E-Olefins through intramolecular radical relocation

Alkene Isomerization Using a Heterogeneous Nickel-Hydride Catalyst

Transition metal-catalyzed alkene isomerization is an enabling technology used to install an alkene distal to its original site. Due to their well-defined structure, homogeneous catalysts can be fine-tuned to optimize reactivity, stereoselectivity, and positional selectivity, but they often suffer from instability and nonrecyclability. Heterogeneous catalysts are generally highly robust but continue to lack active-site specificity and are challenging to rationally improve through structural modification. Known single-site heterogeneous catalysts for alkene isomerization utilize precious metals and bespoke, expensive, and synthetically intense supports. Additionally, they generally have mediocre reactivity, inspiring us to develop a heterogeneous catalyst with an active site made from readily available compounds made of Earth-abundant elements. Previous work demonstrated that a very active homogeneous catalyst is formed upon protonation of Ni[P(OEt)3]4 by H2SO4, generating a [Ni-H]+ active site. This catalyst is incredibly active, but also decomposes readily, which severely limits its utility. Herein we show that by using a solid acid (sulfated zirconia, SZO300), not only is this decomposition prevented, but high activity is maintained, improved selectivity is achieved, and a broader scope of functional groups is tolerated. Preliminary mechanistic experiments suggest that the catalytic reaction likely goes through an intermolecular, two-electron pathway. A detailed kinetic study comparing the state-of-the-art Ni and Pd isomerization catalysts reveals that the highest activity and selectivity is seen with the Ni/SZO300 system. The reactivity of Ni/SZO300, is not limited to alkene isomerization; it is also a competent catalyst for hydroalkenylation, hydroboration, and hydrosilylation, demonstrating the broad application of this heterogeneous catalyst.

Stereodivergent, Kinetically Controlled Isomerization of Terminal Alkenes via Nickel Catalysis

Because internal alkenes are more challenging synthetic targets than terminal alkenes, metal-catalyzed olefin mono-transposition (i.e., positional isomerization) approaches have emerged to afford valuable E- or Z- internal alkenes from their complementary terminal alkene feedstocks. However, the applicability of these methods has been hampered by lack of generality, commercial availability of precatalysts, and scalability. Here, we report a nickel-catalyzed platform for the stereodivergent E/Z-selective synthesis of internal alkenes at room temperature. Commercial reagents enable this one-carbon transposition of terminal alkenes to valuable E- or Z-internal alkenes via a Ni-H-mediated insertion/elimination mechanism. Though the mechanistic regime is the same in both systems, the underlying pathways that lead to each of the active catalysts are distinct, with the Z-selective catalyst forming from comproportionation of an oxidative addition complex followed by oxidative addition with substrate and the E-selective catalyst forming from protonation of the metal by the trialkylphosphonium salt additive. In each case, ligand sterics and denticity control stereochemistry and prevent over-isomerization.

Chromium-Catalyzed Alkene Isomerization with Switchable Selectivity

We report a single additive-responsive chromium-catalyzed system for selectively producing either of two different internal alkene isomers. The chromium catalyst, in the presence of HBpin/LiOtBu, enables the isomerization of alkenes over multiple carbon atoms to give the most thermodynamically stable isomers. The same catalyst allows for the selective isomerization of terminal alkenes over one carbon atom without an additive, exhibiting efficient and controllable alkene transposition selectivity.

Conformational Isomerization as a Process to Determine Selectivity over Reaction Pathways: Effect of Alkene Rotation in Chain Walking via Cis Alkene Intermediates

In organic reactions, bond-forming and bond-cleaving processes are generally considered to be more important than other processes such as conformational isomerization. We report herein an example where a conformational isomerization process, propeller-like alkene rotation, is considered to determine the selectivity over the reaction pathways. The transition state with the highest energy barrier in some alkylpalladium isomerization (chain walking) events was theoretically indicated to correspond to alkene rotation, while transition states for bond-cleaving β-hydride elimination and bond-forming migratory insertion were not even observed. It was also suggested both theoretically and experimentally that the palladium chain walking over internal carbons in alkyl chains proceeds via cis alkene intermediates rather than thermodynamically more stable trans alkene intermediates, due to their relative difficulty to undergo alkene rotation.

A Neutral PCNHCP Co(I)-Me Pincer Complex as a Catalyst for N-Allylic Isomerization with a Broad Substrate Scope

Earth-abundant-metal catalyzed double bond transposition offers a sustainable and atom-economical route toward the synthesis of internal alkenes. With an emphasis specifically on internal olefins and ethers, the isomerization of allylic amines has been particularly under represented in the literature. Herein, we report an efficient methodology for the selective isomerization of N-allylic organic compounds, including amines, amides, and imines. The reaction is catalyzed by a neutral PCNHCP cobalt(I) pincer complex and proceeds via a π-allyl mechanism. The isomerization occurs readily at 80-90 °C, and it is compatible with a wide variety of functional groups. The in situ formed enamines could additionally be used for a one-pot inverse-electron-demand Diels-Alder reaction to furnish a series of diversely substituted heterobiaryls, which is further discussed in this report.

Ligand Relay for Nickel-Catalyzed Decarbonylative Alkylation of Aroyl Chlorides

Transition metal-catalyzed direct decarboxylative transformations of aromatic carboxylic acids usually require high temperatures, which limit the substrate's scope, especially for late-stage applications. The development of the selective decarbonylative of carboxylic acid derivatives, especially the most fundamental aroyl chlorides, with stable and cheap electrophiles under mild conditions is highly desirable and meaningful, but remains challenging. Herein, a strategy of nickel-catalyzed decarbonylative alkylation of aroyl chlorides via phosphine/nitrogen ligand relay is reported. The simple phosphine ligand is found essential for the decarbonylation step, while the nitrogen ligand promotes the cross-electrophile coupling. Such a ligand relay system can effectively and orderly carry out the catalytic process at room temperature, utilizing easily available aroyl chlorides as an aryl electrophile for reductive alkylation. This discovery provides a new strategy for direct decarbonylative coupling, features operationally simple, mild conditions, and excellent functional group tolerance. The mild approach is applied to the late-stage methylation of various pharmaceuticals. Extensive experiments are carried out to provide insights into the reaction pathway and support the ligand relay process.

Enantioselective Reductive Cross-Couplings of Olefins by Merging Electrochemistry with Nickel Catalysis

The merger of electrochemistry and transition metal catalysis has emerged as a powerful tool to join two electrophiles in an enantioselective manner. However, the development of enantioselective electroreductive cross-couplings of olefins remains a challenge. Inspired by the advantages of the synergistic use of electrochemistry with nickel catalysis, we present here a Ni-catalyzed enantioselective electroreductive cross-coupling of acrylates with aryl halides and alkyl bromides, which affords chiral α-aryl carbonyls in good to excellent enantioselectivity. Additionally, this catalytic reaction can be applied to (hetero)aryl chlorides, which is difficult to achieve by other methods. The combination of cyclic voltammetry analysis with electrode potential studies suggests that the NiI species activates aryl halides by oxidative addition and alkyl bromides by single-electron transfer.

Electrochemical Late-Stage Functionalization

Late-stage functionalization (LSF) constitutes a powerful strategy for the assembly or diversification of novel molecular entities with improved physicochemical or biological activities. LSF can thus greatly accelerate the development of medicinally relevant compounds, crop protecting agents, and functional materials. Electrochemical molecular synthesis has emerged as an environmentally friendly platform for the transformation of organic compounds. Over the past decade, electrochemical late-stage functionalization (eLSF) has gained major momentum, which is summarized herein up to February 2023.

Strain-Inducing Positional Alkene Isomerization

Small, strained ring systems are important pharmacophores in medicinal chemistry and versatile intermediates in organic synthesis. However, the kinetic and thermodynamic instability of many strained organic molecules renders them challenging to prepare. Here, we report a strain-inducing positional alkene isomerization reaction that provides mild and selective access to cyclobutene building blocks from readily obtained cyclobutylidene precursors. This endergonic isomerization relies on the sequential and synergistic action of a decatungstate polyanion photocatalyst and cobaloxime co-catalyst to store potential energy in the form of ring strain. The versatility of the cyclobutene products is demonstrated through diverse subsequent strain-releasing transformations. Mechanistic studies reveal a steric basis for strain-selective product formation.

Machine Learning-Guided Development of Trialkylphosphine Ni(I) Dimers and Applications in Site-Selective Catalysis

Owing to the unknown correlation of a metal's ligand and its resulting preferred speciation in terms of oxidation state, geometry, and nuclearity, a rational design of multinuclear catalysts remains challenging. With the goal to accelerate the identification of suitable ligands that form trialkylphosphine-derived dihalogen-bridged Ni^(I) dimers, we herein employed an assumption-based machine learning approach. The workflow offers guidance in ligand space for a desired speciation without (or only minimal) prior experimental data points. We experimentally verified the predictions and synthesized numerous novel Ni^(I) dimers as well as explored their potential in catalysis. We demonstrate C-I selective arylations of polyhalogenated arenes bearing competing C-Br and C-Cl sites in under 5 min at room temperature using 0.2 mol % of the newly developed dimer, [Ni^(I)(μ-Br)PAd₂(n-Bu)]₂, which is so far unmet with alternative dinuclear or mononuclear Ni or Pd catalysts.

Evidence for Ruthenium(II) Peralkene Complexes as Catalytic Species during the Isomerization of Terminal Alkenes in Solution

The isomerization (chain-walking) reaction of terminal to internal alkenes is catalyzed by part-per-million amounts of practically any Ru source when the reaction is carried out with a neat terminal alkene. Here, we provide evidence that the soluble starting Ru sources evolve to catalytically active peralkene Ru(II) species under reaction conditions. These species may also explain the isomerization products found during other Ru-catalyzed alkene processes, i.e., alkene metathesis reactions. A Finke-Watzky mechanism for catalyst formation is consistent with the evidence obtained.

Migratory allylic arylation of 1,n-enols enabled by nickel catalysis

Transition-metal-catalyzed allylic substitution reactions (Tsuji-Trost reactions) proceeding via a π-allyl metal intermediate have been demonstrated as a powerful tool in synthetic chemistry. Herein, we disclose an unprecedented π-allyl metal species migration, walking on the carbon chain involving 1,4-hydride shift as confirmed by deuterium labeling experiments. This migratory allylic arylation can be realized under dual catalysis of nickel and lanthanide triflate, a Lewis acid. Olefin migration has been observed to preferentially occur with the substrate of 1,n-enols (n ≥ 3). The robust nature of the allylic substitution strategy is reflected by a broad scope of substrates with the control of regio- and stereoselectivity. DFT studies suggest that π-allyl metal species migration consists of the sequential β-H elimination and migratory insertion, with diene not being allowed to release from the metal center before producing a new π-allyl nickel species.

Ni-catalyzed mild hydrogenolysis and oxidations of C-O bonds via carbonate redox tags

Oxygenated molecules are omnipresent in natural as well as artificial settings making the redox transformation of the present C-O bonds a central tool for their processing. However, the required (super)stoichiometric redox agents which traditionally include highly reactive and hazardous reagents pose multiple practical challenges including process safety hazards or special waste management requirements. Here, we report a mild Ni-catalyzed fragmentation strategy based on carbonate redox tags for redox transformations of oxygenated hydrocarbons in the absence of any external redox equivalents or other additives. The purely catalytic process enables the hydrogenolysis of strong C(sp²)-O bonds including that of enol carbonates as well as the catalytic oxidation of C-O bonds under mild conditions down to room temperature. Additionally, we investigated the underlying mechanism and showcased the benefits of carbonate redox tags in multiple applications. More broadly, the work herein demonstrates the potential of redox tags for organic synthesis.

Metalloradical approach for concurrent control in intermolecular radical allylic C-H amination

Although they offer great potentials, the high reactivity and diverse pathways of radical chemistry pose difficult problems for applications in organic synthesis. In addition to the differentiation of multiple competing pathways, the control of various selectivities in radical reactions presents both formidable challenges and great opportunities. To regulate chemoselectivity and regioselectivity, as well as diastereoselectivity and enantioselectivity, calls for the formulation of conceptually new approaches and fundamentally different governing principles. Here we show that Co(II)-based metalloradical catalysis enables the radical chemoselective intermolecular amination of allylic C-H bonds through the employment of modularly designed D2-symmetric chiral amidoporphyrins with a tunable pocket-like environment as the supporting ligand. The reaction exhibits a remarkable convergence of regioselectivity, diastereoselectivity and enantioselectivity in a single catalytic operation. In addition to demonstrating the unique opportunities of metalloradical catalysis in controlling homolytic radical reactions, the Co(II)-catalysed convergent C-H amination offers a route to synthesize valuable chiral α-tertiary amines directly from an isomeric mixture of alkenes.

Our Voyage from Catalytic Cross-Hydroalkenylation to Transfer-Dehydroaromatization of Cyclic π-Systems: Reactivity and Selectivity Changes Enabled by NHC-Ni and NHC-Pd Hydride Equivalents

N-Heterocyclic carbene ligated transition-metal catalysts often show interesting properties and reactivity as compared to conventional ligand systems. In (NHC)Ni and (NHC)Pd hydrides, a dramatic reactivity changed from cross-hydroalkenylation to transfer-dehydroaromatization was observed under optimized conditions. This account summarizes our recent efforts and stories behind this serendipitous discovery. The mechanistic studies revealed that the keys to divert the desired reactivity are the differences in the olefin insertion selectivity and the hydrometallated species reactivity.

Chromium-catalyzed stereodivergent E- and Z-selective alkyne hydrogenation controlled by cyclic (alkyl)(amino)carbene ligands

The hydrogenation of alkynes allows the synthesis of olefins, which are important feedstock for the materials, pharmaceutical, and petrochemical industry. Thus, methods that enable this transformation via low-cost metal catalysis are desirable. However, achieving stereochemical control in this reaction is a long-standing challenge. Here, we report on the chromium-catalyzed E- and Z-selective olefin synthesis via hydrogenation of alkynes, controlled by two carbene ligands. A cyclic (alkyl)(amino)carbene ligand that contains a phosphino anchor enables the hydrogenation of alkynes in a trans-addition manner, selectively forming E-olefins. With an imino anchor-incorporated carbene ligand, the stereoselectivity can be switched, giving mainly Z-isomers. This ligand-enabled geometrical stereoinversion strategy by one metal catalysis overrides common methods in control of the E- and Z-selectivity with two different metal catalysis, allowing for highly efficient and on-demand access to both E- and Z-olefins in a stereo-complementary fashion. Mechanistic studies indicate that the different steric effect between these two carbene ligands may mainly dominate the selective forming E- or Z-olefins in control of the stereochemistry.

Asymmetric intermolecular allylic C-H amination of alkenes with aliphatic amines

Aliphatic allylic amines are found in a great variety of complex and biorelevant molecules. The direct allylic C-H amination of alkenes serves as the most straightforward method toward these motifs. However, use of widely available internal alkenes with aliphatic amines in this transformation remains a synthetic challenge. In particular, palladium catalysis faces the twin challenges of inefficient coordination of Pd(II) to internal alkenes but excessively tight and therefore inhibitory coordination of Pd(II) by basic aliphatic amines. We report a general solution to these problems. The developed protocol, in contrast to a classical Pd(II/0) scenario, operates through a blue light-induced Pd(0/I/II) manifold with mild aryl bromide oxidant. This open-shell approach also enables enantio- and diastereoselective allylic C-H amination.

B(C6 F5 )3 -Catalyzed E-Selective Isomerization of Alkenes

Herein, we report the B(C₆ F₅ )₃ -catalyzed E-selective isomerization of alkenes. The transition-metal-free method is applicable across a diverse array of readily accessible substrates, giving access to a broad range of synthetically useful products containing versatile stereodefined internal alkenes. The reaction mechanism was investigated by using synthetic and computational methods.

Rh-catalyzed regio-switchable cross-coupling of gem-difluorinated cyclopropanes with allylboronates to structurally diverse fluorinated dienes

The control of linear/branched selectivity is one of the major focuses in transition-metal catalyzed allyl-allyl cross-coupling reactions, in which bond connection occurs at the terminal site of both the allyl fragments forming different types of 1,5-dienes. Herein, terminal/internal regioselectivity is investigated and found to be switchable in allyl-allyl cross-coupling reactions between gem-difluorinated cyclopropanes and allylboronates. The controlled terminal/internal regioselectivity arises from the fine-tuning of the rhodium catalytic system. Fluorinated 1,3-dienes, 1,4-dienes and 1,5-dienes are therefore produced in good yields with respectively isomerized terminal, internal, and terminal regioselectivity.

Electron Shuttle in N-Heteroaromatic Ni Catalysts for Alkene Isomerization

Simple N-heteroaromatic Ni(II) precatalysts, (L)NiMe₂ (L = bipy, bipym), were used for alkene isomerization. With an original reduction method using a simple borane (HB(Cat)), a low-valent Ni center was formed readily and showed good conversion when a reducing divalent lanthanide fragment, Cp*₂Yb, was coordinated to the (bipym)NiMe₂ complex, a performance not achieved by the monometallic (bipy)NiMe₂ analogue. Experimental mechanistic investigations and computational studies revealed that the redox non-innocence of the L ligand triggered an electron shuttle process, allowing the elusive formation of Ni(I) species that were central to the isomerization process. Additionally, the reaction occurred with a preference for mono-isomerization rather than chain-walking isomerization. The presence of the low-valent ytterbium fragment, which contributed to the formation of the electron shuttle, strongly stabilized the catalysts, allowing catalytic loading as low as 0.5%. A series of alkenes with various architectures have been tested. The possibility to easily tune the various components of the heterobimetallic catalyst reported here, the ligand L and the divalent lanthanide fragment, opens perspectives for further applications in catalysis induced by Ni(I) species.

Switching between Hydrogenation and Olefin Transposition Catalysis via Silencing NH Cooperativity in Mn(I) Pincer Complexes

While Mn-catalyzed (de)hydrogenation of carbonyl derivatives has been well established, the reactivity of Mn hydrides with olefins remains very rare. Herein, we report a Mn(I) pincer complex that effectively promotes site-controlled transposition of olefins. This reactivity is shown to emerge once the N–H functionality within the Mn/NH bifunctional complex is suppressed by alkylation. While detrimental for carbonyl (de)hydrogenation, such masking of the cooperative N–H functionality allows for the highly efficient conversion of a wide range of allylarenes to higher-value 1-propenybenzenes in near-quantitative yield with excellent stereoselectivities. The reactivity toward a single positional isomerization was also retained for long-chain alkenes, resulting in the highly regioselective formation of 2-alkenes, which are less thermodynamically stable compared to other possible isomerization products. The detailed mechanistic analysis of the reaction between the activated Mn catalyst and olefins points to catalysis operating via a metal–alkyl mechanism—one of the three conventional transposition mechanisms previously unknown in Mn complexes.

A New Paradigm in Pincer Iridium Chemistry: PCN Complexes for (De)Hydrogenation Catalysis and Beyond

The discovery and development of organometallic catalysts is of paramount importance in modern organic synthesis, among which the ligand scaffolds play a crucial role in controlling the activity and selectivity. Over the past several decades, d⁸ transition-metal complexes of pincer ligands have been developed extensively thanks to their easy structural modification, versatile reactivities, and high stability. One paradigm is the bis(phosphine)-based pincer iridium complexes PCP-Ir, which are highly active for alkane dehydrogenation, partly due to their high thermostability. However, except for alkane dehydrogenation and related transformations, few applications of pincer iridium catalysis have been seen in organic synthesis. This mainly arises from the low functional-group compatibility and poor substrate scope and the limited catalytic chemistry that invariably involves Ir(I/III) redox processes initiated by oxidative addition of substrates to 14-electron (PCP)Ir fragments (the proposed catalytically active intermediates). In this Account, we describe our endeavor on the development of a new family of PCN-Ir complexes with initial intention on creating more efficient alkane dehydrogenation catalysts. The replacement of a soft, σ-donor phosphine arm in the PCP ligands by a harder, π-acceptor N-heteroarene (pyridine or oxazoline) not only provides an additional platform to modify the structural properties but also offers new modes of bond activation and novel reactivities and catalysis. One uniqueness of the PCN-Ir system lies in the formation, via ortho-C(sp²)-H cyclometalation of the pyridine unit in the PCN_Py ligand, of the neutral monohydride (PCC)Ir^IIIHL (L = neutral ligand), which catalyzes positional and stereoselective 1-alkene-to-(E)-2-alkene isomerization. Moreover, the PCN-Ir catalysts effect ethanol dehydrogenation without decarbonylation, allowing for transfer hydrogenation of unactivated alkenes and trans-selective semihydrogenation of internal alkynes with user-friendly ethanol as the H-donor. Another feature originates from the ability of the pentacoordinate hydrido chloride complex (PCN)Ir^IIIHCl to undergo reversible solvent-coordination-induced-ionization (SCII), furnishing a cationic monohydride [(PCN)Ir^IIIH(Sol)]⁺Cl^- bearing an uncoordinated Cl anion that effects selective hydrometalation of internal alkynes over the corresponding (Z)-alkenes; the resulting (PCN)Ir^III(vinyl)Cl complex undergoes amine-assisted formal alcoholysis involving the protonation of the Cl anion by the activated Ir^III-bound EtOH, again via the SCII pathway. Together these elementary reactions lay the foundation for cis-selective semihydrogenation of alkynes with EtOH. Further, the design of the oxazoline-containing chiral complexes (PCN_Oxa)Ir^IIIHCl enables asymmetric transfer hydrogenation of alkenes/ketones with ethanol. The efficient catalytic α-alkylation of unactivated esters/amides with alcohols is another case showing the benefit that the PCN-Ir catalyst can offer. These examples illustrate the profound impact of the pincer ligands on the reactivities and catalysis. We hope this Account will provide an in-depth view into the fundamentals of pincer iridium chemistry and ultimately broaden its applications in organic synthesis.

Synthesis of Cyclic Fragrances via Transformations of Alkenes, Alkynes and Enynes: Strategies and Recent Progress

With increasing demand for customized commodities and the greater insight and understanding of olfaction, the synthesis of fragrances with diverse structures and odor characters has become a core task. Recent progress in organic synthesis and catalysis enables the rapid construction of carbocycles and heterocycles from readily available unsaturated molecular building blocks, with increased selectivity, atom economy, sustainability and product diversity. In this review, synthetic methods for creating cyclic fragrances, including both natural and synthetic ones, will be discussed, with a focus on the key transformations of alkenes, alkynes, dienes and enynes. Several strategies will be discussed, including cycloaddition, catalytic cyclization, ring-closing metathesis, intramolecular addition, and rearrangement reactions. Representative examples and the featured olfactory investigations will be highlighted, along with some perspectives on future developments in this area.

Cobalt-electrocatalytic HAT for functionalization of unsaturated C-C bonds

The study and application of transition metal hydrides (TMHs) has been an active area of chemical research since the early 1960s¹, for energy storage, through the reduction of protons to generate hydrogen^2,3, and for organic synthesis, for the functionalization of unsaturated C-C, C-O and C-N bonds^4,5. In the former instance, electrochemical means for driving such reactivity has been common place since the 1950s⁶ but the use of stoichiometric exogenous organic- and metal-based reductants to harness the power of TMHs in synthetic chemistry remains the norm. In particular, cobalt-based TMHs have found widespread use for the derivatization of olefins and alkynes in complex molecule construction, often by a net hydrogen atom transfer (HAT)⁷. Here we show how an electrocatalytic approach inspired by decades of energy storage research can be made use of in the context of modern organic synthesis. This strategy not only offers benefits in terms of sustainability and efficiency but also enables enhanced chemoselectivity and distinct, tunable reactivity. Ten different reaction manifolds across dozens of substrates are exemplified, along with detailed mechanistic insights into this scalable electrochemical entry into Co-H generation that takes place through a low-valent intermediate.

Parts-per-million of ruthenium catalyze the selective chain-walking reaction of terminal alkenes

The chain–walking of terminal alkenes (also called migration or isomerization reaction) is currently carried out in industry with unselective and relatively costly processes, to give mixtures of alkenes with significant amounts of oligomerized, branched and reduced by–products. Here, it is shown that part–per–million amounts of a variety of commercially available and in–house made ruthenium compounds, supported or not, transform into an extremely active catalyst for the regioselective migration of terminal alkenes to internal positions, with yields and selectivity up to >99% and without any solvent, ligand, additive or protecting atmosphere required, but only heating at temperatures >150 °C. The resulting internal alkene can be prepared in kilogram quantities, ready to be used in nine different organic reactions without any further treatment.

The chain-walking of terminal alkenes is an industrially relevant reaction. Here, the authors show that part-per-million amounts of a variety of ruthenium compounds catalyze the reaction in yields and selectivity up to >99%, without any solvent or additive.

Cobalt-Catalyzed Z to E Geometrical Isomerization of 1,3-Dienes

An efficient cobalt-catalyzed geometrical isomerization of 1,3-dienes is described. In the combination of a CoCl₂ precatalyst with an amido-diphosphine-oxazoline ligand, the geometrical isomerization of E/Z mixtures of 1,3-dienes proceed in a stereoconvergent manner, affording (E) isomers in high stereoselectivity. This facile transformation features a broad substrate scope with good functional group tolerance and could be scaled up to the gram scale smoothly with a catalyst loading of 1 mol %.

Aza-Heterocycles via Copper-Catalyzed, Remote C-H Desaturation of Amines

The majority of medicines contain a nitrogen atom within a five- or six- membered ring. To rapidly access both such aza-heterocycles, we sought to develop a remote C-H desaturation of amines. Inspired by the Hofmann-Löffler-Freytag synthesis of five-membered pyrrolidines, we tackled the century-old challenge of synthesizing six-membered piperidines by H-atom transfer. We present herein a double, vicinal C-H oxidation by dual catalysis, entailing Ir photocatalytic initiation of 1,5-HAT by an N-centered radical and Cu-catalyzed interception of the C-centered radical to facilitate desaturation. By this mechanism, two C-H bonds (δ and ε to N) are regioselectively removed from unbiased, remote positions of an alkyl chain. Over 50 examples illustrate efficiency, selectivity, functional group tolerance, and medicinal utility of this synthesis of both internal and terminal δ vinylic amines and aza-heterocycles. Mechanistic experiments probe the alkylcopper intermediate, as well as kinetics and regioselectivity of the HAT and elimination steps.

Air-Stable PdI Dimer Enabled Remote Functionalization: Access to Fluorinated 1,1-Diaryl Alkanes with Unprecedented Speed

While remote functionalization via chain walking has the potential to enable access to molecules via novel disconnections, such processes require relatively long reaction times and can be in need of elevated temperatures. This work features a remote arylation in less than 10 min reaction time at room temperature over a distance of up to 11 carbons. The unprecedented speed is enabled by the air‐stable Pd^I dimer [Pd(μ‐I)(PCy₂^tBu)]₂, which in contrast to its P^tBu₃ counterpart does not trigger direct coupling at the initiation site, but regioconvergent and chemoselective remote functionalization to yield valuable fluorinated 1,1‐diaryl alkanes. Our combined experimental and computational studies rationalize the origins of switchability, which are primarily due to differences in dispersion interactions.

Highly selective acid-catalyzed olefin isomerization of limonene to terpinolene by kinetic suppression of the overreactions in a confined space of porous metal-macrocycle framework

Natural enzymes control the intrinsic reactivity of chemical reactions in the natural environment, giving only the necessary products. In recent years, challenging research on the reactivity control of terpenes with structural diversity using artificial host compounds that mimic such enzymatic reactions has been actively pursued. A typical example is the acid-catalyzed olefin isomerization of (+)-limonene, which generally gives a complex mixture due to over-isomerization to thermodynamically favored isomers. Herein we report a highly controlled conversion of (+)-limonene by kinetic suppression of over-isomerization in a confined space of a porous metal–macrocycle framework (MMF) equipped with a Brønsted acid catalyst. The terminal double bond of (+)-limonene migrated to one neighbor, preferentially producing terpinolene. This reaction selectivity was in stark contrast to the homogeneous acid-catalyzed reaction in bulk solution and to previously reported catalytic reactions. X-ray structural analysis and examination of the reaction with adsorption inhibitors suggest that the reactive substrates may bind non-covalently to specific positions in the confined space of the MMF, thereby inhibiting the over-isomerization reaction. The nanospaces of the MMF with substrate binding ability are expected to enable highly selective synthesis of a variety of terpene compounds.

A porous metal–macrocycle framework (MMF) equipped with a Brønsted acid catalyst in nanochannels enables highly selective isomerization of limonene to terpinolene by kinetically suppressing over-isomerization at confined acid sites.

Catalytic, contra-Thermodynamic Positional Alkene Isomerization

The positional isomerization of C═C double bonds is a powerful strategy for the interconversion of alkene regioisomers. However, existing methods provide access to thermodynamically more stable isomers from less stable starting materials. Here, we report the discovery of a dual catalyst system that promotes contra-thermodynamic positional alkene isomerization under photochemical irradiation, providing access to terminal alkene isomers directly from conjugated, internal alkene starting materials. The utility of the method is demonstrated in the deconjugation of diverse electron-rich/electron-poor alkenes and through strategic application to natural product synthesis. Mechanistic studies are consistent with a regiospecific bimolecular homolytic substitution (S_H2') mechanism proceeding through an allyl-cobaloxime intermediate.

Contra-Thermodynamic Positional Isomerization of Olefins

A light-driven method for the contra-thermodynamic positional isomerization of olefins is described. In this work, stepwise PCET activation of a more substituted and more thermodynamically stable olefin substrate is mediated by an excited-state oxidant and a Brønsted base to afford an allylic radical that is captured by a Cr(II) cocatalyst to furnish an allylchromium(III) intermediate. In situ protodemetalation of this allylchromium complex by methanol is highly regioselective and affords an isomerized and less thermodynamically stable alkene product. The higher oxidation potential of the less substituted olefin isomer renders it inert to further oxidation by the excited-state oxidant, enabling it to accumulate in solution over the course of the reaction. A broad range of isopropylidene substrates are accommodated, including enol ethers, enamides, styrenes, 1,3-dienes, and tetrasubstituted alkyl olefins. Mechanistic investigations of the protodemetalation step are also presented.

Cobalt-Catalyzed Desymmetric Isomerization of Exocyclic Olefins

Chiral cyclic olefins, 1-methylcyclohexenes, are versatile building blocks for the synthesis of pharmaceuticals and natural products. Despite the prevalence of these structural motifs, the development of efficient synthetic methods remains an unmet challenge. Herein we report a novel desymmetric isomerization of exocyclic olefins using a series of newly designed chiral cobalt catalysts, which enables a straightforward construction of chiral 1-methylcyclohexenes with diversified functionalities. The synthetic utility of this methodology is highlighted by a concise and enantioselective synthesis of a natural product, β-bisabolene. The versatility of the reaction products is further demonstrated by multifarious derivatizations.

Directing-group-free catalytic dicarbofunctionalization of unactivated alkenes

In the absence of directing auxiliaries, the catalytic addition of carbogenic groups to unactivated alkenes with control of regioselectivity remains an ongoing challenge in organic chemistry. Here we describe a directing-group-free, nickel-catalysed strategy that couples a broad array of unactivated and activated olefins with aryl-substituted triflates and organometallic nucleophiles to afford diarylation adducts in either regioisomeric form, in up to 93% yield and >98% site selectivity. By switching the reagents involved, the present strategy may be extended to other classes of dicarbofunctionalization reactions. Mechanistic and computational investigations offer insights into the origin of the observed regiochemical outcome and the utility of the method is highlighted through the concise syntheses of biologically active molecules. The catalyst control principles reported are expected to advance efforts towards the development of general site-selective alkene functionalizations, removing the requirement for neighbouring activating groups.

Palladium-Catalyzed Remote Diborylative Cyclization of Dienes with Diborons via Chain Walking

A novel method for catalytic remote bismetalation of alkene substrates by the addition of dimetal reagents is accomplished by using chain walking. In the presence of a palladium catalyst, the reaction of various 1,n-dienes and diborons were converted into cyclopentane derivatives with two boryl groups at remote positions via facile regioselective transformation of an unactivated sp³ C-H bond to a C-B bond. Sequential construction of three distant bonds, which is difficult to achieve by any method, was accomplished for the reactions of 1,n-dienes (n ≥ 7).