Temperature induced single-crystal to single-crystal transformation of uranium azide complexes

The monomeric and dimeric uranium azide complexes {[(CH3)2NCH2CH2NPiPr2]2U(N3)2} (2) and {[(CH3)2NCH2CH2NPiPr2]2U(N3)2}2 (3) were synthesized by treating complex 1 with NaN3 at 60 and -20 °C, respectively. A temperature-induced single-crystal to single-crystal transformation of 3 to 2 was observed. The reduction of either 2 or 3 with KC8 yields a uranium nitride complex {[(CH3)2NCH2CH2NPiPr2]4U2(μ-N)2} (4).

Tuning the visible colour of octahedral manganese(III) phthalocyanines via axial ligand exchange

A series of [PcMnL2]SbF6 complexes (Pc = phthalocyanine) was synthesized and structurally characterized by stripping the chloride from PcMnCl with AgSbF6 in o-dichlorobenzene and adding a range of donor ligands (L = THF, pyridine, p-dimethylaminopyridine (DMAP), Ph3PO, N-methylimidazole (MeIm), MeCN) to the resulting solution. Addition of or exposure to water where L = heterocyclic amines yielded μ-oxo complexes of the form [PcMnL]2O, which were structurally characterized for L = DMAP and MeIm. The [PcMnL2]SbF6 complexes have an increased solubility in organic solvents, where the axial ligands inhibit the characteristic ring π-π aggregation of PcM complexes. A variety of colours were observed (blue/green to red/purple), with Q-band absorptions (excluding the μ-oxo species) spanning from 715-761 nm and LMCT-bands from 497-574 nm. The combination of the ligand-induced absorption shifts coupled with their relative intensities in the visible region is responsible for the observed colour range and illustrates that facile ligand exchange is a useful tool in producing materials with a variety of colours from PcMnCl.

Linkage conversions in single-crystalline covalent organic frameworks

Single-crystal X-ray diffraction is a powerful characterization technique that enables the determination of atomic arrangements in crystalline materials. Growing or retaining large single crystals amenable to it has, however, remained challenging with covalent organic frameworks (COFs), especially suffering from post-synthetic modifications. Here we show the synthesis of a flexible COF with interpenetrated qtz topology by polymerization of tetra(phenyl)bimesityl-based tetraaldehyde and tetraamine building blocks. The material is shown to be flexible through its large, anisotropic positive thermal expansion along the c axis (αc = +491 × 10-6 K-1), as well as through a structural transformation on the removal of solvent molecules from its pores. The as-synthesized and desolvated materials undergo single-crystal-to-single-crystal transformation by reduction and oxidation of its imine linkages to amine and amide ones, respectively. These redox-induced linkage conversions endow the resulting COFs with improved stability towards strong acid; loading of phosphoric acid leads to anhydrous proton conductivity up to ca. 6.0 × 10-2 S cm-1.

Observation of Interpenetrated Topology Isomerism for Covalent Organic Frameworks with Atom-Resolution Single Crystal Structures

Rational control and understanding of isomerism are of significance but still remain a great challenge in reticular frameworks, in particular, for covalent organic frameworks (COFs) due to the complicated synthesis and energy factors. Herein, reaction of 3,3',5,5'-tetra(4-formylphenyl)-2,2',6,6'-tetramethoxy-1,1'-biphenyl (TFTB) with 3,3',5,5'-tetrakis(4-aminophenyl)bimesityl (TAPB) under different reaction conditions affords single crystals of two 3D COF isomers, namely, USTB-20-dia and USTB-20-qtz. Their structures with resolutions up to 0.9-1.1 Å have been directly solved by three-dimensional electron diffraction (3D ED) and synchrotron single crystal X-ray diffraction, respectively. USTB-20-dia and USTB-20-qtz show rare 2 × 2-fold interpenetrated dia-b nets and 3-fold interpenetrated qtz-b frameworks. Comparative studies of the crystal structures of these COFs and theoretical simulation results indicate the crucial role of the flexible molecular configurations of building blocks in the present interpenetrated topology isomerism. This work not only presents the rare COF isomers but also gains an understanding of the formation of framework isomerism from both single crystal structures and theoretical simulation perspectives.

Dioxygen Activation and Reduction by a Soluble Iron Phthalocyanine

Iron ions in a square-planar coordination can bind molecules at the vacant axial positions and are able to transform them in stoichiometric and catalytic reactions. Nature takes advantage of these properties by incorporating iron into porphyrin systems, which play a key role not only in the binding and transport of oxygen, but also in catalytic oxidation and reduction reactions involving cytochrome P450. Although these systems have been studied extensively, there are still unresolved questions regarding the interplay between the iron ions and the surrounding ligands. Phthalocyanines (Pc) create a similar environment for metal atoms and FePc is known for a long time. However, without axial ligands FePc aggregates leading to solids of low solubility. In this work we used a known six-coordinate iron phthalocyanine derivative with bulky substituents and removed the stabilizing axial ligands. The resulting paramagnetic, four-coordinate compound does not aggregate and dissolves well so that NMR spectroscopy can be employed for studying the molecular structure and the reactivity. Solvent molecules bind weakly to the iron centers and oxygen is reduced in the presence of H-atom donors. The stoichiometric and catalytic reactivity with oxygen was studied in more detail.

Porous Organic Cages

Porous organic cages (POCs) are a relatively new class of low-density crystalline materials that have emerged as a versatile platform for investigating molecular recognition, gas storage and separation, and proton conduction, with potential applications in the fields of porous liquids, highly permeable membranes, heterogeneous catalysis, and microreactors. In common with highly extended porous structures, such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and porous organic polymers (POPs), POCs possess all of the advantages of highly specific surface areas, porosities, open pore channels, and tunable structures. In addition, they have discrete molecular structures and exhibit good to excellent solubilities in common solvents, enabling their solution dispersibility and processability─properties that are not readily available in the case of the well-established, insoluble, extended porous frameworks. Here, we present a critical review summarizing in detail recent progress and breakthroughs─especially during the past five years─of all the POCs while taking a close look at their strategic design, precise synthesis, including both irreversible bond-forming chemistry and dynamic covalent chemistry, advanced characterization, and diverse applications. We highlight representative POC examples in an attempt to gain some understanding of their structure-function relationships. We also discuss future challenges and opportunities in the design, synthesis, characterization, and application of POCs. We anticipate that this review will be useful to researchers working in this field when it comes to designing and developing new POCs with desired functions.

Energy‐Efficient Iodine Uptake by a Molecular Host⋅Guest Crystal

Recently, porous organic crystals (POC) based on macrocycles have shown exceptional sorption and separation properties. Yet, the impact of guest presence inside a macrocycle prior to adsorption has not been studied. Here we show that the inclusion of trimethoxybenzyl-azaphosphatrane in the macrocycle cucurbit[8]uril (CB[8]) affords molecular porous host⋅guest crystals (PHGC-1) with radically new properties. Unactivated hydrated PHGC-1 adsorbed iodine spontaneously and selectively at room temperature and atmospheric pressure. The absence of (i) heat for material synthesis, (ii) moisture sensitivity, and (iii) energy-intensive steps for pore activation are attractive attributes for decreasing the energy costs. ¹ H NMR and DOSY were instrumental for monitoring the H₂ O/I₂ exchange. PHGC-1 crystals are non-centrosymmetric and I₂ -doped crystals showed markedly different second harmonic generation (SHG), which suggests that iodine doping could be used to modulate the non-linear optical properties of porous organic crystals.

Solvent-Triggered Fast and Visible Switching between Cage- and Channel-Type Hydrogen-Bonded Organic Frameworks

The inherent weak bonding nature of hydrogen-bonded organic frameworks (HOFs) performs like a double-edged sword in that it endows HOFs with superiority in processability and dynamicity but deactivates its on-demand controllability in the crystalline phase. Herein, based on the synergy of dynamic H-bonding interactions and the tailored low solubility in common organic solvents, reversible and fast topological transitions between cage- and channel-type HOFs were achieved upon immersing in the solution state. The aggregation-induced-emission character of the tecton facilitates the visualization of the elusive initial transition process with high sensitivity. In addition, the visible transition from cage- and channel-type HOFs to thermally stable crystalline phases is also achieved under thermal induction.

Multiple yet switchable hydrogen-bonded organic frameworks with white-light emission

The development of new strategies to construct on-demand porous lattice frameworks from simple motifs is desirable. However, mitigating complexity while combing multiplicity and reversibility in the porous architectures is a challenging task. Herein, based on the synergy of dynamic intermolecular interactions and flexible molecular conformation of a simple cyano-modified tetraphenylethylene tecton, eleven kinetic-stable hydrogen-bonded organic frameworks (HOFs) with various shapes and two thermo-stable non-porous structures with rare perpendicular conformation are obtained. Multimode reversible structural transformations along with visible fluorescence output between porous and non-porous or between different porous forms is realized under different external stimuli. Furthermore, the collaborative of flexible framework and soft long-chain guests facilitate the relaxation from intrinsic blue emission to yellow emission in the excited state, which represents a strategy for generating white-light emission. The dynamic intermolecular interactions, facilitated by flexible molecular conformation and soft guests, diversifies the strategies of construction of versatile smart molecular frameworks.

Switchable hydrogen-bonded frameworks have potential applications in the development of smart materials. Herein, the authors report eleven hydrogen-bonded organic frameworks and two non-porous structures that can undergo reversible structural and fluorescence switching; white-light emission is enabled.

Luminescent organic porous crystals from non-cyclic molecules and their applications

Organic porous crystals from small and non-cyclic organic molecules can be constructed by various intermolecular weak interactions. Owing to their precise stacking types, intermolecular interaction and pore microstructure, the relationship...

Solvophobicity-directed assembly of microporous molecular crystals

Dense packing is a universal tendency of organic molecules in the solid state. Typical porous crystals utilize reticular strong intermolecular bonding networks to overcome this principle. Here, we report a solvophobicity-based methodology for assembling discrete molecules into a porous form and succeed in synthesizing isostructural porous polymorphs of an amphiphilic aromatic molecule Py₆Mes. A computational analysis of the crystal structure reveals the major contribution of dispersion interaction as the driving force for assembling Py₆Mes into a columnar stacking while the columns are sterically salient and form nanopores between them. The porous packing is facilitated particularly in solvents with weak dispersion interaction due to the solvophobic effect. Conversely, solvents with strong dispersion interaction intercalate between Py₆Mes due to the solvophilic effect and provide non-porous inclusion crystals. The solvophobicity-directed polymorphism is further corroborated by the polymorphs of Py₆Mes-analogues, m-Py₆Mes and Ph₆Mes.

Zinc-[7]helicenocyanine and Its Discrete π-Stacked Homochiral Dimer

In this communication, we demonstrate a novel approach to prepare a discrete dimer of chiral phthalocyanine (Pc) by exploiting the flexible molecular geometry of helicenes, which enables structural interlocking and strong aggregation tendency of Pcs. Synthesized [7]helicene‐Pc hybrid molecular structure, zinc‐[7]helicenocyanine (Zn‐7HPc), exclusively forms a stable dimeric pair consisting of two homochiral molecules. The dimerization constants were estimated to be as high as 8.96×10⁶ M⁻¹ and 3.42×10⁷ M⁻¹ in THF and DMSO, respectively, indicating remarkable stability of dimer. In addition, Zn‐7HPc exhibited chiral self‐sorting behavior, which resulted in preferential formation of a homochiral dimer also in the racemic sample. Two phthalocyanine subunits in the dimeric form strongly communicate with each other as revealed by a large comproportionation constant and observation of an IV‐CT band for the thermodynamically stable mixed‐valence state.

Isoreticular Crystallization of Highly Porous Cubic Covalent Organic Cage Compounds*

Modular frameworks featuring well-defined pore structures in microscale domains establish tailor-made porous materials. For open molecular solids however, maintaining long-range order after desolvation is inherently challenging, since packing is usually governed by only a few supramolecular interactions. Here we report on two series of nanocubes obtained by co-condensation of two different hexahydroxy tribenzotriquinacenes (TBTQs) and benzene-1,4-diboronic acids (BDBAs) with varying linear alkyl chains in 2,5-position. n-Butyl groups at the apical position of the TBTQ vertices yielded soluble model compounds, which were analyzed by mass spectrometry and NMR spectroscopy. In contrast, methyl-substituted cages spontaneously crystallized as isostructural and highly porous solids with BET surface areas and pore volumes of up to 3426 m2  g-1 and 1.84 cm3  g-1 . Single crystal X-ray diffraction and sorption measurements revealed an intricate cubic arrangement of alternating micro- and mesopores in the range of 0.97-2.2 nm that are fine-tuned by the alkyl substituents at the BDBA linker.

Robust Supramolecular Nano-Tunnels Built from Molecular Bricks*

Herein we report a linear ionic molecule that assembles into a supramolecular nano-tunnel structure through synergy of trident-type ionic interactions and π-π stacking interactions. The nano-tunnel crystal exhibits anisotropic guest adsorption behavior. The material shows good thermal stability and undergoes multi-stage single-crystal-to-single-crystal phase transformations to a nonporous structure on heating. The material exhibits a remarkable chemical stability under both acidic and basic conditions, which is rarely observed in supramolecular organic frameworks and is often related to structures with designed hydrogen-bonding interactions. Because of the high polarity of the tunnels, this molecular crystal also shows a large CO₂ -adsorption capacity while excluding other gases at ambient temperature, leading to high CO₂ /CH₄ selectivity. Aggregation-induced emission of the molecules gives the bulk crystals vapochromic properties.

Synergy of Electrostatic and π-π Interactions in the Realization of Nanoscale Artificial Photosynthetic Model Systems

In the scientific race to build up photoactive electron donor-acceptor systems with increasing efficiencies, little is known about the interplay of their building blocks when integrated into supramolecular nanoscale arrays, particularly in aqueous environments. Here, we describe an aqueous donor-acceptor ensemble whose emergence as a nanoscale material renders it remarkably stable and efficient. We have focused on a tetracationic zinc phthalocyanine (ZnPc) featuring pyrenes, which shows an unprecedented mode of aggregation, driven by subtle cooperation between electrostatic and π-π interactions. Our studies demonstrate monocrystalline growth in solution and a symmetry-breaking intermolecular charge transfer between adjacent ZnPcs upon photoexcitation. Immobilizing a negatively charged fullerene (C60 ) as electron acceptor onto the monocrystalline ZnPc assemblies was found to enhance the overall stability, and to suppress the energy-wasting charge recombination found in the absence of C60 . Overall, the resulting artificial photosynthetic model system exhibits a high degree of preorganization, which facilitates efficient charge separation and subsequent charge transport.

Sigmoidally hydrochromic molecular porous crystal with rotatable dendrons

Vapochromic behaviour of porous crystals is beneficial for facile and rapid detection of gaseous molecules without electricity. Toward this end, tailored molecular designs have been established for metal-organic, covalent-bonded and hydrogen-bonded frameworks. Here, we explore the hydrochromic chemistry of a van der Waals (VDW) porous crystal. The VDW porous crystal VPC-1 is formed from a novel aromatic dendrimer having a dibenzophenazine core and multibranched carbazole dendrons. Although the constituent molecules are connected via VDW forces, VPC-1 maintains its structural integrity even after desolvation. VPC-1 exhibits reversible colour changes upon uptake/release of water molecules due to the charge transfer character of the constituent dendrimer. Detailed structural analyses reveal that the outermost carbazole units alone are mobile in the crystal and twist simultaneously in response to water vapour. Thermodynamic analysis suggests that the sigmoidal water sorption is induced by the affinity alternation of the pore surface from hydrophobic to hydrophilic.

Noncovalent π-stacked robust topological organic framework

Organic frameworks (OFs) offer a novel strategy for assembling organic semiconductors into robust networks that facilitate transport, especially the covalent organic frameworks (COFs). However, poor electrical conductivity through covalent bonds and insolubility of COFs limit their practical applications in organic electronics. It is known that the two-dimensional intralayer π∙∙∙π transfer dominates transport in organic semiconductors. However, because of extremely labile inherent features of noncovalent π∙∙∙π interaction, direct construction of robust frameworks via noncovalent π∙∙∙π interaction is a difficult task. Toward this goal, we report a robust noncovalent π∙∙∙π interaction-stacked organic framework, namely πOF, consisting of a permanent three-dimensional porous structure that is held together by pure intralayer noncovalent π∙∙∙π interactions. The elaborate porous structure, with a 1.69-nm supramaximal micropore, is composed of fully conjugated rigid aromatic tetragonal-disphenoid-shaped molecules with four identical platforms. πOF shows excellent thermostability and high recyclability and exhibits self-healing properties by which the parent porosity is recovered upon solvent annealing at room temperature. Taking advantage of the long-range π∙∙∙π interaction, we demonstrate remarkable transport properties of πOF in an organic-field-effect transistor, and the mobility displays relative superiority over the traditional COFs. These promising results position πOF in a direction toward porous and yet conductive materials for high-performance organic electronics.

A novel Fe-hemin-metal organic frameworks supported on chitosan-reduced graphene oxide for real-time monitoring of H2O2 released from living cells

Herein, a kind of novel hemin-based metal organic frameworks (Fe-hemin-MOFs) with unique peroxidase-like bioactivity was developed for the first time. The synthesized Fe-hemin-MOFs exhibited satisfactory catalytic activity toward hydrogen peroxide (H₂O₂). When it was further supported on Chitosan-reduced graphene oxide (CS-rGO), amplified electrochemical signal could be obtained. The Fe-hemin-MOFs/CS-rGO composite was used to construct a novel H₂O₂ electrochemical sensor. The electrocatalytic reduction of H₂O₂ displayed two segments linearity range from 1 to 61 μM and 61-1311 μM, as well as a low detection limit of 0.57 μM. Furthermore, the proposed sensor was successfully used for real-time monitoring of H₂O₂ released from living cells, which extended the practical application of MOFs-based sensors in monitoring the pathological process in living cells.

Isolating reactive metal-based species in Metal-Organic Frameworks - viable strategies and opportunities

Structural insight into reactive species can be achieved via strategies such as matrix isolation in frozen glasses, whereby species are kinetically trapped, or by confinement within the cavities of host molecules. More recently, Metal-Organic Frameworks (MOFs) have been used as molecular scaffolds to isolate reactive metal-based species within their ordered pore networks. These studies have uncovered new reactivity, allowed observation of novel metal-based complexes and clusters, and elucidated the nature of metal-centred reactions responsible for catalysis. This perspective considers strategies by which metal species can be introduced into MOFs and highlights some of the advantages and limitations of each approach. Furthermore, the growing body of work whereby reactive species can be isolated and structurally characterised within a MOF matrix will be reviewed, including discussion of salient examples and the provision of useful guidelines for the design of new systems. Novel approaches that facilitate detailed structural analysis of reactive chemical moieties are of considerable interest as the knowledge garnered underpins our understanding of reactivity and thus guides the synthesis of materials with unprecedented functionality.

Dinitrogen activation by a penta-pyridyl molybdenum complex

A new dinitrogen (N₂) molybdenum(0) complex supported exclusively by pyridine ligands was synthesized.

Self-assembly of azaphthalocyanine–oligodeoxynucleotide conjugates into J-dimers: towards biomolecular logic gates

Unique spatial self-assembly of azaphthalocyanine–oligonucleotide–fluorescein conjugates can be selectively dissociated by a complementary sequence or coordinating solvent and used for the development of biomolecular logic gates.

π-π stacking interactions: Non-negligible forces for stabilizing porous supramolecular frameworks

Revealing the contribution of π-π stacking interactions in supramolecular assembly is important for understanding the intrinsic nature of molecular assembly fundamentally. However, because they are much weaker than covalent bonds, π-π stacking interactions are usually ignored in the construction of porous materials. Obtaining stable porous materials that are only dependent on π-π stacking interactions, despite being very challenging, could address this concern. Here, we present a porous supramolecular framework (π-1) stabilized only by intermolecular π-π stacking interactions. π-1 shows good thermal and chemical stability not only in various organic solvents but also in aqueous solution in a broad pH range. Furthermore, featuring one-dimensional channels with dangling thiolate groups, π-1 exhibits excellent Hg2+ removal performance, with adsorption capacity as high as 786.67 mg g-1 and an adsorption ratio as high as 99.998%. In addition, π-1 also shows high adsorption selectivity to Hg2+ in the presence of a series of interfering ions.

The first example of the stereoselective synthesis and crystal structure of a spirobicycloquinazolinone based on (-)-fenchone and anthranilamide

The possibility of a single-stage solvent-free stereoselective synthesis of a spirocyclic compound from the natural bicyclic monoterpenoid (-)-fenchone and anthranilamide has been shown for the first time. The molecular and crystal structure of (1R,2S,4S)-1,3,3-trimethyl-1'H-spiro[bicyclo[2.2.1]heptane-2,2'-quinazolin]-4'(3'H)-one, C₁₇H₂₂N₂O, was established by X-ray diffraction though the chirality was assumed via the known reactant connectivity and ¹H and ¹³C NMR spectroscopy. It has shown that in the molecule, for steric reasons, there is an elongation of the Me₂C-C(N)N bond to 1.603 (5) Å. The formation of dimers via N-H...O=C hydrogen bonds with an interaction energy of 93.30 kJ mol^-1 and through cavities (33.7% of the unit-cell volume) was established in the packing of the molecules. There are no π-stacking interactions in the structure.

Understanding Gas Storage in Cuboctahedral Porous Coordination Cages

Porous molecular solids are promising materials for gas storage and gas separation applications. However, given the relative dearth of structural information concerning these materials, additional studies are vital for further understanding their properties and developing design parameters for their optimization. Here, we examine a series of isostructural cuboctahedral, paddlewheel-based coordination cages, M₂₄(^tBu-bdc)₂₄ (M = Cr, Mo, Ru; ^tBu-bdc^2- = 5-tert-butylisophthalate), for high-pressure methane storage. As the decrease in crystallinity upon activation of these porous molecular materials precludes diffraction studies, we turn to a related class of pillared coordination cage-based metal-organic frameworks, M₂₄(Me-bdc)₂₄(dabco)₆ (M = Fe, Co; Me-bdc^2- = 5-methylisophthalate; dabco = 1,4-diazabicyclo[2.2.2]octane) for neutron diffraction studies. The five porous materials display BET surface areas from 1057-1937 m²/g and total methane uptake capacities of up to 143 cm³(STP)/cm³. Both the porous cages and cage-based frameworks display methane adsorption enthalpies of -15 to -22 kJ/mol. Also supported by molecular modeling, neutron diffraction studies indicate that the triangular windows of the cage are favorable methane adsorption sites with CD₄-arene interactions between 3.7 and 4.1 Å. At both low and high loadings, two additional methane adsorption sites on the exterior surface of the cage are apparent for a total of 56 adsorption sites per cage. These results show that M₂₄L₂₄ cages are competent gas storage materials and further adsorption sites may be optimized by judicious ligand functionalization to control extracage pore space.

Highly stable fullerene-based porous molecular crystals with open metal sites

The synthesis of conventional porous crystals involves building a framework using reversible chemical bond formation, which can result in hydrolytic instability. In contrast, porous molecular crystals assemble using only weak intermolecular interactions, which generally do not provide the same environmental stability. Here, we report that the simple co-crystallization of a phthalocyanine derivative and a fullerene (C₆₀ or C₇₀) forms porous molecular crystals with environmental stability towards high temperature and hot aqueous base or acid. Moreover, by using diamond anvil cells and synchrotron single-crystal measurements, stability towards extreme pressure (>4 GPa) is demonstrated, with the stabilizing fullerene held between two phthalocyanines and the hold tightening at high pressure. Access to open metal centres within the porous molecular co-crystal is demonstrated by in situ crystallographic analysis of the chemisorption of pyridine, oxygen and carbon monoxide. This suggests strategies for the formation of highly stable and potentially functional porous materials using only weak van der Waals intermolecular interactions.

Ultrathin Phthalocyanine-Conjugated Polymer Nanosheet-Based Electrochemical Platform for Accurately Detecting H2O2 in Real Time

As a vital biological mediator and a widely used industrial oxidant, the accurate detection of hydrogen peroxide (H₂O₂) is of significance for both academic purpose and practical applications. Herein, we report a novel approach for the development of a high-performance electrochemical H₂O₂ sensor constructed by iron phthalocyanine (FePc)-based diyne-linked conjugated polymeric nanosheets (NSs), FePc-CP NSs. The FePc-CP NSs were delaminated from the bulk material via a defect- and disorder-induced synthetic strategy. By the quasi-Langmuir-Shäfer method, the prepared FePc-CP NSs were self-assembled into multilayer films with controllable thickness on electrodes. Owing to the highly exposed active centers on the surfaces, the FePc-CP NS film-modified electrodes exhibited excellent H₂O₂ determination performance with a wide linear detection range (0.1-1000 μM), a short response time (the response current approached the maximum value within 0.1 s), a low limit of detection (0.017 μM), and excellent sensitivity (97 μA cm^-2 mM^-1), which are comparable to the best results reported so far for electrochemical H₂O₂ sensors. In addition, the fabricated electrochemical H₂O₂ sensor also displayed satisfactory stability, reproducibility, and selectivity. Furthermore, the obtained FePc-CP NS film sensor can be applied in real-time monitoring of H₂O₂ in commercial orange juice and beer as well as H₂O₂ secreted from A549 live cells, revealing its application potential toward the accurate detection of H₂O₂ in real-sample analysis.

Selective electroreduction of dinitrogen to ammonia on a molecular iron phthalocyanine/O-MWCNT catalyst under ambient conditions

Effective catalysts with sufficient activity and selectivity are essential for the nitrogen reduction reaction (NRR).

Construction of a supramolecule comprising [2,3,9,10,16,17,23,24-octakis(2,6-dimethylphenoxy)phthalocyaninato]zinc(II) and (5,10,15,20-tetraphenylporphyrinato)zinc(II)

The supramolecular features in the title compound, [2,3,9,10,16,17,23,24-octakis(2,6-dimethylphenoxy)phthalocyaninato]zinc(II) bis[(5,10,15,20-tetraphenylporphyrinato)zinc(II)] chloroform tetrasolvate, [Zn(C96H80N8O8)][Zn(C44H28N4)]2·4CHCl3 or [Zn(Pc)][Zn(TPP)]2·4CHCl3, result from a self-assembly of one molecule of [2,3,9,10,16,17,23,24-octakis(2,6-dimethylphenoxy)phthalocyaninato]zinc(II) (ZnPc) and two molecules of (5,10,15,20-tetraphenylporphyrinato)zinc(II) (ZnTPP). One half ZnPc, one ZnTPP and two chloroform molecules define the asymmetric unit, with the zinc(II) cation of ZnPc situated on an inversion centre. In the supramolecule, the central ZnPc moiety is sandwiched between two ZnTPPs moieties in a co-facial conformation with a π-conjugated system, leading to a nearly H-type aggregate with a distance of 3.4967 (5) Å between adjacent zinc sites. The ZnTPP units are slightly glided away to form a partial ecliptic arrangement. Each phenyl group of the TPP ligand is anchored above the N atom of the isoindole linker of the Pc ligand through weak C—H...N hydrogen bonds and is held into the crevice between the two dimethylphenoxy groups of phthalocyanine via van der Waals interactions. In the crystal, chloroform solvent molecules are situated between the supramolecules. There is another solvent-accessible void of 341 (2) Å3. The contribution of disordered solvent molecules situated in this void was removed from the diffraction data using SQUEEZE in PLATON [Spek (2015). Acta Cryst. C71, 9–18]. The given chemical formula and other crystal data do not consider this unknown solvent molecule(s).

Self-assembly of lattices with high structural complexity from a geometrically simple molecule

Here we report an anomalous porous molecular crystal built of C-H···N-bonded double-layered roof-floor components and wall components of a segregatively interdigitated architecture. This complicated porous structure consists of only one type of fully aromatic multijoint molecule carrying three identical dipyridylphenyl wedges. Despite its high symmetry, this molecule accomplishes difficult tasks by using two of its three wedges for roof-floor formation and using its other wedge for wall formation. Although a C-H···N bond is extremely labile, the porous crystal maintains its porosity until thermal breakdown of the C-H···N bonds at 202°C occurs, affording a nonporous polymorph. Though this nonporous crystal survives even at 325°C, it can retrieve the parent porosity under acetonitrile vapor. These findings show how one can translate simplicity into ultrahigh complexity.

Functional Enzyme Mimics for Oxidative Halogenation Reactions that Combat Biofilm Formation

Transition-metal oxide nanoparticles and molecular coordination compounds are highlighted as functional mimics of halogenating enzymes. These enzymes are involved in halometabolite biosynthesis. Their activity is based upon the formation of hypohalous acids from halides and hydrogen peroxide or oxygen, which form bioactive secondary metabolites of microbial origin with strong antibacterial and antifungal activities in follow-up reactions. Therefore, enzyme mimics and halogenating enzymes may be valuable tools to combat biofilm formation. Here, halogenating enzyme models are briefly described, enzyme mimics are classified according to their catalytic functions, and current knowledge about the settlement chemistry and adhesion of fouling organisms is summarized. Enzyme mimics with the highest potential are showcased. They may find application in antifouling coatings, indoor and outdoor paints, polymer membranes for water desalination, or in aquacultures, but also on surfaces for food packaging, door handles, hand rails, push buttons, keyboards, and other elements made of plastic where biofilms are present. The use of natural compounds, formed in situ with nontoxic and abundant metal oxide enzyme mimics, represents a novel and efficient "green" strategy to emulate and utilize a natural defense system for preventing bacterial colonization and biofilm growth.

Single crystal-to-single crystal transformations induced by ammonia–water equilibrium changes

Reversible single crystal-to-single crystal transformations were observed for the Ni(ii) complex with 5-methyl-5-phenylhydantoin.

A supramolecular porous material comprising Fe(ii) mesocates

The dinuclear mesocate [Fe₂L₃](BF₄)₄ is a supramolecular building block for a microporous material possessing 1D channels that are permanently accessible to incoming guest molecules showing a high selectivity for CO₂ over N₂.

Phthalocyanine as a redox-active platform for organometallic chemistry

The first structurally characterized phthalocyanine (Pc)-based PcM-aryl, PcM–alkynyl, and PcM–Wittig complexes (with any metal centre), and the first PcCr–alkyl complexes spanning three chromium and two Pc-ring oxidation states are presented, illustrating that this classical, redox-active macrocycle can support a wide range of metal–carbon chemistry.

Novel, linear oligoisoindole compounds with a conjugated electronic structure

Novel, linear, conjugated oligoisoindole compounds have been synthesized and characterized, adding new members to the oligoisoindole functional molecular family.

A hindered subphthalocyanine that forms crystals with included aromatic solvent but will not play ball with C60

A novel subphthalocyanine containing bulky substituents placed at its peripheral sites (i.e. 2,3,9,10,16,17-hexa(2′,6′-di-iso-propylphenoxy)boron subphthalocyanine) was prepared and assessed for supramolecular binding with C[Formula: see text], through crystallisation and fluorescence studies. Three different crystal polymorphs of the subphthalocyanine were obtained that showed inclusion of a single aromatic solvent molecule within the well-defined cavity of the molecule but complete exclusion of C[Formula: see text]. Analysis of the crystal structures indicated that the bowl-shaped cavity of the subphthalocyanine molecule was only accessible to small molecules due to the steric congestion surrounding the macrocycle, which results in hindered rotation of the substituents on the NMR timescale. Enhanced solubility, up to 42.0 g/L in common organic solvents, was demonstrated consistent with the crystal structures which are dominated by relatively weak intermolecular interactions, which allow solvent molecules to play a role in crystallisation.

Theoretical Investigations of CO2 and H2 Sorption in Robust Molecular Porous Materials

Molecular simulations of CO₂ and H₂ sorption were performed in MPM-1-Cl and MPM-1-TIFSIX, two robust molecular porous materials (MPMs) with the empirical formula [Cu₂(adenine)₄Cl₂]Cl₂ and [Cu₂(adenine)₄(TiF₆)₂], respectively. Recent experimental studies have shown that MPM-1-TIFSIX displayed higher CO₂ uptake and isosteric heat of adsorption (Q_st) than MPM-1-Cl [Nugent, P. S.; et al. J. Am. Chem. Soc. 2013, 135, 10950-10953]. This was verified through the simulations executed herein, as the presented simulated CO₂ sorption isotherms and Q_st values are in very good agreement with the corresponding experimental data for both MPMs. We also report experimental H₂ sorption data in both MPMs. Experimental studies revealed that MPM-1-TIFSIX exhibits high H₂ uptake at low loadings and an initial H₂ Q_st value of 9.1 kJ mol^-1. This H₂ Q_st value is greater than that for a number of existing metal-organic frameworks (MOFs) and represents the highest yet reported for a MPM. The remarkable H₂ sorption properties for MPM-1-TIFSIX have been confirmed through our simulations. The modeling studies revealed that only one principal sorption site is present for CO₂ and H₂ in MPM-1-Cl, which is sorption onto the Cl^- counterions within the large channels. In contrast, three different sorption sites were discovered for both CO₂ and H₂ in MPM-1-TIFSIX: (1) between two TIFSIX groups within a small passage connecting the large channels, (2) onto the TIFSIX ions lining the large channels, and (3) within the small channels. This study illustrates the detailed insights that molecular simulations can provide on the CO₂ and H₂ sorption mechanism in MPMs.

Protein-Metal Organic Framework Hybrid Composites with Intrinsic Peroxidase-like Activity as a Colorimetric Biosensing Platform

Artificial enzyme mimetics have received considerable attention because natural enzymes have some significant drawbacks, including enzyme autolysis, low catalytic activity, poor recovery, and low stability to environmental changes. Herein, we demonstrated a facile approach for one-pot synthesis of hemeprotein-metal organic framework hybrid composites (H-MOFs) by using bovine hemoglobin (BHb) and zeolitic imidazolate framework-8 (ZIF-8) as a model reaction system. Surprisingly, the new hybrid composites exhibit 423% increase in peroxidase-like catalytic activity compared to free BHb. Taking advantages of the unique pore structure of H-MOFs with high catalytic property, a H-MOFs-based colorimetric biosensing platform was newly constructed and applied for the fast and sensitive detection of hydrogen peroxide (H₂O₂) and phenol. The corresponding detection limits as low as 1.0 μM for each analyte with wide linear ranges (0-800 μM for H₂O₂ and 0-200 μM for phenol) were obtained by naked-eye visualization. Significantly, a sensitive and selective method for visual assay of trace H₂O₂ in cells and phenol in sewage was achieved with this platform. The stability of H-MOFs was also examined, and excellent reproducibility and recyclability without losing in their activity were observed. In addition, the general applicability of H-MOFs was also investigated by using other hemeproteins (horseradish peroxidase, and myoglobin), and the corresponding catalytic activities were 291% and 273% enhancement, respectively. This present work not only expands the application of MOFs but also provides an alternative technique for biological and environmental sample assay.