indicated that ultrasonication reduced the pH and cooking loss, as well as hardness and chewiness while simultaneously increasing lightness and yellowness values of chicken breast meat. Moreover, ultrasonication enhanced the amounts of essential amino acids, including glutamic acid, alanine, and glycine as well as the free amino acid content, which gives meat its savory and umami flavor. Furthermore, the results demonstrated significant changes in the texture and structure, as demonstrated by the scanning electron microscopy (SEM) images, and in chemical makeup of chicken breast meat, as indicated by the FTIR spectra. These modifications in the molecular and microstructural characteristics of meat, as induced by ultrasonication, may contribute to the enhancement of tenderness, juiciness, and overall palatability.

Comparison of stiffness, elasticity and resilience values of ACL with autografts used instead of ACL in terms of texture analysis

Background

Anterior cruciate ligament (ACL) ruptures are one of the most extensively studied injuries in the field of orthopedics, but despite the extensive research, graft selection for ACL reconstruction remains a matter of debate. The present study aims to evaluate the stiffness and elasticity of native ACLs using texture profile analysis and compare results with those of autografts used in ACL reconstruction.

Methods

Included in the study were dissected 12 cadavers from which grafts were recovered. The graft characteristics, such as stiffness, elasticity and resilience, were measured using a TA.XT Plus Texture Analyzer.

Findings

Among the grafts studied, Achilles' tendon graft (0.70; 0.64) had the highest resilience in both males and females, while the greatest elasticity was identified in the patellar tendon graft (Male: 93 %; Female: 94 %) in all subjects. The highest stiffness value in males was recorded for the quadriceps tendon graft (2928.76 N), while the highest stiffness value in females was recorded for Achilles' tendon graft (2204.61 N).

Interpretation

According to the study data, the autografts that may be considered as an alternative to ACL were, listed in order of strength from high to low, the quadriceps, Achilles', patella and hamstring tendons in men, and the Achilles', quadriceps, patellar and hamstring tendons in women. It is worthy of note that the hamstring tendon graft, which is the most frequently preferred autograft in ACL reconstruction, was found to be the lowest in all parameters in both groups.

Formulation and characterization of 3D printed chickpea protein isolate-mixed cereal dysphagia diet

The feasibility study of making 3D printed dysphagia diet was undertaken. A mixture of corn flour and buckwheat flour was used as the model cereal and chickpea protein isolate (CPI) was used as the model protein. Printing gels (inks) of the mixed cereal (control) and CPI-cereal mixture were produced by heating the formulations at 95 °C for 30 min and then cooling them to room temperature. The results showed that all the ink formulations containing CPI had higher apparent viscosity, preferable shear thinning behavior and shape supporting characteristics than that of the control. The cohesiveness and shape supporting ability of 10%CPI-cereal and 20%CPI-cereal formulations were poor and could not produce stable printing shape. The 30%CPI-cereal and 40%CPI-cereal formulations had suitable apparent viscosity, shear thinning behavior, storage modulus, yield stress and printing accuracy and the 3D printed products were stable. The control ink and 10%CPI-cereal ink had low cohesion and also could not pass the spoon tilt test. The 50%CPI-cereal formulation had high hardness and also could not pass the fork pressing test. The 30 % to 40 % CPI-cereal formulations were found to be suitable as dysphagia products as they could be classified as level 5 dysphagia diet.

Effects of Sous-Vide on Quality, Structure and Flavor Characteristics of Tilapia Fillets

To investigate the effects of traditional high-temperature cooking and sous-vide cooking on the quality of tilapia fillets, muscle microstructure, texture, lipid oxidation, protein structure, and volatile compounds were analyzed. In comparison with samples subjected to traditional high-temperature cooking, sous-vide-treated samples exhibited less protein denaturation, a secondary structure dominated by α-helices, a stable and compact structure, a significantly higher moisture content, and fewer gaps in muscle fibers. The hardness of the sous-vide-treated samples was higher than that of control samples, and the extent of lipid oxidation was significantly reduced. The sous-vide cooking technique resulted in notable changes in the composition and relative content of volatile compounds, notably leading to an increase in the presence of 1-octen-3-ol, α-pinene, and dimethyl sulfide, and a decrease in the levels of hexanal, D-limonene, and methanethiol. Sous-vide treatment significantly enhanced the structural stability, hardness, and springiness of muscle fibers in tilapia fillets and reduced nutrient loss, enriched flavor, and mitigated effects on taste and fishy odor.

Behaviour of texture-modified meats using proteolytic enzymes during gastrointestinal digestion simulating elderly alterations

This study aimed to apply different proteolytic enzymes (bromelain, papain, and flavourzyme) to develop texture-modified meats suitable for people with chewing or swallowing problems. The samples were categorised at level 6 (soft and bite-sized food) of the dysphagia diet, characterised in terms of physicochemical and textural parameters, and evaluated for their behaviour during gastrointestinal digestion simulating elderly alterations. In general, the enzyme-treated samples had lower moisture content, weight, and diameter of the piece of meat, and presented colour differences compared to the control samples. Textural analyses did not show significant differences in terms of hardness and cohesiveness for the texture-modified meats, while flavourzyme-treated samples presented less elasticity. Instrumental mastication assay showed the breakdown of samples' structure mainly during the first mastication cycles, with flavourzyme-treated samples presenting slightly higher consistency. The protein digestibility of the meats greatly increased after simulated gastrointestinal digestion, but a decrease in proteolysis for the control and papain-treated samples in the altered gastric model and an increase for flavourzyme-treated samples in the altered both gastric and intestinal model were shown compared to standard conditions. These results allow integrating knowledge to design foods that better meet the requirements of dysphagics or elderly people.

Different methods for textural evaluation of freeze-dried candies during storage

The textural changes during storage of two freeze-dried candies developed from blackcurrant fruits, unflavored yogurt, and different alternative sweeteners, one sweetened with honey/isomalt (HI) and another sweetened with isomalt/stevia (IS), were analyzed using three different methods (instrumental, sensory, and image analysis). Fresh candies were in the supercooled state and presented different structural and textural characteristics (HI: compact and homogeneous, and IS: porous and crunchy), with Fmax values of 139 ± 14 and 174 ± 16 N for HI and IS, respectively. After storage, the instrumental analysis showed approximately 60% average drop in Fmax and W values, in agreement with the decrease observed by sensory analysis in hardness, fracturability, and crispness. Image analysis showed an increase in parameters related to the homogeneity and the uniformity/smoothness for HI. Pearson's correlation coefficients analysis showed that there was a good correlation between the three techniques used, suggesting that the joint use of these methods could be performed for a better understanding of complex food texture.

Pickering Emulsion Stabilized by β-Cyclodextrin and Cinnamaldehyde/β-Cyclodextrin Composite

A Pickering emulsion was prepared using β-cyclodextrin (β-CD) and a cinnamaldehyde (CA)/β-CD composite as emulsifiers and corn oil, camellia oil, lard oil, and fish oil as oil phases. It was confirmed that Pickering emulsions prepared with β-CD and CA/β-CD had good storage stability. The rheological experiments showed that all emulsions had G' values higher than G″, thus confirming their gel properties. The results of temperature scanning rheology experiments revealed that the Pickering emulsion prepared with β-CD and CA/β-CD composites had high stability, in the range of 20-65 °C. The chewing properties of Pickering emulsions prepared by β-CD and corn oil, camellia oil, lard, and herring oil were 8.02 ± 0.24 N, 7.94 ± 0.16 N, 36.41 ± 1.25 N, and 5.17 ± 0.13 N, respectively. The chewing properties of Pickering emulsions made with the CA/β-CD composite and corn oil, camellia oil, lard, and herring oil were 2.51 ± 0.05 N, 2.56 ± 0.05 N, 22.67 ± 1.70 N, 3.83 ± 0.29 N, respectively. The texture properties confirmed that the CA/β-CD-composite-stabilized-emulsion had superior palatability. After 28 days at 50 °C, malondialdehyde (MDA) was detected in the emulsion. Compared with the β-CD and CA + β-CD emulsion, the CA/β-CD composite emulsion had the lowest content of MDA (182.23 ± 8.93 nmol/kg). The in vitro digestion results showed that the free fatty acid (FFA) release rates of the CA/β-CD composite emulsion (87.49 ± 3.40%) were higher than those of the β-CD emulsion (74.32 ± 2.11%). This strategy provides ideas for expanding the application range of emulsifier particles and developing food-grade Pickering emulsions with antioxidant capacity.

Chitosan Coating Functionalized with Flaxseed Oil and Green Tea Extract as a Bio-Based Solution for Beef Preservation

Ecological and safe packaging solutions arise as pivotal points in the development of an integrated system for sustainable meat production. The aim of this study was to assess the effect of a combined chitosan (Ch) + green tea extract (GTE) + essential oil (thyme oil, TO; flaxseed oil, FO; or oregano oil, OO) coating on the safety and quality of vacuum-packaged beef during storage at 4 °C. An optimized bio-based coating formulation was selected (2% Ch + 2% GTE + 0.1% FO) to be applied to three fresh beef cuts (shoulder, Sh; knuckle, Kn; Striploin, St) based on its pH (5.8 ± 0.1), contact angle (22.3 ± 0.4°) and rheological parameters (viscosity = 0.05 Pa.s at shear rate > 20 s^-1). Shelf-life analysis showed that the Ch-GTE-FO coating delayed lipid oxidation and reduced total viable counts (TVC) and Enterobacteriaceae growth compared with uncoated beef samples over five days. In addition, Ch-GTE-FO coating decreased total color changes of beef samples (e.g., ∆E* = 9.84 and 3.94, for non-coated and coated Kn samples, respectively) for up to five days. The original textural parameters (hardness, adhesiveness and springiness) of beef cuts were maintained during storage when Ch-GTE-FO coating was applied. Based on the physicochemical and microbial characterization results, the combination of the Ch-GTE-FO coating developed was effective in preserving the quality of fresh beef cuts during refrigerated storage along with vacuum packaging.

Investigating the Effect of Various Sous-Vide Cooking Conditions on Protein Structure and Texture Characteristics of Tilapia Fillet Using Synchrotron Radiation-Based FTIR

The effects of various sous-vide (SV) cooking conditions (50-60℃, 30-60 min) on physicochemical properties related to the texture characteristics, protein structure/degradation, and sensory acceptability of tilapia fillet (Oreochromis niloticus) were investigated. With an increasing temperature and processing time of SV cooking, protein degradation (of both myofibrils and connective tissue) was more pronounced, as evaluated by the decrease in water- and salt-soluble proteins, total collagen, as well as the changes in the ratio of secondary protein structures (α-helix, β-sheet, β-turn, etc.), which were determined by synchrotron-FTIR (SR-FTIR). These degradations were associated with the improvement of meat tenderness, as estimated by shear force and texture profile analyzer (TPA) results. Among all SV conditions, using 60 ℃ for 45 min seems to be the optimal condition for tilapia meat, since it delivered the best results for texture characteristics and acceptability (p < 0.05). Moreover, principal component analysis (PCA) results clearly demonstrated that the highest texture-liking score of this condition was well associated with the intensity of β-sheets, which seem to be the crucial component that affected the texture of SV-cooked tilapia more so than other parameters. The findings demonstrated the potential of SR-FTIR to decipher the biomolecular structure, particularly the secondary protein structure, of SV-cooked tilapia. This technique provided essential information for a better understanding of the changes in biomolecules related to the textural characteristics of this product.

The Effect of Weaning and Slaughter Age on the Physicochemical and Sensory Characteristics of Arouquesa Beef-A PDO Portuguese Meat

(1) Background: Autochthonous breeds meat is well accepted due to its sensory characteristics, perceived low environmental impact, and animal welfare. We aimed to evaluate the effect of weaning and slaughter age on the physicochemical and sensory characteristics of Arouquesa, a Portuguese Protected Designation of Origin (PDO) meat and to evaluate the psychological effect of knowing the weaning age on the consumer's hedonic evaluation. (2) Methods: Meat from 26 animals was assigned to 4 groups, with combinations of weaning (W) at 9 or 5 months and slaughter (S) at 9 or 12 months: W9-S9, W9-S12, W5-S9, and W5-S12. The meat was analysed for pH24h, colour (L*a*b*), cooking losses and shear force. A Check All that Apply test was made with 70 consumers; they were also asked to punctuate the hedonic appreciation of anonymous and weaning age-identified meat. (3) Results: W9-S9 were more tender, had lower shear force, and was juicier than W5-S9. When animals were slaughtered at 12 months, there were no differences in the physicochemical and sensory characteristics between the weaning ages. The effect of information about the weaning age influences the consumer's hedonic evaluation, as revealed by the comparison between the anonymous and identified samples. (4) Later weaning resulted in more tender meat when the slaughter was at 9 months and positively impacted consumer perception.

A Critical review focusing the effect of ingredients on the textural properties of plant-based meat products

Plant-based meat alternatives have been studied for decades, but have recently gained more attraction in the food industries and research communities. Concern about animal welfare, health, environment and moral beliefs acts as a driving force for the growth of plant-based meat products. The most challenging task in the development of meat analog is to imitate the texture of conventional meat products. The fabrication of plant-based meat product requires a wise selection and formulation of ingredients to perfectly mimic the fibrous structure of meat. Top-down and bottom-up approaches are the two most commonly used structuring techniques for the preparation of plant-based meat products. Development of comminuted meat product is easy as compared to the whole-muscle type plant-based meat products. Several plant-based ingredients such as texturized and non-texturized proteins, fats, binding agents, flavoring and coloring agents accompanied with different processing techniques (extrusion, shear cell, wet spinning, electrospinning, and freeze structuring) are used in the preparation of meat analogs. This paper aims to discuss the impact of ingredients on the textural properties of plant-based meat products.

Assessment of Quality Indices and Their Influence on the Texture Profile in the Dry-Aging Process of Beef

The aim of this study was to investigate the effects of the dry-aging method on the sensory properties, chemical composition, and profile parameters of the texture of beef obtained from local farms. The qualitative characteristics of the beef were investigated for five samples, respectively, fresh meat, and dry-aged beef for 14, 21, 28, and 35 days, in aging rooms with controlled parameters: temperature (1 ± 1 °C), relative humidity (80 ± 5%), and air circulation speed (0.5–2 m/s). During the dry-aging period, there was a decrease in humidity by about 6.5% in the first 21 days, which allowed the concentration of fat, protein, and total collagen content. The dry-aging process considerably influenced the pH value of the meat, which, in the second part of the dry-aging process (14–35 days), increased from 5.49 to 5.66. These values favored the increase by 37.33% of the water retention capacity and the activation of the meat’s own enzymes (calpain, cathepsin, collagenase). This influenced the solubilization process of proteins and collagen, thus contributing to the improvement of the texture profile. Because variations in organoleptic and physicochemical parameters occurred simultaneously during dry-aging and storage, the method of analyzing the information was applied. Mutual information on the influence of physicochemical indicators on the texture profile parameters was followed, a factor of major importance in the consumer’s perception. The degree of influence of soluble proteins, sarcoplasmic and myofibrillar proteins, fats, and soluble collagen content on the texture profile parameters (hardness, cohesiveness, springiness, gumminess, and chewiness) of the dry-aged beef for 35 days was established. These investigations allowed the optimization of the beef dry-aging technological process in order to obtain a product with a sensory profile preferred by the consumer.

Instrumental and sensory techniques to characterize the texture of foods suitable for dysphagic people: A systematic review

The interest to characterize texture-modified foods (TMFs) intended for people with oropharyngeal dysphagia (OD) has grown significantly since 2011. Several instrumental and sensory techniques have been applied in the analysis of these foods. The objective of the present systematic review was to identify the most appropriate techniques, especially for the food industry and clinical setting. The search was carried out in three online databases according to the "Preferred Reporting Items for Systematic Reviews and Meta-Analyses" (PRISMA). Across the multiple trials reviewed, Texture Profile Analysis and the Uniaxial Compression Test were most used as the instrumental technique for solid foods, and the Back Extrusion Test for fluid and semisolid foods. All trials used descriptive analysis as the sensory technique. However, the experimental conditions of the trials lacked standardization. Consequently, the results of the trials were not comparable. To properly characterize the texture of TMFs intended for OD by each technique, an international consensus is needed to establish standardized experimental conditions. Methods based on these techniques should also be validated by collaborative studies to verify repeatability, replicability, and reproducibility.