Transposition of IS91 does not generate a target duplication

Dissemination of metaldehyde catabolic pathways is driven by mobile genetic elements in Proteobacteria

Bioremediation of metaldehyde from drinking water using metaldehyde-degrading strains has recently emerged as a promising alternative. Whole-genome sequencing was used to obtain full genomes for metaldehyde degraders Acinetobacter calcoaceticus E1 and Sphingobium CMET-H. For the former, the genetic context of the metaldehyde-degrading genes had not been explored, while for the latter, none of the degrading genes themselves had been identified. In A. calcoaceticus E1, IS91 and IS6-family insertion sequences (ISs) were found surrounding the metaldehyde-degrading gene cluster located in plasmid pAME76. This cluster was located in closely-related plasmids and associated to identical ISs in most metaldehyde-degrading β- and γ-Proteobacteria, indicating horizontal gene transfer (HGT). For Sphingobium CMET-H, sequence analysis suggested a phytanoyl-CoA family oxygenase as a metaldehyde-degrading gene candidate due to its close homology to a previously identified metaldehyde-degrading gene known as mahX. Heterologous gene expression in Escherichia coli alongside degradation tests verified its functional significance and the degrading gene homolog was henceforth called mahS. It was found that mahS is hosted within the conjugative plasmid pSM1 and its genetic context suggested a crossover between the metaldehyde and acetoin degradation pathways. Here, specific replicons and ISs responsible for maintaining and dispersing metaldehyde-degrading genes in α, β and γ-Proteobacteria through HGT were identified and described. In addition, a homologous gene implicated in the first step of metaldehyde utilisation in an α-Proteobacteria was uncovered. Insights into specific steps of this possible degradation pathway are provided.

Mobile Carbapenemase Genes in Pseudomonas aeruginosa

Carbapenem-resistant Pseudomonas aeruginosa is one of the major concerns in clinical settings impelling a great challenge to antimicrobial therapy for patients with infections caused by the pathogen. While membrane permeability, together with derepression of the intrinsic beta-lactamase gene, is the global prevailing mechanism of carbapenem resistance in P. aeruginosa, the acquired genes for carbapenemases need special attention because horizontal gene transfer through mobile genetic elements, such as integrons, transposons, plasmids, and integrative and conjugative elements, could accelerate the dissemination of the carbapenem-resistant P. aeruginosa. This review aimed to illustrate epidemiologically the carbapenem resistance in P. aeruginosa, including the resistance rates worldwide and the carbapenemase-encoding genes along with the mobile genetic elements responsible for the horizontal dissemination of the drug resistance determinants. Moreover, the modular mobile elements including the carbapenemase-encoding gene, also known as the P. aeruginosa resistance islands, are scrutinized mostly for their structures.

Presence and Characterization of a Novel cfr-Carrying Tn558 Transposon Derivative in Staphylococcus delphini Isolated From Retail Food

Antimicrobial resistance has become a major public health threat. Food-related Staphylococcus species have received much attention due to their multidrug resistance. The cfr gene associated with multidrug resistance has been consistently detected in food-derived Staphylococcus species. In this retrospective study, we examined the prevalence of cfr-positive Staphylococcus strains isolated from poultry meat in different geographical areas of China from 2011 to 2016. Two cfr-positive Staphylococcus delphini strains were identified from poultry meat in China. Comparative and whole-genome analyses were performed to characterize the genetic features and overall antimicrobial resistance genes in the two S. delphini isolates 245-1 and 2794-1. Whole-genome sequencing showed that they both harbored a novel 20,258-bp cfr-carrying Tn558 transposon derivative on their chromosomes. The Tn558 derivative harbors multiple antimicrobial resistance genes, including the transferable multiresistance gene cfr, chloramphenicol resistance gene fexA, aminoglycoside resistance genes aacA-aphD and aadD, and bleomycin resistance gene ble. Surprisingly, within the Tn558 derivative, an active unconventional circularizable structure containing various resistance genes and a copy of a direct repeat sequence was identified by two-step PCR. Furthermore, core genome phylogenetic analysis revealed that the cfr-positive S. delphini strains were most closely related to S. delphini 14S03313-1 isolated from Japan in 2017 and 14S03319-1 isolated from Switzerland in 2017. This study is the first report of S. delphini harboring a novel cfr-carrying Tn558 derivative isolated from retail food. This finding raises further concerns regarding the potential threat to food safety and public health safety. The occurrence and dissemination of similar cfr-carrying transposons from diverse Staphylococcus species need further surveillance.

Distribution of IS91 family insertion sequences in bacterial genomes: evolutionary implications

IS91 is the prototype element of a family of bacterial insertion sequences that transpose by a rolling-circle mechanism. Although previously considered a rarity among IS elements, many new examples have been identified by sequence analysis of bacterial genomes. In this work we provide a summary of occurrences of IS91-like sequences in the GenBank database, characterise the genetic organisation of adjacent sequences, and analyse IS91 ecological significance under the light of current transposition mechanisms. Interestingly, IS91 family elements were usually found adjacent to pathogenicity- and virulence-related genes. Thus, this might constitute the niche for IS91 and IS91 family elements to play an important role in the dissemination and evolution of virulence and pathogenicity types of genes.

pUB2380: characterization of a ColD-like resistance plasmid

A detailed analysis of the mobilizable, ColE1-like resistance plasmid, pUB2380, is reported. The 8.5-kb genome encodes six (possibly seven) major functions: (1) a ColD-like origin of replication, oriV, with associated replication functions, RNAI and RNAII; (2) a set of active mobilization functions highly homologous to that of ColE1, including the origin of transfer, oriT; (3) a ColE1-like multimer resolution site (cer); (4) a kanamycin-resistance determinant, aph, encoding an aminoglycoside-3'-phosphotransferase type 1; (5) an insertion sequence, IS1294; and (6) two genes, probably cotranscribed, of unknown function(s). The GC content of the various parts of the genome indicates that the plasmid is a hybrid structure assembled from DNA from at least three different sources, of which the replication region, the mobilization functions, and the resistance gene are likely to have originated in the enterobacteriaceae.

IS1294, a DNA element that transposes by RC transposition

IS1294, found on the ColD-like resistance plasmid pUB2380, is IS91-like. It is an active 1.7-kb insertion sequence that lacks terminal inverted repeats, displays insertion-site specificity, and does not generate direct repeats of the target site. The element has one large open reading frame, tnp(1294), encoding a transposase of 351 amino acids, related to members of the REP family of replication proteins used by RC-plasmids of gram-positive bacteria. IS1294 transposes using rolling-circle replication, initiated at one end of the element, oriIS, and terminated at the other, terIS. oriIS and terIS are highly conserved among like IS elements. oriIS resembles the leading strand replication origins of RC-plasmids; terIS resembles a rho-independent transcription terminator. IS1294 mediates not only its own transposition, but also sequences adjacent to terIS. A transposition model for IS1294 and related elements, involving rolling-circle replication and single-strand DNA intermediates, is presented.

The genes for benzene catabolism in Pseudomonas putida ML2 are flanked by two copies of the insertion element IS1489, forming a class-I-type catabolic transposon, Tn5542

Two directly repeated sequences of the IS elements IS1489v1 and IS1489v2 flank the benzene dioxygenase (bedC1C2BA) and the cis-benzene dihydrodiol dehydrogenase (bedD) genes on the catabolic plasmid pHMT112 in Pseudomonas putida ML2, forming a Class-I-type composite transposon, Tn5542. Both IS1489v1 and IS1489v2 contain an identical 1371-bp open reading frame, tnpA, that is preceded by a possible ribosome binding site. The tnpA gene of IS1489v1 is bound by a pair of 40-bp imperfect inverted repeats while that of IS1489v2 is flanked only by the left inverted repeat. The tnpA gene codes for a putative 53-kDa polypeptide of 456 amino acids bearing similarity to transposases encoded on IS elements of P. alcaligenes, P. aeruginosa, P. stutzeri, and Serratia marcescens. The basic nature of the putative TnpA protein with a deduced pI of 8.93 is typical of IS-encoded transposases. Similar to other IS elements, an outward facing promoter was detected at the right end of IS1489v1. Experiments involving the suicide vector, pKNG101, failed to show transposition of Tn5542.

Intramolecular transposition of insertion sequence IS91 results in second-site simple insertions

A series of plasmids carrying an IRL-kan-IRR transposable cassette, in which IRL and IRR are the left- and right-terminal sequences of IS91, have been constructed. These cassettes could be complemented for transposition with similar efficiency when IS91 transposase was provided either in cis or in trans. A total of 87% of IS91 transposition products were simple insertions of the element, while the remaining 13% were plasmid fusions and co-integrates. When transposase expression was induced from an upstream lac promoter, transposition frequency increased approximately 100-fold. An open reading frame (ORF) present upstream of the transposase gene, ORF121, could be involved in target selection, as mutations affecting this ORF were altered in their insertion specificity. Intramolecular rearrangements were analysed by looking at transposition events disrupting a chloramphenicol resistance gene (cat ) located outside the transposable cassette. Plasmid instability resulting from insertion of an extra copy of IRL-kan-IRR within the cat gene was observed; transposition products contained a second copy of the cassette inserted either as a direct or as an inverted repeat. No deletion or inversion of the intervening DNA was observed. These results could be explained as a consequence of intramolecular transposition of IS91 according to a model of rolling-circle transposition.

Recombination of a 3-chlorobenzoate catabolic plasmid from Alcaligenes eutrophus NH9 mediated by direct repeat elements

Alcaligenes eutrophus NH9 was isolated from soil. This strain can utilize 3-chlorobenzoate (3-CB) as a sole source of carbon and energy. Most of the 3-CB-negative segregants had lost one of the plasmids present in the parent strain. The genes for catabolism of 3-CB were located within a 9.2-kb SacI fragment of this plasmid (pENH91). The genes were found to hybridize with genes for components of the modified ortho cleavage pathway from Pseudomonas putida. In one of the 3-CB-negative segregants, the plasmid had undergone the deletion of a segment with a size of about 12.5 kb that covered the catabolic genes. The deletion event seemed to be the result of reciprocal recombination between two highly homologous sequences with sizes of 2.5 kb that were present as a direct repeat at the two ends of the region that included the catabolic genes. Nucleotide sequence analysis of homologous fragments revealed a structure that resembled an insertion sequence and relatedness to IS21. During repeated subculturing of NH9 on liquid media with 3-CB, the culture was taken over by a derivative strain (designated NH9A) in which the degradative plasmid carried a duplicate copy of the 12.5-kb region that contained the catabolic genes. The duplication of these genes seemed again to have been mediated by recombination between the direct repeat sequences.

The very large amplifiable element AUD2 from Streptomyces lividans 66 has insertion sequence-like repeats at its ends

In a spontaneous, chloramphenicol-sensitive (Cms), arginine-auxotrophic (Arg-) mutant of Streptomyces lividans 1326, two amplified DNA sequences were found. One of them was the well-characterized 5.7-kb ADS1 sequence, amplified to about 300 copies per chromosome. The second one was a 92-kb sequence called ADS2. ADS2 encoding the previously isolated mercury resistance genes of S. lividans was amplified to around 20 copies per chromosome. The complete ADS2 sequence was isolated from a genomic library of the mutant S. lividans 1326.32, constructed in the phage vector lambda EMBL4. In addition, the DNA sequences flanking the corresponding amplifiable element called AUD2 in the wild-type strain were isolated by using another genomic library prepared from S. lividans 1326 DNA. Analysis of the ends of AUD2 revealed the presence of an 846-bp sequence on both sides repeated in the same orientation. Each of the direct repeats ended with 18-bp inverted repeated sequences. This insertion sequence-like structure was confirmed by the DNA sequence determined from the amplified copy of the direct repeats which demonstrated a high degree of similarity of 65% identity in nucleic acid sequence to IS112 from Streptomyces albus. The recombination event leading to the amplification of AUD2 occurred within these direct repeats, as shown by DNA sequence analysis. The amplification of AUD2 was correlated with a deletion on one side of the flanking chromosomal region beginning very near or in the amplified DNA. Strains of S. lividans like TK20 and TK21 which are mercury sensitive have completely lost AUD2 together with flanking chromosomal DNA on one or both sides.

Leucine-responsive regulatory protein, IS1 insertions, and the negative regulator FaeA control the expression of the fae (K88) operon in Escherichia coli

Nucleotide sequence analysis of the fae operon encoding the biosynthesis of K88 fimbriae revealed the presence of two divergently transcribed regulatory genes, faeA and faeB, separated by two inverted IS1 insertions. The amino acid sequences of the regulatory proteins FaeA and FaeB show similarity to the primary structure of corresponding regulatory proteins involved in the biosynthesis of Pap and S fimbriae. Expression of faeA is positively controlled by the FaeA protein, whereas K88 fimbriae production is negatively controlled by the co-operative activity of FaeA and the leucine-responsive regulatory protein (Lrp). Exchange of FaeA for Papl, a positive regulator of Pap fimbriae expression, also represses K88 production indicating that the combination Papl/Lrp has opposite effects on fae and pap expression. Mutations in faeB had no effect on the biosynthesis of K88 fimbriae. The presence of the two IS1 insertions is hypothesized to neutralize part of the repression of K88 biosynthesis by FaeA/Lrp. Like pap, the fae operon does not respond to exogenous leucine.

DNA sequence of IS91 and identification of the transposase gene

IS91 is a 1,830-bp insertion sequence that inserts specifically at the sequence CAAG or GAAC of the target and does not duplicate any sequence upon insertion (23). By transposon mutagenesis, we have identified open reading frame 426 (ORF426; bp 454 to 1731) as the putative ORF for the transposase. It displays a cysteine-rich, potential metal-binding domain in its N-terminal region. Adjacent to ORF426, there is an ORF (ORF121) which precedes and terminally overlaps ORF426 by one amino acid. Tn1732 insertions in ORF121 do not affect the transposition frequency. IS91 has sequence similarities to IS801 from Pseudomonas syringae. Their putative transposases are 36% identical, including conservation of the cysteine-rich cluster. The information concerning IS801 insertion specificity and target duplication has been reevaluated in the light of our results.

Identification, distribution, and sequence analysis of new insertion elements in Caulobacter crescentus

We describe two insertion elements isolated from Caulobacter crescentus that are designated IS298 and IS511. These insertion elements were cloned from spontaneous flagellar (fla) gene mutants SC298 and SC511 derived from the wild-type strain CB15 (ATCC 19089), in which they were originally identified as insertions in the flbG operon of the hook gene cluster (N. Ohta, E. Swanson, B. Ely, and A. Newton, J. Bacteriol. 158:897-904, 1984). IS298 and IS511 were each present in C. crescentus CB2 and CB15 in at least four different positions, but neither was present in strain CB13 or in several Caulobacter species examined, including C. vibrioides, C. leidyia, and C. henricii. Nucleotide sequence analysis across the chromosome-insertion element junctions showed that IS298 is located 152 base pairs (bp) upstream from the ATG translation start of the hook protein gene flaK, where it is bounded by a 4-bp direct repeat derived from the site of insertion, and that IS511 is inserted at codon 186 of the flaK coding sequence, where it is also bounded by a 4-bp direct repeat duplicated from the site of insertion. The ilvB102 mutation in strain SC125 was also shown to result from insertion sequence IS511, but no duplication of the genomic sequence was present at the insertion element junctions. IS298 contains an imperfect terminal inverted repeat 16 bp long, and IS511 contains a 32-bp inverted repeat at the termini. IS298 and IS511 are the first insertion elements described in C. crescentus.

Structural and functional analysis of the mini-circle, a transposable element of Streptomyces coelicolor A3(2)

The mini-circle is a transposable element which is present in Streptomyces coelicolor A3(2) in both free circular and chromosomally integrated linear forms. The nucleotide sequences of the mini-circle and its preferred site of integration in the Streptomyces lividans TK64 chromosome were determined. Three putative open reading frames were identified in the mini-circle sequence. The mini-circle does not appear to cause a target site duplication on transposition and does not have perfect terminal inverted repeats. The observed site-specificity of the mini-circle is not mediated by extensive homology between the element and the chromosomal integration site. Transposition of the mini-circle into the S. lividans chromosome was demonstrated and found to be some two orders of magnitude less efficient than integration of the circular form of the element, suggesting that the circular form of the mini-circle might be a normal intermediate in the transposition process.

Specificity of insertion of IS91, an insertion sequence present in alpha-haemolysin plasmids of Escherichia coli

We have determined the DNA sequences of eight different insertions of IS91 in a specifically engineered recipient plasmid of known DNA sequence (pSU300). The sequences at the termini of IS91 are 5'-CGAGTAGG...CCTATCGAT. IS91 inserts specifically 5' to either one of the tetranucleotides 5'-GAAC or 5'-CAAG, and always in the same relative orientation with respect to the sequence of the target. Except in one special case, no duplications of the recipient DNA were produced at the site of insertion.

Nucleotide sequence and characterization of a new insertion element, IS240, from Bacillus thuringiensis israelensis

The nucleotide sequence of two repeated sequences (RS) in opposite orientations flanking the 125-kDa toxin gene of Bacillus thuringiensis israelensis (C. Bourgouin et al., J. Bacteriol. 170, 3575-3583, 1988) is reported in this paper. The analysis of these sequences indicates that these two RS display characteristic features of bacterial insertion sequences (IS) and are therefore referred to as IS240. IS240 B is 865 bp long and has two perfect terminal-inverted repeats of 16 bp; IS240 A is 99% identical to IS240 B. A long open reading frame encoding a polypeptide of 235 amino acids spans almost the entire sequence of both IS240 elements. Both the sequence of the inverted repeats and the putative transposases are homologous to IS26 of Proteus vulgaris, IS15-delta of Salmonella panama, IS431 of Staphylococcus aureus, and ISS1 of Streptococcus lactis.

Genetic analysis of the interaction of the insertion sequence IS903 transposase with its terminal inverted repeats

The insertion sequence IS903 has perfect, 18-base-pair terminal repeats that are the presumed binding sites of its transposase. We have isolated mutations throughout this inverted repeat and analyzed their effect on transposition. We show that every position in the inverted repeat (with the possible exception of position 4) is important for efficient transposition. Furthermore, various substitutions at a single position can have a wide range of effects. Analysis of these hierarchical effects suggests that transposase contacts the minor groove in the region from position 13 to position 16 but makes major groove (or more complex) interactions with the outer portion of the inverted repeat. Our data indicate that the transposase exhibits relaxed specificity for the "second" end of a transposed segment; the defect in transposition of virtually all mutant inverted repeats can be rescued by a wild-type end. However, this rescue exhibits a pronounced position effect; in most cases, it is efficient only when the wild-type end is close to the 3' end of the transposase gene. This confirms the cis-acting nature of the transposase protein and suggests the initial transposase-inverted repeat interaction is the rate-limiting step in transposition. From the behavior of transposons with one mutant and one wild-type end, we infer that the inverted repeat contains two functional domains--one for initial complex formation with transposase and the other for effective completion of transpositional recombination. To support this hypothesis we show that an end with a mutation in one domain can significantly rescue an end with a mutation in the other domain.