Initiation of germination and inactivation of Bacillus pumilus spores by hydrostatic pressure

Bacillus spore germination at moderate high pressure: A review on underlying mechanisms, influencing factors, and its comparison with nutrient germination

Spore-forming bacteria are resistant to stress conditions owing to their ability to form highly resistant dormant spores. These spores can survive adverse environmental conditions in nature, as well as decontamination processes in the food and related industries. Bacterial spores may return to their vegetative state through a process called germination. As spore germination is critical for the loss of resistance, outgrowth, and development of pathogenicity and spoilage potential, the germination pathway has piqued the interest of the scientific community. The inhibition and induction of germination have critical applications in the food industry. Targeted germination can aid in decreasing the resistance of spores and allow the application of milder inactivation procedures. This germination-inactivation strategy allows better maintenance of important food quality attributes. Different stimuli are reported to trigger germination. Among those, isostatic high pressure (HP) has gained increasing attention due to its potential applications in industrial processes. However, pressure-mediated spore germination is extremely heterogeneous as some spores germinate rapidly, while others exhibit slow germination or do not undergo germination at all. The successful and safe implementation of the germination-inactivation strategy, however, depends on the germination of all spores. Therefore, there is a need to elucidate the mechanisms of HP-mediated germination. This work aimed to critically review the current state of knowledge on Bacillus spore germination at a moderate HP of 50-300 MPa. In this review, the germination mechanism, heterogeneity, and influencing factors have been outlined along with knowledge gaps.

Effects of High Pressure on Bacillus licheniformis Spore Germination and Inactivation

Bacillus and Clostridium species form spores, which pose a challenge to the food industry due to their ubiquitous nature and extreme resistance. Pressurization at <300 MPa triggers spore germination by activating germination receptors (GRs), while pressurization at >300 MPa likely triggers germination by opening dipicolinic acid (DPA) channels present in the inner membrane of the spores. In this work, we expose spores of Bacillus licheniformis, a species associated with food spoilage and occasionally with food poisoning, to high pressure (HP) for holding times of up to 2 h. By using mutant spores lacking one or several GRs, we dissect the roles of the GerA, Ynd, and GerK GRs in moderately HP (mHP; 150 MPa)-induced spore germination. We show that Ynd alone is sufficient for efficient mHP-induced spore germination. GerK also triggers germination with mHP, although at a reduced germination rate compared to that of Ynd. GerA stimulates mHP-induced germination but only in the presence of either the intact GerK or Ynd GR. These results suggests that the effectiveness of the individual GRs in mHP-induced germination differs from their effectiveness in nutrient-induced germination, where GerA plays an essential role. In contrast to Bacillus subtilis spores, treatment with very HP (vHP) of 550 MPa at 37°C did not promote effective germination of B. licheniformis spores. However, treatment with vHP in combination with elevated temperatures (60°C) gave a synergistic effect on spore germination and inactivation. Together, these results provide novel insights into how HP affects B. licheniformis spore germination and inactivation and the role of individual GRs in this process.IMPORTANCE Bacterial spores are inherently resistant to food-processing regimes, such as high-temperature short-time pasteurization, and may therefore compromise food durability and safety. The induction of spore germination facilitates subsequent inactivation by gentler processing conditions that maintain the sensory and nutritional qualities of the food. High-pressure (HP) processing is a nonthermal food-processing technology used to eliminate microbes from food. The application of this technology for spore eradication in the food industry requires a better understanding of how HP affects the spores of different bacterial species. The present study provides novel insights into how HP affects Bacillus licheniformis spores, a species associated with food spoilage and occasionally food poisoning. We describe the roles of different germination receptors in HP-induced germination and the effects of two different pressure levels on the germination and inactivation of spores. This study will potentially contribute to the effort to implement HP technology for spore inactivation in the food industry.

Effect of static magnetic field on endospore germination

This work investigated the effect of static magnetic field (SMF) on Bacillus atrophaeus endospore germination. Germination was triggered by L-alanine in 1.3-T SMF and characterized by ion release, Ca²⁺ -dipicolinic acid release, and water influx. These events were monitored by electrical conductivity, Tb-DPA fluorescence, and optical density, respectively. Culturability of endospore germinated in SMF exposure was evaluated by CFU enumeration. Results indicated that 1.3-T SMF failed to significantly affect endospore germination and culturability, suggesting that the three aforementioned processes were not sensitive to SMF. Bioelectromagnetics. 38:121-127, 2017. © 2016 Wiley Periodicals, Inc.

Review : High-pressure, microbial inactivation and food preservation

High pressure (1 to 10 kbars, i.e. 100-1000 MPa) affects biological constituents and systems. Several physicochemical properties of water are modified, such as the density, the ionic dissociation (and pH), and the melting point of ice. Pressure-induced unfolding, aggregation, and gelation of food proteins mainly depend on the effects of pressure on various noncovalent bonds and interactions. Enzyme inactivation (e.g., of ATPases) also results from similar effects, but some enzymes, including oxidative enzymes from fruits and vegetables, are strongly baroresistant. Chemical reactions, macromolecular transconformations, changes in membrane structure, or changes in crystal form and melting point that are accompanied by a decrease in volume are enhanced under pressure (and vice versa). Several of these phenomena, still poorly identified, are involved in the high inactivation ratio (5–6 logarithmic cycles) of most vegetative microbial cells: gram-negative bacteria, yeasts, complex viruses, molds, and gram-positive bacteria, in this decreasing order of sensitivity to pressure. Much variability is noted in the baroresistance of microorganisms, even within one single species or genus. Other parameters influence this resistance: pressure level, holding time (a two-phase kinetics of inactivation is often observed that prevents the calculation of decimal reduction times), temperature of pressure processing (temperatures above 50°C or between –30 and +5°C enhancing inactivation), composition of the medium or of the food (the pH having apparently little influence, but high salt or sugar concentrations, and low water contents, exerting very strong baroprotective effects).

Taking into account the baroprotective effects of some food constituents and the strong resistance of some microbial strains, recent research aims at combined processes in which high pressure is associated with moderate temperature, CO2, other bacteriostatic agents, or to nonthermal physical processes such as ultrasounds, alternative currents, high-voltage electric pulses, and so forth. The safety and refrigerated shelf life of pressurized foods could be maintained or extended, while the sensorial quality should improve due to the reduced severity of thermal processing. Further research is, however, needed for the regulatory authorities to assess and accept these novel foods and processes.

Inactivación de formas esporuladas de Bacillus subtilis mediante campos eléctricos pulsantes de alta intensidad en combinacion con otras tecnicas de conservacion de alimentos/Inactivation of Bacillus subtilis spores using high intensity pulsed electric fields in combination with other food conservation technologies

The inactivation of Bacillus subtilis spores using high intensity pulsed electric fields (HIPEF) was investigated. Spores were not inactivated when HIPEF treatment (60 kV/cm, 75 pulses) was used alone. The combination of-HIPEF and moderate temperatures around 60°C, and/or the activation of spore suspension prior to HIPEF treatment, and/or the use of up to 5000 IU/ml lysozyme, did not inactivate spores. High hydrostatic pressure (1500 atm, 30 min, 40°C) resulted in the initiation of germination of more than five log cycles in the number of spores, making them sensitive to subsequent pasteurization heat treatment, whereas they were not sensitive to subsequent HIPEF treatment at temperatures less than 40 °C. An intermediate step is needed which allows the outgrowth of spores to vegetative cells. Thus, the combination of high hydrostatic pressure and HIPEF treatment offers an attractive alternative to the stabilization of food products by heat to inactivate spores.

Germination of Spores of Astrobiologically Relevant Bacillus Species in High-Salinity Environments

In times of increasing space exploration and search for extraterrestrial life, new questions and challenges for planetary protection, aiming to avoid forward contamination of different planets or moons with terrestrial life, are emerging. Spore-forming bacteria such as Bacillus species have a high contamination potential due to their spores' extreme resistance, enabling them to withstand space conditions. Spores require liquid water for their conversion into a growing cell (i.e., spore germination and subsequent growth). If present, water on extraterrestrial planets or moons is likely to be closely associated with salts (e.g., in salty oceans or brines), thus constituting high-salinity environments. Spores of Bacillus subtilis can germinate despite very high salt concentrations, although salt stress does exert negative effects on this process. In this study, germination and metabolic reactivation ("outgrowth") of spores of five astrobiologically relevant Bacillus species (B. megaterium, B. pumilus SAFR-032, B. nealsonii, B. mojavensis, and B. vallismortis) in high salinity (≤3.6 M NaCl) were investigated. Spores of different species exhibited different germination and outgrowth capabilities in high salinity, which strongly depended on germination conditions, especially the exact composition of the medium. In this context, a new "universal" germination trigger for Bacillus spores, named KAGE (KCl, L-alanine, D-glucose, ectoine), was identified, which will be very useful for future comparative germination and outgrowth studies on different Bacillus species. Overall, this study yielded interesting new insights on salt stress effects on spore germination and points out the difficulty of predicting the potential of spores to contaminate salty environments on extraterrestrial celestial bodies.

KEY WORDS

Bacillus species-Spores-Germination-High salinity-Salt stress-NaCl-Inhibition. Astrobiology 16, 500-512.

Pressure-Based Strategy for the Inactivation of Spores

Since the first application of high hydrostatic pressure (HHP) for food preservation more than 100 years ago, a wealth of knowledge has been gained on molecular mechanisms underlying the HHP-mediated destruction of microorganisms. However, one observation made back then is still valid, i.e. that HHP alone is not sufficient for the complete inactivation of bacterial endospores. To achieve "commercial sterility" of low-acid foods, i.e. inactivation of spores capable of growing in a specific product under typical storage conditions, a combination of HHP with other hurdles is required (most effectively with heat (HPT)). Although HPT processes are not yet industrially applied, continuous technical progress and increasing consumer demand for minimally processed, additive-free food with long shelf life, makes HPT sterilization a promising alternative to thermal processing.In recent years, considerable progress has been made in understanding the response of spores of the model organism B. subtilis to HPT treatments and detailed insights into some basic mechanisms in Clostridium species shed new light on differences in the HPT-mediated inactivation of Bacillus and Clostridium spores. In this chapter, current knowledge on sporulation and germination processes, which presents the basis for understanding development and loss of the extreme resistance properties of spores, is summarized highlighting commonalities and differences between Bacillus and Clostridium species. In this context, the effect of HPT treatments on spores, inactivation mechanism and kinetics, the role of population heterogeneity, and influence factors on the results of inactivation studies are discussed.

Monitoring rates and heterogeneity of high-pressure germination of bacillus spores by phase-contrast microscopy of individual spores

Germination of Bacillus spores with a high pressure (HP) of ∼150 MPa is via activation of spores' germinant receptors (GRs). The HP germination of multiple individual Bacillus subtilis spores in a diamond anvil cell (DAC) was monitored with phase-contrast microscopy. Major conclusions were that (i) >95% of wild-type spores germinated in 40 min in a DAC at ∼150 MPa and 37°C but individual spores' germination kinetics were heterogeneous; (ii) individual spores' HP germination kinetic parameters were similar to those of nutrient-triggered germination with a variable lag time (Tlag) prior to a period of the rapid release (ΔTrelease) of the spores' dipicolinic acid in a 1:1 chelate with Ca(2+) (CaDPA); (iii) spore germination at 50 MPa had longer average Tlag values than that at ∼150 MPa, but the ΔTrelease values at the two pressures were identical and HPs of <10 MPa did not induce germination; (iv) B. subtilis spores that lacked the cortex-lytic enzyme CwlJ and that were germinated with an HP of 150 MPa exhibited average ΔTrelease values ∼15-fold longer than those for wild-type spores, but the two types of spores exhibited similar average Tlag values; and (v) the germination of wild-type spores given a ≥30-s 140-MPa HP pulse followed by a constant pressure of 1 MPa was the same as that of spores exposed to a constant pressure of 140 MPa that was continued for ≥35 min; (vi) however, after short 150-MPa HP pulses and incubation at 0.1 MPa (ambient pressure), spore germination stopped 5 to 10 min after the HP was released. These results suggest that an HP of ∼150 MPa for ≤30 s is sufficient to fully activate spores' GRs, which remain activated at 1 MPa but can deactivate at ambient pressure.

Reduction of Bacillus subtilis, Bacillus stearothermophilus and Streptococcus faecalis in meat batters by temperature-high hydrostatic pressure pasteurization

People have a growing preference for fresh, healthy, palatable and nutritious meals and drinks. However, as food deterioration is a constant threat along the entire food chain, food preservation remains as necessary now as in the past. High pressure processing is one of the emerging technologies being studied as an alternative to the classical pasteurization and sterilization treatments of food. Samples of fried minced pork meat were inoculated with strains of Streptococcus faecalis and with sporulating microorganisms like Bacillus subtilis and stearothermophilus. The samples were subjected to several combined temperature-high pressure treatments predicted by the mathematical model applied in Response Surface Methodology. Using the "Box-Behnken" concept, the number of tests for a whole area of pressure-temperature-time-combinations (pressure variation: 50-400 MPa, temperature variation 20-80°C, time variation 1-60 min) could be limited to 15. In the center point of the model, the experimental combination was performed in triple to estimate the experimental variance. All the tests were executed in a randomized order to exclude the disturbing effect of environmental factors. Microbial analysis revealed for each microorganism an important reduction in total plate count, demonstrating a superior pressure resistance of the sporulating microorganisms in comparison with the most pressure resistant vegetative species Streptococcus faecalis. The effect of the medium composition could be neglected, showing little protective effect of, e.g. the fat fraction as seen in heat preservation techniques.

Inactivation of Bacillus amyloliquefaciens spores by a combination of sucrose laurate and pressure-assisted thermal processing

The aim of this research was to study the effect of sucrose laurate ester (SL) on enhancing pressure-assisted thermal processing (PATP) inactivation of Bacillus amyloliquefaciens Fad 82 spores. B. amyloliquefaciens spores (∼10⁸ CFU/ml) were suspended in deionized water, solutions of 0.1, 0.5, and 1.0% SL, and mashed carrots without or with 1% SL. Samples were treated at 700 MPa and 105°C for 0 (come-up time), 1, 2, and 5 min and analyzed by pour-plating and most-probable-number techniques. Heat shock (80°C, 10 min) was applied to untreated and treated samples to study the germination rates. Results were also compared against samples treated by high pressure processing (700 MPa, 35°C) and thermal processing (105°C, 0.1 MPa). Among the combinations tested, SL at concentrations of 1.0% showed the best synergistic effect against spores of B. amyloliquefaciens when combined with PATP treatments. In the case of high pressure and thermal processing treatments, SL did not enhance spore inactivation at the conditions tested. These results suggest that SL is a promising antimicrobial compound that can help reduce the severity of PATP treatments.

Reproduction of Bacillus stearothermophilus as a Function of Temperature and Pressure

The colony-forming ability and the rate of reproduction of Bacillus stearothermophilus were determined as a function of temperature and pressure. Colonies were formed between 39 and 70 degrees C at atmospheric pressure and between 54 and 67 degrees C at 45 MPa. Colonies did not form at 55.9 MPa. The rate of reproduction in broth cultures decreased with increasing pressure at all temperatures. The rate of reproduction diminished rapidly with pressure above 10.4 MPa. Therefore, increased hydrostatic pressure was not sufficient to enable B. stearothermophilus to function beyond the temperature limiting growth and reproduction at atmospheric pressure, and B. stearothermophilus should grow in naturally or artificially warmed regions of the deep sea, where the pressure is less than approximately 50 MPa, although growth rates would be low above 10 MPa.

Comparison of pressure resistances of spores of six bacillus strains with their heat resistances

The pressure resistances of the spores of six Bacillus strains were examined at 5 to 10(deg)C and were compared with their heat resistances. The pressure treatments (at 981 MPa for 40 min and at 588 MPa for 120 min) did not inactivate the spores of B. stearothermophilus IAM12043, B. subtilis IAM12118, and B. licheniformis IAM13417. However, these spores had large differences in heat resistance. The spores of B. megaterium IAM1166 were 9.3 times more pressure resistant but 246 times less heat resistant than those of B. stearothermophilus IAM11001. The spores of B. coagulans IAM1194 were activated by the pressure treatments. There was no correlation between these pressure and heat resistances.

Superdormant spores of bacillus species germinate normally with high pressure, peptidoglycan fragments, and bryostatin

Superdormant spores of Bacillus cereus and Bacillus subtilis germinated just as well as dormant spores with pressures of 150 or 500 MPa and with or without heat activation. Superdormant B. subtilis spores also germinated as well as dormant spores with peptidoglycan fragments or bryostatin, a Ser/Thr protein kinase activator.

The combined effects of high pressure and nisin on germination and inactivation of Bacillus spores in milk

AIMS

The aim of this work was to investigate the germination and inactivation of spores of Bacillus species in buffer and milk subjected to high pressure (HP) and nisin.

METHODS AND RESULTS

Spores of Bacillus subtilis and Bacillus cereus suspended in milk or buffer were treated at 100 or 500 MPa at 40 degrees C with or without 500 IU ml(-1) of nisin. Treatment at 500 MPa resulted in high levels of germination (4 log units) of B. subtilis spores in both milk and buffer; this increased to >6 logs by applying a second cycle of pressure. Viability of B. subtilis spores in milk and buffer was reduced by 2.5 logs by cycled HP, while the addition of nisin (500 IU ml(-1)) prior to HP treatment resulted in log reductions of 5.7 and 5.9 in phosphate buffered saline and milk, respectively. Physical damage of spores of B. subtilis following HP was apparent using scanning electron microscopy. Treating four strains of B. cereus at 500 MPa for 5 min twice at 40 degrees C in the presence of 500 IU ml(-1) nisin proved less effective at inactivating the spores of these isolates compared with B. subtilis and some strain-to-strain variability was observed.

CONCLUSIONS

Although high levels of germination of Bacillus spores could be achieved by combining HP and nisin, complete inactivation was not achieved using the aforementioned treatments.

SIGNIFICANCE AND IMPACT OF THE STUDY

Combinations of HP treatment and nisin may be an appealing alternative to heat pasteurization of milk.

History of science – spores

Bacterial endospores were first studied 130 years ago by Cohn in 1876 and independently by Koch in the same year. Although spore dormancy and resistance have been much studied since then, questions still remain concerning the basic mechanisms and the kinetics of heat inactivation in particular. Likewise, the extreme dormancy and longevity of spores was recognized early on and later greatly extended but still evade complete understanding. Evidence has accumulated for the involvement of specific spore components such as calcium, dipicolinic acid, small acid soluble proteins in the core and peptidoglycan in the cortex. Involvement of physical factors too, such as the relative dehydration of the core, maybe in a high-viscosity state or even in a glassy state, has added to appreciation of the multicomponent nature of dormancy and resistance. Spore-former morphology formed the basis for early classification systems of sporeformers from about 1880 and consolidated in the mid-1900s, well prior to the use of modern genetic procedures. With respect to sporulation, groundbreaking sequence studies in the 1950s provided the basis for later elucidation of the genetic control widely relevant to many cell differentiation mechanisms. With respect to the breaking of dormancy (activation and germination), the elucidation of mechanisms began in the 1940s following the observations of Hills at Porton who identified specific amino acid and riboside 'germinants', and laid the basis for the later genetic analyses, the identification of germinant receptor genes and the elucidation of key germination reactions. The nonexponential nature of germination kinetics has thwarted the development of practical Tyndallization-like processing. So inactivation by heat remains the premier method of spore control, the basis of a huge worldwide industry, and still relying on the basic kinetics of inactivation of Clostridium botulinum spores, and the reasoning regarding safety first evolved by Bigelow et al. in 1920 and Esty and Meyer in 1922. 'Newer' processes such as treatment with ionizing radiation (first proposed in 1905) and high hydrostatic pressure (first proposed in 1899) may be introduced if consumer resistance and some remaining technical barriers could be overcome.

Combined treatment of high pressure and heat on killing spores of Alicyclobacillus acidoterrestris in apple juice concentrate

Alicyclobacillus acidoterrestris, a thermoacidophilic and spore-forming bacterium, has been isolated from spoiled acidic juices and is considered to be one of the important target microorganisms in quality control of acidic canned foods. Combined high pressure and heat treatment showed an effectiveness to control A. acidoterrestris spores. However, the effectiveness of the combined treatment may change upon the apple juice concentration. Therefore, the objective of this study was to evaluate different levels of apple juice concentrate for reduction of Alicyclobacillus spores by high pressure and heat. Spores of A. acidoterrestris were inoculated into three different concentrations of apple juice (17.5, 35, and 70 degrees Brix), and subjected to three high-pressure treatments (207, 414, and 621 MPa) at four different temperatures (22, 45, 71, and 90 degrees C). High-pressure treatment (207, 414, and 621 MPa) at 22degrees C did not reduce the level of spores regardless of the apple juice concentration (P > 0.05). In diluted apple juice (17.5 degrees Brix), the combined treatment of high pressure and heat resulted in spore reductions of about 2 log at 45 degrees C, and more than 5 log at higher temperatures (71 and 90 degrees C) in a high-pressure and temperature-dependent manner. For apple juice with a higher concentration (30 degrees Brix), high-pressure treatment showed no effect at 45 degrees C but resulted in about 2 and 4 log reduction at 71 and 90 degrees C, respectively. However, for apple juice concentrate (70 degrees Brix), treatment with heat or high pressure alone, or their combinations showed no inactivation against spores of A. acidoterrestris. It is likely that differences in the water availability explain the greater resistance of spores to high-pressure inactivation in the juice concentrates than in diluted juices. Our results demonstrate that the effect of high pressure combined with heat against spores of A. acidoterrestris was highly dependent on the apple juice concentration.

Inactivation of Bacillus spores by the combination of moderate heat and low hydrostatic pressure in ketchup and potage

The combination effect of moderate heat and low hydrostatic pressure (MHP) on the reduction of Bacillus subtilis, Bacillus coagulans and Geobacillus stearothermophilus spores in food materials (potage and ketchup) was investigated. These bacterial spores were suspended in potage (pH 7), acidified potage (pH 4), neutralized ketchup (pH 7) and ketchup (pH 4). The suspensions were treated with and without pressure (100 MPa) and temperatures of 65-85 degrees C for 3 to 12 h. The bacterial spores were inactivated by 4-8 log cycles during MHP treatment in potage, acidified potage and ketchup, whereas the spores were highly resistant to long time heat treatment in potage and neutralized ketchup. The degrees of spore destruction were mostly dependent on pH and medium composition during MHP treatment. The inactivation effect in MHP treatment was higher at the pH 7 than at pH 4 both in ketchup and potage. The bacterial spores showed higher inactivation in potage than ketchup during MHP treatment.

Screening for Bacillus subtilis mutants deficient in pressure induced spore germination: identification of ykvU as a novel germination gene

Exposure to high pressure induces germination in spores of Bacillus subtilis. To investigate the mechanisms of this process and to compare the pressure and nutrient induced germination pathways, a random transposon knock-out library of B. subtilis was constructed and screened for clones with a compromised pressure induced germination at 100 MPa. Two mutants were isolated and their transposon insertion was mapped to gerAC and ykvU respectively. While GerAC is required for production of the l-alanine receptor which has been implicated in pressure-induced germination before, YkvU is shown here to be a novel germination determinant in B. subtilis, affecting germination by high (100 MPa) and very high (600 MPa) pressure, by nutrients and by dodecylamine, but not by Ca(2+)-dipicolinic acid.

Pressure inactivation of Bacillus endospores

The inactivation of bacterial endospores by hydrostatic pressure requires the combined application of heat and pressure. We have determined the resistance of spores of 14 food isolates and 5 laboratory strains of Bacillus subtilis, B. amyloliquefaciens, and B. licheniformis to treatments with pressure and temperature (200 to 800 MPa and 60 to 80 degrees C) in mashed carrots. A large variation in the pressure resistance of spores was observed, and their reduction by treatments with 800 MPa and 70 degrees C for 4 min ranged from more than 6 log units to no reduction. The sporulation conditions further influenced their pressure resistance. The loss of dipicolinic acid (DPA) from spores that varied in their pressure resistance was determined, and spore sublethal injury was assessed by determination of the detection times for individual spores. Treatment of spores with pressure and temperature resulted in DPA-free, phase-bright spores. These spores were sensitive to moderate heat and exhibited strongly increased detection times as judged by the time required for single spores to grow to visible turbidity of the growth medium. The role of DPA in heat and pressure resistance was further substantiated by the use of the DPA-deficient mutant strain B. subtilis CIP 76.26. Taken together, these results indicate that inactivation of spores by combined pressure and temperature processing is achieved by a two-stage mechanism that does not involve germination. At a pressure between 600 and 800 MPa and a temperature greater than 60 degrees C, DPA is released predominantly by a physicochemical rather than a physiological process, and the DPA-free spores are inactivated by moderate heat independent of the pressure level. Relevant target organisms for pressure and temperature treatment of foods are proposed, namely, strains of B. amyloliquefaciens, which form highly pressure-resistant spores.

Comparison of pressure and heat resistance of Clostridium botulinum and other endospores in mashed carrots

Inactivation of bacterial endospores in food requires a combination of pressure and moderate heat. Endospore resistance of seven Clostridium botulinum strains was compared with those of Bacillus spp. (B. cereus, B. subtilis, B. licheniformis, B. smithii, B. amyloliquefaciens) and Thermoanaerobacterium thermosaccharolyticum with respect to pressure (600 to 800 MPa) and temperature (80 to 116 degrees C) treatments in mashed carrots. A large variation was observed in the pressure resistance of C. botulinum spores. Their reduction after treatments with 600 MPa at 80 degrees C for 1 s ranged from more than 5.5 log units to no reduction. Spores of the proteolytic C. botulinum TMW 2.357 exhibited a greater resistance to pressure than spores from all other bacteria examined, with the exception of B. amyloliquefaciens. Heat resistance of spores did not correlate with pressure resistance, either within strains of C. botulinum or when C. botulinum spores were compared with spores of T. thermosaccharolyticum. A quantitative release of dipicolinic acid was observed from C. botulinum spores on combined pressure and temperature treatments only after inactivation of more than 99.999% of the spores. Thus, dipicolinic acid is released by a physicochemical rather than a physiological process. The resistance of spores to combined pressure and temperature treatments correlated with their ability to retain dipicolinic acid. B. amyloliquefaciens, a mesophilic organism that forms highly pressure-resistant spores is proposed as a nonpathogenic target organism for high-pressure process development.

Inactivation of Geobacillus stearothermophilus spores by high-pressure carbon dioxide treatment

High-pressure CO2 treatment has been studied as a promising method for inactivating bacterial spores. In the present study, we compared this method with other sterilization techniques, including heat and pressure treatment. Spores of Bacillus coagulans, Bacillus subtilis, Bacillus cereus, Bacillus licheniformis, and Geobacillus stearothermophilus were subjected to CO2 treatment at 30 MPa and 35 degrees C, to high-hydrostatic-pressure treatment at 200 MPa and 65 degrees C, or to heat treatment at 0.1 MPa and 85 degrees C. All of the bacterial spores except the G. stearothermophilus spores were easily inactivated by the heat treatment. The highly heat- and pressure-resistant spores of G. stearothermophilus were not the most resistant to CO2 treatment. We also investigated the influence of temperature on CO2 inactivation of G. stearothermophilus. Treatment with CO2 and 30 MPa of pressure at 95 degrees C for 120 min resulted in 5-log-order spore inactivation, whereas heat treatment at 95 degrees C for 120 min and high-hydrostatic-pressure treatment at 30 MPa and 95 degrees C for 120 min had little effect. The activation energy required for CO2 treatment of G. stearothermophilus spores was lower than the activation energy for heat or pressure treatment. Although heat was not necessary for inactivationby CO2 treatment of G. stearothermophilus spores, CO2 treatment at 95 degrees C was more effective than treatment at 95 degrees C alone.

Combined effects of high hydrostatic pressure and temperature for inactivation of Bacillus anthracis spores

Spores of Bacillus anthracis are known to be extremely resistant to heat treatment, irradiation, desiccation, and disinfectants. To determine inactivation kinetics of spores by high pressure, B. anthracis spores of a Sterne strain-derived mutant deficient in the production of the toxin components (strain RP42) were exposed to pressures ranging from 280 to 500 MPa for 10 min to 6 h, combined with temperatures ranging from 20 to 75 degrees C. The combination of heat and pressure resulted in complete destruction of B. anthracis spores, with a D value (exposure time for 90% inactivation of the spore population) of approximately 4 min after pressurization at 500 MPa and 75 degrees C, compared to 160 min at 500 MPa and 20 degrees C and 348 min at atmospheric pressure (0.1 MPa) and 75 degrees C. The use of high pressure for spore inactivation represents a considerable improvement over other available methods of spore inactivation and could be of interest for antigenic spore preparation.

Inactivation of Bacillus cereus spores in milk by mild pressure and heat treatments

The objective of this work was to study the germination and subsequent inactivation of Bacillus cereus spores in milk by mild hydrostatic pressure treatment. In an introductory experiment with strain LMG6910 treated at 40 degrees C for 30 min at 0, 100, 300 and 600 MPa, germination levels were 1.5 to 3 logs higher in milk than in 100 mM potassium phosphate buffer (pH 6.7). The effects of pressure and germination-inducing components present in the milk on spore germination were synergistic. More detailed experiments were conducted in milk at a range of pressures between 100 and 600 MPa at temperatures between 30 and 60 degrees C to identify treatments that allow a 6 log inactivation of B. cereus spores. The mildest treatment resulting in a 6 log germination was 30 min at 200 MPa/40 degrees C. Lower treatment pressures or temperatures resulted in considerably less germination, and higher pressures and temperatures further increased germination, but a small fraction of spores always remained ungerminated. Further, not all germinated spores were inactivated by the pressure treatment, even under the most severe conditions (600 MPa/60 degrees C). Two possible approaches to achieve a 6 log spore inactivation were identified, and validated in three additional B. cereus strains. The first is a single step treatment at 500 MPa/60 degrees C for 30 min, the second is a two-step treatment consisting of pressure treatment for 30 min at 200 MPa/45 degrees C to induce spore germination, followed by mild heat treatment at 60 degrees C for 10 min to kill the germinated spores. Reduction of the pressurization time to 15 min still allows a 5 log inactivation. These results illustrate the potential of high-pressure treatment to inactivate bacterial spores in minimally processed foods.

Apports des hautes pressions aux sciences pharmaceutiques et médicales

Since the beginning of the 20th century, effects of high pressure on biological systems have been studied, but the first applications in this domain have been developed in the 90's and concerned the preservation of food-stuff. Hence, much research work has been undertaken in order to develop high pressure effects in Biosciences. In the last decade, new methods or processes using high pressure (obtaining therapeutic molecules; decontamination or sterilization of biological stuff, sensitive drugs and drug carriers; development of vaccines; using high pressure as a tool in order to simulate and explore the mechanisms of proteins aggregation) underlining the potentialities of this technology in Medical and Pharmaceutical Sciences.