Prediction of heat-induced collagen shrinkage by use of second harmonic generation microscopy

Suitability of Slaughterhouse-Acquired Pig Eyes as Model Systems for Refractive Ultraviolet and Infrared Femtosecond Laser Research

PURPOSE

To elucidate whether it is feasible to use porcine eyes from scalded, abattoir-acquired animals for refractive femtosecond laser research.

METHODS

An infrared laser (FS 200) and an ultraviolet laser (prototype version) were tested for their applicability on scalded pig eyes. Fifty porcine eyes were divided into two equally-sized groups and assigned to either the infrared or the ultraviolet laser. Both laser groups were comprised of five subgroups of n = 5 eyes each. Group A: non-scalded eyes (negative control); group B: eyes taken from tunnel-scalded animals; group C1: eyes taken from tank-scalded animals without opaque corneal lesion; group C2: eyes taken from animals with opaque corneal lesion; group D: eyes scalded in toto in the laboratory (positive control). In each group the lasers were employed to create a stromal flap. The quality of the laser cuts and the resulting flap beds, as well as of the porcine corneas themselves, was examined by anterior segment optical coherence tomography and scanning electron microscopy.

RESULTS

All scalded specimens exhibited substantial corneal swelling, most pronounced in group C2. After ultraviolet laser application, the tank- and tunnel-scalded samples displayed marked irregularities and an increased degree of surface roughness in the flap beds. After infrared laser application, this was only the case in the tank-scalded specimens.

CONCLUSION

It is not recommended to use eyes taken from scalded pigs for ultraviolet femtosecond laser experiments. For infrared femtosecond lasers, eyes taken from tunnel-scalded animals may represent an acceptable alternative, if non-scalded eyes are not available.

Characterization of picosecond laser-induced optical breakdown using harmonic generation microscopy

BACKGROUND AND OBJECTIVES

By creating microinjuries usually confined to the epidermis, a fractional picosecond 1064-nm Nd:YAG laser that delivers an array of highly focused beamlets can be effectively used for facial rejuvenation or resurfacing. However, the mechanism of dermal remodeling underlying this nonablative treatment remains unclear.

METHODS

Five participants having skin phototype III-IV were recruited for intervention using a fractional picosecond 1064-nm Nd:YAG laser system equipped with a holographic diffractive beam-splitting optic. The laser-induced histopathological changes on human skin were examined in vivo using a harmonic generation microscopy (HGM), visualizing second harmonic generation (SHG), and third harmonic generation (THG) contrasts dichromatically. SHG refers for collagen distribution, while THG represents for epidermal components in the HGM signal.

RESULTS

Histological hematoxylin and eosin staining and in vivo HGM imaging studies revealed the presence of epidermal vacuoles below the stratum granulosum along with keratinocyte degeneration or cytolysis. In addition to the epidermal vacuoles, HGM imaging exclusively demonstrated laser-induced shock wave propagation arranged as a THG-bright concentric pattern in the epidermis and loss of SHG signals in the papillary dermis immediately beneath the epidermal vacuoles.

CONCLUSIONS

Alongside generating epidermal vacuoles, the fractional picosecond 1064-nm Nd:YAG laser induced collagen changes. These collagen changes may lead to dermal remodeling and neocollagenesis underlying the fractional picosecond laser treatment.

Influence of Laser Irradiation Settings, during Diode-Assisted Endodontics, on the Intraradicular Adhesion of Self-Etch and Self-Curing Luting Cement during Restoration-An Ex Vivo Study

Background: Diode-assisted endodontics is nowadays utilized for pulp space disinfection, but little is known on the bonding potential of this lased root dentin when the tooth is restored with an intracanal polymer post. Objectives: to investigate the influence of diode laser irradiation settings, in laser-assisted endodontics, on the intraradicular bonding of composite materials. Methods: Sixteen two-rooted, maxillary first premolars were collected, prepared up to F4 (Protaper Universal. Dentsply-Maillefer, Ballaigues, Switzerland), and randomly assigned in two groups: group A (chopped mode or short pulse), diode irradiated according to protocol, pulse 25 ms, power 2.5 W, and group B (microchopped mode or ultrashort pulse), pulse 25 μs, peak power 12 W (both groups GentleRay. KaVo Dental, Biberach an der Riss, Germany). Buccal canals were irradiated, palatal ones served as controls. Canals were then obturated, post space was created in all canals, and quartz-fiber posts (ICE light Danville. Danville Materials, San Ramon, CA, USA) were cemented by self-etch self-curing cement (Max Cem Elite. Kerr, West Collins Orange, CA, USA) (Max Cem Elite. Kerr, Brea, CA, USA). A week later, teeth were sectioned horizontally in 1 mm increments. Push-out test was conducted in a Zwick testing machine (Zwick Roell, Ulm, Germany) at 1 mm/min speed, and the force required to dislodge the post from each specimen (F-max) was recorded. Weibull regression models were applied for statistical analyses. Results: Differences in F-max by group (control vs. chopped mode vs. microchopped mode) and height (meaning the apical-to-coronal position of each specimen along the root) were statistically significant (p < 0.05 in all cases). Conclusions: Short pulses (or chopped mode) had a profound positive effect on the quality of intraradicular bonding, while Ultrashort pulses (or microchopped mode) affected it negatively. In addition, apically positioned bonding proved weaker compared with more coronally located specimens.

Usability of abattoir-acquired pig eyes for refractive excimer laser research

The purpose of this study was to elucidate, under which conditions abattoir-acquired pig eyes are suitable for refractive excimer laser experiments. Porcine eyes from tunnel-scalded (n = 5) and tank-scalded (n = 10) pigs were compared to unscalded eyes (n = 5) and to eyes scalded in the laboratory (n = 5). The corneal epithelium was removed before an excimer laser was used to perform a − 8.0 D photoablation. Corneal thickness was measured by optical coherence topography before and after photoablation. The ablation depth was determined with a contour measuring station, the morphology of the ablated areas was characterized by scanning electron microscopy and white-light profilometry. The scalded eyes showed an increase in corneal swelling which gained statistical significance in tank-scalded eyes showing a wedge-shaped opaque stromal lesion in the nasal corneal quadrant. A measurable deterioration of photoablation was only found in tank-scalded eyes that exhibited the opaque lesion. Ablated area morphology was smooth and regular in the unscalded and tunnel-scalded eyes. The tank-scalded eyes showed conspicuous wrinkles. While unscalded eyes should always be preferred for excimer laser laboratory experiments, the data suggest that the use of tunnel-scalded eyes may also be acceptable and should be chosen over tank-scalded eyes.

Sutureless energy-based wound closure: a step in the quest for trocar site hernia prevention

OBJECTIVE

Easy and safe methods of fascia closure are needed in order to reduce the risk for trocar site hernias without affecting procedure time significantly. Here we present a method for port site closure using heat induced collagen denaturation.

MATERIAL AND METHODS

Controlled heat-induced collagen denaturation was applied to laparoscopic trocar sites in living porcine animal models. These were compared to control trocar sites which were left open. Port sites were evaluated visually at days 14 and 28 after the procedure, and both visually and pathologically at post-procedural day 42.

RESULTS

A total of 12 port sites were evaluated in three pigs. No incisional hernias were noted at any of the trocar sites in both groups. Histological evaluation revealed that one of the six control ports appeared to have a complete transfascial defect, whereas none of the study group trocars showed this finding. Furthermore, the study port sites showed a more robust scarring pattern.

CONCLUSIONS

Heat-induced collagen denaturation in this preliminary study was found to be safe and allowed better scarring of the healing port sites. We believe that this technology may offer a safe and efficient closure of laparoscopic trocar sites. More studies are needed to further evaluate the true effectiveness of this technology.Abbreviations: TSH: trocar site hernia; IACUC: institutional animal care and use committee.

Cartilage and collagen mechanics under large-strain shear within in vivo and at supraphysiogical temperatures

Human joints, particularly those of extremities, experience a significant range of temperatures in vivo. Joint temperature influences the mechanics of both joint and cartilage, and the mechanics of cartilage can affect the temperature of both joint and cartilage. Thermal treatments and tissue repairs, such as thermal chondroplasty, and ex vivo tissue engineering may also expose cartilage to supraphysiological temperatures. Furthermore, although cartilage undergoes principally compressive loads in vivo, shear strain plays a significant role at larger compressive strains. Thus, we aimed to determine whether and how the bulk mechanical responses of cartilage undergoing large-strain shear change (1) within the range of temperatures relevant in vivo, and (2) both during and after supraphysiological thermal treatments. We completed large-strain shear tests (10 and 15%) at four thermal conditions: 24^∘C and 40^∘C to span the in vivo range, and 70^∘C and 24^∘C repeated after 70^∘C to explore mechanics during and after potential treatments. We calculated the bulk mechanical responses (strain-energy dissipation densities, peak-to-peak shear stresses, and peak-effective shear moduli) as of function of temperature and used statistical methods to probe significant differences. To probe the mechanisms underlying differences we assessed specimens, principally the type II collagen, with imaging (second harmonic generation and transmission electron microscopies, and histology) and assessed the temperature-dependent mechanics of type II collagen molecules within cartilage using steered molecular dynamics simulations. Our results suggest that the bulk mechanical responses of cartilage depend significantly on temperature both within the in vivo range and at supraphysiological temperatures, showing significant reductions in all mechanical measures with increasing temperature. Using imaging and simulations we determined that one underlying mechanism explaining our results may be changes in the molecular deformation profiles of collagen molecules versus temperature, likely compounded at larger length scales. These new insights into the mechanics of cartilage and collagen may suggest new treatment targets for damaged or osteoarthritic cartilage.

Assessing collagen fibrils molecular damage after a single stretch-release cycle

Mechanical testing of connective tissues such as tendons and ligaments can lead to collagen denaturation even in the absence of macroscale damage. The following tensile loading protocols, ramp loading to failure, overloading and release, cyclic overloading and cyclic fatigue loading, all yield molecular damage in rat or bovine tendons. Single collagen fibrils extracted from the positional common digital extensor tendon of the forelimb also show molecular damage after tensile loading to failure. Using fibrils from the same source we assess changes to the molecular and supramolecular structure after tensile stress relaxation at strains between 4 and 22% followed by release. We observe no broken fibril and no significant change in D-band spacing. However, we observe significant binding of a fluorescent collagen hybridizing peptide to the fibrils indicating that collagen denaturation occurs in a strain dependent way for relaxation times between 1 s and 1500 s. We also show that peptide binding is associated with a decrease of the cross-sectional area of the fibrils providing an estimate of the dry volume loss due to molecular denaturation as well as an estimate of the mechanical energy density required, 25-110 MJ m^-3. In summary we show that collagen molecular damage can occur in the absence of fibril failure and without visible changes to the supramolecular structure.

Quantification of collagen fiber structure using second harmonic generation imaging and two-dimensional discrete Fourier transform analysis: Application to the human optic nerve head

Second harmonic generation (SHG) microscopy is widely used to image collagen fiber microarchitecture due to its high spatial resolution, optical sectioning capabilities and relatively nondestructive sample preparation. Quantification of SHG images requires sensitive methods to capture fiber alignment. This article presents a two-dimensional discrete Fourier transform (DFT)-based method for collagen fiber structure analysis from SHG images. The method includes integrated periodicity plus smooth image decomposition for correction of DFT edge discontinuity artefact, avoiding the loss of peripheral image data encountered with more commonly used windowing methods. Outputted parameters are as follows: the collagen fiber orientation distribution, aligned collagen content and the degree of collagen fiber dispersion along the principal orientation. We demonstrate its application to determine collagen microstructure in the human optic nerve head, showing its capability to accurately capture characteristic structural features including radial fiber alignment in the innermost layers of the bounding sclera and a circumferential collagen ring in the mid-stromal tissue. Higher spatial resolution rendering of individual lamina cribrosa beams within the nerve head is also demonstrated. Validation of the method is provided in the form of correlative results from wide-angle X-ray scattering and application of the presented method to other fibrous tissues.

Multiphoton microscopic imaging of rabbit dorsal skin

Rabbits are often preferred to be experimental animals during the skin research. The visualizing and understanding the full-thickness structure of rabbit skin has significance in biology, medicine, and animal husbandry. In this study, multiphoton microscopy (MPM) was employed to examine the rabbit skin on the back, which was based on second harmonic generation and two-photon excited fluorescence. High-resolution images were achieved from the fresh, unfixed, and unstained tissues, showing detailed microstructure of the skin without the administration of exogenous contrast agents. The morphology and distribution of the main components of epidermis and dermis, such as keratin, collagen fibers, elastic fibers, and hair follicles, can be distinctly identified in MPM images. Since the changes in these components are tightly related to skin diseases and wound healing, the noninvasive nature of MPM enables it become a valuable tool in skin research for detecting and monitoring.

Evaluation of fractional photothermolysis effect in a mouse model using nonlinear optical microscopy

Fractional photothermolysis (FP) induces discrete columns of photothermal damage in skin dermis, thereby promoting collagen regeneration. This technique has been widely used for treating wrinkles, sun damage, and scar. In this study, we evaluate the potential of multiphoton microscopy as a noninvasive imaging modality for the monitoring of skin rejuvenation following FP treatment. The dorsal skin of a nude mouse underwent FP treatment in order to induce microthermal zones (MTZs). We evaluated the effect of FP on skin remodeling at 7 and 14 days after treatment. Corresponding histology was performed for comparison. After 14 days of FP treatment at 10 mJ, the second harmonic generation signal recovered faster than the skin treated with 30 mJ, indicating a more rapid regeneration of dermal collagen at 10 mJ. Our results indicate that nonlinear optical microscopy is effective in detecting the damaged areas of MTZ and monitoring collagen regeneration following FP treatment.

Double thermal transitions of type I collagen in acidic solution

Contributed equally to this work. To further understand the origin of the double thermal transitions of collagen in acidic solution induced by heating, the denaturation of acidic soluble collagen was investigated by micro-differential scanning calorimeter (micro-DSC), circular dichroism (CD), dynamic laser light scattering (DLLS), transmission electron microscopy (TEM), and two-dimensional (2D) synchronous fluorescence spectrum. Micro-DSC experiments revealed that the collagen exhibited double thermal transitions, which were located within 31-37 °C (minor thermal transition, T(s) ∼ 33 °C) and 37-55 °C (major thermal transition, T(m) ∼ 40 °C), respectively. The CD spectra suggested that the thermal denaturation of collagen resulted in transition from polyproline II type structure to unordered structure. The DLLS results showed that there were mainly two kinds of collagen fibrillar aggregates with different sizes in acidic solution and the larger fibrillar aggregates (T(p2) = 40 °C) had better heat resistance than the smaller one (T(p1) = 33 °C). TEM revealed that the depolymerization of collagen fibrils occurred and the periodic cross-striations of collagen gradually disappeared with increasing temperature. The 2D fluorescence correlation spectra were also applied to investigate the thermal responses of tyrosine and phenylalanine residues at the molecular level. Finally, we could draw the conclusion that (1) the minor thermal transition was mainly due to the defibrillation of the smaller collagen fibrillar aggregates and the unfolding of a little part of triple helices; (2) the major thermal transition primarily arose from the defibrillation of the larger collagen fibrillar aggregates and the complete denaturation of the majority part of triple helices.

The acute effect of bipolar radiofrequency energy thermal chondroplasty on intrinsic biomechanical properties and thickness of chondromalacic human articular cartilage

Radio frequency energy (RFE) thermal chondroplasty has been a widely-utilized method of cartilage debridement in the past. Little is known regarding its effect on tissue mechanics. This study investigated the acute biomechanical effects of bipolar RFE treatment on human chondromalacic cartilage. Articular cartilage specimens were extracted (n = 50) from femoral condyle samples of patients undergoing total knee arthroplasty. Chondromalacia was graded with the Outerbridge classification system. Tissue thicknesses were measured using a needle punch test. Specimens underwent pretreatment load-relaxation testing using a spherical indenter. Bipolar RFE treatment was applied for 45 s and the indentation protocol was repeated. Structural properties were derived from the force-time data. Mechanical properties were derived using a fibril-reinforced biphasic cartilage model. Statistics were performed using repeated measures ANOVA. Cartilage thickness decreased after RFE treatment from a mean of 2.61 mm to 2.20 mm in Grade II, II-III, and III specimens (P < 0.001 each). Peak force increased after RFE treatment from a mean of 3.91 N to 4.91 N in Grade II and III specimens (P = 0.002 and P = 0.003, respectively). Equilibrium force increased after RFE treatment from a mean of 0.236 N to 0.457 N (P < 0.001 each grade). Time constant decreased after RFE treatment from a mean of 0.392 to 0.234 (P < 0.001 for each grade). Matrix modulus increased in all specimens following RFE treatment from a mean 259.12 kPa to 523.36 kPa (P < 0.001 each grade). Collagen fibril modulus decreased in Grade II and II-III specimens from 60.50 MPa to 42.04 MPa (P < 0.001 and P = 0.005, respectively). Tissue permeability decreased in Grade II and III specimens from 2.04 ∗10(-15) m(4)/Ns to 0.91 ∗10(-15) m(4)/Ns (P < 0.001 and P = 0.009, respectively). RFE treatment decreased thickness, time constant, fibril modulus, permeability, but increased peak force, equilibrium force, and matrix modulus. While resistance to shear and tension could be compromised due to removal of the superficial layer and decreased fibril modulus, RFE treatment increases matrix modulus and decreases tissue permeability which may restore the load- bearing capacity of the cartilage.

Gene expression of tendon collagens and tenocyte markers in long-term monolayer and high-density cultures of rat tenocytes

As a result of repeated movement, tendons are functionally open to traumas. According to this situation, tenocytes have already been used for tissue engineering therapies. It has been reported that long-term monolayer (ML) culture of tenocytes may lead to a phenotypic drift within passages. Depending on our previously published work, it is clearly demonstrated that high-density (HD) culture improves cell growth and differentiation of tenocytes. However, it is not yet established if HD favors the differentiated state during long-term culture. Therefore, we compared the differences in gene expression of tendon collagens and tendon markers of tenocytes from long-term ML and HD culture conditions by quantitative, real-time polymerase chain reaction (QRT-PCR) for over a period of 3 weeks. COLI, COLIII, COLV, Scx, and Tnmd were target genes as the major matrix constituents of tendons as well as being involved in matrix integrity and tenocyte phenotype. According to our results, tenocytes in HD culture synthesized less amounts of COLIII, COLV, and Tnmd, and dependent on the investigation time point, higher amounts of Scx. We consider that tenocytes produced in HD culture system may not provide sufficient efficiency during tissue engineering approaches. By the fact that most molecules showed significantly higher expression profiles in ML culture condition, it is suggested that culture and passage in ML should be taken into consideration for further tissue engineering approaches to maintain a phenotype with less amount of drift.

Thermal denaturation studies of collagen by microthermal analysis and atomic force microscopy

The structural properties of collagen have been the subject of numerous studies over past decades, but with the arrival of new technologies, such as the atomic force microscope and related techniques, a new era of research has emerged. Using microthermal analysis, it is now possible to image samples as well as performing localized thermal measurements without damaging or destroying the sample itself. This technique was successfully applied to characterize the thermal response between native collagen fibrils and their denatured form, gelatin. Thermal transitions identified at (150 ± 10)°C and (220 ± 10)°C can be related to the process of gelatinization of the collagen fibrils, whereas at higher temperatures, both the gelatin and collagen samples underwent two-stage transitions with a common initial degradation temperature at (300 ± 10)°C and a secondary degradation temperature of (340 ± 10)°C for the collagen and of (420 ± 10)°C for the gelatin, respectively. The broadening and shift in the secondary degradation temperature was linked to the spread of thermal degradation within the gelatin and collagen fibrils matrix further away from the point of contact between probe and sample. Finally, similar measurements were performed inside a bone resorption lacuna, suggesting that microthermal analysis is a viable technique for investigating the thermomechanical response of collagen for in situ samples that would be, otherwise, too challenging or not possible using bulk techniques.

In search of the Golden Fleece: unraveling principles of morphogenesis by studying the integrative biology of skin appendages

The mythological story of the Golden Fleece symbolizes the magical regenerative power of skin appendages. Similar to the adventurous pursuit of the Golden Fleece by the multi-talented Argonauts, today we also need an integrated multi-disciplined approach to understand the cellular and molecular processes during development, regeneration and evolution of skin appendages. To this end, we have explored several aspects of skin appendage biology that contribute to the Turing activator/inhibitor model in feather pattern formation, the topo-biological arrangement of stem cells in organ shape determination, the macro-environmental regulation of stem cells in regenerative hair waves, and potential novel molecular pathways in the morphological evolution of feathers. Here we show our current integrative biology efforts to unravel the complex cellular behavior in patterning stem cells and the control of regional specificity in skin appendages. We use feather/scale tissue recombination to demonstrate the timing control of competence and inducibility. Feathers from different body regions are used to study skin regional specificity. Bioinformatic analyses of transcriptome microarrays show the potential involvement of candidate molecular pathways. We further show Hox genes exhibit some region specific expression patterns. To visualize real time events, we applied time-lapse movies, confocal microscopy and multiphoton microscopy to analyze the morphogenesis of cultured embryonic chicken skin explants. These modern imaging technologies reveal unexpectedly complex cellular flow and organization of extracellular matrix molecules in three dimensions. While these approaches are in preliminary stages, this perspective highlights the challenges we face and new integrative tools we will use. Future work will follow these leads to develop a systems biology view and understanding in the morphogenetic principles that govern the development and regeneration of ectodermal organs.

Multimodal, multiphoton microscopy and image correlation analysis for characterizing corneal thermal damage

We used the combination of multiphoton autofluorescence (MAF), forward second-harmonic generation (FWSHG), and backward second-harmonic generation (BWSHG) imaging for the qualitative and quantitative characterization of thermal damage of ex vivo bovine cornea. We attempt to characterize the structural alterations by qualitative MAF, FWSHG, and BWSHG imaging in the temperature range of 37 to 90 degrees C. In addition to measuring the absolute changes in the three types of signals at the stromal surface, we also performed image correlation analysis between FWSHG and BWSHG and demonstrate that with increasing thermal damage, image correlation between FWSHG and BWSHG significantly increases. Our results show that while MAF and BWSHG intensities may be used as preliminary indicators of the extent of corneal thermal damage, the most sensitive measures are provided by the decay in FWSHG intensity and the convergence of FWSHG and BWSHG images.

Thermally-Induced Change in the Relaxation Behavior of Skin Tissue

Skin biothermomechanics is highly interdisciplinary, involving bioheat transfer, burn damage, biomechanics, and physiology. Characterization of the thermomechanical behavior of skin tissue is of great importance and can contribute to a variety of medical applications. However, few quantitative studies have been conducted on the thermally-dependent mechanical properties of skin tissue. The aim of the present study is to experimentally examine the thermally-induced change in the relaxation behavior of skin tissue in both hyperthermal and hypothermic ranges. The results show that temperature has great influence on the stress-relaxation behavior of skin tissue under both hyperthermal and hypothermic temperatures; the quantitative relationship that has been found between temperature and the viscoelastic parameter (the elastic fraction or fractional energy dissipation) was temperature dependent, with greatest dissipation at high temperature levels.

Visualizing laser-skin interaction in vivo by multiphoton microscopy

Recently, multiphoton microscopy has gained much popularity as a noninvasive imaging modality in biomedical research. We evaluate the potential of multiphoton microscopy for monitoring laser-skin reaction in vivo. Nude mouse skin is irradiated with an erbium:YAG laser at various fluences and immediately imaged by a multiphoton microscope. The alterations of cutaneous nonlinear optical properties including multiphoton autofluorescence and second-harmonic generation associated with laser irradiation are evaluated morphologically and quantitatively. Our results show that an erbium:YAG laser at a low fluence can selectively disrupt the stratum corneum, and this alteration may account for the penetration enhancing effect of laser-assisted transcutaneous drug delivery. At a higher fluence, the zone of tissue ablation as well as the disruption of the surrounding stratum corneum, keratinocytes, and dermal extracellular matrix can be better characterized by multiphoton microscopy as compared with conventional histology. Furthermore, the degree of collagen damage in the residual thermal zone can be quantified by second-harmonic generation signals, which have significant difference between control skin, skin irradiated with a 1.5-, 8-, and 16-J/cm2 erbium:YAG laser (P<0.05). We show that multiphoton microscopy can be a useful noninvasive imaging modality for monitoring laser-skin reaction in vivo.

Photothermal effects in connective tissues mediated by laser-activated gold nanorods

We report a study on the application of laser-activated nanoparticles in the direct welding of connective tissues, which may become a valuable technology in biomedicine. We use colloidal gold nanorods as new near-infrared chromophores to mediate functional photothermal effects in the eye lens capsules. Samples obtained ex vivo from porcine eyes are treated to simulate heterotransplants with 810-nm diode laser radiation in association with a stain of gold nanorods of aspect ratio approximately 4. This stain is applied at the interface between a patch of capsule from a donor eye and the capsule of a recipient eye. Then, by administration of laser pulses of 40 msec and approximately 100-140 J/cm(2), we achieved the local denaturation of the endogenous collagen filaments, which reveals that the treated area reached temperatures above 50 degrees C. The thermal damage is confined within 50-70 mum in a radial distance from the irradiated area.

Characterization of type I, III and V collagens in high-density cultured tenocytes by triple-immunofluorescence technique

The purpose of this study is to examine the intracellular distribution of collagen types I, III and V in tenocytes using triple-label immunofluorescence staining technique in high-density tenocyte culture on Filter Well Inserts (FWI). The tenocytes were incubated for 4 weeks under monolayer conditions and for 3 weeks on FWI. At the end of the third week of high-density culture, we observed tenocyte aggregation followed by macromass cluster formation. Immunofluorescence labeling with anti-collagen type I antibody revealed that the presence of collagen type I was mostly around the nucleus. Type III collagen was more diffused in the cytoplasm. Type V collagen was detected in fibrillar and vesicular forms in the cytoplasm. We conclude that, the high-density culture on FWI is an appropriate method for the production of tenocytes without loosing specialized processes such as the synthesis of different collagen molecules. We consider that the high-density culture system is suitable for in vitro applications which affect tendon biology and will improve our understanding of the biological behavior of tenocytes in view of adequate matrix structure synthesis. Such high-density cultures may serve as a model system to provide sufficient quantities of tenocytes to prepare tenocyte-polymer constructs for tissue engineering applications in tendon repair.

In vivo imaging of atherosclerotic plaques in apolipoprotein E deficient mice using nonlinear microscopy

Structural proteins such as elastin and collagen can be readily imaged by using two-photon excitation and second-harmonic generation microscopic techniques, respectively, without physical or biochemical processing of the tissues. This time- and effort-saving advantage makes these imaging techniques convenient for determining the structural characteristics of blood vessels in vivo. Fibrillar collagen is a well-known element involved in the formation of atherosclerotic lesions. It is also an important component of the fibrous cap responsible for structural stability of atherosclerotic plaques. High resolution in vivo microscopic imaging and characterization of atherosclerotic lesions in animal models can be particularly useful for drug discovery. However, it is hindered by the limitations of regular microscope objectives to gain access of the tissues of interest and motional artifacts. We report a technique that facilitates in vivo microscopic imaging of carotid arteries of rodents using conventional microscope objectives, and at the same time avoids motional artifacts. As a result, collagen, elastin, leukocytes, cell nuclei, and neutral lipids can be visualized in three dimensions in live animals. We present and discuss in vivo imaging results using a flow cessation mouse model of accelerated atherosclerosis.

Evaluation of dermal thermal damage by multiphoton autofluorescence and second-harmonic-generation microscopy

We attempt to characterize the degree of skin thermal damage by using multiphoton microscopy to characterize dermal thermal damage. Our results show that dermal collagen and elastic fibers display different susceptibility to thermal injury. Morphologically, dermal collagen starts to denature at 60 degrees C while fracture and aggregation of elastic fibers do not occur until 65 degrees C. With increasing temperatures, the structures of both elastic and collagen fibers deteriorate. While second-harmonic-generation (SHG) imaging is helpful in identifying the denaturation temperature of collagen, autofluorescence (AF) imaging can help to identify the structural alternations of tissue at higher temperatures when SHG signals have decayed. We also employ a ratiometric approach based on the AF-to-SHG index of dermis (ASID) to characterize the degree of dermal thermal damage. Use of the ASID index can bypass the difficulty in analyzing inhomogeneous dermal fibers and show that dermal collagen starts to denature at 60 degrees C. Our results suggest that with additional developments, multiphoton microscopy has potential to be developed into an effective in vivo imaging technique to monitor and characterize dermal thermal damage.

Discrimination of basal cell carcinoma from normal dermal stroma by quantitative multiphoton imaging

We performed multiphoton fluorescence (MF) and second-harmonic generation (SHG) imaging on human basal cell carcinoma samples. In the dermis, basal cell carcinomas can be identified by masses of autofluorescent cells with relatively large nuclei and marked peripheral palisading. In the normal dermis, SHG from dermal collagen contributes largely to the multiphoton signal. However, within the cancer stroma, SHG signals diminish and are replaced by autofluorescent signals, indicating that normal collagen structures responsible for SHG have been altered. To better delineate the cancer cells and cancer stroma from the normal dermis, a quantitative MF to SHG index is developed. We demonstrate that this index can be used to differentiate cancer cells and adjacent cancer stroma from the normal dermis. Our work shows that MF and SHG imaging can be an alternative for Mohs' surgery in the real-time guidance of the secure removal of basal cell carcinoma.