Evaluating the Biomechanical Integrity of Various Constructs Utilized for First Metatarsophalangeal Joint Arthrodesis: A Systematic Review

The first metatarsophalangeal (MTP) joint is a frequently loaded joint, handling loads up to 90% of bodyweight. First MTP arthrodesis is a frequently performed procedure designed to improve pain in patients with degenerative MTP joint disease. There are a wide variety of fixation constructs for this procedure without consensus on the most effective method. The purpose of this study was to compare the biomechanical integrity of various constructs utilized for first MTP arthrodesis. A systematic review of the literature was conducted in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. PubMed, CINAHL, MEDLINE, and Web of Science databases were searched from inception to 18 June 2023. Articles discussing the biomechanics of first MTP arthrodesis constructs were included. A total of 168 articles were retrieved. A total of 20 articles involving 446 cadaveric and synthetic bone constructs were included in the final review. Of the six articles comparing dorsal plating with compression screws to crossed interfragmentary screws, five found that dorsal plating had significantly higher stiffness. All three studies assessing shape-memory staples found them to be significantly less stable than crossed screws or dorsal plates alone. Both studies evaluating fully threaded screws found them to be stronger than crossed cancellous screws. Wedge resections have been shown to be 10 times stronger than standard planar or conical excision. Dorsal plating with compression screws is the gold standard for MTP arthrodesis. However, more research into newer methods such as fully threaded screws and wedge resections with an increased focus on translation to clinical outcomes is needed.

Early Failure of a Polyvinyl Alcohol Hydrogel Implant With Osteolysis and Foreign Body Reactions in an Ovine Model of Cartilage Repair

BACKGROUND

Hemiarthroplasty using a polyvinyl alcohol (PVA) hydrogel synthetic implant has been suggested as a good alternative to arthrodesis for the treatment of hallux rigidus. However, failure rates as high as 20% have been recorded.

PURPOSE

To characterize the pathological processes in bone, cartilage, and the synovial membrane after PVA hemiarthroplasty in an ovine model with 6 months of follow-up.

STUDY DESIGN

Controlled laboratory study.

METHODS

A unilateral osteochondral defect (8-mm diameter × 10-mm depth) was made in the medial femoral condyle in 6 sheep. Animals were randomized to receive a PVA implant (n = 4) or to have an empty defect (n = 2) and were monitored for 6 months. Patellofemoral radiographs were obtained at monthly intervals, and quantitative computed tomography was performed at the end of the study. After death, the joints were macroscopically evaluated and scored. Osteochondral and synovial membrane histological findings were assessed using modified Osteoarthritis Research Society International (OARSI) and aseptic lymphocyte-dominated vasculitis-associated lesion (ALVAL) scoring systems. Immunohistochemistry using Iba1 was performed to evaluate activated macrophage infiltration.

RESULTS

Overall, 2 sheep with PVA implants were euthanized at 1 and 5 months because of uncontrollable pain and lameness (failed implants). Quantitative computed tomography showed that sheep with failed implants had 2.1-fold more osteolysis than those with successful implants. The sheep with failed implants had osteoarthritis with extensive glycosaminoglycan loss and cartilage fibrillation of the condyle and opposing tibial surface on histological examination. A foreign body reaction with severe chronic lymphoplasmacytic and granulomatous inflammation with giant cells was detected surrounding the implant. The synovial membrane ALVAL score was 9 of 19 and 14 of 19 in failed implants with synovial hyperplasia and lymphoplasmacytic and macrophage infiltration. In contrast, the synovial membrane in successful implants and empty defects was normal (ALVAL score = 0/19). Immunolabeling for Iba1 in failed implants confirmed extensive and dense macrophage infiltration within the condyle and synovial membrane, with the highest immunoreactive score (9/9).

CONCLUSION

PVA hydrogel implants had a 50% failure rate with uncontrollable pain, severe osteolysis, inflammation, and foreign body reactions.

CLINICAL RELEVANCE

The failure rate and pathological characteristics of the PVA implants suggest that their use should not be continued in human patients without further in vivo safety studies.

Effect of toe exercises and toe grip strength on the treatment of primary metatarsalgia

Background

The relationship of metatarsalgia and toe function is poorly understood. We investigated the efficacy of toe exercises for the treatment of metatarsalgia.

Methods

Forty-one (56 feet) metatarsalgia patients (mean age ± SD: 63.4 ± 10.6) underwent toe strength measurement. We recorded pre- and post-treatment VAS score, AOFAS score, marble pickup, single-leg standing time (SLST), and compared in two subgroups to evaluate impact of disease duration on treatment outcome.

Results

Post treatment, toe plantarflexion strength improved (all p < 0.01); VAS scores decreased (p < 0.01); AOFAS scores, marble pickup, and SLST improved (all p < 0.01). Patients symptomatic for > 1 year had significantly lower changes in VAS scores (p < 0.01). Multivariate analysis showed patients with longer disease duration, and larger body mass index had significantly lower improvement in VAS scores (p = 0.029 and p = 0.036, respectively). Device consistency assessed by ICC was excellent (0.89–0.97).

Conclusion

Toe function and metatarsalgia are improved by toe exercises, suggesting that they are closely related.

Musculoskeletal modeling of total ankle arthroplasty using force-dependent kinematics for predicting in vivo joint mechanics

In vivo load and motion in the ankle joint play a key role in the understanding of the failure mechanism and function outcomes of total ankle arthroplasty. However, a thorough understanding of the biomechanics of the ankle joint in daily activities is lacking. The objective of this study was to develop a novel lower extremity musculoskeletal multibody dynamics model with total ankle arthroplasty considering the 6 degrees of freedom of the ankle joint motions and the deformable contact mechanics of the implant, based on force-dependent kinematics method. A patient who underwent total ankle arthroplasty surgery was considered. The walking gait data of the patient was measured in a gait laboratory and used as the input for the patient-specific musculoskeletal modeling. The predictions from the musculoskeletal model of total ankle arthroplasty included dorsiflexion-plantar flexion, inversion-eversion, internal-external rotation, anterior-posterior translation, inferior-superior translation, and medial-lateral translation of the tibiotalar joint, the ankle contact forces, the muscle activations, and the ligament forces. The magnitudes and tendencies of the predicted results were all within reasonable ranges, as compared with the data available in the literature. The predicted peak total ankle contact force was 6.55 body weight. In addition, the peak contact forces of the lateral and medial compartments were 4.22 body weight and 2.59 body weight, respectively. This study provides a potential new platform for the design of a better ankle prosthesis, the improvement of the operation techniques of the clinicians, and the accelerated postoperative recovery of the patients.

Plantar pressures in identical and non-identical twins

Identifying environmental risk factors for musculoskeletal disorders is challenging due to the number of potential confounders. Twins are of particular interest for researchers interested in studying these types of problems due to their inherent control for the influence of genetic factors. In twin studies, this population can allow environmental risk factors to be more easily identified, and this type of study design may allow the role of biomechanics in injury and disease to be further explored. At present, it is unclear if foot function displays more similarity between certain types of twins. In this study, we hypothesized that the plantar pressures of monozygotic (identical) twins would be more similar between pairs than dizygotic (non-identical) twins. We measured static and dynamic plantar pressures from five pairs of each twin type. Statistical parametric modeling was used to compare pressure distributions at the sensor level. For >80% of stance phase, the pixel level analysis indicated that monozygotic twins had less variation in plantar pressure between pairs. The average z-statistic across the entire trial was 0.88 for the monozygotic group and 1.13 for the dizygotic group. In this study we provide evidence of greater similarity of plantar pressures in monozygotic twin pairs compared to dizygotic twins. This finding supports the use of co-twin studies investigating potentially modifiable environmental and biomechanical risk factors for musculoskeletal conditions that affect the foot and ankle.

Joint moments and contact forces in the foot during walking

The net force and moment of a joint have been widely used to understand joint disease in the foot. Meanwhile, it does not reflect the physiological forces on muscles and contact surfaces. The objective of the study is to estimate active moments by muscles, passive moments by connective tissues and joint contact forces in the foot joints during walking. Joint kinematics and external forces of ten healthy subjects (all males, 24.7 ± 1.2 years) were acquired during walking. The data were entered into the five-segment musculoskeletal foot model to calculate muscle forces and joint contact forces of the foot joints using an inverse dynamics-based optimization. Joint reaction forces and active, passive and net moments of each joint were calculated from muscle and ligament forces. The maximum joint reaction forces were 8.72, 4.31, 2.65, and 3.41 body weight (BW) for the ankle, Chopart's, Lisfranc and metatarsophalangeal joints, respectively. Active and passive moments along with net moments were also obtained. The maximum net moments were 8.6, 8.4, 5.4 and 0.8%BW∙HT, respectively. While the trend of net moment was very similar between the four joints, the magnitudes and directions of the active and passive moments varied between joints. The active and passive moments during walking could reveal the roles of muscles and ligaments in each of the foot joints, which was not obvious in the net moment. This method may help narrow down the source of joint problems if applied to clinical studies.

A framework for the etiology of running-related injuries

The etiology of running-related injury is important to consider as the effectiveness of a given running-related injury prevention intervention is dependent on whether etiologic factors are readily modifiable and consistent with a biologically plausible causal mechanism. Therefore, the purpose of the present article was to present an evidence-informed conceptual framework outlining the multifactorial nature of running-related injury etiology. In the framework, four mutually exclusive parts are presented: (a) Structure-specific capacity when entering a running session; (b) structure-specific cumulative load per running session; (c) reduction in the structure-specific capacity during a running session; and (d) exceeding the structure-specific capacity. The framework can then be used to inform the design of future running-related injury prevention studies, including the formation of research questions and hypotheses, as well as the monitoring of participation-related and non-participation-related exposures. In addition, future research applications should focus on addressing how changes in one or more exposures influence the risk of running-related injury. This necessitates the investigation of how different factors affect the structure-specific load and/or the load capacity, and the dose-response relationship between running participation and injury risk. Ultimately, this direction allows researchers to move beyond traditional risk factor identification to produce research findings that are not only reliably reported in terms of the observed cause-effect association, but also translatable in practice.