Novel Metal Cation Resistance Systems from Mutant Fitness Analysis of Denitrifying Pseudomonas stutzeri

Technical considerations for cost-effective transposon directed insertion-site sequencing (TraDIS)

Transposon directed insertion-site sequencing (TraDIS), a variant of transposon insertion sequencing commonly known as Tn-Seq, is a high-throughput assay that defines essential bacterial genes across diverse growth conditions. However, the variability between laboratory environments often requires laborious, time-consuming modifications to its protocol. In this technical study, we aimed to refine the protocol by identifying key parameters that can impact the complexity of mutant libraries. Firstly, we discovered that adjusting electroporation parameters including transposome concentration, transposome assembly conditions, and cell densities can significantly improve the recovery of viable mutants for different Escherichia coli strains. Secondly, we found that post-electroporation conditions, such as recovery time and the use of different mediums for selecting mutants may also impact the complexity of viable mutants in the library. Finally, we developed a simplified sequencing library preparation workflow based on a Nextera-TruSeq hybrid design where ~ 80% of sequenced reads correspond to transposon-DNA junctions. The technical improvements presented in our study aim to streamline TraDIS protocols, making this powerful technique more accessible for a wider scientific audience.

Zinc homeostasis in Pseudomonas

In the genus Pseudomonas, zinc homeostasis is mediated by a complete set of import and export systems, whose expression is precisely controlled by three transcriptional regulators: Zur, CzcR and CadR. In this review, we describe in detail our current knowledge of these systems, their regulation, and the biological significance of zinc homeostasis, taking Pseudomonas aeruginosa as our paradigm. Moreover, significant parts of this overview are dedicated to highlight interactions and cross-regulations between zinc and copper import/export systems, and to shed light, through a review of the literature and comparative genomics, on differences in gene complement and function across the whole Pseudomonas genus. The impact and importance of zinc homeostasis in Pseudomonas and beyond will be discussed throughout this review.

Graphical abstract

Biofilm Interaction Mapping and Analysis (BIMA) of Interspecific Interactions in Pseudomonas Co-culture Biofilms

Pseudomonas species are ubiquitous in nature and include numerous medically, agriculturally and technologically beneficial strains of which the interspecific interactions are of great interest for biotechnologies. Specifically, co-cultures containing Pseudomonas stutzeri have been used for bioremediation, biocontrol, aquaculture management and wastewater denitrification. Furthermore, the use of P. stutzeri biofilms, in combination with consortia-based approaches, may offer advantages for these processes. Understanding the interspecific interaction within biofilm co-cultures or consortia provides a means for improvement of current technologies. However, the investigation of biofilm-based consortia has been limited. We present an adaptable and scalable method for the analysis of macroscopic interactions (colony morphology, inhibition, and invasion) between colony-forming bacterial strains using an automated printing method followed by analysis of the genes and metabolites involved in the interactions. Using Biofilm Interaction Mapping and Analysis (BIMA), these interactions were investigated between P. stutzeri strain RCH2, a denitrifier isolated from chromium (VI) contaminated soil, and 13 other species of pseudomonas isolated from non-contaminated soil. One interaction partner, Pseudomonas fluorescens N1B4 was selected for mutant fitness profiling of a DNA-barcoded mutant library; with this approach four genes of importance were identified and the effects on interactions were evaluated with deletion mutants and mass spectrometry based metabolomics.

Study on the aerobic remediation of Ni(II) by Pseudomonas hibiscicola strain L1 interaction with nitrate

Aerobic denitrifying bacteria have the potential to remove the co-pollutants Ni(II) and nitrate in industrial wastewater. In this study, aerobic denitrifying bacteria with significant Ni(II) removal efficiency was isolated from the biological reaction tank and named as Pseudomonas hibiscicola L1 strain after 16 S rRNA identification analysis. The removal of ever-increasing Ni(II) and NO₃^--N wastewater under aerobic conditions by strain L1 was discussed. The experimental results showed that strain L1 removed 84% of Ni(II) and 81% of COD, with the use of 34.8 mg L^-1 of nitrogen source and without nitrite accumulation yet. Strain L1 had remarkable activity (OD₆₀₀ = 0.51-0.56 (p < 0.05)) at 20 mg L^-1 of Ni(II) and 100 mg L^-1 of NO₃^--N. It was found that high Ni(II) gradients (2-10 mg L^-1) had little effect on nitrate removal ratio (35-34% (p > 0.05), and the removal ratios of Ni(II) was enhanced (from 42% to 83% (p < 0.05)) by increasing nitrate (25-100 mg L^-1). Also, the results indicated that strain L1 could reduce Ni(II) and nitrate under different pH (6-9); electron donor-glucose, sodium acetate, sodium succinate and trisodium citrate; C/N (5-20) and coexisting ions (Cu(II) and Zn(II)). Notably, the nitrogen balance analysis showed 32.4% of TN was lost nitrogen and 19.7% of TN was assimilated for cell growth, which indicated aerobic denitrification process of strain L1. Meanwhile, characterization technology (SEM, FTIR, and XRD) showed Ni(II) was bioadsorbed in the form of Ni(NH₂)₂, NiCO₃, and Ni(OH)₂·2H₂O through surface functional groups. This research provides new microbial method for the simultaneous removal of nitrate and Ni(II) in wastewater.

Molecular genetic analysis of an XDR Pseudomonas aeruginosa ST664 clone carrying multiple conjugal plasmids

OBJECTIVES

A group of ST664 XDR Pseudomonas aeruginosa strains have been isolated from a burn clinic. Here we decipher their resistomes and likely mechanisms of resistance acquisition.

METHODS

The complete nucleotide sequences of representative isolates were determined, by PacBio and Illumina MiSeq sequencing, and analysed for antimicrobial resistance (AMR) genes as well as sequence variations. S1-PFGE was used to determine the sizes and numbers of plasmids harboured by the isolates. Purified plasmid DNA was further sequenced by PacBio technology, closed manually and annotated by RAST. The mobility of plasmids was determined by conjugation assays.

RESULTS

The XDR P. aeruginosa ST664 clone carries 11 AMR genes, including a blaKPC-2 gene that confers resistance to carbapenems. Most of the ST664 isolates carry three coexisting plasmids. blaKPC-2 and a cluster of three AMR genes (aadB-cmlA1-sul1) are encoded on a 475 kb megaplasmid pNK546a, which codes for an IncP-3-like replication and partitioning mechanism, but has lost the conjugative transfer system. Interestingly, however, pNK546a is mobilizable and can be transferred to P. aeruginosa PAO1 with the help of a co-residing IncP-7 conjugative plasmid. The blaKPC-2 gene is carried by an IS6100-ISKpn27-blaKPC-2-ΔISKpn6-Tn1403 mobile element, which might be brought into the ST664 clone by another co-resident IncP-1α plasmid, which is inclined to be lost. Moreover, pNK546a harbours multiple heavy metal (mercury, tellurite and silver) resistance modules.

CONCLUSIONS

To the best of our knowledge, pNK546a is the first fully sequenced blaKPC-2-carrying megaplasmid from P. aeruginosa. These results give new insights into bacterial adaptation and evolution during nosocomial infections.

Mycoremediation of heavy metals: processes, mechanisms, and affecting factors

Industrial processes and mining of coal and metal ores are generating a number of threats by polluting natural water bodies. Contamination of heavy metals (HMs) in water and soil is the most serious problem caused by industrial and mining processes and other anthropogenic activities. The available literature suggests that existing conventional technologies are costly and generated hazardous waste that necessitates disposal. So, there is a need for cheap and green approaches for the treatment of such contaminated wastewater. Bioremediation is considered a sustainable way where fungi seem to be good bioremediation agents to treat HM-polluted wastewater. Fungi have high adsorption and accumulation capacity of HMs and can be potentially utilized. The most important biomechanisms which are involved in HM tolerance and removal by fungi are bioaccumulation, bioadsorption, biosynthesis, biomineralisation, bioreduction, bio-oxidation, extracellular precipitation, intracellular precipitation, surface sorption, etc. which vary from species to species. However, the time, pH, temperature, concentration of HMs, the dose of fungal biomass, and shaking rate are the most influencing factors that affect the bioremediation of HMs and vary with characteristics of the fungi and nature of the HMs. In this review, we have discussed the application of fungi, involved tolerance and removal strategies in fungi, and factors affecting the removal of HMs.

Draft whole genome sequence for four highly copper resistant soil isolates Pseudomonas lactis strain UKR1, Pseudomonas panacis strain UKR2, and Pseudomonas veronii strains UKR3 and UKR4

•

Four bacterial strains with record resistance to Cu(II) have been isolated.

•

Genomic sequences are available for genome mining and studying the genetic determinants of bacterial resistance to Cu(II).

•

Genomic sequences provide the foundation necessary for transcriptional and functional studies of genes encoding for Cu(II) resistance mechanisms in Pseudomonas spp.

•

The data will be of interest for a broad community of biotechnologists and microbiologists and will aid in developing novel technologies for copper detoxification in contaminated soils and industrial wastewaters.

Environmental copper pollution causes major destruction to ecological systems, which require the development of environmentally friendly biotechnological, in particular, microbial methods for copper removal. These methods rely on the availability of microorganisms resistant to high levels of copper. Here we isolated four bacterial strains with record resistance to up to 1.0 M Cu(II). The strains were isolated from ecologically diverse soil samples, and their genomes were sequenced. A 16S rRNA sequence-based phylogenetic analysis identified that all four isolates belong to the genus Pseudomonas. Particularly, strains UKR1 and UKR2 isolated from Kyiv region in Ukraine were identified as P. lactis and P. panacis, respectively, and strains UKR3 and UKR4 isolated from Svalbard Island in the Arctic Ocean and Galindez Island in Antarctica, respectively, were identified as P. veronii. Initial in-silico screening for genes encoding copper resistance mechanisms showed that all four strains encode copper resistance proteins CopA, CopB, CopD, CopA3, CopZ, as well as two-component regulatory system CusRS, all known to be associated with metal resistance in Pseudomonas genus. Further detailed studies will aim to characterize the full genomic potential of the isolates to enable their application for copper bioremediation in contaminated soils and industrial wastewaters.

Hexavalent chromium stress response, reduction capability and bioremediation potential of Trichoderma sp. isolated from electroplating wastewater

In the present study we are investigating the Cr_(VI) reduction potential of a multi-metal tolerant fungus (isolate CR700); isolated from electroplating wastewater. Based on the ITS region sequencing, the isolate was identified as Trichoderma lixii isolate CR700 and able to tolerate As(2000 mg/L), Ni(1500 mg/L), Zn(1200 mg/L), Cu(1200 mg/L), Cr(1000 mg/L), and 100 mg/L of Pb and Cd evident from tolerance assay. Cr_(VI) reduction experiment was conducted in Erlenmeyer flasks containing different concentration of Cr_(VI) (0-200 mg/L) amended potato dextrose broth medium followed by inoculating with a disk (0.5 cm diameter) of 7 days grown isolate CR700, and achieved a maximum of 99.4% within 120 h at 50 mg/L of Cr_(VI). However, the accumulation of total Cr by isolate CR700 was 2.12 ± 0.15 mg/g of dried biomass at the same concentration after 144 h of exposure. Isolate CR700 showed the capability to reduce Cr_(VI) at different physicochemical stress conditions such as pH, temperature, heavy metals, metabolic inhibitor and also in tannery wastewater. Fungus exhibited multifarious morphological and biochemical response under the exposure of Cr_(VI); the scanning electron microscopic analysis revealed that Cr_(VI) treated mycelia of isolate CR700 comparatively irregular, aggregated and swelled than without treated mycelia which might be due to the tolerance mechanism and vacuolar compartmentation of chromium. Moreover, energy dispersive spectroscopy and x-ray photoelectron spectroscopic analysis exposed the Cr_(III) precipitation on the mycelia surface of isolate CR700 and Fourier-transform infrared spectroscopic analysis suggested the contribution of the protein associated functional group in the complexation of Cr_(VI). The phytotoxicity test of fungal treated 100 mg/L of Cr_(VI) supernatant on Vigna radiata and Cicer arietinum revealed the successful detoxification/remediation of Cr_(VI).

Hexavalent chromium reduction ability and bioremediation potential of Aspergillus flavus CR500 isolated from electroplating wastewater

Hexavalent chromium reduction by microbes can mitigate the chromium toxicity to the environment. In the present study Cr_[VI] tolerant fungal isolate (CR500) was isolated from electroplating wastewater, was able to tolerate 800 mg/L of Cr_[VI. Based on the ITS region sequencing, the isolate was identified as Aspergillus flavus CR500, showed multifarious biochemical (reactive oxygen species, antioxidants response and non-protein thiol) and morphological (protrusion less, constriction and swelling/outwards growth in mycelia) response under Cr_[VI] stress. Batch experiment was conducted at different Cr_[VI] concentration (0-200 mg/L) to optimize the Cr_[VI] reduction and removal ability of isolate CR500; results showed 89.1% reduction of Cr_[VI] to Cr_[III] within 24 h and 4.9 ± 0.12 mg of Cr per gram of dried biomass accumulation within 144 h at the concentration of 50 mg/L of Cr_[VI]. However, a maximum of 79.4% removal of Cr was recorded at 5 mg/L within 144 h. Fourier-transform infrared spectroscopy, energy dispersive x-ray spectroscopy and X-ray diffraction analysis revealed that chromium removal also happened via adsorption/precipitation on the mycelia surface. Fungus treated and without treated 100 mg/L of Cr_[VI] solution was subjected to phytotoxicity test using Vigna radiata seeds and result revealed that A. flavus CR500 successfully detoxified the Cr_[VI] via reduction and removal mechanisms. Isolate CR500 also exhibited efficient bioreduction potential at different temperature (20-40 °C), pH (5.0-9.0), heavy metals (As, Cd, Cu, Mn, Ni and Pb), metabolic inhibitors (phenol and EDTA) and in sterilized tannery effluent that make it a potential candidate for Cr_[VI] bioremediation.

Nitrate-Utilizing Microorganisms Resistant to Multiple Metals from the Heavily Contaminated Oak Ridge Reservation

Contamination of environments with nitrate generated by industrial processes and the use of nitrogen-containing fertilizers is a growing problem worldwide. While nitrate can be removed from contaminated areas by microbial denitrification, nitrate frequently occurs with other contaminants, such as heavy metals, that have the potential to impede the process. Here, nitrate-reducing microorganisms were enriched and isolated from both groundwater and sediments at the Oak Ridge Reservation (ORR) using concentrations of nitrate and metals (Al, Mn, Fe, Co, Ni, Cu, Cd, and U) similar to those observed in a contaminated environment at ORR. Seven new metal-resistant, nitrate-reducing strains were characterized, and their distribution across both noncontaminated and contaminated areas at ORR was examined. While the seven strains have various pH ranges for growth, carbon source preferences, and degrees of resistance to individual and combinations of metals, all were able to reduce nitrate at similar rates both in the presence and absence of the mixture of metals found in the contaminated ORR environment. Four strains were identified in groundwater samples at different ORR locations by exact 16S RNA sequence variant analysis, and all four were found in both noncontaminated and contaminated areas. By using environmentally relevant metal concentrations, we successfully isolated multiple organisms from both ORR noncontaminated and contaminated environments that are capable of reducing nitrate in the presence of extreme mixed-metal contamination.IMPORTANCE Nitrate contamination is a global issue that affects groundwater quality. In some cases, cocontamination of groundwater with nitrate and mixtures of heavy metals could decrease microbially mediated nitrate removal, thereby increasing the duration of nitrate contamination. Here, we used metal and nitrate concentrations that are present in a contaminated site at the Oak Ridge Reservation to isolate seven metal-resistant strains. All were able to reduce nitrate in the presence of high concentrations of a mixture of heavy metals. Four of seven strains were located in pristine as well as contaminated sites at the Oak Ridge Reservation. Further study of these nitrate-reducing strains will uncover mechanisms of resistance to multiple metals that will increase our understanding of the effect of nitrate and metal contamination on groundwater microbial communities.

Sensitivity to the two peptide bacteriocin plantaricin EF is dependent on CorC, a membrane-bound, magnesium/cobalt efflux protein

Lactic acid bacteria produce a variety of antimicrobial peptides known as bacteriocins. Most bacteriocins are understood to kill sensitive bacteria through receptor‐mediated disruptions. Here, we report on the identification of the Lactobacillus plantarum plantaricin EF (PlnEF) receptor. Spontaneous PlnEF‐resistant mutants of the PlnEF‐indicator strain L. plantarum NCIMB 700965 (LP965) were isolated and confirmed to maintain cellular ATP levels in the presence of PlnEF. Genome comparisons resulted in the identification of a single mutated gene annotated as the membrane‐bound, magnesium/cobalt efflux protein CorC. All isolates contained a valine (V) at position 334 instead of a glycine (G) in a cysteine‐β‐synthase domain at the C‐terminal region of CorC. In silico template‐based modeling of this domain indicated that the mutation resides in a loop between two β‐strands. The relationship between PlnEF, CorC, and metal homeostasis was supported by the finding that PlnEF‐resistance was lost when PlnEF was applied together with high concentrations of Mg²⁺, Co²⁺, Zn²⁺, or Cu²⁺. Lastly, PlnEF sensitivity was increased upon heterologous expression of LP965 corC but not the G334V CorC mutant in the PlnEF‐resistant strain Lactobacillus casei BL23. These results show that PlnEF kills sensitive bacteria by targeting CorC.

Complete genome sequence of Caulobacter flavus RHGG3T, a type species of the genus Caulobacter with plant growth-promoting traits and heavy metal resistance

Caulobacter flavus RHGG3^T, a novel type species in the genus Caulobacter, originally isolated from rhizosphere soil of watermelon (Citrullus lanatus), has the ability to improve the growth of watermelon seedling and tolerate heavy metals. In vitro, C. flavus RHGG3^T was able to solubilize phosphate (80.56 mg L^-1), produce indole-3-acetic acid (IAA) (11.58 mg L^-1) and was resistant to multiple heavy metals (copper, zinc, cadmium, cobalt and lead). Inoculating watermelon with this strain increased shoot and root length by 22.1% and 43.7%, respectively, and the total number of lateral roots by 55.9% compared to non-inoculated watermelon. In this study, we present the complete genome sequence of C. flavus RHGG3^T, which was comprised of a single circular chromosome of 5,659,202 bp with a G + C content of 69.25%. An annotation analysis revealed that the C. flavus RHGG3^T genome contained 5172 coding DNA sequences, 9 rRNA and 55 tRNA genes. Genes related to plant growth promotion (PGP), such as those associated with phosphate solubilization, nitrogen fixation, IAA, phenazine, volatile compounds, spermidine and cobalamin synthesis, were found in the C. flavus RHGG3^T genome. Some genes responsible for heavy metal tolerance were also identified. The genome sequence of strain RHGG3^T reported here provides new insight into the molecular mechanisms underlying the promotion of plant growth and the resistance to heavy metals in C. flavus. This study will be valuable for further exploration of the biotechnological applications of strain RHGG3^T in agriculture.

Resistance to Metals Used in Agricultural Production

Metals and metalloids have been used alongside antibiotics in livestock production for a long time. The potential and acute negative impact on the environment and human health of these livestock feed supplements has prompted lawmakers to ban or discourage the use of some or all of these supplements. This article provides an overview of current use in the European Union and the United States, detected metal resistance determinants, and the proteins and mechanisms responsible for conferring copper and zinc resistance in bacteria. A detailed description of the most common copper and zinc metal resistance determinants is given to illustrate not only the potential danger of coselecting antibiotic resistance genes but also the potential to generate bacterial strains with an increased potential to be pathogenic to humans. For example, the presence of a 20-gene copper pathogenicity island is highlighted since bacteria containing this gene cluster could be readily isolated from copper-fed pigs, and many pathogenic strains, including Escherichia coli O104:H4, contain this potential virulence factor, suggesting a potential link between copper supplements in livestock and the evolution of pathogens.

Mutant phenotypes for thousands of bacterial genes of unknown function

One-third of all protein-coding genes from bacterial genomes cannot be annotated with a function. Here, to investigate the functions of these genes, we present genome-wide mutant fitness data from 32 diverse bacteria across dozens of growth conditions. We identified mutant phenotypes for 11,779 protein-coding genes that had not been annotated with a specific function. Many genes could be associated with a specific condition because the gene affected fitness only in that condition, or with another gene in the same bacterium because they had similar mutant phenotypes. Of the poorly annotated genes, 2,316 had associations that have high confidence because they are conserved in other bacteria. By combining these conserved associations with comparative genomics, we identified putative DNA repair proteins; in addition, we propose specific functions for poorly annotated enzymes and transporters and for uncharacterized protein families. Our study demonstrates the scalability of microbial genetics and its utility for improving gene annotations.

Multiple signaling systems target a core set of transition metal homeostasis genes using similar binding motifs

Bacterial response to metals can require complex regulation. We report an overlapping regulation for copper and zinc resistance genes in the denitrifying bacterium, Pseudomonas stutzeri RCH2, by three two-component regulatory proteins CopR1, CopR2 and CzcR. We conducted genome-wide evaluations to identify gene targets of two paralogous regulators, CopR1 and CopR2, annotated for copper signaling, and compared the results with the gene targets for CzcR, implicated in zinc signaling. We discovered that the CopRs and CzcR have largely common targets, and crossregulate a core set of P. stutzeri copper and zinc responsive genes. We established that this crossregulation is enabled by a conserved binding motif in the upstream regulatory regions of the target genes. The crossregulation is physiologically relevant as these regulators synergistically and antagonistically target multicopper oxidases, metal efflux and sequestration systems. CopR1 and CopR2 upregulate two cop operons encoding copper tolerance genes, while all three regulators downregulate a putative copper chaperone, Psest_1595. CzcR also upregulated the oprD gene and the CzcIABC Zn²⁺ efflux system, while CopR1 and CopR2 downregulated these genes. Our study suggests that crossregulation of copper and zinc homeostasis can be advantageous, and in P. stutzeri this is enabled by shared binding motifs for multiple response regulators.

Mechanisms of Chromium and Uranium Toxicity in Pseudomonas stutzeri RCH2 Grown under Anaerobic Nitrate-Reducing Conditions

Chromium and uranium are highly toxic metals that contaminate many natural environments. We investigated their mechanisms of toxicity under anaerobic conditions using nitrate-reducing Pseudomonas stutzeri RCH2, which was originally isolated from a chromium-contaminated aquifer. A random barcode transposon site sequencing library of RCH2 was grown in the presence of the chromate oxyanion (Cr[VI]O42−) or uranyl oxycation (U[VI]O22+). Strains lacking genes required for a functional nitrate reductase had decreased fitness as both metals interacted with heme-containing enzymes required for the later steps in the denitrification pathway after nitrate is reduced to nitrite. Cr[VI]-resistance also required genes in the homologous recombination and nucleotide excision DNA repair pathways, showing that DNA is a target of Cr[VI] even under anaerobic conditions. The reduced thiol pool was also identified as a target of Cr[VI] toxicity and psest_2088, a gene of previously unknown function, was shown to have a role in the reduction of sulfite to sulfide. U[VI] resistance mechanisms involved exopolysaccharide synthesis and the universal stress protein UspA. As the first genome-wide fitness analysis of Cr[VI] and U[VI] toxicity under anaerobic conditions, this study provides new insight into the impact of Cr[VI] and U[VI] on an environmental isolate from a chromium contaminated site, as well as into the role of a ubiquitous protein, Psest_2088.