Gas-Phase Characterization of Adipic Acid, 6-Hydroxycaproic Acid, and Their Thermal Decomposition Products by Rotational Spectroscopy

We report the spectroscopic investigation of two bifunctional aliphatic carboxylic acids, namely, adipic acid and 6-hydroxycaproic acid, in the gas phase by combining high-resolution rotational spectroscopy and supersonic expansions. Their pure rotational spectra were successfully identified and characterized. However, due to the low thermal stability of these two chemicals, the measured rotational spectra were significantly congested with transitions corresponding to their decomposition products upon heating. We observed cyclopentanone and adipic anhydride in the spectrum of adipic acid and ε-caprolactone and its monohydrate in the spectrum of 6-hydroxycaproic acid. On the basis of the distinct fingerprints of both carboxylic acids and a series of their decomposition products, the spectra were analyzed in a time-segmented manner. This provides valuable insights into the thermal decomposition mechanisms of these two samples over time, which highlights the robustness of microwave spectroscopy as a potent tool for analyzing complex chemical mixtures in a species-, isomer-, and conformer-selective way.

Directional Electrosynthesis of Adipic Acid and Cyclohexanone by Controlling the Active Sites on NiOOH

Dicarboxylic acids and cyclic ketones, such as adipic acid (AA) and cyclohexanone (CHN), are essential compounds for the chemical industry. Although their production by electrosynthesis using electricity is considered one of the most promising strategies, the application of such processes has been hampered by a lack of efficient catalysts as well as a lack of understanding of the mechanism. Herein, a series of monolithic msig/ea-NiOOH-Ni(OH)2/NF were prepared by means of self-dissolution of metal matrix components, interface growth, and electrochemical activation (denoted as msig/ea). The as-synthesized catalysts have three-dimensional cuboid-like structures formed by interconnecting nanosheets composed of NiOOH. By theoretically guided regulation of the amounts of Ni3+ and oxygen vacancies (OV), a 96.5% yield of CHN from cyclohexanol (CHA) dehydrogenation and a 93.6% yield of AA from CHN oxidation were achieved. A combined experimental and theoretical study demonstrates that CHA dehydrogenation and CHN oxidation were promoted by the formation of Ni3+ and the peroxide species (*OOH) on OV. This work provides a promising approach for directional electrosynthesis of high-purity chemicals with in-depth mechanistic insights.

Generalized Rapid Synthesis of Supported Nanocluster Catalyst for Mild Hydrogenation of Phenol toward KA Oil

Homogeneous and nanometric metal clusters with unique electronic structures are promising for catalysis, however, common synthesis techniques for metal clusters suffer from large size and even metal nanocrystals attributing to their high surface energy and unsaturated configurations. Herein, a generalized rapid annealing strategy for synthesizing a series of supported metal clusters as superior catalysts is developed. Remarkably, TiO2 supported platinum nanoclusters (Pt NC/TiO2 ) exhibits the excellent catalytic activity to realize phenol hydrogenation under mild conditions. The complete phenol conversion rate and 100% selectivity toward KA oil are achieved in aqueous solution at room temperature and normal pressure. Semi-continuous scale up production of KA oil is successfully performed under mild conditions. Such excellent performance mainly originates from the partial reconstruction of Pt NC/TiO2 in aqueous phenol solution. Considering that the phenol can be produced from lignin, this study underpins a facile, sustainable, and economical route to synthesize nylon from biomass.

Selective Oxidation of Cyclohexanone to Adipic Acid Using Molecular Oxygen in the Presence of Alkyl Nitrites and Transition Metals as Catalysts

This paper presents a not previously reported catalytic system consisting of transition metals Co2+ and Mn2+ and alkyl nitrites R-ONO for the oxidation of cyclohexanone with oxygen to adipic acid. The influence of type and amount of catalyst, temperature, time, and type of raw material on conversion and product composition were determined. In addition, the oxidation of selected cyclic ketones such as cyclopentanone, cyclohexanone, cyclooctanone, cyclododecanone, 2-methylcyclohexanone, 3-methylcyclohexanone, and 4-methylcyclohexanone in acetic acid as solvent was performed. The results showed that R-ONO systems, under established reaction conditions, form NO·radicals, which oxidize to NO2 under a strong oxidization reaction environment. The Co2+/Mn2+/NO2 system was shown to be highly active in the oxidation of cyclic ketones with oxygen.

Synthesis and Crystal Structures of Mn(II) and Co(II) Complexes as Catalysts for Oxidation of Cyclohexanone

The global demand on adipic usage in the production of plasticizers and synthetic polyamide is increasing. In line with the search for an efficient and energy-conserving way to isolate adipic acid (AA) in good yields, this paper introduces the oxidization of cyclohexanone utilizing two new coordination compounds, [Mn(2,6-pydc)2](imi) (1) and [Co(H2pza)2(H2O)2(NO3)].NO3 (2), as catalysts. Compounds 1 and 2 were synthesized by room temperature and refluxing methods, and characterized by spectral analyses (IR and UV-Vis.), SEM, BET, TGA, elemental, and X-ray crystallography. The single crystal structure of compound 1 revealed that pyridinedicarboxylate (2,6-pydc) and imidazole (imi) moieties were coordinated to the Mn(II) atom through imine nitrogen and deprotonated oxygen atoms, to form an undistorted octahedral coordination geometry with the N2O4 donor set. The axial and equatorial planes containing O2, O4, O5, and O7 atoms were from two adjacent 2,6-pydc ligands which formed the unidendate donor ligand; imi, on the other hand, acted as a bidendate donor ligand. For compound 2, the Co(II) atom was being coordinated by two pyrazinamide (H2pza) moieties, which acted as an unidendate donor ligand; two water molecules occupying the axial position, and one nitrate molecule occupying the apical position, were within the coordination sphere; a nitrate molecule was disordered outside the coordination sphere. The distance, 4.658 Å, between the Co1 atom and the N8 atom of the uncoordinated nitrate molecule, was within the range reported elsewhere. Cyclohexanone peroxidation experiments revealed that compound 1 exhibited unique catalytic performance by giving a 72.8% yield in adipic acid, in comparison to the 71.3% yield obtained with compound 2. The yields in AA were maintained by way of recyclability evaluation. The reaction kinetics of compound 2 gave less activation energy, Ea 2938 J mol−1, while the thermodynamic parameters indicated that the chemical reactivity of cyclohexanone on the active surfaces of compounds 1 and 2 was via monolayer physisorption.

Cyclohexane oxidation using advanced oxidation processes with metals and metal oxides as catalysts: a review

Selective oxidation of cyclohexane has gained substantial interest in the field of research due to the prominence of its products in industrial processes. Particularly, advanced oxidation processes (AOPs) constitute a positive technology for the oxidation of cyclohexane owing to their high oxidation potentials and environmental benign properties. This review entails to address the progress made in advanced oxidation of cyclohexane over nanostructured metals and metal oxides catalysts. The main focus is directed toward the photocatalysis, Fenton oxidation and ozonation as advanced oxidation processes. Mainly, the fundamental principles, prime factors of the AOPs in conjunction with metal and metal oxide catalysts and the mechanistic insight toward the oxidation of cyclohexane are highlighted. The affirmative effects of the metals and metal oxide catalysts mainly focusing on particle size, structure and elemental composition is stressed. Lastly, the advantages and disadvantages of the AOPs and the strategic approaches to counter the disadvantages are also clearly elucidated.

Efficient Oxidation of Cyclohexane over Bulk Nickel Oxide under Mild Conditions

Nickel oxide powder was prepared by simple calcination of nickel nitrate hexahydrate at 500 °C for 5 h and used as a catalyst for the oxidation of cyclohexane to produce the cyclohexanone and cyclohexanol—KA oil. Molecular oxygen (O₂), hydrogen peroxide (H₂O₂), t-butyl hydrogen peroxide (TBHP) and meta-chloroperoxybenzoic acid (m-CPBA) were evaluated as oxidizing agents under different conditions. m-CPBA exhibited higher catalytic activity compared to other oxidants. Using 1.5 equivalent of m-CPBA as an oxygen donor agent for 24 h at 70 °C, in acetonitrile as a solvent, NiO powder showed exceptional catalytic activity for the oxidation of cyclohexane to produce KA oil. Compared to different catalytic systems reported in the literature, for the first time, about 85% of cyclohexane was converted to products, with 99% KA oil selectivity, including around 87% and 13% selectivity toward cyclohexanone and cyclohexanol, respectively. The reusability of NiO catalyst was also investigated. During four successive cycles, the conversion of cyclohexane and the selectivity toward cyclohexanone were decreased progressively to 63% and 60%, respectively, while the selectivity toward cyclohexanol was increased gradually to 40%.

Surfactant-Assisted Ozonolysis of Alkenes in Water: Mitigation of Frothing Using Coolade as a Low-Foaming Surfactant

Aqueous-phase ozonolysis in the atmosphere is an important process during cloud and fog formation. Water in the atmosphere acts as both a reaction medium and a reductant during the ozonolysis. Inspired by the atmospheric aqueous-phase ozonolysis, we herein report the ozonolysis of alkenes in water assisted by surfactants. Several types of surfactants, including anionic, cationic, and nonionic surfactants, were investigated. Although most surfactants enhanced the solubility of alkenes in water, they also generated excessive foaming during the ozone bubbling, which led to the loss of products. Mitigation of the frothing was accomplished by using Coolade as a nonionic and low-foaming surfactant. Coolade-assisted ozonolysis of alkenes in water provided the desired carbonyl products in good yields and comparable to those achieved in organic solvents. During the ozonolysis reaction, water molecules trapped within the polyethylene glycol region of Coolade were proposed to intercept the Criegee intermediate to provide a hydroxy hydroperoxide intermediate. Decomposition of the hydroxy hydroperoxide led to formation of the carbonyl product without the need for a reductant typically required for the conventional ozonolysis using organic solvents. This study presents Coolade as an effective surfactant to improve the solubility of alkenes while mitigating frothing during the ozonolysis in water.

Sustainable Routes for the Synthesis of Renewable Adipic Acid from Biomass Derivatives

Adipic acid (AA) is a key industrial dicarboxylic acid intermediate used in nylon manufacturing. Unfortunately, the traditional process technology is accompanied by serious environmental pollution. Given the growing demand for adipic acid and the desire to reduce its negative impact on the environment, considerable efforts have been devoted to developing more green and friendly routes. This Review is focused on the latest advances in the sustainable preparation of AA from biomass-based platform molecules, including 5-hydroxymethylfufural, glucose, γ-valerolactone, and phenolic compounds, through biocatalysis, chemocatalysis, and the combination of both. Additionally, the development of state-of-the-art catalysts for different catalytic systems systematically is discussed and summarized, as well as their reaction mechanisms. Finally, the prospects for all preparation routes are critically evaluated and key technical challenges in the development of green and sustainable processes for the manufacture of AA are highlighted. It is hoped that the green adipic acid synthesis pathways presented can provide insights and guidance for further research into other industrial processes for the production of nylon precursors in the future.

Efficient Catalysts for the Green Synthesis of Adipic Acid from Biomass

Green synthesis of adipic acid from renewable biomass is a very attractive goal of sustainable chemistry. Herein, we report efficient catalysts for a two-step transformation of cellulose-derived glucose into adipic acid via glucaric acid. Carbon nanotube-supported platinum nanoparticles are found to work efficiently for the oxidation of glucose to glucaric acid. An activated carbon-supported bifunctional catalyst composed of rhenium oxide and palladium is discovered to be powerful for the removal of four hydroxyl groups in glucaric acid, affording adipic acid with a 99 % yield. Rhenium oxide functions for the deoxygenation but is less efficient for four hydroxyl group removal. The co-presence of palladium not only catalyzes the hydrogenation of olefin intermediates but also synergistically facilitates the deoxygenation. This work presents a green route for adipic acid synthesis and offers a bifunctional-catalysis strategy for efficient deoxygenation.

State-of-the-art palladium-catalyzed alkoxycarbonylations

State-of-the-art Pd-catalyzed alkoxycarbonylation: catalyst development and applications.

Synthesis of Dicarboxylic Acids from Aqueous Solutions of Diols with Hydrogen Evolution Catalyzed by an Iridium Complex

A catalytic system for the synthesis of dicarboxylic acids from aqueous solutions of diols accompanied by the evolution of hydrogen was developed. An iridium complex bearing a functional bipyridonate ligand with N,N-dimethylamino substituents exhibited a high catalytic performance for this type of dehydrogenative reaction. For example, adipic acid was synthesized from an aqueous solution of 1,6-hexanediol in 97 % yield accompanied by the evolution of four equivalents of hydrogen by the present catalytic system. It should be noted that the simultaneous production of industrially important dicarboxylic acids and hydrogen, which is useful as an energy carrier, was achieved. In addition, the selective dehydrogenative oxidation of vicinal diols to give α-hydroxycarboxylic acids was also accomplished.

Chemical Synthesis of Single Atomic Site Catalysts

Manipulating metal atoms in a controllable way for the synthesis of materials with the desired structure and properties is the holy grail of chemical synthesis. The recent emergence of single atomic site catalysts (SASC) demonstrates that we are moving toward this goal. Owing to the maximum efficiency of atom-utilization and unique structures and properties, SASC have attracted extensive research attention and interest. The prerequisite for the scientific research and practical applications of SASC is to fabricate highly reactive and stable metal single atoms on appropriate supports. In this review, various synthetic strategies for the synthesis of SASC are summarized with concrete examples highlighting the key issues of the synthesis methods to stabilize single metal atoms on supports and to suppress their migration and agglomeration. Next, we discuss how synthesis conditions affect the structure and catalytic properties of SASC before ending this review by highlighting the prospects and challenges for the synthesis as well as further scientific researches and practical applications of SASC.

Experimental and computational investigations of C–H activation of cyclohexane by ozone in liquid CO2

Cyclohexane ozonation in liquid CO₂ produces cyclohexanone, a precursor to adipic acid, cleanly at high yields compared to conventional process.

Direct synthesis of adipic acid esters via palladium-catalyzed carbonylation of 1,3-dienes

The direct carbonylation of 1,3-butadiene offers the potential for a more cost-efficient and environmentally benign route to industrially important adipic acid derivatives. However, owing to the complex reaction network of regioisomeric carbonylation and isomerization pathways, a selective practical catalyst for this process has thus far proven elusive. Here, we report the design of a pyridyl-substituted bidentate phosphine ligand (HeMaRaphos) that, upon coordination to palladium, catalyzes adipate diester formation from 1,3-butadiene, carbon monoxide, and butanol with 97% selectivity and 100% atom-economy under industrially viable and scalable conditions (turnover number > 60,000). This catalyst system also affords access to a variety of other di- and triesters from 1,2- and 1,3-dienes.

Tuning the Potential Energy Landscape to Suppress Ostwald Ripening in Surface-Supported Catalyst Systems

Rational control of nanoparticle (NP) size distribution during operation is crucial to improve catalytic performance and noble metal sustainability. Herein, we explore the Ostwald ripening (OR) of metal atoms on zeolite surfaces by a coupled theoretical-experimental approach. Zeolites with the same structure (ZSM-5) but different concentrations of aluminum doped into the matrix were observed to yield systematic differences in supported nanoparticle size distributions. Our first-principles simulations suggest that NP stability at high temperature is governed by both geometric constraints and the roughness of the energetic landscape. Calculated adatom migration paths across the zeolite surface and desorption paths from the supported NPs lend insight into the modified OR sintering processes with the emergence of different binding configurations as the aluminum concentration increases from pristine to heavily doped ZSM-5. These findings reveal the potential for the rational design of support structures to suppress OR sintering.

Heterogeneous Gold Catalysis: From Discovery to Applications

In the present review, the important and current developments of gold catalysts for a wide range of applications are comprehensively summarized. This review also provides a detailed study of the literature data concerning the preparation, characterization, and catalytic applications of gold catalysts. Additionally, the main aspects of using supported gold nanoparticles (AuNPs) as catalysts for oxidation reactions are considered. In particular, the oxidation of benzyl alcohol to benzaldehyde and the production of adipic acid from cyclohexane are discussed in detail. Lastly, the key properties of gold catalysts are described, and an outlook on the application of gold catalysts is presented.

One-pot selective synthesis of azoxy compounds and imines via the photoredox reaction of nitroaromatic compounds and amines in water

A facile one-pot two-stage photochemical synthesis of aromatic azoxy compounds and imines has been developed by coupling the selective reduction of nitroaromatic compounds with the selective oxidation of amines in an aqueous solution. In the first stage (light illumination, Ar atmosphere), the light excited nitroaromatic molecule abstract H from amine to form ArNO₂H and amine radical, which then form nitrosoaromatic, hydroxylamine and imine compounds. Water acts as a green solvent for the dispersion of the reactants and facilitates the formation of nitrosoaromatic and hydroxylamine intermediate compounds. In the second stage (no light, air atmosphere), the condensation of nitrosoaromatic and hydroxylamine compounds yields aromatic azoxy product with the aid of molecular oxygen in air. This photochemical synthesis achieved both high conversion and high product selectivity (>99%) at room temperature.

Catalytic transformation of 2,5-furandicarboxylic acid to adipic acid over niobic acid-supported Pt nanoparticles

Biomass-derived 2,5-furandicarboxylic acid was successfully converted to adipic acid over a niobic acid-supported Pt catalyst in water under H₂.

Catalytic Transformation of Cellulose and Its Derivatives into Functionalized Organic Acids

Cellulose is a promising renewable and abundant resource for the production of high-value chemicals, in particular, organic oxygenates, because of its high oxygen/carbon ratio. The sustainable production of hydroxycarboxylic acids and dicarboxylic acids, such as gluconic/glucaric acid, lactic acid, 2,5-furandicarboxylic acid, adipic acid, and terephthalic acid, most of which are monomers of key polymers, have attracted much attention in recent years. The synthesis of these organic acids from cellulose generally involves several tandem reaction steps, and thus, multifunctional catalysts that can catalyze the selective activation of specific C-O or C-C bonds hold the key. This review highlights recent advances in the development of efficient catalytic systems and new strategies for the selective conversion of cellulose or its derived carbohydrates into functionalized organic acids. The reaction mechanism is discussed to offer deep insights into the regioselective cleavage of C-O or C-C bonds.

Directing activator-assisted regio- and oxidation state-selective aerobic oxidation of secondary C(sp(3))-H bonds in aliphatic alcohols

The regioselective conversion of an unactivated C(sp(3))-H bond of a methylene carbon (CH2) into a C-O single bond is an attractive reaction in organic synthesis. Herein, we present a strategy for a regio- and oxidation state-selective aerobic C-H oxidation based on an N-hydroxyamide-derived directing activator (DA), which is attached to a hydroxy group in alcohol substrates. The DA reacts with NOx species generated in situ from NaNO2, a Brønsted acid, and aerobic oxygen, and effectively generates an amidoxyl radical from the N-hydroxy moiety of the DA. Then, the amidoxyl radical promotes site-selective intramolecular C-H abstraction from methylenes with γ- (or δ-) selectivity. The thus-generated methylene radicals are trapped by molecular oxygen and NO. This process results in the predominant formation of nitrate esters as products, which suppresses undesired overoxidation. The products can be easily converted into alcohols after hydrogenolysis.

Selective transition-metal-free vicinal cis-dihydroxylation of saturated hydrocarbons

A transition-metal-free cis-dihydroxylation of saturated hydrocarbons under ambient reaction conditions has been developed. The described approach allows a direct and selective synthesis of vicinal diols. The new reaction thereby proceeds via radical iodination and a sequence of oxidation steps. A broad scope of one-pot dual C(sp³)-H bond functionalization for the selective synthesis of vicinal syn-diols was demonstrated.