Influence of disk preparation on detection of metallo-beta-lactamase-producing isolates by the combined disk assay

Biofilm and metallo beta-lactamase production among the strains of Pseudomonas aeruginosa and Acinetobacter spp. at a Tertiary Care Hospital in Kathmandu, Nepal

Introduction

Pseudomonas aeruginosa and Acinetobacter spp. are found to be associated with biofilm and metallo-β-lactamase production and are the common causes of serious infections mainly in hospitalized patients. So, the main aims of this study were to determine the rates of biofilm production and metallo beta-lactamase production (MBL) among the strains of Pseudomonas aeruginosa and Acinetobacter spp. isolated from hospitalized patients.

Methods

A total of 85 P. aeruginosa isolates and 50 Acinetobacter spp. isolates isolated from different clinical specimens from patients admitted to Shree Birendra Hospital, Kathmandu, Nepal from July 2013 to May 2014 were included in this study. The bacterial isolates were identified with the help of biochemical tests. Modified Kirby-Bauer disc diffusion technique was used for antimicrobial susceptibility testing. Combined disc diffusion technique was used for the detection of MBL production, while Congo red agar method and tube adherence method were used for detection of biofilm production.

Results

Around 16.4% of P. aeruginosa isolates and 22% of the strains of Acinetobacter spp. were metallo β-lactamase producers. Out of 85 P. aeruginosa isolates, 23 (27.05%) were biofilm producers according to tube adherence test while, only 13 (15.29%) were biofilm producers as per Congo red agar method. Similarly, out of 50 Acinetobacter spp. 7 (14%) isolates were biofilm producers on the basis of tube adherence test, while only 5 (10%) were positive for biofilm production by Congo red agar method. Highest rates of susceptibility of P. aeruginosa as well as Acinetobacter spp. were seen toward colistin.

Conclusion

In our study, biofilm production and metallo beta-lactamase production were observed among Pseudomonas aeruginosa and Acinetobacter spp. However, no statistically significant association could be established between biofilm production and metallo beta-lactamase production.

Detection of Colistin-Resistant MCR-1-Positive Escherichia coli by Use of Assays Based on Inhibition by EDTA and Zeta Potential

The emergence and rapid dissemination of colistin-resistant Escherichia coli carrying the plasmid-mediated mcr-1 gene have created an urgent need to develop specific screening methods. In this study, we evaluated four assays based on the inhibition of MCR-1 activity by EDTA: (i) a combined-disk test (CDT) comparing the inhibition zones of colistin and colistin (10 μg) plus EDTA (100 mM); (ii) reduction of colistin MIC (CMR) in the presence of EDTA (80 μg/ml); (iii) a modified rapid polymyxin Nordmann/Poirel test (MPNP); and (iv) alteration of zeta potential (R_ZP = ZP_+EDTA/ZP_-EDTA). We obtained encouraging results for the detection of MCR-1 in E. coli isolates recovered from human, food, and animal samples, using the following assay parameters: ≥3 mm difference in the inhibition zones between colistin disks without and with EDTA; ≥4-fold colistin MIC decrease in the presence of EDTA; R_ZP of ≥2.5; and the absence of metabolic activity and proliferation, indicated by unchanged color of phenol red in the presence of colistin-EDTA, in the MPNP test. In this regard, the CDT, CMR, R_ZP, and MPNP assays exhibited sensitivities of 96.7, 96.7, 95.1, and 96.7% and specificities of 89.6, 83.3, 100, and 100%, respectively, for detecting MCR-1-positive E. coli Our results demonstrate that inhibition by EDTA and zeta potential assays may provide simple and inexpensive methods for the presumptive detection of MCR-1-producing E. coli isolates in human and veterinary diagnostic laboratories.

Current methods for the identification of carbapenemases

Detection of carbapenemases in clinical microbiology labs is a challenging issue. Comparison of the results of susceptibility testing with the breakpoint values of carbapenems is the first step in the screening of carbapenemase producers. To date, screening of carbapenemase-producing (CP) bacteria has been mostly performed by a selective medium. Although these media are practical for the detection of most CP isolates, the inoculated plates have to be incubated overnight. Subsequently, we need the confirmation of the carbapenemase producers present in the culture medium by additional testing [e.g. inhibition studies with liquid or solid media, modified Hodge test (MHT), or gradient strips], which can take up to another 48 hours. Despite the lack of discrimination between the three different classes of carbapenemases (KPC, MBL and OXA) and difficulties in the interpretation of the results, the MHT is usually deemed as the phenotypic reference method for the confirmation of carbapenemase production. Molecular techniques, such as real-time polymerase chain reaction (PCR) assays, in contrast to phenotypic methods that are very time consuming, are faster and allow for the quick identification of carbapenemase genes. These techniques can detect and characterize carbapenemases, including NDM- and KPC-mediated resistance, which is critical for epidemiological investigations. The aim of this review is to gather a summary of the available methods for carbapenemase detection and describe the strengths and weaknesses of each method.

Phenotypic detection of metallo-β-lactamase in imipenem-resistant Pseudomonas aeruginosa

Carbapenems are the primary choice of treatment for severe Pseudomonas aeruginosa infection. However, the emergence of carbapenem resistance due to the production of metallo-β-lactamases (MBLs) is of global concern. In this study, 90 imipenem- (IPM- or IP-) resistant P. aeruginosa (IRPA) isolates, including 32 previously tested positive and genotyped for MBL genes by PCR, were subjected to double-disk synergy test (DDST), combined disk test (CDT), and imipenem/imipenem-inhibitor (IP/IPI) E-test to evaluate their MBLs detection capability. All three methods were shown to have a sensitivity of 100%. However, DDST was the most specific of the three (96.6%), followed by IP/IPI E-test interpreted based on the single criteria of IP/IPI ≥8 as positive (62.1%), and CDT was the least specific (43.1%). Based on the data from this evaluation, we propose that only IRPA with IP MIC >16 μg/mL and IP/IPI ≥8 by IP/IPI E-test should be taken as positive for MBL activity. With the new dual interpretation criteria, the MBL IP/IPI E-test was shown to achieve 100% sensitivity as well as specificity for the IRPA in this study. Therefore, the IP/IPI E-test is a viable alternative phenotypic assay to detect MBL production in IRPA in our population in circumstances where PCR detection is not a feasible option.

Evaluation of phenotypic tests for detection of metallo-beta-lactamase-producing Pseudomonas aeruginosa strains in China

A total of 264 nonduplicate strains of imipenem (IPM)-nonsusceptible Pseudomonas aeruginosa were isolated from hospitals in 16 different regions throughout China. These 264 IPM-nonsusceptible clinical isolates of P. aeruginosa were examined by PCR, a metallo-beta-lactamase (MBL) Etest, a double-disk synergy test (DDST), and a test using combined IPM disks supplemented with various amounts of EDTA. A total of 24 strains positive for MBLs were confirmed by PCR and DNA sequence analysis: 10 strains positive for the bla(VIM-2) gene, 13 strains positive for the bla(IMP-9) gene, and 1 strain positive for the bla(IMP-1) gene. Real-time reverse transcriptase PCR (RT-PCR) was used to verify whether the isolates harboring MBL genes produced the enzyme and was considered the standard for evaluation of the methodology in this study. Of these 24 MBL-positive stains, 21 were confirmed as MBL-producing strains by real time RT-PCR for MBL expression and the other 3 had no expression of MBLs. The sensitivities, specificities, and positive and negative predictive values for the MBL Etest, the DDST, and the combined disk (CD) assay were evaluated. The best method for screening for MBL production in P. aeruginosa strains from China was the CD assay (IMP-EDTA) using 750 microg of EDTA/disk with a breakpoint of >or=6 mm. In the CD assay (IPM-EDTA) with 290 microg and 750 microg EDTA, the zone diameter increases for VIM-2-producing P. aeruginosa isolates were greater than those for IMP-9-producing P. aeruginosa isolates (P = 0.00).

Identification of the first VIM metallo-beta-lactamase-producing multiresistant Aeromonas hydrophila strain

A VIM metallo-beta-lactamase-producing Aeromonas hydrophila strain carrying an integron-borne bla(VIM-4) gene was isolated from a cirrhotic patient's fecal sample in a Budapest hospital. The variable region of this integron is identical with that of a previously characterized integron from Pseudomonas aeruginosa clinical isolates in Pécs in southern Hungary.

Metallo-beta-lactamase detection: comparative evaluation of double-disk synergy versus combined disk tests for IMP-, GIM-, SIM-, SPM-, or VIM-producing isolates

The emergence of metallo-beta-lactamase (MBL)-producing isolates is a challenge to routine microbiology laboratories, since there are no standardized methods for detecting such isolates. The aim of this study was to evaluate the accuracy of different phenotypic methods to detect MBL production among Pseudomonas spp., Acinetobacter spp., and enterobacterial isolates, including GIM, IMP, SIM, SPM, and VIM variants. A total of 46 genetically unrelated Pseudomonas aeruginosa, Pseudomonas putida, Acinetobacter sp., and enterobacterial strains producing distinct MBLs were tested. Nineteen strains were included as negative controls. The inhibition of bacterial growth and beta-lactam hydrolysis caused by MBL inhibitors (IMBL) also were evaluated. The isolates were tested for MBL production by both a double-disk synergy test (DDST) and a combined disk assay (CD) using imipenem and ceftazidime as substrates in combination with distinct IMBL. One hundred percent sensitivity and specificity were achieved by DDST using 2-mercaptopropionic acid in combination with ceftazidime and imipenem for the detection of MBL production among P. aeruginosa and Acinetobacter species isolates, respectively. The CD test showed the same results for detecting MBL-producing enterobacteria by combining imipenem and EDTA, with a 5.0-mm-breakpoint increase in the size of the inhibition zone. Our results indicate that both phenotypic methods to detect MBL-producing isolates should be based on the genera to be tested, regardless of the enzyme produced by such isolates, as well as on the local prevalence of MBL producers.