The Variation of the Pelvis in Unilateral Crowe Type IV Developmental Dysplasia of the Hip

Morphological and bone defect mapping analysis of true acetabulum in Crowe type IV hip dysplasia

BACKGROUND

The primary aim of this study was to quantitatively analysis the acetabular morphological feature and 2D/3D coverage of the Crowe IV DDH hip, dividing into subgroups by the false acetabulum. The secondary aim was to propose a 3D bone mapping to determine acetabular bone defect analysis from the perspective of the implanted simulation.

METHODS

A total of 53 Crowe IV hips (27 hips without the false acetabulum in IVa group and 26 hips in IVb group) and 40 normal hips met the inclusion criteria and were retrospectively evaluated. Firstly, the anatomical size and volume of the acetabulum were measured quantitatively. Secondly, through the simulated implantation, morphological assessments of the true acetabulum included Cup-CE, Cup-Sharp, acetabular anteversion angle, and thickness of the medial wall. Last, Acetabular sector angles (ASAs) and the component coverage ratio were measured to provide coverage indices. Further, 3D bone mapping visualization was applied to determine the uncovered component portion distribution.

RESULTS

The anatomic shape and volume of the acetabular triangle were significantly smaller in Crowe IV hips. At the level of the acetabular component center, IVb acetabula were found to be more anteverted and abductive, with smaller Cup-CE and larger Cup-Sharp angles. The coverage sector angles in Crowe IVa hips were larger in the anterosuperior and superior direction, while smaller in the posterosuperior and posterior direction, with no subgroup difference in total component coverage. Both 3D bone mapping and correlation analysis reveal that posterosuperior and posterior bone stock is highly associated with the component coverage.

CONCLUSION

With the presence of the false acetabulum, there existed acetabular anteversion and segmental coverage distinctions between subgroups. During the acetabular reconstruction, management of posterosuperior and posterior bone stock was important for ideal component coverage.

A novel method for assigning bone material properties to a comprehensive patient-specific pelvic finite element model using biplanar multi-energy radiographs

The increasing prevalence of adult spinal deformity requires long spino-pelvic instrumentation, but pelvic fixation faces challenges due to distal forces and reduced bone quality. Bi-planar multi-energy X-rays (BMEX) were used to develop a patient-specific finite element model (FEM) for evaluating pelvic fixation. Calibration involved 10 patients, and an 81-year-old female test case was used for FEM customization and pullout simulation validation. Calibration yielded a root mean square error of 74.7 mg/cm3 for HU. The simulation accurately replicated the experimental pullout test with a force of 565 N, highlighting the method's potential for optimizing biomechanical performance for pelvic fixation.

Total hip arthroplasty with porous tantalum trabecular metal pads in patients with Crowe IV developmental dysplasia of the hip: a midterm followup study

PURPOSE

Crowe IV developmental dysplasia of the hip (DDH) is a catastrophic hip disease. Moreover, obtaining ideal clinical efficacy in conventional total hip arthroplasty (THA) is often difficult. In this study, we aimed to assess the mid-term clinical results of THA with porous tantalum trabecular metal (TM) pads for acetabular reconstruction in the treatment of Crowe IV DDH.

METHODS

A cohort of 28 patients (32 hips) diagnosed with Crowe type IV DDH who underwent acetabular reconstruction during THA using TM pads with scheduled follow-up between 2011 and 2018, were included in this study. Eight cases were men and 24 were women, with a mean age of 48.4 years (range, 36-72 years) and a mean follow-up was 74.3 months (range, 42-132 months). All patients underwent acetabular reconstruction using TM pads and total hip replacement with subtrochanteric osteotomy.

RESULTS

At the final follow-up, 28 hips (87.5%) demonstrated mild or no postoperative limping. The Harris Hip Score improved from 58.4 ± 10.6 preoperatively to 85.6 ± 8.9. The mean pain, stiffness, and function scores on the Western Ontario and McMaster University Osteoarthritis index were 86.5 ± 10.2, 87.3 ± 12.4 and 85.4 ± 11.6 respectively. The mean score of patient satisfaction was 90.4 ± 7.6. Additionally, the SF-12 physical summary score was 41.8 ± 5.6 and the SF-12 mental summary score was 51.6 ± 5.4. TM construct survivorship due to all-cause failure was 90.6% at 5 years with 3 hips at risk, 87.5% at 10 years with 4 hips at risk. The survivorship due to failure from aseptic loosening was 96.9% at 5 years with 1hips at risk and 93.75% at 10 years with 2 hips at risk.

CONCLUSION

This study demonstrated satisfactory mid-term clinical and radiological results with the application of TM pads for acetabular reconstruction combined with THA in patients with Crowe IV DDH.

TRIAL REGISTRATION NUMBER

ChiCTR1800014526, Date: 18/01/2018.

Evaluation of iliac morphology and innominate bone rotation in unilateral developmental dysplasia of the hip

Three-dimensional assessments of unilateral developmental dysplasia of the hip (DDH) have not been performed yet. Using computed tomography scanning, this study aimed to determine the morphological and rotational abnormalities of the innominate bone in female patients with unilateral DDH. Patients with unilateral and bilateral DDH were compared with healthy patients. The distances between two points along each anatomical part of the pelvis and femur in the coronal plane were measured. The angles of each measurement line for the anterior pelvic plane (APP) and its perpendicular axis were investigated in the sagittal and horizontal planes. The distance between the acetabular centre and anterior inferior iliac spine was longer on both sides in the unilateral DDH group than in the bilateral DDH group. Values of several angles measured on the APP in the horizontal or sagittal plane differed between the unilateral DDH and bilateral healthy groups. The distance between the centres of the femoral head was longer in the unilateral DDH group than in the bilateral healthy group. The distance between the femoral head and middle of the pelvis was longer on the affected side than on the unaffected side in the unilateral DDH group. The iliac bone morphology was similar in both unilateral DDH and bilateral healthy groups; the rotation of the innominate bone was comparable to that in bilateral DDH. The femoral head on the affected side was shifted more laterally than that on the unaffected side in unilateral DDH.

Automated assessment of pelvic radiographs using deep learning: A reliable diagnostic tool for pelvic malalignment

Pelvic malalignment leads to general imbalance and adversely affects leg length. Timely and accurate diagnosis of pelvic alignment in patients is crucial to prevent additional complications arising from delayed treatment. Currently, doctors typically assess pelvic alignment either manually or through radiography. This study aimed to develop and assess the validity of a deep learning-based system for automatically measuring 10 radiographic parameters necessary for diagnosing pelvic displacement using standing anteroposterior pelvic X-rays. Between March 2016 and June 2021, pelvic radiographs from 1215 patients were collected. After applying specific selection criteria, 550 pelvic radiographs were chosen for analysis. These data were utilized to develop a deep learning-based system capable of automatically measuring radiographic parameters relevant to pelvic displacement diagnosis. The system's diagnostic accuracy was evaluated by comparing automatically measured values with those assessed by a clinician using 200 radiographs selected from the initial 550. The results indicated that the system exhibited high reliability, accuracy, and reproducibility, with a Pearson correlation coefficient of ≥0.9, an intra-class correlation coefficient of ≥0.9, a mean absolute error of ≤1 cm, mean square error of ≤1 cm, and root mean square error of ≤1 cm. Moreover, the system's measurement time for a single radiograph was found to be 18 to 20 times faster than that required by a clinician for manual inspection. In conclusion, our proposed deep learning-based system effectively utilizes standing anteroposterior pelvic radiographs to precisely and consistently measure radiographic parameters essential for diagnosing pelvic displacement.

Total Hip Arthroplasty in Patients with Crowe III/IV Developmental Dysplasia of the Hip: Acetabular Morphology and Reconstruction Techniques

The severe anatomic deformities render acetabular reconstruction as one of the greatest challenges in total hip arthroplasty (THA) for patients with Crowe III/IV developmental dysplasia of the hip (DDH). Thorough understanding of acetabular morphology and bone defect is the basis of acetabular reconstruction techniques. Researchers have proposed either true acetabulum position reconstruction or high hip center (HHC) position reconstruction. The former can obtain the optimal hip biomechanics, including bulk femoral head autograft, acetabular medial wall displacement osteotomy, and acetabular component medialization, while the latter is relatively easy for hip reduction, as it can avoid neurovascular lesions and obtain more bone coverage; however, it cannot achieve good hip biomechanics. Both techniques have their own advantages and disadvantages. Although there is no consensus on which approach is better, most researchers suggest the true acetabulum position reconstruction. Based on the various acetabular deformities in DDH patients, evaluation of acetabular morphology, bone defect, and bone stock using the 3D image and acetabular component simulation techniques, as well as the soft tissue tension around the hip joint, individualized acetabular reconstruction plans can be formulated and appropriate techniques can be selected to acquire desired clinical outcomes.

Change of Pelvic Sagittal Tilt after Total Hip Arthroplasty in Patients with Bilateral Crowe Type IV Developmental Dysplasia of the Hip

Objective

To explore and analyze the change of pelvic sagittal tilt (PST) after total hip arthroplasty (THA) in patients with bilateral Crowe type IV developmental dysplasia of the hip (DDH).

Methods

The study retrospectively evaluated 43 patients with bilateral Crowe type IV DDH undergoing THA from January 2008 to June 2019 who were followed up for 12 months postoperatively. Four parameters, including the ratio between the height and width of the obturator foramina(H/W ratio), the vertical distance between the upper edge of the symphysis and the middle of the sacrococcygeal joint (SSc distance), the vertical distance between the upper edge of the symphysis and the line connecting bilateral hip centers (SC distance) and the vertical distance between the upper edge of the symphysis and the line connecting the bilateral lower ends of the sacroiliac joints (SSi distance), which could indirectly reflect the change of PST, were observed and measured by radiographs. The change of each parameter before operation, immediately after operation, and in 3, 6 and 12 months postoperatively was compared and analyzed.

Results

Compared with the value before operation, the H/W ratio immediately after operation and in 3, 6 and 12 months postoperatively were 0.61 ± 0.12 (t = 0.893, P = 0.377), 0.61 ± 0.11 (t = 1.622, P = 0.112), 0.67 ± 0.10 (t = 5.995, P < 0.001) and 0.76 ± 0.12 (t = −9.313, P < 0.001), respectively, and the SSc, SC and SSi distance in 6 months postoperatively were 30.12 ± 7.06 mm (t = 3.506, P = 0.002), 42.8 ± 7.7 mm (t = 5.843, P < 0.001), 129.3 ± 12.6 mm (t = 5.888, P < 0.001), respectively, and in 12 months postoperatively were 27.24 ± 7.68 mm (t = 6.510, P < 0.001), 36.1 ± 9.1 mm (t = 9.230, P < 0.001), 118.9 ± 14.9 mm (t = 8.940, P < 0.001), respectively. The radiographs obtained in 6 and 12 months postoperatively demonstrated a significantly increased H/W ratio and decreased SSc, SC and SSi distance. At the last follow‐up, the clinical evaluations significantly improved in all patients and there were no revisions.

Conclusion

The significant change of pelvic sagittal posterior tilt in patients with bilateral Crowe type IV DDH might be a significant phenomenon after THA, which could occur in 6 months postoperatively.

[Artificial intelligence assisted total hip arthroplasty for patients with Crowe type developmental dysplasia of the hip]

Objective

To investigate the early effectiveness of artificial intelligence (AI) assisted total hip arthroplasty (THA) system (AIHIP) in the treatment of patients with Crowe type Ⅳ developmental dysplasia of the hip (DDH).

Methods

The clinical data of 23 patients with Crowe type Ⅳ DDH who met the selection criteria between May 2019 and December 2020 were retrospectively analyzed. There were 3 males and 20 females, the age ranged from 44 to 74 years, with an average of 52.65 years. The absolute value of the lower limbs discrepancy before operation was (15.17±22.17) mm. The preoperative Harris score was 62.4±7.2. The AIHIP system was used for preoperative planning, and the operations were all performed via conventional posterolateral approach. Thirteen patients with difficulty in reduction during operation underwent subtrochanteric shortening osteotomy (SSOT). The operation time, hospital stay, and adverse events were recorded; Harris score was used to evaluate the function of the affected limb at 1 day before operation and 1 week and 6 months after operation; pelvic anteroposterior X-ray film was taken at 1 day after operation to evaluate the position of the prosthesis. The matching degree of prosthesis was evaluated according to the consistency of intraoperative prosthesis model and preoperative planning.

Results

The matching degree of acetabular cup model after operation was 16 cases of perfect matching, 4 cases of general matching (1 case of +1, 3 cases of -1), and 3 cases of mismatch (all of them were +2), the coincidence rate was 86.96%. The matching degree of femoral stem model was perfect matching in 22 cases and general matching in 1 case of -1, and the coincidence rate was 100%. One patient had a periprosthesis fracture during operation, and was fixed with a wire cable during operation, and walked with the assistance of walking aid at 6 weeks after operation; the rest of the patients walked with the assistance of walking aid at 1 day after operation. The operation time was 185-315 minutes, with an average of 239.43 minutes; the hospital stay was 8-20 days, with an average of 9.96 days; and the time of disengagement from the walking aid was 2-56 days, with an average of 5.09 days. All patients were followed up 6 months. All incisions healed by first intension, and there was no complication such as infection, dislocation, refracture, and lower extremity deep venous thrombosis; X-ray films at 1 day and 6 months after operation showed that the acetabular and femoral prostheses were firmly fixed and within the safe zone; the absolute value of lower limbs discrepancy at 1 day after operation was (11.96±13.48) mm, which was not significantly decreased compared with that before operation ( t=0.582, P=0.564). All osteotomies healed at 6 months after operation. The Harris scores at 1 week and 6 months after operation were 69.5±4.9 and 79.2±5.7 respectively, showing significant differences between pre- and post-operation ( P<0.05). At 6 months after operation, the hip function was evaluated according to Harris score, and 13 cases were good, 9 cases were fair, and 1 case was poor.

Conclusion

AIHIP system-assisted THA (difficult to reposition patients combined with SSOT) for adult Crowe type Ⅳ DDH has high preoperative planning accuracy, easy intraoperative reduction, early postoperative landing, and satisfactory short-term effectiveness.