Dosage form preference consultation study in children and young adults: paving the way for patient-centred and patient-informed dosage form development

Dual-Responsive Ion-Exchange Resin Encapsulated Atomoxetine Hydrochloride for Taste-Masking and Biphasic Release

Atomoxetine hydrochloride (ATH) is a first-line medication used to treat Attention Deficit Hyperactivity Disorder (ADHD) in children. However, it poses challenges such as a bitter taste and difficulties in dose adjustment. While once-daily administration may result in excessive drug exposure, twice-daily dosing improves plasma drug concentration stability but can reduce patient compliance, especially in school-aged children. To address these challenges, a novel strategy was proposed that involves encapsulating ATH into ion exchange resins (IERs) (referred to as ATH@IER). The pH-responsive release of ATH from the ATH@IER exhibited a limited release rate in neutral conditions, effectively masking the bitter taste, which was evaluated through electronic tongue analysis. The cation-responsive release of ATH from the ATH@IER demonstrated immediate-release (IR) property, which was combined with Eudragit® RS100 coated ATH@IER (ATH@MC) to establish a biphasic release system. ATH orally disintegrating tablets (ATH ODT) were manufactured using a composition of ATH@IER and ATH@MC (40:60, w/w), along with other excipients. Pharmacokinetic studies demonstrated that a single dose of ATH ODT produced a bimodal plasma concentration, resulting in a two-fold decrease in peak concentration (Cmax) while maintaining an unchanged area under the drug concentration-time curve (AUC0-t) compared to the commercial ATH oral solution administered once. Notably, the plasma drug concentration of ATH ODT remained steadier than that of the commercial product when administered twice. In conclusion, ATH ODT represents a promising formulation that effectively masks bitter taste and provides biphasic release for the treatment of ADHD.

Synthetic and Biogenic Materials for Oral Delivery of Biologics: From Bench to Bedside

The development of nucleic acid and protein drugs for oral delivery has lagged behind their production for conventional nonoral routes. Over the past decade, the evolution of DNA- and RNA-based technologies combined with the innovation of state-of-the-art delivery vehicles for nucleic acids has brought rapid advancements to the biopharmaceutical field. Nucleic acid therapies have the potential to achieve long-lasting effects, or even cures, by inhibiting or editing genes, which is not possible with conventional small-molecule drugs. However, challenges and limitations must be addressed before these therapies can provide cures for chronic conditions and rare diseases, rather than only offering temporary relief. Nucleic acids and proteins face premature degradation in the acidic, enzyme-rich stomach environment and are rapidly cleared by the liver. To overcome these challenges, various delivery vehicles have been developed to transport therapeutic compounds to the intestines, where the active compounds are released and gut microbiota and mucosal immune system also play an important role. This review provides a comprehensive overview of the promises and pitfalls associated with the oral route of administration of biologics, current delivery systems, applications of orally delivered therapeutics, and the challenges and considerations for translation of nucleic acid and protein therapeutics into clinical practice.

Net Promoter Score Model for Evaluating Paediatric Medicine Acceptability: Validation and Feasibility Study

Background/Objectives: Medicine acceptability is crucial for paediatric drug development, yet its assessment remains challenging due to the multifaceted nature of sensory attributes like taste, smell, and mouthfeel. Traditional methods of acceptability evaluation often involve complex questionnaires and lack standardisation, leading to difficulties in a comparative analysis across studies. This study aimed to develop a simplified, standardised approach for assessing medicine acceptability introducing the Net Promoter Score (NPS) framework to derive a Medicine Acceptability Score (MAS). Methods: A retrospective analysis was conducted using taste assessment data from nine paediatric formulations across four studies. The MAS was calculated by identifying an optimal range for categorising participant responses, which encapsulated diverse sensory attributes into a single metric. Validation was performed across various age groups and different formulations to test the reliability and discriminatory power of MAS. Results: The MAS effectively discriminated between acceptable and unacceptable formulations, providing a practical tool for formulation development. Conclusions: The MAS offers a novel, standardised metric for evaluating paediatric medicine acceptability, addressing key limitations of traditional methods. Future studies are recommended to refine the MAS model through the establishment of benchmark scores for chronic and acute medications, thereby standardising acceptability assessment of medicines across the pharmaceutical industry.

The impact of patients' preference for pharmaceutical dosage forms on medication discontinuation among patients attending Red Cross pharmacies in Northwest Ethiopia

Medication discontinuation poses a significant challenge to the effectiveness of therapeutic interventions and overall patient treatment outcomes. Improving the pharmaceutical dosage forms' acceptability for patients, knowledge of proper ways for medication usage, and proper storage of medications play an indispensable role in enhancing patient safety. Thus the present study aimed to assess patients' preferences for pharmaceutical dosage forms, their knowledge of storage of medications, and factors associated with medication discontinuation among patients attending Red Cross pharmacies in Northwest Ethiopia. This multicenter cross-sectional study was conducted from January 16, 2024, to February 15, 2024. The collected data was entered into EpiData (version 4.6.0) and statistical analysis was carried out by exporting to STATA version 14. A p-value of less than 0.05 was statistically considered as significant. Among 388 study participants, more than half (54.4%) had a history of medication discontinuation and frequency of administration was the most contributing factor (39.4%). The common reason for study participants' dosage form preferences was the ease of use (62.1%), followed by high efficacy and safety (11.9%). Rural residency [AOR = 1.61; 95%CI: 1.03, 2.52], number of medications [AOR = 4.29; 95%CI: 2.03, 9.06], preference for the type of dosage forms [AOR = 5.86; 95% CI: 3.36, 10.21], and frequency of administration [AOR = 2.49; 95%CI: 1.55, 3.99] were factors significantly associated with medication discontinuation. The present study revealed that more than half of the study participants had a history of medication discontinuation.To reduce medication discontinuation and enhance the treatment outcome of patients, medical and pharmacy professionals should improve information concerning dosage forms and their acceptability for patients through ongoing patient education and training.

Patients' Preference for Pharmaceutical Dosage Forms: Does It Affect Medication Adherence? A Cross-Sectional Study in Community Pharmacies

Background

Dosage forms (DF), which are primarily divided into solid, semisolid, liquid, and gaseous, are among the different factors that influence drug adherence. Thus, the purpose of this study was to evaluate how patients' preferences for pharmaceutical DF affected their adherence to medication in community pharmacies in Gondar town.

Methods

A cross-sectional study on community pharmacies was carried out from June 25 to July 27, 2023. The statistical package for social sciences, version 26, was used for data analysis. Factors associated with patient medication discontinuation were found using both bivariate and multivariate logistic regressions.

Results

According to our study, the majority of respondents (42.4%) preferred tablet DF. Most respondents (63.9%) DF preference was affected by the size of the medication, in which small-sized were most preferable (59.6%). The oral route of administration was the most preferable (71.2%). The majority of the respondents (59.9%) had a history of discontinuation of medicines. Being male (AOR=2.21, 95% CI: 1.29, 3.79), living in rural areas (AOR=1.98, 95% CI: 1.03, 3.83), types of DF (AOR=4.59, 95% CI: 1.28, 16.52), high frequency of administration (AOR=2.22, 95% CI: 1.08, 4.57), high cost of medication (AOR=3.09, 95% CI: 1.69, 5.68), getting some improvement from illness (AOR=3.29, 95% CI: 1.10, 9.87), and high number of drugs (AOR=3.29, 95% CI: 1.67, 13.85) were significantly associated with medication discontinuation.

Conclusion

Our findings showed that tablet dosage forms, oral routes of administration, and once-daily taking of medicines were the most preferred by our respondents. Being male, living in rural areas, types of DF, high frequency of administration, high cost of medication, getting some improvement from illness, and high number of drugs were significantly associated with medication discontinuation. This provides an insight into what to consider when prescribing medicine to enhance patients' adherence and overall therapeutic outcomes.

Colour of Medicines and Children's Acceptability? A Systematic Literature Review of Children's Perceptions about Colours of Oral Dosage Forms

The colour of a product plays an important role in consumer experiences, and in the context of pharmaceutical products, this could potentially affect a patient's expectations, behaviours, and adherence. Several studies have been conducted on adults, but little is known about children's opinions on colours of medicines and to what extent medicines' colour affects their acceptability. To address this gap, a systematic search in PubMed, Scopus, MEDLINE, and Web of Science was conducted. Two authors independently screened the titles, abstracts, and references of all articles and selected studies conducted on children (0-18 years old), assessing children's preferences or opinions about colour of oral dosage forms as either a primary or secondary objective or as an anecdotal record. A total of 989 publications were identified and, after screening, 18 publications were included in the review. Red and pink were the most liked colours and there appeared to be a relationship between the colour of a medicine and expected taste/flavour. The review also highlighted a scarcity of information, usually collected as an anecdotal record. Several gaps in the current knowledge were underlined, emphasizing the need of patient-centred studies to understand if the use of certain colours can improve or worsen the acceptability of a paediatric medicine. This will help inform pharmaceutical manufacturers and regulators on the role and need of colours in children's medicines beyond quality purposes.

Potency of Xanthone Derivatives from Garcinia mangostana L. for COVID-19 Treatment through Angiotensin-Converting Enzyme 2 and Main Protease Blockade: A Computational Study

ACE2 and Mpro in the pathology of SARS-CoV-2 show great potential in developing COVID-19 drugs as therapeutic targets, due to their roles as the "gate" of viral entry and viral reproduction. Of the many potential compounds for ACE2 and Mpro inhibition, α-mangostin is a promising candidate. Unfortunately, the potential of α-mangostin as a secondary metabolite with the anti-SARS-CoV-2 activity is hindered due to its low solubility in water. Other xanthone isolates, which also possess the xanthone core structure like α-mangostin, are predicted to be potential alternatives to α-mangostin in COVID-19 treatment, addressing the low drug-likeness of α-mangostin. This study aims to assess the potential of xanthone derivative compounds in the pericarp of mangosteen (Garcinia mangostana L.) through computational study. The study was conducted through screening activity using molecular docking study, drug-likeness prediction using Lipinski's rule of five filtration, pharmacokinetic and toxicity prediction to evaluate the safety profile, and molecular dynamic study to evaluate the stability of formed interactions. The research results showed that there were 11 compounds with high potential to inhibit ACE2 and 12 compounds to inhibit Mpro. However, only garcinone B, in addition to being indicated as active, also possesses a drug-likeness, pharmacokinetic, and toxicity profile that was suitable. The molecular dynamic study exhibited proper stability interaction between garcinone B with ACE2 and Mpro. Therefore, garcinone B, as a xanthone derivative isolate compound, has promising potential for further study as a COVID-19 treatment as an ACE2 and Mpro inhibitor.

Taste Masking of Promethazine Hydrochloride Using l-Arginine Polyamide-Based Nanocapsules

Promethazine hydrochloride (PMZ), a potent H1-histamine blocker widely used to prevent motion sickness, dizziness, nausea, and vomiting, has a bitter taste. In the present study, taste masked PMZ nanocapsules (NCs) were prepared using an interfacial polycondensation technique. A one-step approach was used to expedite the synthesis of NCs made from a biocompatible and biodegradable polyamide based on l-arginine. The produced NCs had an average particle size of 193.63 ± 39.1 nm and a zeta potential of −31.7 ± 1.25 mV, indicating their stability. The NCs were characterized using differential scanning calorimetric analysis and X-ray diffraction, as well as transmission electron microscopy that demonstrated the formation of the NCs and the incorporation of PMZ within the polymer. The in vitro release study of the PMZ-loaded NCs displayed a 0.91 ± 0.02% release of PMZ after 10 min using artificial saliva as the dissolution media, indicating excellent taste masked particles. The in vivo study using mice revealed that the amount of fluid consumed by the PMZ-NCs group was significantly higher than that consumed by the free PMZ group (p < 0.05). This study confirmed that NCs using polyamides based on l-arginine and interfacial polycondensation can serve as a good platform for the effective taste masking of bitter actives.

3D printing hybrid materials using fused deposition modelling for solid oral dosage forms

3D printing in the pharmaceutical and healthcare settings is expanding rapidly, such as the rapid prototyping of orthotics, dental retainers, drug-loaded implants, and pharmaceutical solid oral dosage forms. Through 3D printing, we have the capability to precisely control dose, release kinetics, and several aesthetic features of dosage forms such as colour, shape, and texture. Additionally, polypills can be created with combinations of medications in one solid dosage form at completely customisable strengths that would be extremely difficult to obtain commercially. As the technology and formulations developed through 3D printing are expanding, the development of new hybrid materials to obtain superior formulations are also gaining momentum. In this review we collate data on the importance of developing hybrid formulations of polymers, drugs and excipients necessary to produce reliable and high-quality 3D printed dosage forms with a special emphasis on fused deposition modelling (FDM). FDM technology is one of the most widely used forms of 3D printing and has demonstrated compatibility with unique polymer-based hybrids to allow for enhanced drug delivery, protection of thermolabile drugs, modifiable release kinetics, and more. The data collated covers different categories of hybrids as well as the methods used to fabricate them, and their respective effects on the properties of 3D printed solid oral dosage forms. Therefore, this review will provide an overview of upcoming and emerging trends in pharmaceutical 3D printing formulation compositions.

Preference, Perception, and Acceptability of Fluid Gels as a Potential Age-Appropriate Dosage Form for Elderly Patients with Dysphagia

The development of pharmaceutical dosage forms that are tailored to specific populations according to their preferences and acceptability could improve medication adherence, which could lead to effective pharmacotherapy. This study evaluated the preference for and perceptions of fluid gels as a potential age-appropriate dosage form for older adults with dysphagia. The palatability and swallowability of the developed fluid gels were also assessed to determine the consumer acceptability of this formulation. A cross-sectional survey was conducted through the electronic distribution of a self-administered questionnaire among adults in Malaysia between April and December 2021. A randomized and double-blinded clinical study was conducted to evaluate the palatability and swallowability of the fluid gels in 30 healthy participants. A cross-sectional study involving 673 respondents revealed that the fluid gels were perceived positively by consumers (64.4%), were easily swallowed (50.8%), were safe to be consumed (45.3%), and were suitable as a new pharmaceutical formulation (43.8%). The clinical study shows that moderately thickened fluid gels masked the bitterness of the medication and were easily swallowed. The newly developed fluid gels were also positively perceived by the participants. Taken together, fluid gels have shown great potential as an innovative oral formulation that is suitable for consumption by elderly patients with dysphagia.

3D Printing of Pediatric Medication: The End of Bad Tasting Oral Liquids?-A Scoping Review

3D printing of pediatric-centered drug formulations can provide suitable alternatives to current treatment options, though further research is still warranted for successful clinical implementation of these innovative drug products. Extensive research has been conducted on the compliance of 3D-printed drug products to a pediatric quality target product profile. The 3D-printed tablets were of particular interest in providing superior dosing and release profile similarity compared to conventional drug manipulation and compounding methods, such as oral liquids. In the future, acceptance of 3D-printed tablets in the pediatric patient population might be better than current treatments due to improved palatability. Further research should focus on expanding clinical knowledge, providing regulatory guidance and expansion of the product range, including dosage form possibilities. Moreover, it should enable the use of diverse good manufacturing practice (GMP)-ready 3D printing techniques for the production of various drug products for the pediatric patient population.

Acceptability of Mebendazole Chewable Tablet in Children Aged 2 to 4 Years in Peru

Soil-transmitted helminthiasis (STH) is among the most common of parasitic infections, affecting vulnerable populations in tropical/subtropical areas globally. In endemic countries, children, a high-risk population, require treatment and preventive interventions. Mebendazole, a WHO-recommended medicine, originally formulated as a tablet that was often crushed for administration to young children unable to swallow it, was reformulated as a chewable tablet. Acceptability is a key aspect for treatment effectiveness in pediatrics. Herein, we used a validated data-driven approach to investigate the acceptability of the 500-mg mebendazole chewable tablet in children aged 2 to 4 years in Peru. Observer-reported outcomes were collected for 182 medicine intakes. Acceptability was scored using the acceptability reference framework: a three-dimensional map juxtaposing “positively accepted” and “negatively accepted” profiles. Results found that the 500-mg mebendazole chewable tablet was classified as “positively accepted” in children aged 2 to 4 years. Acceptability increased with age and some acceptability issue remain for the younger children. Nevertheless, this formulation was considerably better accepted than the conventional tablets regardless of treatment in young children. This chewable formulation appears to be an appropriate alternative to the hard tablet of mebendazole for treatment of STH and preventive interventions in children aged 2 to 4 years.

Orodispersible tablets for pediatric drug delivery: current challenges and recent advances

INTRODUCTION

Child appropriate dosage forms are indispensable in modern medicine and are a prerequisite for successful pediatric drug therapy. For years, experts have called for a paradigm shift, from liquid dosage forms to novel oral solid dosage forms. This review aims to shed light on recent developments in Orodispersible tablets (ODTs) and mini-tablets (ODMTs).

AREAS COVERED

This review focuses on the presentation and critical discussion of current challenges as well as recent advances in ODTs for pediatric drug delivery. Highlighted aspects are the evidence for acceptability by children, e.g. in comparison to other dosage forms, and limitations given by tablet size at different ages, as well as advances in special ODT formulations (taste masking, modified release, enabling formulations).

EXPERT OPINION

It is the authors' belief that OD(M)Ts have significant potential as dosage forms in pediatric therapy that has not yet been fully exploited. The reasons for this are, first, that the number of direct acceptance studies is extremely low and the resulting knowledge is therefore rather anecdotal. Despite the high relevance, there seems to be reluctance both in the therapeutic use and conduction of respective studies in children. However, if one combines the knowledge from the few existing studies, surveys, and from approved products, it becomes apparent that so far there is no evidence on limitations of the use of ODTs in pediatric patients.

I Spy with My Little Eye: A Paediatric Visual Preferences Survey of 3D Printed Tablets

3D printing (3DP) in the pharmaceutical field is a disruptive technology that allows the preparation of personalised medicines at the point of dispensing. The paediatric population presents a variety of pharmaceutical formulation challenges such as dose flexibility, patient compliance, taste masking and the fear or difficulty to swallow tablets, all factors that could be overcome using the adaptable nature of 3DP. User acceptability studies of 3D printed formulations have been previously carried out in adults; however, feedback from children themselves is essential in establishing the quality target product profile towards the development of age-appropriate medicines. The aim of this study was to investigate the preference of children for different 3D printed tablets (Printlets™) as an important precursor to patient acceptability studies. Four different 3DP technologies; digital light processing (DLP), selective laser sintering (SLS), semi-solid extrusion (SSE) and fused deposition modeling (FDM) were used to prepare placebo printlets with similar physical attributes including size and shape. A single-site, two-part survey was completed with participants aged 4-11 years to determine their preference and opinions based on visual inspection of the printlets. A total of 368 participants completed an individual open questionnaire to visually select the best and worst printlet, and 310 participants completed further non-compulsory open questions to elaborate on their choices. Overall, the DLP printlets were the most visually appealing to the children (61.7%) followed by the SLS printlets (21.2%), and with both the FDM (5.4%) and SSE (11.7%) printlets receiving the lowest scores. However, after being informed that the SSE printlets were chewable, the majority of participants changed their selection and favoured this printlet, despite their original choice, in line with children's preference towards chewable dosage forms. Participant age and sex displayed no significant differences in printlet selection. Printlet descriptions were grouped into four distinct categories; appearance, perceived taste, texture and familiarity, and were found to be equally important when creating a quality target product profile for paediatric 3D printed formulations. This study is the first to investigate children's perceptions of printlets, and the findings aim to provide guidance for further development of paediatric-appropriate medicines using different 3DP technologies.

Current opinions and recommendations of paediatric healthcare professionals - The importance of tablets: Emerging orally disintegrating versus traditional tablets

The appropriate prescribing of paediatric dosage forms is paramount in providing the desired therapeutic effect alongside successful medication adherence with the paediatric population. Often it is the opinion of the healthcare practitioner that dictates which type of dosage form would be most appropriate for the paediatric patient, with liquids being both the most commonly available and most commonly used. Orally disintegrating tablets (ODTs) are an emerging dosage form which provide many benefits over traditional dosage forms for paediatric patients, such as rapid disintegration within the oral cavity, and the reduction in the risk of choking. However the opinion and professional use of healthcare practitioners regarding ODT's is not known. This study was designed to assess the opinions of several types of healthcare professionals (n = 41) regarding ODTs, using a survey across two hospital sites. Results reaffirmed the popularity of liquids for prescribing in paediatrics, with 58.0% of participants preferring this dosage form. ODTs emerged as the second most popular dosage form (30.0%), with healthcare practitioners indicating an increasing popularity amongst patients in the hospital setting, belief with 63.0% of practitioners agreeing that many liquid formulations could be substituted with a suitable ODT. The desired properties of an ideal ODT were also identified by healthcare practitioners preferring a small, fast disintegrating tablet (90.2% and 95.1% respectively), with the taste, disintegration time and flavour being the three most important attributes identified (29.5%, 28.7% and 21.7% respectively). This study provided a pragmatic approach in assessing healthcare professional's opinions on ODTs, highlighting the ideas and thoughts of practitioners who are on the frontline of paediatric prescribing and treatment and gave an indication to their preference for ODT properties.