Role of the parCBA operon of the broad-host-range plasmid RK2 in stable plasmid maintenance

Engineering Plasmids with Synthetic Origins of Replication

Plasmids remain by far the most common medium for delivering engineered DNA to microorganisms. However, the reliance on natural plasmid replication mechanisms limits their tunability, compatibility, and modularity. Here we refactor the natural pMB1 origin and create plasmids with customizable copy numbers by tuning refactored components. We then create compatible origins that use synthetic RNA regulators to implement independent copy control. We further demonstrate that the synthetic origin of replication (SynORI) can be engineered modularly to respond to various signals, allowing for multiplexed copy-based reporting of environmental signals. Lastly, a library of 6 orthogonal SynORI plasmids is created and co-maintained in E. coli for a week. This work establishes the feasibility of creating plasmids with SynORI that can serve as a new biotechnology for synthetic biology.

Competition in the Phaseolus vulgaris-Rhizobium symbiosis and the role of resident soil rhizobia in determining the outcomes of inoculation

Background and Aims

Inoculation of legumes with effective N2-fixing rhizobia is a common practice to improve farming profitability and sustainability. To succeed, inoculant rhizobia must overcome competition for nodulation by resident soil rhizobia that fix N2 ineffectively. In Kenya, where Phaseolus vulgaris (common bean) is inoculated with highly effective Rhizobium tropici CIAT899 from Colombia, response to inoculation is low, possibly due to competition from ineffective resident soil rhizobia. Here, we evaluate the competitiveness of CIAT899 against diverse rhizobia isolated from cultivated Kenyan P. vulgaris.

Methods

The ability of 28 Kenyan P. vulgaris strains to nodulate this host when co-inoculated with CIAT899 was assessed. Rhizosphere competence of a subset of strains and the ability of seed inoculated CIAT899 to nodulate P. vulgaris when sown into soil with pre-existing populations of rhizobia was analyzed.

Results

Competitiveness varied widely, with only 27% of the test strains more competitive than CIAT899 at nodulating P. vulgaris. While competitiveness did not correlate with symbiotic effectiveness, five strains were competitive against CIAT899 and symbiotically effective. In contrast, rhizosphere competence strongly correlated with competitiveness. Soil rhizobia had a position-dependent numerical advantage, outcompeting seed-inoculated CIAT899 for nodulation of P. vulgaris, unless the resident strain was poorly competitive.

Conclusion

Suboptimally effective rhizobia can outcompete CIAT899 for nodulation of P. vulgaris. If these strains are widespread in Kenyan soils, they may largely explain the poor response to inoculation. The five competitive and effective strains characterized here are candidates for inoculant development and may prove better adapted to Kenyan conditions than CIAT899.

Genetic Circuit Design in Rhizobacteria

Genetically engineered plants hold enormous promise for tackling global food security and agricultural sustainability challenges. However, construction of plant-based genetic circuitry is constrained by a lack of well-characterized genetic parts and circuit design rules. In contrast, advances in bacterial synthetic biology have yielded a wealth of sensors, actuators, and other tools that can be used to build bacterial circuitry. As root-colonizing bacteria (rhizobacteria) exert substantial influence over plant health and growth, genetic circuit design in these microorganisms can be used to indirectly engineer plants and accelerate the design-build-test-learn cycle. Here, we outline genetic parts and best practices for designing rhizobacterial circuits, with an emphasis on sensors, actuators, and chassis species that can be used to monitor/control rhizosphere and plant processes.

Investigation of the robustness of Cupriavidus necator engineered strains during fed-batch cultures

It is of major interest to ensure stable and performant microbial bioprocesses, therefore maintaining high strain robustness is one of the major future challenges in industrial microbiology. Strain robustness can be defined as the persistence of genotypic and/or phenotypic traits in a system. In this work, robustness of an engineered strain is defined as plasmid expression stability, cultivability, membrane integrity and macroscopic cell behavior and was assessed in response to implementations of sugar feeding strategies (pulses and continuous) and two plasmid stabilization systems (kanamycin resistance and Post-Segregational Killing hok/sok). Fed-batch bioreactor cultures, relevant mode to reach high cell densities and higher cell generation number, were implemented to investigate the robustness of C. necator engineered strains. Host cells bore a recombinant plasmid encoding for a plasmid expression level monitoring system, based on eGFP fluorescence quantified by flow cytometry. We first showed that well-controlled continuous feeding in comparison to a pulse-based feeding allowed a better carbon use for protein synthesis (avoiding organic acid excretion), a lower heterogeneity of the plasmid expression and a lower cell permeabilization. Moreover, the plasmid stabilization system Post-Segregational Killing hok/sok, an autonomous system independent on external addition of compounds, showed the best ability to maintain plasmid expression level stability insuring a greater population homogeneity in the culture. Therefore, in the case of engineered C. necator, the PSK system hok/sok appears to be a relevant and an efficient alternative to antibiotic resistance system for selection pressure, especially, in the case of bioprocess development for economic and environmental reasons.

Precision design of stable genetic circuits carried in highly-insulated E. coli genomic landing pads

Genetic circuits have many applications, from guiding living therapeutics to ordering process in a bioreactor, but to be useful they have to be genetically stable and not hinder the host. Encoding circuits in the genome reduces burden, but this decreases performance and can interfere with native transcription. We have designed genomic landing pads in Escherichia coli at high-expression sites, flanked by ultrastrong double terminators. DNA payloads >8 kb are targeted to the landing pads using phage integrases. One landing pad is dedicated to carrying a sensor array, and two are used to carry genetic circuits. NOT/NOR gates based on repressors are optimized for the genome and characterized in the landing pads. These data are used, in conjunction with design automation software (Cello 2.0), to design circuits that perform quantitatively as predicted. These circuits require fourfold less RNA polymerase than when carried on a plasmid and are stable for weeks in a recA+ strain without selection. This approach enables the design of synthetic regulatory networks to guide cells in environments or for applications where plasmid use is infeasible.

Insight Into the Diversity and Possible Role of Plasmids in the Adaptation of Psychrotolerant and Metalotolerant Arthrobacter spp. to Extreme Antarctic Environments

Arthrobacter spp. are coryneform Gram-positive aerobic bacteria, belonging to the class Actinobacteria. Representatives of this genus have mainly been isolated from soil, mud, sludge or sewage, and are usually mesophiles. In recent years, the presence of Arthrobacter spp. was also confirmed in various extreme, including permanently cold, environments. In this study, 36 psychrotolerant and metalotolerant Arthrobacter strains isolated from petroleum-contaminated soil from the King George Island (Antarctica), were screened for the presence of plasmids. The identified replicons were thoroughly characterized in order to assess their diversity and role in the adaptation of Arthrobacter spp. to harsh Antarctic conditions. The screening process identified 11 different plasmids, ranging in size from 8.4 to 90.6 kb. A thorough genomic analysis of these replicons detected the presence of numerous genes encoding proteins that potentially perform roles in adaptive processes such as (i) protection against ultraviolet (UV) radiation, (ii) resistance to heavy metals, (iii) transport and metabolism of organic compounds, (iv) sulfur metabolism, and (v) protection against exogenous DNA. Moreover, 10 of the plasmids carry genetic modules enabling conjugal transfer, which may facilitate their spread among bacteria in Antarctic soil. In addition, transposable elements were identified within the analyzed plasmids. Some of these elements carry passenger genes, which suggests that these replicons may be actively changing, and novel genetic modules of adaptive value could be acquired by transposition events. A comparative genomic analysis of plasmids identified in this study and other available Arthrobacter plasmids was performed. This showed only limited similarities between plasmids of Antarctic Arthrobacter strains and replicons of other, mostly mesophilic, isolates. This indicates that the plasmids identified in this study are novel and unique replicons. In addition, a thorough meta-analysis of 247 plasmids of psychrotolerant bacteria was performed, revealing the important role of these replicons in the adaptation of their hosts to extreme environments.

CRISPR-Cas systems preferentially target the leading regions of MOBF conjugative plasmids

Most prokaryotes contain CRISPR-Cas immune systems that provide protection against mobile genetic elements. We have focused on the ability of CRISPR-Cas to block plasmid conjugation, and analyzed the position of target sequences (protospacers) on conjugative plasmids. The analysis reveals that protospacers are non-uniformly distributed over plasmid regions in a pattern that is determined by the plasmid's mobilization type (MOB). While MOBP plasmids are most frequently targeted in the region entering the recipient cell last (lagging region), MOBF plasmids are mostly targeted in the region entering the recipient cell first (leading region). To explain this protospacer distribution bias, we propose two mutually non-exclusive hypotheses: (1) spacers are acquired more frequently from either the leading or lagging region depending on the MOB type (2) CRISPR-interference is more efficient when spacers target these preferred regions. To test the latter hypothesis, we analyzed Type I-E CRISPR-interference against MOBF prototype plasmid F in Escherichia coli. Our results show that plasmid conjugation is effectively inhibited, but the level of immunity is not affected by targeting the plasmid in the leading or lagging region. Moreover, CRISPR-immunity levels do not depend on whether the incoming single-stranded plasmid DNA, or the DNA strand synthesized in the recipient is targeted. Our findings indicate that single-stranded DNA may not be a target for Type I-E CRISPR-Cas systems, and suggest that the protospacer distribution bias might be due to spacer acquisition preferences.

Introduction of a plasmid-encoded phoA gene for constitutive overproduction of alkaline phosphatase in three subsurface Pseudomonas isolates

Abstract Three bacterial isolates, Pseudomonas fluorescens F1, Pseudomonas rhodesiae R1 and Pseudomonas veronii V1 were genetically modified by introduction of a plasmid, pJH123, with a phoA hybrid gene that directed constitutive overproduction of the enzyme alkaline phosphatase. The presence of the plasmid in the bacterial hosts elevated extracytoplasmic alkaline phosphatase production from 100- to 820-fold. The growth and survival of the plasmid-bearing hosts in sterilized soil slurries was comparable to parental control strains. In the absence of antibiotic selection, pJH123 was maintained in two of the three hosts (P. fluorescens F1 and P. veronii V1) during incubation in minimal medium. The effects of the genetically enhanced pseudomonads on the liberation of inorganic phosphate (PO(4) (3-)) were determined in sterilized soil slurries following the addition of an organophosphorus compound, glycerol-3-phosphate. A significant accumulation of PO(4) (3-) was measured in soil slurries amended with 10 mM glycerol-3-phosphate and any of the three phosphatase-enhanced pseudomonad isolates. In contrast, soil slurries containing unmodified parental strains did not exhibit significant PO(4) (3-) accumulation. Two of the three enhanced phosphate-liberating strains released sufficient PO(4) (3-) that cell-free supernatants from sterilized soil slurry incubations removed significant amounts of uranium (as much as 69%) from solution.

Prevalence and significance of plasmid maintenance functions in the virulence plasmids of pathogenic bacteria

Virulence functions of pathogenic bacteria are often encoded on large extrachromosomal plasmids. These plasmids are maintained at low copy number to reduce the metabolic burden on their host. Low-copy-number plasmids risk loss during cell division. This is countered by plasmid-encoded systems that ensure that each cell receives at least one plasmid copy. Plasmid replication and recombination can produce plasmid multimers that hinder plasmid segregation. These are removed by multimer resolution systems. Equitable distribution of the resulting monomers to daughter cells is ensured by plasmid partition systems that actively segregate plasmid copies to daughter cells in a process akin to mitosis in higher organisms. Any plasmid-free cells that still arise due to occasional failures of replication, multimer resolution, or partition are eliminated by plasmid-encoded postsegregational killing systems. Here we argue that all of these three systems are essential for the stable maintenance of large low-copy-number plasmids. Thus, they should be found on all large virulence plasmids. Where available, well-annotated sequences of virulence plasmids confirm this. Indeed, virulence plasmids often appear to contain more than one example conforming to each of the three system classes. Since these systems are essential for virulence, they can be regarded as ubiquitous virulence factors. As such, they should be informative in the search for new antibacterial agents and drug targets.

Dynamics of the IncW genetic backbone imply general trends in conjugative plasmid evolution

Plasmids cannot be understood as mere tools for genetic exchange: they are themselves subject to the forces of evolution. Their genomic and phylogenetic features have been less studied in this respect. Focusing on the IncW incompatibility group, which includes the smallest known conjugative plasmids, we attempt to unveil some common trends in plasmid evolution. The functional modules of IncW genetic backbone are described, with emphasis on their architecture and relationships to other plasmid groups. Some plasmid regions exhibit strong phylogenetic mosaicism, in striking contrast to others of unusual synteny conservation. The presence of genes of unknown function that are widely distributed in plasmid genomes is also emphasized, exposing the existence of ill-defined yet conserved plasmid functions. Conjugation is an essential hallmark of IncW plasmid biology and special attention is given to the organization and evolution of its transfer modules. Genetic exchange between plasmids and their hosts is analysed by following the evolution of the type IV secretion system. Adaptation of the trw conjugative machinery to pathogenicity functions in Bartonella is discussed as an example of how plasmids can change their host modus vivendi. Starting from the phage paradigm, our analysis articulates novel concepts that apply to plasmid evolution.

The kfrA gene is the first in a tricistronic operon required for survival of IncP-1 plasmid R751

The kfrA gene of the IncP-1 broad-host-range plasmids is the best-studied member of a growing gene family that shows strong linkage to the minimal replicon of many low-copy-number plasmids. KfrA is a DNA binding protein with a long, alpha-helical, coiled-coil tail. Studying IncP-1beta plasmid R751, evidence is presented that kfrA and its downstream genes upf54.8 and upf54.4 were organized in a tricistronic operon (renamed here kfrA kfrB kfrC), expressed from autoregulated kfrAp, that was also repressed by KorA and KorB. KfrA, KfrB and KfrC interacted and may have formed a multi-protein complex. Inactivation of either kfrA or kfrB in R751 resulted in long-term accumulation of plasmid-negative bacteria, whereas wild-type R751 itself persisted without selection. Immunofluorescence studies showed that KfrA(R751) formed plasmid-associated foci, and deletion of the C terminus of KfrA caused plasmid R751DeltaC2kfrA foci to disperse and mislocalize. Thus, the KfrABC complex may be an important component in the organization and control of the plasmid clusters that seem to form the segregating unit in bacterial cells. The studied operon is therefore part of the set of functions needed for R751 to function as an efficient vehicle for maintenance and spread of genes in Gram-negative bacteria.

Studying plasmid horizontal transfer in situ: a critical review

This review deals with the prospective, experimental documentation of horizontal gene transfer (HGT) and its role in real-time, local adaptation. We have focused on plasmids and their function as an accessory and/or adaptive gene pool. Studies of the extent of HGT in natural environments have identified certain hot spots, and many of these involve biofilms. Biofilms are uniquely suited for HGT, as they sustain high bacterial density and metabolic activity, even in the harshest environments. Single-cell detection of donor, recipient and transconjugant bacteria in various natural environments, combined with individual-based mathematical models, has provided a new platform for HGT studies.

Analysis of macrolide-lincosamide-streptogramin B (MLS(B)) resistance determinant in strains of Clostridium difficile

The macrolide-lincosamide-streptogramin B (MLSB) resistance determinants have been detected among Clostridia in both C. perfringens and C. difficile strains. Previous studies have shown that MLSB-resistant C. difficile strains can be differentiated by specific hybridizing bands using an erm(B) probe. A recent study has demonstrated that C. difficile 630, a strain highly resistant to clindamycin and erythromycin (MIC > or = 256 ml/L), showing a hybridizing band at 9.7 kb, contains two copies of an erm(B) gene. It was also hypothesized that C. difficile 630 erm(B) determinant has arisen from a progenitor, represented by the C. perfringens CP592 determinant, which contains only one copy of an erm(B) gene that differs from C. difficile 630 erm(B) for seven nucleotide substitutions. To investigate the possibility that C. difficile strains with hybridizing fragments of different molecular size have an erm(B) determinant not identical to the one described in C. difficile 630, we performed a genetic analysis on the erm(B) determinant in 18 C. difficile strains, isolated from different sources. The results showed a heterogeneity in erm(B) determinant: C. difficile strains with hybridizing bands at 7.3 or 3.7 kb contained only one erm(B) copy, whereas strains with a band at 9.7 kb had two copies. The majority of the toxigenic strains examined was characterized by only one erm(B) copy with a sequence identical to the one found in C. difficile 630 and a lower resistance level for erythromycin (MICs ranging from 16 to 24 ml/L). Differently, some strains had an erm(B) gene identical to the one found in C. perfringens CP592. PCR ribotyping and clustering analysis indicate that the examined resistant strains, except one, belong to the same genetic lineage. These results seem to support the hypothesis of the evolution of the C. difficile 630 erm(B) determinant. The functional significance of one or two copies of erm(B) gene in C. difficile strains should be further investigated.

ParE toxin encoded by the broad-host-range plasmid RK2 is an inhibitor of Escherichia coli gyrase

Broad-host-range plasmid RK2 encodes a post-segregational killing system, parDE, which contributes to the stable maintenance of this plasmid in Escherichia coli and many distantly related bacteria. The ParE protein is a toxin that inhibits cell growth, causes cell filamentation and eventually cell death. The ParD protein is a specific ParE antitoxin. In this work, the in vitro activities of these two proteins were examined. The ParE protein was found to inhibit DNA synthesis using an E. coli oriC supercoiled template and a replication-proficient E. coli extract. Moreover, ParE inhibited the early stages of both chromosomal and plasmid DNA replication, as measured by the DnaB helicase- and gyrase-dependent formation of FI*, a highly unwound form of supercoiled DNA. The presence of ParD prevented these inhibitory activities of ParE. We also observed that the addition of ParE to supercoiled DNA plus gyrase alone resulted in the formation of a cleavable gyrase-DNA complex that was converted to a linear DNA form upon addition of sodium dodecyl sulphate (SDS). Adding ParD before or after the addition of ParE prevented the formation of this cleavable complex. These results demonstrate that the target of ParE toxin activity in vitro is E. coli gyrase.

Genomic analysis of the erythromycin resistance element Tn5398 from Clostridium difficile

Clostridium difficile is a nosocomial pathogen that causes a range of chronic intestinal diseases, usually as a result of antimicrobial therapy. Macrolide-lincosamide-streptogramin B (MLS) resistance in C. difficile is encoded by the Erm B resistance determinant, which is thought to be located on a conjugative transposon, Tn5398. The 9630 bp Tn5398 element has been cloned and completely sequenced and its insertion site determined. Analysis of the resultant data reveals that Tn5398 is not a classical conjugative transposon but appears to be a mobilizable non-conjugative element. It does not carry any transposase or site-specific recombinase genes, nor any genes likely to be involved in conjugation. Furthermore, using PCR analysis it has been shown that isolates of C. difficile obtained from different geographical locations exhibit heterogeneity in the genetic arrangement of both Tn5398 and their Erm B determinants. These results indicate that genetic exchange and recombination between these determinants occurs in the clinical and natural environment.

Molecular analysis of the pRA2 partitioning region: ParB autoregulates parAB transcription and forms a nucleoprotein complex with the plasmid partition site, parS

The partitioning locus (par) of plasmid pRA2 belongs to a recently discovered subgroup of plasmid partitioning systems that are evolutionarily distinct from the P1, F and R1/NR1 prototypes. The pRA2 par region was effective in stabilizing both pRA2 and F mini-replicons. Analysis of the nucleotide sequence revealed three potential coding regions that were designated parA, parB and parC. Through mutagenesis, parA and parB were found to be essential for partitioning function, whereas parC did not appear to be required. Using transcriptional reporter systems, it was demonstrated in vivo that ParB repressed par promoter activity by 60-fold and that ParA had little effect on transcriptional activity. Primer extension analysis revealed that the par transcriptional start point was located 47 nucleotides upstream of the parA translational start codon. Based on this information, putative -10 and -35 transcriptional signals were identified, and their subsequent deletion resulted in a dramatic reduction in promoter activity. The par promoter region was also demonstrated to exert incompatibility towards a plasmid with an active pRA2 par system. Nested deletions in this region allowed the incompatibility determinant, designated parS, to be localized. Recombinant ParA and ParB proteins were overexpressed and purified by affinity chromatography. Through in vitro binding experiments, purified ParB was shown to interact specifically with the par promoter region. DNase I footprinting revealed that ParB not only binds to the conserved sequence 5'-TCA AA(T/C) (G/C)CT CAA (A/T)A, which is present in three copies in the par promoter region, but also binds to the pRA2 partitioning site, parS. It appears that ParB has a dual role in pRA2 partitioning, being responsible for both the regulation of par transcription and the formation of a partition nucleoprotein complex at parS.

A small protein-protein interaction domain common to KlcB and global regulators KorA and TrbA of promiscuous IncP plasmids

The kor regulon of broad host-range, incompatibility group P (IncP) plasmids uses the KorA, KorB, and KorC repressors to regulate expression of genes for replication, conjugation, segregation, and host range. One operon, kilC, encodes the KorC repressor and two genes of unknown function (klcA and klcB). The predicted sequences of the 51.1 kDa KlcB protein, the 11.3 kDa KorA repressor, and another small (13.5 kDa) regulatory protein, TrbA, show a highly related 35 amino acid residue segment (V-L-P domain). We found that induction of the klcB gene is toxic to Escherichia coli host cells harboring an IncP plasmid. We confirmed a model in which the V-L-P domain of KlcB interacts directly with the V-L-P domain of KorA to derepress KorA-regulated operons, thereby allowing expression of toxic genes. First, a lacZ reporter fused to the kleA promoter, which is regulated by KorA and KorC, revealed that klcB induction specifically releases KorA-repression but has no effect on KorC repression. Second, induced expression of the V-L-P domains from KorA or KlcB is sufficient to release KorA-repression at the kleA promoter. Third, purified GST-KlcB fusion protein interacts specifically with His-tagged KorA. Fourth, fusion of the V-L-P domains of KorA and TrbA and full-length KlcB polypeptide to the DNA-binding domain of bacteriophage lambda repressor leads to the formation of functional, dimeric repressors, and mutations that alter conserved residues of the V-L-P domain adversely affect dimerization. Fifth, crosslinking experiments demonstrated that the V-L-P domain of KorA is able to dimerize in solution and form heterodimers in mixtures with full-length KorA polypeptide. These findings show that the V-L-P domain is a protein-protein interaction module that is likely to be responsible for dimerization of KorA and TrbA, and important for KlcB dimerization. We speculate on the possible significance of KlcB-KorA heterodimers in IncP plasmid maintenance.

Stable RK2-derived cloning vectors for the analysis of gene expression and gene function in gram-negative bacteria

The construction of several stable RK2-derived cloning vectors for the analysis of gene expression and function in gram-negative bacteria is reported. Plasmid stability is conferred by the RK2 par locus or by insertion of the spsAB or spsCD symbiotic plasmid stability loci from pNGR234a of Rhizobium sp. NGR234. The vectors carry multiple cloning sites with protection against read-through transcriptional activity of vector sequences. Vector derivatives with the constitutive nptII promoter or a promoterless gusA gene are suitable for the study of gene function or regulation in bacteria.

Incompatibility protein IncC and global regulator KorB interact in active partition of promiscuous plasmid RK2

Replication of the broad-host-range, IncPalpha plasmid RK2 requires two plasmid loci: trfA, the replication initiator gene, and oriV, the origin of replication. While these determinants are sufficient for replication in a wide variety of bacteria, they do not confer the stable maintenance of parental RK2 observed in its hosts. The product of the incC gene has been proposed to function in the stable maintenance of RK2 because of its relatedness to the ParA family of ATPases, some of which are known to be involved in the active partition of plasmid and chromosomal DNA. Here we show that IncC has the properties expected of a component of an active partition system. The smaller polypeptide product of incC (IncC2) exhibits a strong, replicon-independent incompatibility phenotype with RK2. This incompatibility phenotype requires the global transcriptional repressor, KorB, and the target for incC-mediated incompatibility is a KorB-binding site (O(B)). We found that KorB and IncC interact in vivo by using the yeast two-hybrid system and in vitro by using partially purified proteins. Elevated expression of the incC and korB genes individually has no obvious effect on Escherichia coli cell growth, but their simultaneous overexpression is toxic, indicating a possible interaction of IncC-KorB complexes with a vital host target. A region of RK2 bearing incC, korB, and multiple KorB-binding sites is able to stabilize an unstable, heterologous plasmid in an incC-dependent manner. Finally, elevated levels of IncC2 cause RK2 to aggregate, indicating a possible role for IncC in plasmid pairing. These findings demonstrate that IncC, KorB, and at least one KorB-binding site are components of an active partition system for the promiscuous plasmid RK2.

The macrolide-lincosamide-streptogramin B resistance determinant from Clostridium difficile 630 contains two erm(B) genes

The ErmB macrolide-lincosamide-streptogramin B (MLS) resistance determinant from Clostridium difficile 630 contains two copies of an erm(B) gene, separated by a 1.34-kb direct repeat also found in an Erm(B) determinant from Clostridium perfringens. In addition, both erm(B) genes are flanked by variants of the direct repeat sequence. This genetic arrangement is novel for an ErmB MLS resistance determinant.

Characterization of the endogenous plasmid from Pseudomonas alcaligenes NCIB 9867: DNA sequence and mechanism of transfer

The endogenous plasmid pRA2 from Pseudomonas alcaligenes NCIB 9867 was determined to have 32,743 bp with a G+C content of 59.8%. Sequence analysis predicted a total of 29 open reading frames, with approximately half of them contributing towards the functions of plasmid replication, mobilization, and stability. The Pac25I restriction-modification system and two mobile elements, Tn5563 and IS1633, were physically localized. An additional eight open reading frames with unknown functions were also detected. pRA2 was genetically tagged with the OmegaStr(r)/Spc(r) gene cassette by homologous recombination. Intrastrain transfer of pRA2-encoded genetic markers between isogenic mutants of P. alcaligenes NCIB 9867 were observed at high frequencies (2.4 x 10(-4) per donor). This transfer was determined to be mediated by a natural transformation process that required cell-cell contact and was completely sensitive to DNase I (1 mg/ml). Efficient transformation was also observed when pRA2 DNA was applied directly onto the cells, while transformation with foreign plasmid DNAs was not observed. pRA2 could be conjugally transferred into Pseudomonas putida RA713 and KT2440 recipients only when plasmid RK2/RP4 transfer functions were provided in trans. Plasmid stability analysis demonstrated that pRA2 could be stably maintained in its original host, P. alcaligenes NCIB 9867, as well as in P. putida RA713 after 100 generations of nonselective growth. Disruption of the pRA2 pac25I restriction endonuclease gene did not alter plasmid stability, while the pRA2 minireplicon exhibited only partial stability. This indicates that other pRA2-encoded determinants could have significant roles in influencing plasmid stability.

Plasmid RK2 ParB protein: purification and nuclease properties

The parCBA operon of the 3.2-kb stabilization region of plasmid RK2 encodes three cotranslated proteins. ParA mediates site-specific recombination to resolve plasmid multimers, ParB has been shown to be a nuclease, and the function of ParC is unknown. In this study ParB was overexpressed by cotranslation with ParC in Escherichia coli by using a plasmid construct that contained the parC and parB genes under the control of the T7 promoter. Purification was achieved by treatment of extracts with Polymin P, followed by ammonium sulfate precipitation and heparin and ion-exchange chromatography. Sizing-column analysis indicated that ParB exists as a monomer in solution. Analysis of the enzymatic properties of purified ParB indicated that the protein preferentially cleaves single-stranded DNA. ParB also nicks supercoiled plasmid DNA preferably at sites with potential single-stranded character, like AT-rich regions and sequences that can form cruciform structures. ParB also exhibits 5'-->3' exonuclease activity. This ParB activity on a 5'-end-labeled, double-stranded DNA substrate produces a 3', 5'-phosphorylated dinucleotide which is further cleaved to a 3', 5'-phosphorylated mononucleotide. The role of the ParB endonuclease and exonuclease activities in plasmid RK2 stabilization remains to be determined.