The mechanism of diamond nucleation from energetic species

The Structure Properties of Carbon Materials Formed in 2,4,6-Triamino-1,3,5-Trinitrobenzene Detonation: A Theoretical Insight for Nucleation of Diamond-like Carbon

The structure and properties of nano-carbon materials formed in explosives detonation are always a challenge, not only for the designing and manufacturing of these materials but also for clearly understanding the detonation performance of explosives. Herein, we study the dynamic evolution process of condensed-phase carbon involved in 2,4,6-Triamino-1,3,5-trinitrobenzene (TATB) detonation using the quantum-based molecular dynamics method. Various carbon structures such as, graphene-like, diamond-like, and "diaphite", are obtained under different pressures. The transition from a C sp2- to a sp3-hybrid, driven by the conversion of a hexatomic to a non-hexatomic ring, is detected under high pressure. A tightly bound nucleation mechanism for diamond-like carbon dominated by a graphene-like carbon layer is uncovered. The graphene-like layer is readily constructed at the early stage, which would connect with surrounding carbon atoms or fragments to form the tetrahedral structure, with a high fraction of sp3-hybridized carbon. After that, the deformed carbon layers further coalesce with each other by bonding between carbon atoms within the five-member ring, to form the diamond-like nucleus. The complex "diaphite" configuration is detected during the diamond-like carbon nucleation, which illustrates that the nucleation and growth of detonation nano-diamond would accompany the intergrowth of graphene-like layers.

Etching Kinetics of Nanodiamond Seeds in the Early Stages of CVD Diamond Growth

We present an experimental study on the etching of detonation nanodiamond (DND) seeds during typical microwave chemical vapor deposition (MWCVD) conditions leading to ultra-thin diamond film formation, which is fundamental for many technological applications. The temporal evolution of the surface density of seeds on the Si(100) substrate has been assessed by scanning electron microscopy (SEM). The resulting kinetics have been explained in the framework of a model based on the effect of the particle size, according to the Young-Laplace equation, on both chemical potential of carbon atoms in DND and activation energy of the reaction with atomic hydrogen. The model describes the experimental kinetics of seeds' disappearance by assuming that nanodiamond particles with a size smaller than a "critical radius," r*, are etched away while those greater than r* can grow. Finally, the model allows to estimate the rate coefficients for growth and etching from the experimental kinetics.

Study IR- Raman Spectra properties of Aluminium Phosphide Diamondoids Nanostructures via DFT

Density Functional Theory has been utilized to investigate the electronic and structural characteristics of Aluminium phosphide (AlP). The exchange-correlation potential was calculated using the Generalized Gradient Approximation. The structural, electronic and vibrational features of AlP diamondoids and nanocrystals were investigated using Density Functional Theory at the PBE/6-31(d) level, which included polarization functions. Vibrational modes have been optimized concerning IR intensity, force constants, and lowered masses. In this study there are two components to the vibrational force constant for AlP diamondoids. The first one is distinguished by a reduced mass that is greater than 1 amu and consists primarily of Al-P vibrations that are positioned roughly between 0 and 231 cm-1. The second component has a decreased mass very near to 1 amu and is in the 1228–2400 cm–1 range. It is entirely made up of hydrogen vibrational modes. AlP diamondoids were evaluated with the results of experimental bulk in terms of molecular size-related changes in allocated vibrational frequencies.

Formation of Diamane Nanostructures in Bilayer Graphene on Langasite under Irradiation with a Focused Electron Beam

In the presented paper, we studied bilayer CVD graphene transferred to a langasite substrate and irradiated with a focused electron beam through a layer of polymethyl methacrylate (PMMA). Changes in the Raman spectra and an increase in the electrical resistance of bigraphene after irradiation indicate a local phase transition associated with graphene diamondization. The results are explained in the framework of the theory of a chemically induced phase transition of bilayer graphene to diamane, which can be associated with the release of hydrogen and oxygen atoms from PMMA and langasite due to the "knock-on" effect, respectively, upon irradiation of the structure with an electron beam. Theoretical calculations of the modified structure of bigraphene on langasite and the experimental evaluation of sp³-hybridized carbon fraction indicate the formation of diamane nanoclusters in the bigraphene irradiated regions. This result can be considered as the first realization of local tunable bilayer graphene diamondization.

Diamond formation mechanism in chemical vapor deposition

Artificial diamond plays a vital role in the manufacturing industry, jewelry, and future photoelectronic devices, but it is a key challenge to prepare the required large-area diamonds. A distinctive way to solve this problem possibly hides in the undiscovered formation mechanism of thermodynamically metastable diamond compared to graphite in low-pressure chemical vapor deposition. We design a series of short-term growth on the margins of cauliflower-like nanocrystalline diamond particles and find that diamond is formed by the transformation from graphite, not by the piling up of sp³ carbon. Atomically dispersed Ta atoms let the transition spontaneously occur. This subverts the general knowledge and supplies a way to prepare large-area diamonds based on large-sized graphite under normal pressure.

It is a key challenge to prepare large-area diamonds by using the methods of high-pressure high-temperature and normal chemical vapor deposition (CVD). The formation mechanism of thermodynamically metastable diamond compared to graphite in low-pressure CVD possibly implies a distinctive way to synthesize large-area diamonds, while it is an intriguing problem due to the limitation of in situ characterization in this complex growth environment. Here, we design a series of short-term growth on the margins of cauliflower-like nanocrystalline diamond particles, allowing us to clearly observe the diamond formation process. The results show that vertical graphene sheets and nanocrystalline diamonds alternatively appear, in which vertical graphene sheets evolve into long ribbons and graphite needles, and they finally transform into diamonds. A transition process from graphite (200) to diamond (110) verifies the transformation, and Ta atoms from hot filaments are found to atomically disperse in the films. First principle calculations confirm that Ta-added H- or O-terminated bilayer graphene spontaneously transforms into diamond. This reveals that in the H, O, and Ta complex atmosphere of the CVD environment, diamond is formed by phase transformation from graphite. This subverts the general knowledge that graphite is etched by hydrogen and sp³ carbon species pile up to form diamond and supplies a way to prepare large-area diamonds based on large-sized graphite under normal pressure. This also provides an angle to understand the growth mechanism of materials with sp² and sp³ electronic configurations.

Plasma Carburizing of Laser Powder Bed Fusion Manufactured 316 L Steel for Enhancing the Surface Hardness

Austenitic stainless steels produced by laser powder bed fusion (L-PBF) are quite interesting materials owing to their specific microstructure consisting of dendrite walls built of dislocations pinned by many nano-oxides that involves significant strengthening without loss of ductility. In this work, different plasma treatments were performed to harden the surface of 316 L steel manufactured by L-PBF. The samples were characterized by X-ray diffraction (XRD), Raman spectroscopy (RS), light microscopy (LM) and micro-hardness tests. The experimental results show that all the plasma treatments enhance the hardness of the surface because a C-enriched layer of austenite (S-phase) forms with a thickness up to 25 μm. The plasma gas mixture, consisting of 2.5% (CH4) + 97.5% (H2), resulted in being the most effective and produced a surface hardness (547 ± 27 HV) more than double with respect to that of the untreated material. The treatment temperature was 475 °C, which represents a good compromise between the necessity to avoid the precipitation of M23C6 carbides and the compatibility of treatment time with the industrial practice. Moreover, it has been observed that a 2 μm-thick over-layer of amorphous C forms on the sample surface. The hardness of such over-layer, which depends on the specific treatment and is related to the degree of topological disorder, is generally greater than that of S-phase. The work demonstrates that plasma carburizing is quite effective in hardening the surface of 316 L steel manufactured by L-PBF and further improves its mechanical properties, which are basically superior to those of the same material prepared by conventional processes.

Nucleation of diamond films on heterogeneous substrates: a review

Diamond thin films are known to have properties similar to bulk diamond and have applications in both industry and fundamental studies in academia. The high surface energy of diamond makes it extremely difficult to grow diamond films on foreign substrates. Hence, to grow diamond films on non-diamond substrates, a nucleation step is needed. In this review various techniques used for diamond nucleation/seeding will be discussed. At present electrostatic seeding by diamond nanoparticles is the most commonly used seeding technique for nanocrystalline growth. In this technique the substrate is dipped in a nanodiamond solution to form a mono layer of diamond seeds. These seeds when exposed to appropriate conditions grow to form diamond layers. This technique is suitable for most substrates. For heteroepitaxial growth, bias enhanced nucleation is the primary technique. In this technique the substrate is biased to form diamond nuclei in the initial stages of growth. This technique can be used for any conducting flat surface. For growth on ceramics, polishing by diamond grit or electrostatic seeding can be used. Polishing the ceramics with diamond powder leaves small diamond particles embedded in the substrate. These small particles then act as seeds for subsequent diamond growth. Apart from these techniques, chemical nucleation, interlayer driven nucleation and mixed techniques have been discussed. The advantages and disadvantages of individual techniques have also been discussed.

Growth of diamond film on heterogeneous substrates assisted by nucleation/seeding.

Diamond Deposition on Iron and Steel Substrates: A Review

This article presents an overview of the research in chemical vapor deposition (CVD) diamond films on steel substrates. Since the steels are the most commonly used and cost-effective structural materials in modern industry, CVD coating diamond films on steel substrates are extremely important, combining the unique surface properties of diamond with the superior toughness and strength of the core steel substrates, and will open up many new applications in the industry. However, CVD diamond deposition on steel substrates continues to be a persistent problem. We go through the most relevant results of the last two and a half decades, including recent advances in our group. This review discusses the essential reason of the thick catalytic graphite interlayer formed on steel substrates before diamond deposition. The high carbon diffusion in iron would induce severe internal carburization, and then voluminous graphite precipitated from the substrate. In order to hinder the catalytic graphite formation, various methods have been applied for the adherent diamond film deposition, such as pre-imposed various interlayers or multi-interlayers, special controls of the deposition process, the approaches of substrate alloying and so on. We found that adherent diamond films can be directly deposited on Al alloying steel substrates, and then the role of Al alloying element was examined. That is a thin dense amorphous alumina sublayer in situ formed on the alloying substrate, which played a critical role in preventing the formation of graphite phase and consequently enhancing diamond growth and adhesion. The mechanism of Al alloying suggests that the way used to improve hot corrosion resistance is also applicable. Then, some of the hot corrosion resistance methods, such as aluminizing, siliconizing, and so on, which have been used by some researchers examining CVD diamond films on steel substrates, are reviewed. Another way is to prepare diamond-like carbon (DLC) films on steel substrates at low temperature, and then the precipitated graphite from the internal carburization can be effectively avoided. In addition, based on some new findings, the understanding of the diamond nucleation and metastable growth is discussed.

Nanoscale boron carbonitride semiconductors for photoredox catalysis

The conversion of solar energy to chemical energy achieved by photocatalysts comprising homogeneous transition-metal based systems, organic dyes, or semiconductors has received significant attention in recent years. Among these photocatalysts, boron carbon nitride (BCN) materials, as an emerging class of metal-free heterogeneous semiconductors, have extended the scope of photocatalysts due to their good performance and Earth abundance. The combination of boron (B), carbon (C), and nitrogen (N) constitutes a ternary system with large surface area and abundant activity sites, which together contribute to the good performance for reduction reactions, oxidation reactions and orchestrated both reduction and oxidation reactions. This Minireview reports the methods for the synthesis of nanoscale hexagonal boron carbonitride (h-BCN) and describes the latest advances in the application of h-BCN materials as semiconductor photocatalysts for sustainable photosynthesis, such as water splitting, reduction of CO₂, acceptorless dehydrogenation, oxidation of sp³ C-H bonds, and sp² C-H functionalization. h-BCN materials may have potential for applications in other organic transformations and industrial manufacture in the future.

High-pressure, high-temperature molecular doping of nanodiamond

The development of color centers in diamond as the basis for emerging quantum technologies has been limited by the need for ion implantation to create the appropriate defects. We present a versatile method to dope diamond without ion implantation by synthesis of a doped amorphous carbon precursor and transformation at high temperatures and high pressures. To explore this bottom-up method for color center generation, we rationally create silicon vacancy defects in nanodiamond and investigate them for optical pressure metrology. In addition, we show that this process can generate noble gas defects within diamond from the typically inactive argon pressure medium, which may explain the hysteresis effects observed in other high-pressure experiments and the presence of noble gases in some meteoritic nanodiamonds. Our results illustrate a general method to produce color centers in diamond and may enable the controlled generation of designer defects.

In situ atomic-scale observation of irradiation induced carbon nanocrystalline formation from dense carbon clusters

We present a direct observation of the transformation of dense amorphous carbon clusters into diamond nanocrystalline under electron beam irradiation by in situ transmission electron microscopy, where the surrounding carbon matrix did not significantly change. Our findings provide clear and convincing evidence for the diamond nanocrystalline evolving from energetic amorphous carbon sites. Furthermore, graphitization of amorphous carbons usually demands a high temperature combined with high pressure. Hence, graphitization of amorphous carbons at relatively low temperatures is highly desired. Here we offer a useful method for catalyst-free graphitization of amorphous carbons by employing moderate electron beam irradiation, without external heating being applied.

Ultraviolet laser photolysis of hydrocarbons for nondiamond carbon suppression in chemical vapor deposition of diamond films

In this work, we demonstrate that ultraviolet (UV) laser photolysis of hydrocarbon species alters the flame chemistry such that it promotes the diamond growth rate and film quality. Optical emission spectroscopy and laser-induced fluorescence demonstrate that direct UV laser irradiation of a diamond-forming combustion flame produces a large amount of reactive species that play critical roles in diamond growth, thereby leading to enhanced diamond growth. The diamond growth rate is more than doubled, and diamond quality is improved by 4.2%. Investigation of the diamond nucleation process suggests that the diamond nucleation time is significantly shortened and nondiamond carbon accumulation is greatly suppressed with UV laser irradiation of the combustion flame in a laser-parallel-to-substrate geometry. A narrow amorphous carbon transition zone, averaging 4 nm in thickness, is identified at the film-substrate interface area using transmission electron microscopy, confirming the suppression effect of UV laser irradiation on nondiamond carbon formation. The discovery of the advantages of UV photochemistry in diamond growth is of great significance for vastly improving the synthesis of a broad range of technically important materials.

Ion bombardment induced buried lateral growth: the key mechanism for the synthesis of single crystal diamond wafers

A detailed mechanism for heteroepitaxial diamond nucleation under ion bombardment in a microwave plasma enhanced chemical vapour deposition setup on the single crystal surface of iridium is presented. The novel mechanism of Ion Bombardment Induced Buried Lateral Growth (IBI-BLG) is based on the ion bombardment induced formation and lateral spread of epitaxial diamond within a ~1 nm thick carbon layer. Starting from one single primary nucleation event the buried epitaxial island can expand laterally over distances of several microns. During this epitaxial lateral growth typically thousands of isolated secondary nuclei are generated continuously. The unique process is so far only observed on iridium surfaces. It is shown that a diamond single crystal with a diameter of ~90 mm and a weight of 155 carat can be grown from such a carbon film which initially consisted of 2 · 10¹³ individual grains.

Diamondoid-based molecular junctions: a computational study

In this work, we deal with the computational investigation of diamondoid-based molecular conductance junctions and their electronic transport properties. A small diamondoid is placed between the two gold electrodes of the nanogap and is covalently bonded to the gold electrodes through two different molecules, a thiol group and a N-heterocyclic carbene molecule. We have shown that the thiol linker is more efficient as it introduces additional electron paths for transport at lower energies. The influence of doping the diamondoid on the properties of the molecular junctions has been investigated. We find that using a nitrogen atom to dope the diamondoids leads to a considerable increase of the zero bias conductance. For the N-doped system we show an asymmetric feature of the I-V curve of the junctions resulting in rectification within a very small range of bias voltages. The rectifying nature is the result of the characteristic shift in the bias-dependent highest occupied molecular orbital state. In all cases, the efficiency of the device is manifested and is discussed in view of novel nanotechnological applications.

Carbene-mediated self-assembly of diamondoids on metal surfaces

N-heterocyclic carbenes (NHC)s are emerging as an alternative class of molecules to thiol-based self-assembled monolayers (SAMs), making carbene-based SAMs much more stable under harsh environmental conditions. In this work, we have functionalized tiny diamondoids using NHCs in order to prepare highly stable carbene-mediated diamondoid SAMs on metal substrates. Using quantum-mechanical simulations and two different configurations for the carbene-functionalized diamondoids attached on gold, silver, and platinum surfaces we were able to study in detail these materials. Specifically, we focus on the binding characteristics, stability, and adsorption of the NHC-mediated diamondoid SAMs on the metal surfaces. A preferential binding to platinum surfaces was found, while a modulation of the work function in all cases was clear. The surface morphology of all NHC-based diamondoid SAMs was revealed through simulated STM images, which show characteristic features for each surface.

Cytocompatibility of Si-incorporated TiO2 nanopores films

Si-incorporated TiO2 nanopores films were prepared by anodization and silicon plasma immersion ion implantation. The microstructure and phase composition of the films were investigated by scanning electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The hydrophilicity of the films was evaluated using water contact angle measurement and MG63 cells were cultured on the films to investigate the cytocompatibility. The results showed that the concentration and depth of silicon on the Si-incorporated TiO2 nanopores films increased with the duration time of implantation. Both the as-annealed and Si-incorporated nanopores films exhibited good hydrophilicity and cytocompatibility, while the TiO2 nanopores films implanted silicon for 1.0h showed higher proliferation rate and vitality of MG63 cells than others, indicating a great potential application for titanium implants.

Towards double-functionalized small diamondoids: selective electronic band-gap tuning

Diamondoids are nanoscale diamond-like cage structures with hydrogen terminations, which can occur in various sizes and with a diverse type of modifications. In this work, we focus on the structural alterations and the effect of doping and functionalization on the electronic properties of diamondoids, from the smallest adamantane to heptamantane. The results are based on quantum mechanical calculations. We perform a self-consistent study, starting with doping the smallest diamondoid, adamantane. Boron, nitrogen, silicon, oxygen, and phosphorus are chosen as dopants at sites which have been previously optimized and are also consistent with the literature. At a next step, an amine- and a thiol- group are separately used to functionalize the adamantane molecule. We mainly focus on a double functionalization of diamondoids up to heptamantane using both these atomic groups. The effect of isomeration in the case of tetramantane is also studied. We discuss the higher efficiency of a double-functionalization compared to doping or a single-functionalization of diamondoids in tuning the electronic properties, such as the electronic band-gap, of modified small diamondoids in view of their novel nanotechnological applications.

Short term exposure of beta cells to low concentrations of interleukin-1β improves insulin secretion through focal adhesion and actin remodeling and regulation of gene expression

Type 2 diabetes involves defective insulin secretion with islet inflammation governed in part by IL-1β. Prolonged exposure of islets to high concentrations of IL-1β (>24 h, 20 ng/ml) impairs beta cell function and survival. Conversely, exposure to lower concentrations of IL-1β for >24 h improves these same parameters. The impact on insulin secretion of shorter exposure times to IL-1β and the underlying molecular mechanisms are poorly understood and were the focus of this study. Treatment of rat primary beta cells, as well as rat or human whole islets, with 0.1 ng/ml IL-1β for 2 h increased glucose-stimulated (but not basal) insulin secretion, whereas 20 ng/ml was without effect. Similar differential effects of IL-1β depending on concentration were observed after 15 min of KCl stimulation but were prevented by diazoxide. Studies on sorted rat beta cells indicated that the enhancement of stimulated secretion by 0.1 ng/ml IL-1β was mediated by the NF-κB pathway and c-JUN/JNK pathway acting in parallel to elicit focal adhesion remodeling and the phosphorylation of paxillin independently of upstream regulation by focal adhesion kinase. Because the beneficial effect of IL-1β was dependent in part upon transcription, gene expression was analyzed by RNAseq. There were 18 genes regulated uniquely by 0.1 but not 20 ng/ml IL-1β, which are mostly involved in transcription and apoptosis. These results indicate that 2 h of exposure of beta cells to a low but not a high concentration of IL-1β enhances glucose-stimulated insulin secretion through focal adhesion and actin remodeling, as well as modulation of gene expression.

Mass spectrometric investigation of the roles of several chemical intermediates in diamond synthesis

Mass spectrometric studies were performed to investigate several key chemical intermediates and identify their roles in diamond synthesis in a C₂H₄/C₂H₂/O₂ combustion-flame chemical vapour deposition process.

Direct laser writing of nanodiamond films from graphite under ambient conditions

Synthesis of diamond, a multi-functional material, has been a challenge due to very high activation energy for transforming graphite to diamond, and therefore, has been hindering it from being potentially exploited for novel applications. In this study, we explore a new approach, namely confined pulse laser deposition (CPLD), in which nanosecond laser ablation of graphite within a confinement layer simultaneously activates plasma and effectively confine it to create a favorable condition for nanodiamond formation from graphite. It is noteworthy that due to the local high dense confined plasma created by transparent confinement layer, nanodiamond has been formed at laser intensity as low as 3.7 GW/cm(2), which corresponds to pressure of 4.4 GPa, much lower than the pressure needed to transform graphite to diamond traditionally. By manipulating the laser conditions, semi-transparent carbon films with good conductivity (several kΩ/Sq) were also obtained by this method. This technique provides a new channel, from confined plasma to solid, to deposit materials that normally need high temperature and high pressure. This technique has several important advantages to allow scalable processing, such as high speed, direct writing without catalyst, selective and flexible processing, low cost without expensive pico/femtosecond laser systems, high temperature/vacuum chambers.

Mechanism for direct graphite-to-diamond phase transition

Using classical molecular dynamics with a more reliable reactive LCBOPII potential, we have performed a detailed study on the direct graphite-to-diamond phase transition. Our results reveal a new so-called "wave-like buckling and slipping" mechanism, which controls the transformation from hexagonal graphite to cubic diamond. Based on this mechanism, we have explained how polycrystalline cubic diamond is converted from hexagonal graphite, and demonstrated that the initial interlayer distance of compressed hexagonal graphite play a key role to determine the grain size of cubic diamond. These results can broaden our understanding of the high pressure graphite-to-diamond phase transition.

Radiation-Induced Nucleation of Diamond from Amorphous Carbon: Effect of Hydrogen

Electron irradiation of anthracite functionalized by dodecyl groups leads to recrystallization of the carbon network into diamonds. The diamonds range in size from ∼2 to ∼10 nm and exhibit {111} spacing of 2.1 Å. A bulk process consistent with bias-enhanced nucleation is proposed in which the dodecyl group provides hydrogen during electron irradiation. Recrystallization into diamond occurs in the hydrogenated graphitic subsurface layers. Unfunctionalized anthracite could not be converted into diamond during electron irradiation. The dependence of the phase transition pressure on cluster size was estimated, and it was found that diamond particles with a radius up to 20 nm could be formed.

Phase diagram of quasi-two-dimensional carbon, from graphene to diamond

We explore how a few-layer graphene can undergo phase transformation into thin diamond film under reduced or no pressure, if the process is facilitated by hydrogenation of the surfaces. Such a "chemically induced phase transition" is inherently nanoscale phenomenon, when the surface conditions directly affect thermodynamics, and the transition pressure depends greatly on film thickness. For the first time we obtain, by ab initio computations of the Gibbs free energy, a phase diagram (P, T, h) of quasi-two-dimensional carbon-diamond film versus multilayered graphene. It describes accurately the role of film thickness h and shows the feasibility of creating novel quasi-two-dimensional materials. Further, the role of finite diameter of graphene flakes and possible formation of the diamond films with the (110) surface are described as well.

Lonsdaleite Films with Nanometer Thickness

We investigate the properties of potentially the stiffest quasi-2-D films with lonsdaleite structure. Using a combination of ab initio and empirical potential approaches, we analyze the elastic properties of lonsdaleite films in both elastic and inelastic regimes and compare them with graphene and diamond films. We review possible fabrication methods of lonsdaleite films using the pure nanoscale "bottom-up" paradigm: by connecting carbon layers in multilayered graphene. We propose the realization of this method in two ways: by applying direct pressure and by using the recently proposed chemically induced phase transition. For both cases, we construct the phase diagrams depending on temperature, pressure, and film thickness. Finally, we consider the electronic properties of lonsdaleite films and establish the nonlinear dependence of the band gap on the films' thicknesses and their lower effective masses in comparison with bulk crystal.

Charged particle-induced synthesis of carbon nanowalls and characterization

High deposition rate, control of domain size, detailed characterization and charged particle-induced growth mechanism of CNW films are reported.

Disorder and optical gaps in strained dense amorphous carbon and diamond nanocomposites

We employ empirical tight-binding simulations on strained tetrahedral amorphous carbon and diamond nanocomposite networks. For each applied strain, the optoelectronic properties are monitored through the absorption coefficient and the dielectric function. These lead to the optical gaps and are able to quantify the amount of disorder in the structures. We compare our results to those of unstrained nanostructured diamond and amorphous carbon (a-C) phases and link the degree of disorder in these materials to their structural details as a function of the external load. The atomic rearrangements and distortions imposed by the external strain in these structures are directly observable in their optoelectronic properties. We thoroughly discuss the interplay between increased external strain, structural and topological disorder, atomic rearrangements and their effect on the calculated optoelectronic properties.

Amorphous diamond: a high-pressure superhard carbon allotrope

Compressing glassy carbon above 40 GPa, we have observed a new carbon allotrope with a fully sp(3)-bonded amorphous structure and diamondlike strength. Synchrotron x-ray Raman spectroscopy revealed a continuous pressure-induced sp(2)-to-sp(3) bonding change, while x-ray diffraction confirmed the perseverance of noncrystallinity. The transition was reversible upon releasing pressure. Used as an indenter, the glassy carbon ball demonstrated exceptional strength by reaching 130 GPa with a confining pressure of 60 GPa. Such an extremely large stress difference of >70 GPa has never been observed in any material besides diamond, indicating the high hardness of this high-pressure carbon allotrope.

The impact of diamond nanocrystallinity on osteoblast functions

Nanocrystalline diamond has been proposed as an anti-abrasive film on orthopedic implants. In this study, osteoblast (bone forming cells) functions including adhesion (up to 4h), proliferation (up to 5 days) and differentiation (up to 21 days) on different diamond film topographies were systematically investigated. In order to exclude interferences from changes in surface chemistry and wettability (energy), diamond films with nanometer and micron scale topographies were fabricated through microwave plasma enhanced chemical-vapor-deposition and hydrogen plasma treatment. Scanning electron microscopy (SEM), atomic force microscopy (AFM), Raman spectroscopy and water contact angle measurements verified the similar surface chemistry and wettability but varied topographies for all of the diamond films prepared on silicon in this study. Cytocompatibility assays demonstrated enhanced osteoblast functions (including adhesion, proliferation, intracellular protein synthesis, alkaline phosphatase activity and extracellular calcium deposition) on nanocrystalline diamond compared to submicron diamond grain size films for all time periods tested up to 21 days. An SEM study of osteoblast attachment helped to explain the topographical impact diamond had on osteoblast functions by showing altered filopodia extensions on the different diamond topographies. In summary, these results provided insights into understanding the role diamond nanotopography had on osteoblast interactions and more importantly, the application of diamond films to improve orthopedic implant lifetimes.

Engineering of nanostructured carbon materials with electron or ion beams

Irradiating solids with energetic particles is usually thought to introduce disorder, normally an undesirable phenomenon. But recent experiments on electron or ion irradiation of various nanostructures demonstrate that it can have beneficial effects and that electron or ion beams may be used to tailor the structure and properties of nanosystems with high precision. Moreover, in many cases irradiation can lead to self-organization or self-assembly in nanostructures. In this review we survey recent advances in the rapidly evolving area of irradiation effects in nanostructured materials, with particular emphasis on carbon systems because of their technological importance and the unique ability of graphitic networks to reconstruct under irradiation. We dwell not only on the physics behind irradiation of nanostructures but also on the technical applicability of irradiation for nanoengineering of carbon and other systems.

Reactivity of [1(2,3)4]Pentamantane (Td-Pentamantane): A Nanoscale Model of Diamond

To model the chemical properties of the hydrogen-terminated nanodiamond {111} and {110} surfaces, the functionalizations of the higher diamondoid [1(2,3)4]pentamantane were studied. [1(2,3)4]Pentamantane reacts selectively with neat bromine to give the medial 2-mono- and 2,4-disubstitution products. In contrast, oxidation with nitric acid as well as single-electron-transfer oxidation involving the [1(2,3)4]pentamantane radical cation results in apical C7-substitutions. This substitution pattern dominates in the free-radical bromination under phase-transfer catalytic conditions that gives a mixture of 7- and 2-bromo[1(2,3)4]pentamantane in a 95:5 ratio. Replacement of the functional groups in [1(2,3)4]pentamantane occurs without isomerization. This was demonstrated for the interconversions of the bromo and hydroxy derivatives as well as for the preparation of [1(2,3)4]pentamantyl-7-thiol from 7-hydroxy[1(2,3)4]pentamantane. Thus, the selective functionalization of hydrogen-terminated nanodiamonds is possible by means of reactions with common electrophiles-oxidizers.

Insights into the fracture mechanisms and strength of amorphous and nanocomposite carbon

Tight-binding molecular dynamics simulations shed light into the fracture mechanisms and the ideal strength of tetrahedral amorphous carbon and of nanocomposite carbon containing diamond crystallites, two of the hardest materials. It is found that fracture in the nanocomposites, under tensile or shear load, occurs intergrain and so their ideal strength is similar to the pure amorphous phase. The onset of fracture takes place at weakly bonded sites in the amorphous matrix. On the other hand, the nanodiamond inclusions significantly enhance the elastic moduli, which approach those of diamond.

Thermodynamics of Diamond Nucleation on the Nanoscale

To have a clear insight into the diamond nucleation upon the hydrothermal synthesis and the reduction of carbide (HSRC), we performed the thermodynamic approach on the nanoscale to elucidate the diamond nucleation taking place in HSRC supercritical-fluid systems taking into account the capillary effect of the nanosized curvature of the diamond critical nuclei, based on the carbon thermodynamic equilibrium phase diagram. These theoretical analyses showed that the nanosize-induced interior pressure of diamond nuclei could drive the metastable phase region of the diamond nucleation in HSRC into the new stable phase region of diamond in the carbon phase diagram. Accordingly, the diamond nucleation is preferable to the graphite phase formation in the competing growth between diamond and graphite upon HSRC. Meanwhile, we predicted that 400 MPa should be the threshold pressure for the diamond synthesis by HSRC in the metastable phase region of diamond, based on the proposed thermodynamic nucleation on the nanoscale.

Visualization of diamond nucleation and growth from energetic species

The mystery of diamond nucleation by energetic species is resolved via a special deposition scheme. The evolution of the precursor material for diamond nucleation and the development of the nanodiamond crystallites are visualized by high resolution electron microscopy and other spectroscopies. The diamond precipitation and growth are explained in terms of our recently proposed mechanism [Science 297, 1531 (2002)]]: (i) precipitation of sp(3) clusters a small fraction of which are perfect diamond; (ii) growth of diamond crystallites by preferential displacement of amorphous carbon atoms leaving diamond atoms intact. This general scheme is applicable to other materials such as cubic boron nitride.

Isolation and structure of higher diamondoids, nanometer-sized diamond molecules

We exploited the exceptional thermal stability and diverse molecular shapes of higher diamondoids (C22 and higher polymantanes) to isolate them from petroleum. Molecules containing 4 to 11 diamond-crystal cages were isolated and crystallized, and we obtained single-crystal x-ray structures for representatives from three families. Rigidity, strength, remarkable assortments of three- dimensional shapes, including resolvable chiral forms, and multiple, readily derivatizable attachment sites make them valuable nanometer-size molecular building blocks.