Immediate vs non-immediate loading post-extractive implants: a comparative study of implant stability quotient (ISQ)

Evaluation of different surface treated implants after provisionalization: A 6-month prospective study

Background

Replacing missing teeth with dental implants has become the best treatment option; therefore, clinicians need to understand the predictability of the treatment. Surface treatment of implants is one of the methods to improve osseointegration, thus improving the quality of treatment. Increasing esthetic awareness among patients has led to the popularity of immediate provisionalization of dental implants. This study investigated the effect of surface treatment on implant stability when loaded with immediate non-functional temporary prostheses and compared the superiority of one surface treatment over the other in terms of osseointegration by evaluating implant stability quotient (ISQ).

Methods

Twenty implants with different surface treatments were placed, i.e., resorbable blast media (RBM) surface and alumina blasted/acid-etched (AB/AE) surfaces. All the implants were non-functionally loaded, and ISQ was measured immediately after implant placement and 6 and 12 weeks after non-functional loading. Crestal bone levels, mPI, mSBI, and peri-implant probing depths were compared for both groups at 1, 3, and 6 months.

Results

At 12 weeks, all the implants showed desirable ISQ, indicating successful osseointegration. The increase in ISQ at 12 weeks was significantly higher for RBM implants compared to baseline, indicating a more predictable course of osseointegration. Crestal bone levels recorded at 1, 3, and 6 months did not significantly differ between the groups. All other parameters showed comparable values for both groups at all intervals.

Conclusion

Replacing missing teeth with dental implants with immediate non-functional restorations is a predictable treatment option.

Selection criteria for immediate implant placement and immediate loading for single tooth replacement in the maxillary esthetic zone: A systematic review and meta-analysis

OBJECTIVES

The aim of this study was to review available evidence for Type 1A (immediate implant placement and immediate loading) of single tooth replacement in the maxillary esthetic zone.

MATERIALS AND METHODS

An electronic search was conducted utilizing the databases of MEDLINE, Embase, and Cochrane to identify publications reporting on the outcomes of Type 1A for single tooth replacement in the maxillary esthetic zone. The success and survival rates of the included articles were reported, which were further categorized according to the clinical criteria reported in Type 1A. Mean survival rates were univariately compared between risk groups and additionally between studies published before and since 2012 using bias-corrected and study size-weighed bootstrap tests. A study time-correcting meta-analysis was then performed to obtain an overall effect for the study pool.

RESULTS

A total of 3118 publications were identified in the search, with a total of 68 articles included. A mean number of implants per study were 37.2 and mean follow-up was 2.8 years. All the included studies utilizing Type 1A report highly selective inclusion and exclusion criteria. Univariate risk group comparison determined that studies before 2012 report a significantly lower mean survival rate (difference of -1.9 percentage points [PP], 95% CI: [-0.3, -4.0], p = .02), facial gap dimension had an impact on survival rates (+3.1 PP [0.2, 5.3] for width >2 mm, p = .04), as well as presence of endodontic infection (+2.6 PP [0.9, 5.1], p = .004).

CONCLUSIONS

Type 1A has a high survival rate in studies reporting strict patient and site selection criteria. Further research is required to assess esthetic and functional success with Type 1A treatments.

Confirmation of Calcium Phosphate Cement Biodegradation after Jawbone Augmentation around Dental Implants Using Three-Dimensional Visualization and Segmentation Software

The use of autologous bone graft for oral rehabilitation of bone atrophy is considered the gold standard. However, the available grafts do not allow a fast loading of dental implants, as they require a long healing time before full functionality. Innovative bioactive materials provide an easy-to-use solution to this problem. The current study shows the feasibility of calcium phosphate cement paste (Paste-CPC) in the sinus. Long implants were placed simultaneously with the cement paste, and provisional prosthetics were also mounted in the same sessions. Final prosthetics and the full loading took place within the same week. Furthermore, the study shows for the first time the possibility to monitor not only healing progression using Cone Beam Computer tomography (CBCT) but also material retention, over two years, on a case study example. The segmented images showed a 30% reduction of the cement size and an increased mineralized tissue in the sinus. Mechanical testing was performed qualitatively using reverse torque after insertion and cement solidification to indicate clinical feasibility. Both functional and esthetic satisfaction remain unchanged after one year. This flowable paste encourages the augmentation procedure with less invasive measure through socket of removed implants. However, this limitation can be addressed in future studies.

Fractal analysis as a useful predictor for determining osseointegration of dental implant? A retrospective study

PURPOSE

The present study aimed at evaluating the effectiveness of fractal analysis on determining the osseointegration of dental implants.

MATERIAL AND METHODS

In a single center, retrospective clinical trial, patients with dental implants in the mandibular premolar/molar region, ASA I-II and < 65-year-old patients were included. Orthopantomograph (OPG) were taken before implant surgery (t0), within a week of surgery (t1), and 1 (t2) and 2 (t3) months after surgery, respectively. Three regions of interest (ROIs) from mesial, distal, and apical sites of the implants were chosen and fractal analysis (FA) was conducted with the box-counting algorithm using White and Rudolph's method.

RESULTS

A total of 39 patients 19 women and 20 men, with a mean age of 52.2 years (52.3 and 52.1 years, respectively) were included. The mean, minimum and maximum values of mesial (roi1), distal (roi2), and apical (roi3) surfaces were compared. The fractal dimension (FD) values of t1 were significantly lower compared with t0 as they decreased during the first week. FD values gradually increased after the first week although never exceeded the FD values of t0. Also, difference between mean FD values of t0 and t3 were found statistically significant (p < 0.05).

DISCUSSION

FA is a promising and noninvasive method to predict osseointegration of a dental implant based on dental radiographs, and it can help shorten the total treatment time.

Influence of Resonance Frequency Analysis (RFA) Measurements for Successful Osseointegration of Dental Implants During the Healing Period and Its Impact on Implant Assessed by Osstell Mentor Device

AIM

This study aimed to investigate and assess primary and secondary dental implant stability during the osseointegration period.

METHODS

A total of 77 implants were placed in 42 patients with 26 males and 16 females. The study was conducted by comparing the resonance frequency analysis (RFA) values of the implants inserted in the lower jaw. RFA was done immediately after implant insertion and after 12 weeks. Results were statistically evaluated using SPSS Statistics for Windows, Version 7.1. Level of significance was set at P < 0.05.

RESULTS

Significant differences were detected between the primary and secondary stability values, respectively. Maximum RFA value of 88 and the minimum value of 52 were observed. Stability values increased during the following three months, and all implants were successfully integrated without complication.

CONCLUSION

Our results indicate and suggest that there is a strong linear correlation between implant stability and ISQ values that can be directly estimated by the RFA, especially in the posterior edentulous mandible. Osstell implant device could represent a useful tool which can be used to identify the risk for implant failure.

Post extractive implant: evaluation of the critical aspects

Purpose

Nowadays, implant supported prosthetic rehabilitation is a reliable procedure to replace compromised or untreatable teeth. The purpose of this review is to explore the concept of post extractive implant and the indications for clinical practice through an analysis of recent studies in the literature. All the main factors that could influence the outcome of this treatment will also be considered.

Materials and methods

Focusing on the extraction-socket healing time, three different implant insertion protocols have been defined: Immediate implant placement (IIP), Early implant placement (EIP), Delayed implant placement (DIP). The entity of bone remodeling can be associated with different factors: three dimensional implant position, presence/absence of platform switching, absence of facial bony wall, inter implant/tooth distance.

Results

All the studies in literature agreed that implant primary stability is the main condition for a successful osseointegration of dental implants. Primary implant stability is influenced by many factors including local bone quality and quantity, implant macro-design, soft tissue conditions and rehabilitation, surgical technique, prosthetic load timing, oral hygiene.

Conclusions

There is insufficient evidence in literature to determine possible advantages or disadvantages of IIP, EIP or DIP. Studies suggest that IIP and EIP may be at higher risks of implant failures and complications than delayed implants; on the other hand the aesthetic outcome might be better when placing implants just after teeth extraction.

Immediate loading implants: review of the critical aspects

Purpose

Modern dentistry have witnessed, a rapid and continuing evolution. Concerning the implant-rehabilitation protocols, they have been redefined in order to satisfy patient's increasing expectations in terms of comfort, aesthetic and shorter treatment period. The purpose of this review is to explore the concept of implant immediate loading and the indications for clinical practice. All the critical aspects that could influence the outcomes of this treatment will also be considered.

Materials and methods

Three protocols for implant load timing have been classified: immediate loading implants (ILI); early loading implants (ELI); and conventional loading implants (CLI). Two subclassifications point out the different loading modality: 1) Occlusal loading or Non-Occlusal loading, 2) Direct loading or Progressive loading. Micromovements have been considered, since the start of implant dentistry, one of the main risk for the success of osseointegration. The determinant and most accessible parameter to assess the primary stability is the implant insertion torque value. To achieve the necessary torque value to perform immediate loading, it is therefore important to evaluate the bone density at the implant site. Computerized tomography (CT) has been regarded as the best radiographic method to evaluate the residual bone.

Results

The clinical success of this technique is highly dependent on many factors: patient selection, bone quality and quantity, implant number and design, implant primary stability, occlusal loading and clinician's surgical ability. Among these, implant primary stability is undoubtedly the most important.

Conclusion

Studies on ILI show that successful outcome can be expected, if the previous criteria are fulfilled. It seems that ILI demonstrate a greater risk for implant failure when compared to CLI, although the survival rates were high for both the procedures. The use of different surgical procedures, type of prostheses, loading times and have very different study designs. This lack of homogeneity limits the relevance of the conclusions that can be drawn.

Ultrasound and analysis of the deformation patterns of the masseter muscle: comparing surgical anatomy, ultrasound and functional anatomy

PURPOSE

We have tried to demonstrate whether the analysis of the muscle strain allows us to identify the three distinct functional areas of the architecture of the masseter, as one would see them by performing or viewing an anatomical dissection of said muscle, and whether these sections have behave differently in terms of origin and coping of the strain they face (quantitative analysis).

MATERIALS AND METHODS

This work has been elaborated by the use of an ultrasound machine (MicrUs ext-1H Telemed Medical Systems Milano) and a linear probe (L12-5l40S-3 5-12 MHz 40 mm) which allowed us to record a 45 frame per second video (DCM). Videos has been elaborated by use of an ultrasound machine (MicrUs ext-1H Telemed Medical Systems Milano) and a linear probe (L12-5l40S-3 5-12 MHz 40 mm) which allowed us to record a 45 frame per second video (DCM). We applied to the resulting video a software (Mudy 1.7.7.2 AMID Sulmona Italy) for the analysis of muscle deformation patters (contraction, dilatation, cross-plane, vertical strain, horizontal strain, vertical shear, horizontal shear, horizontal displacement, vertical displacement). The number of videos of masseter muscles in contraction at maximum exertion due to dental clenching made during this research is around 12,000. Out of these we chose 1,200 videos which examine 200 patients (100 females, 100 males).

RESULTS

The deformation pattern analysis of the skeletal muscle on ultrasound basis seems to be an adequate instrument to use during the investigation of the functional structure of the masseter muscle given its ability to highlight the distinct activity of each separate part of the muscle.

CONCLUSIONS

Moreover the strain does not apply to the muscle uniformly; instead it varies according to the observed area.

Implant Dentistry: Monitoring of Bacteria Along the Transmucosal Passage of the Healing Screw in Absence of Functional Load

PURPOSE

To assess the changes in bacterial profile along the transmucosal path of healing screws placed immediately after insertion of two-piece endosseus implants during the 4-month osseointegration phase, in absence of functional load.

MATERIALS AND METHODS

Two site-specific samples were collected at the peri-implant mucosa of the healing screws of 80 two-piece implants, for a total of 640 samples. Implants placement was performed following a single protocol with flapless technique, in order to limit bacterial contamination of the surgical site. Identical healing screws (5 mm diameter/4 mm height) were used for each of the 80 implants. During the 4 months of the study, the patients followed a standard oral care regimen with no special hygiene maneuvers at the collection sites.

RESULTS

The present research documents that during the 4-month period prior to application of function load the bacterial profile of all sites exhibited a clear prevalence of cocci at the interface between implant neck and osteoalveolar crest margin.

CONCLUSIONS

A potentially pathogenic bacterial flora developed only along the peri-implant transmucosal path.

Light diffusion through composite restorations added with spherical glass mega fillers

PURPOSE

Evaluate how the spherical glass mega fillers (SGMFs) can positively interfere with light diffusion when incorporated in a composite restoration.

MATERIALS AND METHODS

30 samples (Ss) were performed, applying 2 composite layers of 3 mm each: 6 were made with composite only; 6 with a layer of SGMFs of O1.5mm within the first layer of composite; 6 with 2 overlapping layers of SGMFs of O1.5mm; 6 with a layer of SGMFs of O2mm; 6 with 2 overlapping layers of SGMFs of O2mm. The curing time was set at 40s for the first layer, and 120s for the second layer, transilluminated through the first layer. Digital pictures were taken, in standardized settings, during the transillumination, and the light intensity was measured with a digital image analysis software.

RESULTS

From a lateral view the Ss with a single layer of SGMFs of O1.5mm and O2mm, the relative increments of light intensity, were of 24.37% and 33.33% respectively. Concerning the Ss made with 2 layers of SGMFs, the relative increments were of 67.99% and 66.4% respectively. In front view has emerged a relative increase rate of light intensity of 53.66% and 79.58%, in the Ss with a single layer of SGMFs of O1.5mm and of O2mm respectively. Furthermore, in the Ss with two layers of SGMFs of O1.5mm and O2mm the relative increments were of 267.53 and 319.63% respectively.

CONCLUSION

The SGMFs are reliable in facilitating light diffusion within the light-curing composite resins.

Metals used in maxillofacial surgery

The goal of maxillofacial surgery is to restore the shape and functionality of maxillofacial region. In the past years, there has been a tremendous progress in this field because of significant advances in biotechnology that provided innovative biomaterials to efficiently reconstruct the maxillofacial injured region. By using appropriate selection of the implant biomaterial, it is possible to reconstruct the native tissue, both in form and function. The ideal biomaterial should mimic native tissues regarding density, strength, and modulus of elasticity. Autografts are currently the gold standard for replacement of missing tissues, but synthetic biomaterials have been widely used because they eliminate the discomfort to take the replacement tissue from the donor site. Among synthetic biomaterials, different metals may be utilized to efficiently reconstruct the maxillofacial injured region. This article makes an effort to summarize the most important metals in use in maxillofacial surgery, and point out advantages and disadvantage of each type.

Clinical and radiographic evaluation of single tantalum dental implants: a prospective pilot clinical study

OBJECTIVE

The aim of this prospective pilot clinical case series report was to evaluate, through a clinical and radiographic analysis, the peri-implant bone resorption of the tantalum dental implants (TMT) (Zimmer TMT, Parsippany, NJ, USA) one year after prosthetic rehabilitation.

METHODS

Twenty tantalum dental implants were placed in both maxillas and mandibles of 20 patients. Patients were asked to attend a radiographic and clinical follow-up and their previous clinical records and X-rays were assessed. Bone levels were calculated by digitally measuring the distance from the implant shoulder to the first bone-to-implant on periapical radiographs taken at surgery and after 6 and 12 months of functioning. The Pearson correlation analysis was performed to assess it there was a correlation between the measurement of the marginal bone loss (MBL). The Anova Test with a post-hoc analysis using Bonferroni's test was used to compare the three group (0, 6 months and 12 months).

RESULTS

The mean total MBL for the group 0 months was 0.84 mm (SD 0.21), 6 months was 0.87 mm (SD 0.22) and for 12 months was 0.89 mm (SD 0.23). The values of the Pearson's coefficients showed that the data measurement were positively correlated. The Anova test showed a statistically significant difference between the groups.

CONCLUSION

The statistically significant difference in marginal bone loss can be considered physiological. Within the limits of this study it can be concluded that TMT implants have an excellent bone crest's stability, however, to have most accurate information, will be necessary extend the sample.

Cement layer thickness and shear stress resistance in cylindrical dowel spaces: pull-out test

Purpose

This study evaluated the effects of different dowel space (DS) diameters on pull-out bond strength of a cylindrical post, of threaded steel, to dentin.

Materials and methods

Forty-five extracted human teeth were divided in 3 groups with DSs, with the same depth (6 mm), differing for the diameter (i.e. 1.5 mm, Group 1; 1.75 mm, Group 2; 2.00 mm, Group 3). Both the diameter of the post (1.3 mm) and the composite resin cement (Panavia 21) were the same for all the samples. The samples were submitted to pull-out test by means an Universal Testing Machine (Mod. 1193, Instron) (1KN load cell, crosshead speed 0.5 mm/min).

Results

The mean values of the bond strength (BS) were: Group 1, 442±128.3N; Group 2, 411.3±111N; Group 3, 448.7±142.29N. While the calculated average shear bond strengths (SBSs) were: Group 1, 14.7±4.27MPa; Group 2, 11.6±3.14MPa; Group 3, 11±3.5MPa. ANOVA test showed not significative differences, among the groups, concerning the BS: Group 1 vs Group 2 (p = 0.490); Group 1 vs Group 3 (p = 0.894); Group 2 vs Group 3 (p = 0.431). Significative differences were observed, among the groups, concerning the SBS for Group 1 vs Group 2 (p = 0.032) and Group 1 vs Group 3 (p = 0.014). While a not significative difference was found, concerning this parameter, for Group 2 vs Group 3 (p = 0.641).

Conclusion

The cement thickness can influence the SBS of the adhesively luted posts, in our setting, the best values were obtained with a thickness of 100 μm.

An unusual, deceptive delayed of profuse haemorrhage after mandibular implant dentistry: risk planning and medico-legal instruction

Mandibular implant placement (MIP) has been accepted and widely used for decades all over the world, and has reached a very high level of therapeutic reliability. MIP is used mostly in elderly edentulous patients who lost their teeth when dentistry was not oriented to fixed or removable prosthetic. Notwithstanding this, every year cases of severe complications during MIP due to haemorrhage causing life-threatening airway's obstruction are reported. These severe complications of MIP need immediate therapy, usually with hospitalization, and may be potentially fatal. A 56-year-old man presented to the private practice requesting the placement of two dental implants at 41 and 31 previously lost for periodontal disease. Two implants of 3.3 mm of diameter, and 10 mm of length were inserted replacing teeth 31 and 41. Two hours after surgery and home delivery, the patient came to the emergency room complaining of dyspnoea and edema at the floor of the mouth. The maxillo-facial surgeon decided to perform tracheostomy and haemostasis under general anaesthesia. Two weeks after demission a complete healing was performed. This is important for dental practitioners to avoid severe bleeding complications during the MIP in the interforaminal region, especially on the midline. Moreover, when mandibles are severely atrophic, practitioners should be aware of this fact and the possible implications. The evaluation of these data is essential in the correct preoperative planning of implant procedures in the mandible, and with the increasing demand for MIP, the variations of the lingual foramen of the mandible should receive more attention.

Polymerization shrinkage and spherical glass mega fillers: effects on cuspal deflection

PURPOSE

The Authors analyzed the effect of spherical glass mega fillers (SGMF) on reducing contraction stress in dental composite resins, by means of a cavity model simulating the cuspal deflection which occurs on filled tooth cavity walls in clinical condition.

MATERIALS AND METHODS

20 stylized MOD cavities (C-factor = 0.83) were performed in acrylic resin. The inner surface of each cavity was sand blasted and adhesively treated in order to ensure a valid bond with the composite resin. Three different diameter of SGMF were used (i.e. 1, 1,5, 2 mm). The samples were divided in 4 groups of 5 each: Group 1 samples filled with the composite only; Group 2 samples filled with composite added with SGMFs, Ø1mm (16 spheres for each sample); Group 3 samples filled with composite added with SGMFs, Ø1,5 mm (5 spheres for each sample); Group 4 samples filled with composite added with SGMFs, Ø2 mm (2 spheres for each sample). Digital pictures were taken, in standardized settings, before and immediately after the polymerization of the composite material, placed into the cavities. With a digital image analysis software the distances from the coronal reference points of the cavity walls were measured. Then the difference between the first and second measurement was calculated. The data were analyzed by means of the ANOVA test.

RESULTS

A significative reduction on cavity walls deflection, when the composite resin is used in addiction with the SGMFs was observed. The SGMFs of smallest diameter (1mm) showed the better outcome.

CONCLUSION

The SGMFs are reliable in reducing contraction stress in dental composite resins.