Reversible molecular adsorption based on multiple-point interaction by shrinkable gels

Engineering Temperature-Responsive Polymer Nanoparticles that Load and Release Paclitaxel, a Low-Molecular-Weight Anticancer Drug

Poly(N-isopropylacrylamide) (pNIPAm) undergoes a hydrophilicity/hydrophobicity change around its lower critical solution temperature (LCST). Therefore, pNIPAm-based polymer nanoparticles (NPs) shrink above their LCST and swell below their LCST. Although temperature responsiveness is an important characteristic of synthetic polymers in drug and gene delivery, few studies have investigated the temperature-responsive catch and release of low-molecular-weight drugs (LMWDs) as their affinity to the target changes. Since LMWDs have only a few functional groups, preparation of NPs with high affinity for LMWDs is hard compared with that for peptides and proteins. However, LMWDs such as anticancer drugs often have a stronger effect than peptides and proteins. Therefore, the development of NPs that can load and release LMWDs is needed for drug delivery. Here, we engineered pNIPAm-based NPs that capture paclitaxel (PTX), an anticancer LMWD that inhibits microtubules, above their LCST and release it below their LCST. The swelling transition of the NPs depended on their hydrophobic monomer structure. NPs with swelling ratios (=NP size at 25 °C/NP size at 37 °C) exceeding 1.90 released captured PTX when cooled to below their LCST by changing the affinity for PTX. On the other hand, NPs with a swelling ratio of only 1.14 released melittin. Therefore, optimizing the functional monomers of temperature-responsive NPs is essential for the catch and release of the target in a temperature-dependent manner. These results can guide the design of stimuli-responsive polymers that catch and release their target molecules.

Imprinted Hydrogel Nanoparticles for Protein Biosensing: A Review

Over the past decade, molecular imprinting (MI) technology has made tremendous progress, and the advancements in nanotechnology have been the major driving force behind the improvement of MI technology. The preparation of nanoscale imprinted materials, i.e., molecularly imprinted polymer nanoparticles (MIP NPs, also commonly called nanoMIPs), opened new horizons in terms of practical applications, including in the field of sensors. Currently, hydrogels are very promising for applications in bioanalytical assays and sensors due to their high biocompatibility and possibility to tune chemical composition, size (microgels, nanogels, etc.), and format (nanostructures, MIP film, fibers, etc.) to prepare optimized analyte-responsive imprinted materials. This review aims to highlight the recent progress on the use of hydrogel MIP NPs for biosensing purposes over the past decade, mainly focusing on their incorporation on sensing devices for detection of a fundamental class of biomolecules, the peptides and proteins. The review begins by directing its focus on the ability of MIPs to replace biological antibodies in (bio)analytical assays and highlight their great potential to face the current demands of chemical sensing in several fields, such as disease diagnosis, food safety, environmental monitoring, among others. After that, we address the general advantages of nanosized MIPs over macro/micro-MIP materials, such as higher affinity toward target analytes and improved binding kinetics. Then, we provide a general overview on hydrogel properties and their great advantages for applications in the field of Sensors, followed by a brief description on current popular routes for synthesis of imprinted hydrogel nanospheres targeting large biomolecules, namely precipitation polymerization and solid-phase synthesis, along with fruitful combination with epitope imprinting as reliable approaches for developing optimized protein-imprinted materials. In the second part of the review, we have provided the state of the art on the application of MIP nanogels for screening macromolecules with sensors having different transduction modes (optical, electrochemical, thermal, etc.) and design formats for single use, reusable, continuous monitoring, and even multiple analyte detection in specialized laboratories or in situ using mobile technology. Finally, we explore aspects about the development of this technology and its applications and discuss areas of future growth.

Cooling-induced, localized release of cytotoxic peptides from engineered polymer nanoparticles in living mice for cancer therapy

Temperature-responsive polymers are often characterized by an abrupt change in the degree of swelling brought about by small changes in temperature. Polymers with a lower critical solution temperature (LCST) in particular, are important as drug and gene delivery vehicles. Drug molecules are taken up by the polymer in their solvent swollen state below their LCST. Increasing the temperature above the LCST, typically physiological temperatures, results in desolvation of polymer chains and microstructure collapse. The trapped drug is released slowly by passive diffusion through the collapsed polymer network. Since diffusion is dependent on many variables, localizing and control of the drug delivery rate can be challenging. Here, we report a fundamentally different approach for the rapid (seconds) tumor-specific delivery of a biomacromolecular drug. A copolymer nanoparticle (NP) was engineered with affinity for melittin, a peptide with potent anti-cancer activity, at physiological temperature. Intravenous injection of the NP-melittin complex results in its accumulation in organs and at the tumor. We demonstrate that by local cooling of the tumor the melittin is rapidly released from the NP-melittin complex. The release occurs only at the cooled tumor site. Importantly, tumor growth was significantly suppressed using this technique demonstrating therapeutically useful quantities of the drug can be delivered. This work reports the first example of an in vivo site-specific release of a macromolecular drug by local cooling for cancer therapy. In view of the increasing number of cryotherapeutic devices for in vivo applications, this work has the potential to stimulate cryotherapy for in vivo drug delivery.

Association of two polyelectrolytes in salt solutions

The association of polyelectrolytes (PEs) in solution affects a wealth of structural and dynamic behaviors, and is also fundamentally important for an understanding of protein association and aggregation. Here, we theoretically study the association of two PE chains by addressing the stability and morphology of the non-spherical associates. Our theory predicts that an elongated pearl-necklace (PN) associate can be stable at high salt concentrations due to the screened electrostatic repulsion. This contradicts the implication of scaling theory. In addition, there is no one-to-one correspondence between the morphology of the associate and its constituting unimers, which is demonstrated by the existence of different association modes.

Phase Transition of Gels—A Review of Toyoich Tanaka’s Research

In 70’s, the extensive studies about the gel science has begun with the discovery of the volume phase transition of gel at the physics department of Massachusetts Institute of Technology. After the discovery of the volume phase transition of gel, the phenomenon was extensively studied and advanced by the discoverer, the late Professor Toyoichi Tanaka, who deceased on 20 May 2000 in the halfway of his research. In this paper, we would like to review his research to clarify his deep insight into the science of gels.

Multi-level encryption of information in morphing hydrogels with patterned fluorescence

Fluorescent hydrogels have attracted tremendous attention recently in the field of information security due to the booming development of information technology. Along this line, it is highly desired to improve the security level of concealed information by the advancements of materials and encryption technologies. Here we report multi-level encryption of information in a bilayer hydrogel with shape-morphing ability and patterned fluorescence. This hydrogel is composed of a fluorescence layer containing chromophore units in the poly(acrylic acid) network and an active layer with UV-absorption agents in the poly(N-isopropylacrylamide-co-acrylic acid) network. The former layer exhibits tunable fluorescence tailored by UV light irradiation to induce unimer-to-dimer transformation of the chromophores, facilitating the write-in of information through photolithography. The latter layer is responsive to temperature, enabling morphing of the bilayer hydrogel. Therefore, the bilayer hydrogel encoded with patterned fluorescent patterns can deform into three-dimensional configurations at room temperature to conceal the information, which is readable only after successive procedures of shape recovery at an appropriate temperature and under UV light irradiation from the right direction. The combination of morphing materials and patterned fluorescence as a new avenue to improve the encryption level of information should merit the design of other smart materials with integrated functions for specific applications.

Metal-Free Polymer-Based Affinity Medium for Selective Purification of His6-Tagged Proteins

We report a metal free synthetic hydrogel copolymer with affinity and selectivity for His6-tagged peptides and proteins. Small libraries of copolymers incorporating charged and hydrophobic functional groups were screened by an iterative process for His6 peptide affinity. The monomer selection was guided by interactions found in the crystal structure of an anti-His tag antibody-His6 peptide antigen complex. Synthetic copolymers incorporating a phenylalanine-derived monomer were found to exhibit strong affinity for both His6-containing peptides and proteins. The proximity of both aromatic and negatively charged functional groups were important factors for the His6 affinity of hydrogel copolymers. His6 affinity was not compromised by the presence of enzyme cleavage sequences. The His6-copolymer interactions are pH sensitive: the copolymer selectively captured His6 peptides at pH 7.8 while the interactions were substantially weakened at pH 8.6. This provided mild conditions for releasing His6-tagged proteins from the copolymer. Finally, a synthetic copolymer coated chromatographic medium was prepared and applied to the purification of a His6-tagged protein from an E. coli expression system. The results establish that a synthetic copolymer-based affinity medium can function as an effective alternative to immobilized metal ion columns for the purification of His6-tagged proteins.

Thermocells Driven by Phase Transition of Hydrogel Nanoparticles

Thermoelectric conversion of low temperature, delocalized, and abundant thermal sources is crucial for the development of the Internet of Things (IoT) and/or a carbon-free society. Thermocells are of great interest in thermoelectric conversion of low-temperature heat due to the low cost and flexibility of components. However, significant improvement of the conversion efficiency is required for the practical use of the cells. Here, we report thermo-electrochemical cells driven by volume phase transition (VPT) of hydrogel nanoparticles (NPs). Entropically driven VPT of poly(N-isopropylacrylamide) NPs containing carboxylic acids and amines generates a pH gradient of up to 0.049 and -0.053 pH K^-1, respectively, around physiological temperature. The pH gradient triggers the proton-coupled electron transfer (PCET) reactions of quinhydrone on the electrodes, resulting in the highly efficient thermoelectric conversion with a Seebeck coefficient (S_e) of -6.7 and +6.1 mV K^-1. Thermocells driven by phase transition of hydrogels provide a nontoxic, flexible, and inexpensive charger that harvests carbon-free energy from abundant energy sources such as solar, body and waste heat.

Dual Responsive Regulation of Host-Guest Complexation in Aqueous Media to Control Partial Release of the Host

The regulation of the concentration of a wide range of small molecules is ubiquitous in biological systems because it enables them to adapt to the continuous changes in the environmental conditions. Herein, we report an aqueous synthetic system that provides an orchestrated, temperature and pH controlled regulation of the complexation between the cyclobis(paraquat-p-phenylene) host (BBox) and a 1,5-dialkyloxynaphthalene (DNP) guest attached to a well-defined dual responsive copolymer composed of N-isopropylacrylamide as thermoresponsive monomer and acrylic acid as pH-responsive monomer. Controlled, partial release of the BBox, enabling control over its concentration, is based on the tunable partial collapse of the copolymer. This colored supramolecular assembly is one of the first synthetic systems providing control over the concentration of a small molecule, providing great potential as both T and pH chromic materials and as a basis to develop more complex systems with molecular communication.

Polymeric Design for Electron Transfer in Photoinduced Hydrogen Generation through a Coil-Globule Transition

To realize a renewable energy society, a polymeric system for photoinduced hydrogen generation utilizing a copolymer containing an electron acceptor was designed. In this system, the redox changes of viologen introduced into poly(N-isopropylacrylamide) cause cyclic conformational changes owing to the shifting of the phase transition temperature (PTT). The polymeric coil-globule transitions with hydrophilic/hydrophobic changes accelerate the electron transfer for hydrogen generation. In particular, hydrogen generation using visible-light energy with high efficiency is achieved around the PTT. In contrast to conventional solution systems, our polymeric system enables efficient hydrogen generation in a close molecular arrangement without the aggregation of catalytic nanoparticles. The utilization of conformational changes will provide a new strategy for synthesizing artificial photosynthetic hydrogels that split water to generate both hydrogen and oxygen.

Conformation-Dependent Affinity of Thermoresponsive Biodegradable Hydrogels for Multifunctional Ligands: A Differential Scanning Calorimetry Approach

We investigated energetics of binding of multifunctional pyranine ligands to hydrogels of the cross-linked poly(methoxyethylaminophosphazene) (PMOEAP) from data on the thermotropic volume phase transition of the gels by means of high-sensitivity differential scanning calorimetry. Dependences of the transition temperature, enthalpy, and width on the concentration of pyranines were obtained, and the excess transition free energy as a function of the pyranine concentration was calculated. We found that the affinity of the gels for the pyranine ligands increased very significantly upon the gel collapse. The intrinsic binding constants and free energies of binding of the ligands to the gels in the collapsed state were estimated from the DSC data. They revealed a significant increase in the hydrogel affinity for pyranines proportional to the number of anionic groups in the ligand structure. The affinity of the PMOEAP hydrogels for the multifunctional ligands was not affected by an increase in the cross-linking density of the gels and only slightly reduced by physiological salt concentrations.

Reversible p Ka Modulation of Carboxylic Acids in Temperature-Responsive Nanoparticles through Imprinted Electrostatic Interactions

The acid dissociation constants (p K_a values) of Brønsted acids at the active sites of proteins are reversibly modulated by intramolecular electrostatic interactions with neighboring ions in a reaction cycle. The resulting p K_a shift is crucial for the proteins to capture, transfer, and release target ions. On the other hand, reversible p K_a modulation through electrostatic interactions in synthetic polymer materials has seldom been realized because the interactions are strongly shielded by solvation water molecules in aqueous media. Here, we prepared hydrogel nanoparticles (NPs) bearing carboxylic acid groups whose p K_a values can be reversibly modulated by electrostatic interactions with counterions in the particles. We found that the deprotonated states of the acids were stabilized by electrostatic interactions with countercations only when the acids and cations were both imprinted in hydrophobic microdomains in the NPs during polymerization. Cationic monomers, like primary amine- and guanidium group-containing monomers, which interacted strongly with growing NPs showed greater p K_a modulation than monomers that did not interact with the NPs, such as quaternary ammonium group-containing monomers. Modulation was enhanced when the guanidium moieties were protected with hydrophobic groups during polymerization, so that the guanidium ions were imprinted in the hydrophobic microdomains; the lowest p K_a of ∼4.0 was achieved as a result. The p K_a modulation of the acids could be reversibly removed by inducing a temperature-dependent volume phase transition of the gel NPs. These design principles are applicable to other stimuli-responsive materials and integral to the development of synthetic materials that can be used to capture, transport, and separate target ions.

Gels with sense: supramolecular materials that respond to heat, light and sound

Advances in the field of supramolecular chemistry have made it possible, in many situations, to reliably engineer soft materials to address a specific technological problem. Particularly exciting are "smart" gels that undergo reversible physical changes on exposure to remote, non-invasive environmental stimuli. This review explores the development of gels which are transformed by heat, light and ultrasound, as well as other mechanical inputs, applied voltages and magnetic fields. Focusing on small-molecule gelators, but with reference to organic polymers and metal-organic systems, we examine how the structures of gelator assemblies influence the physical and chemical mechanisms leading to thermo-, photo- and mechano-switchable behaviour. In addition, we evaluate how the unique and versatile properties of smart materials may be exploited in a wide range of applications, including catalysis, crystal growth, ion sensing, drug delivery, data storage and biomaterial replacement.

Role of Mechanical Factors in Applications of Stimuli-Responsive Polymer Gels - Status and Prospects

Due to their unique characteristics such as multifold change of volume in response to minute change in the environment, resemblance of soft biological tissues, ability to operate in wet environments, and chemical tailorability, stimuli responsive gels represent a versatile and very promising class of materials for sensors, muscle-type actuators, biomedical applications, and autonomous intelligent structures. Success of these materials in practical applications largely depends on their ability to fulfill application-specific mechanical requirements. This article provides an overview of recent application-driven development of covalent polymer gels with special emphasis on the relevant mechanical factors and properties. A short account of mechanisms of gel swelling and mechanical characteristics of importance to stimuli-responsive gels is presented. The review highlights major barriers for wider application of these materials and discusses latest advances and potential future directions toward overcoming these barriers, including interpenetrating networks, homogeneous networks, nanocomposites, and nanofilamentary gels.

A Percolation Approach for Investigating the Sol-Gel Phase Transition of κ-Carrageenan: A Steady-State Fluorescence Study

A steady-state fluorescence technique was employed to study sol-gel transitions in K-carrageenan systems at various carrageenan concentrations. Scattered light, Isc, and fluorescence intensity, I, were monitored against temperature to determine critical phase transition temperatures and exponents. Pyranine was used as a fluorescence probe to monitor these phase transitions. It was observed that coil-to-helix (sol-gel) transition temperatures, Tch, strongly correlated with carrageenan concentration. The weight average degree of polymerization, DPw and gel fraction G, exponents (γ and β) were measured and found to be in accord with the classical Flory-Stockmayer model.

pH/temperature-sensitive hydrogel-based molecularly imprinted polymers (hydroMIPs) for drug delivery by frontal polymerization

Frontal polymerization was successfully utilized, for the first time, to obtain pH/temperature-sensitive hydrogel-based molecularly imprinted polymers (hydroMIPs).

Hydrophilic Hollow Molecularly Imprinted Polymer Microparticles with Photo- and Thermoresponsive Template Binding and Release Properties in Aqueous Media

A facile, general, and efficient approach to prepare hydrophilic hollow molecularly imprinted polymer (MIP) microparticles with photo- and thermoresponsive template binding and release behaviors in aqueous media is described, which includes the preparation of uniform "living" silica submicrospheres bearing surface atom transfer radical polymerization (ATRP)-initiating groups (i.e., alkyl halide groups) via a one-pot sol-gel method, their subsequent grafting of azobenzene (azo)-containing MIP shell and poly(N-isopropylacrylamide)-block-poly(2-hydroxyethyl methacrylate) (PNIPAAm-b-PHEMA) brushes via successive surface-initiated ATRP, and final removal of the silica core. The successful synthesis of such hydrophilic hollow MIP microparticles was confirmed with SEM, FT-IR, water dispersion stability, and static contact angle studies. They proved to show apparently higher template binding capacities than the corresponding solid ones and obvious photo- and thermoresponsive template binding properties in aqueous solutions. Moreover, their pronounced light- and temperature-controlled template release in aqueous media was also demonstrated. In particular, the introduction of PNIPAAm-b-PHEMA brushes onto hollow MIP microparticles imparted them with high surface hydrophilicity both below and above the lower critical solution temperature of PNIPAAm, which paves the way for their applications in such areas as controlled drug/chemical delivery and smart bioanalysis.

Design rationale of thermally responsive microgel particle films that reversibly absorb large amounts of CO2: fine tuning the pKa of ammonium ions in the particles

Fine-tuning of pK_a value of ammonium ions at both CO₂ capture and release temperature is found to be crucial for the design of the thermally responsive gel particle films that reversibly capture large amounts of CO₂.

Herein we revealed the design rationale of thermally responsive gel particle (GP) films that reversibly capture and release large amounts of CO₂ over a narrow temperature range (30–75 °C). The pK_a value of ammonium ions in the GPs at both the CO₂ capture temperature (30 °C) and release temperature (75 °C) is found to be the primary factor responsible for the stoichiometry of reversible CO₂ capture by the amines in the GP films. The pK_a values can be tuned by the properties of GPs such as volume phase transition temperature (VPTT), size, swelling ratio, and the imprinted microenvironment surrounding the amines. The optimal GP obtained according to the design rationale showed high capture capacity (68 mL CO₂ per g dry GPs, 3.0 mmol CO₂ per g dry GPs), although the regeneration temperature was as low as 75 °C. We anticipate that GP films that reversibly capture other acidic and basic gases in large amounts can also be achieved by the pK_a tuning procedures.

Extremely stretchable thermosensitive hydrogels by introducing slide-ring polyrotaxane cross-linkers and ionic groups into the polymer network

Stimuli-sensitive hydrogels changing their volumes and shapes in response to various stimulations have potential applications in multiple fields. However, these hydrogels have not yet been commercialized due to some problems that need to be overcome. One of the most significant problems is that conventional stimuli-sensitive hydrogels are usually brittle. Here we prepare extremely stretchable thermosensitive hydrogels with good toughness by using polyrotaxane derivatives composed of α-cyclodextrin and polyethylene glycol as cross-linkers and introducing ionic groups into the polymer network. The ionic groups help the polyrotaxane cross-linkers to become well extended in the polymer network. The resulting hydrogels are surprisingly stretchable and tough because the cross-linked α-cyclodextrin molecules can move along the polyethylene glycol chains. In addition, the polyrotaxane cross-linkers can be used with a variety of vinyl monomers; the mechanical properties of the wide variety of polymer gels can be improved by using these cross-linkers.

Bio-inspired detoxification using 3D-printed hydrogel nanocomposites

Rationally designed nanoparticles that can bind toxins show great promise for detoxification. However, the conventional intravenous administration of nanoparticles for detoxification often leads to nanoparticle accumulation in the liver, posing a risk of secondary poisoning especially in liver-failure patients. Here we present a liver-inspired three-dimensional (3D) detoxification device. This device is created by 3D printing of designer hydrogels with functional polydiacetylene nanoparticles installed in the hydrogel matrix. The nanoparticles can attract, capture and sense toxins, while the 3D matrix with a modified liver lobule microstructure allows toxins to be trapped efficiently. Our results show that the toxin solution completely loses its virulence after treatment using this biomimetic detoxification device. This work provides a proof-of-concept of detoxification by a 3D-printed biomimetic nanocomposite construct in hydrogel, and could lead to the development of alternative detoxification platforms.

Nanoparticles capable of selectively binding target chemicals have potential for detoxification processes, but can lead to accumulation in the liver. Here the authors show a 3D-printed device containing functional nanoparticles, allowing the detox potential to be realised while holding the particles in place.

Binding affinity of thermoresponsive polyelectrolyte hydrogels for charged amphiphilic ligands. A DSC approach

Controlled drug binding and release stand among top requirements postulated for targeted drug delivery systems of the new generations. "Smart" polymers and gels are highly suitable for the controlled delivery due to their structural sensitivity to minor environmental variations. The aim of this work was to study thermoresponsive polyanionic and polycationic hydrogels of N-isopropylacrylamide copolymers with acrylic acid and N-aminopropylmethacrylamide in terms of their interaction with two widely used drugs, propranolol and ibuprofen. Binding energetics of these drugs by the gels in swollen and collapsed state was estimated by means of high-sensitivity differential scanning calorimetry. Thermodynamic parameters of the gel collapse (transition temperature, enthalpy, heat capacity increment, and width) were determined as a dependence of the drug concentrations. From these data the excess free energy of collapse was calculated as a function of drug concentration. Deconvolution of this function resulted in the evaluation of binding parameters and contributions from interactions of various types to the free energy of binding. The binding mechanism of both drugs to the swollen and collapsed gels was elucidated. Its main features are the cooperative character of the drug binding by the collapsed gel and the predominant role of the hydrophobicity of drugs in their affinity for the swollen gel.

Temperature-responsive microgel films as reversible carbon dioxide absorbents in wet environment

Hydrogel films composed of temperature-responsive microgel particles (GPs) containing amine groups work as stimuli-responsive carbon dioxide absorbent with a high capacity of approximately 1.7 mmol g(-1). Although the dried films did not show significant absorption, the reversible absorption capacity dramatically increased by adding a small amount of water (1 mL g(-1)). The absorption capacity was independent of the amount of added water beyond 1 mL g(-1), demonstrating that the GP films can readily be used under wet conditions. The amount of CO2 absorbed by the GP films was proportional to their thickness up to 200-300 μm (maximum capacity of about 2 L m(-2) . Furthermore, the films consisting of GPs showed faster and greater absorption and desorption of CO2 than that of monolithic hydrogel films. These results indicated the importance of a fast stimulus response rate of the films that are composed of GPs in order to achieve long-range and fast diffusion of bicarbonate ions. Our study revealed the potential of stimuli-responsive GP films as energy-efficient absorbents to sequester CO2 from high-humidity exhaust gases.